#Region " Mouse Up, Down, Move " Private Sub PicGameMouseDown(sender As Object, e As…
- User
#Region " Mouse Up, Down, Move " Private Sub PicGame_MouseDown(sender As Object, e As MouseEventArgs) Handles picGame.MouseDown If SelectionMode Then HandleSelectionMode(e) Return End If
If e.Button = MouseButtons.Left Then ' Handle actions when the left mouse button is clicked HandleGateClicked(e.X, e.Y) HandleBaddyClicked(e.X, e.Y) ' Ensure this line is added ' Start the selection process isSelecting = True selectionStartPoint = e.Location selectionEndPoint = e.Location selectionRectangle = GetRectangle(selectionStartPoint, selectionEndPoint) ' Reset selection data selectionData = Nothing selectionStartCell = New Point(-1, -1) copiedSelectionData = Nothing copiedSelectionType = "" ' Check if selection starts from a wall or the space between walls Dim offsetX As Integer = (selectionStartPoint.X - INDENT) Mod (SQSizeX + WALL_THICKNESS) Dim offsetY As Integer = (selectionStartPoint.Y - INDENT) Mod (SQSizeY + WALL_THICKNESS) selectionStartedOnWall = (offsetX < WALL_THICKNESS) OrElse (offsetY < WALL_THICKNESS) ' Adjust the selection start point to snap to the grid selectionStartPoint = GetGridAlignedPoint(selectionStartPoint) ' Determine if the user starts the selection on a floor or a wall Dim clickedX As Integer = (e.X - INDENT) \ (SQSizeX + WALL_THICKNESS) Dim clickedY As Integer = (e.Y - INDENT) \ (SQSizeY + WALL_THICKNESS) If clickedX >= 0 AndAlso clickedX < SQCOUNTX AndAlso clickedY >= 0 AndAlso clickedY < SQCOUNTY Then If Not IsMouseOverWall(e.X, e.Y) Then ' The starting selection is on the floor SnapToFloor = True Else ' Starting on a wall SnapToFloor = False End If End If ElseIf e.Button = MouseButtons.Right Then ' Hide properties displays UcBaddyProps.Visible = False krKeys.Visible = False End If If isSelectionReadyToDrag Then If selectionRectangle.Contains(e.Location) Then If e.Button = MouseButtons.Left Then SaveStateForUndo() isDraggingSelection = True selectionOffset = New Point(e.X - selectionRectangle.Location.X, e.Y - selectionRectangle.Location.Y) selectionStartCell = New Point( (selectionRectangle.Location.X - INDENT) \ (SQSizeX + WALL_THICKNESS), (selectionRectangle.Location.Y - INDENT) \ (SQSizeY + WALL_THICKNESS)) picGame.Capture = True Cursor = Cursors.SizeAll ElseIf e.Button = MouseButtons.Right Then ' Show context menu if right-clicking inside the selection Dim menuPosition As Point = e.Location ctmMenu.Show(picGame, menuPosition) End If End If ElseIf isInSelectionMode Then ' Start selecting a new area If e.Button = MouseButtons.Left Then isSelecting = True selectionStartPoint = e.Location selectionEndPoint = e.Location selectionRectangle = GetRectangle(selectionStartPoint, selectionEndPoint) ' Reset selection data selectionData = Nothing selectionStartCell = New Point(-1, -1) copiedSelectionData = Nothing copiedSelectionType = "" ' Reset the cycle isSelectionExpandedToWalls = False isSelectionExpandedToFloors = False ' Adjust the selection start point to snap to the grid selectionStartPoint = GetGridAlignedPoint(selectionStartPoint) ElseIf e.Button = MouseButtons.Right Then If selectionRectangle.Contains(e.Location) Then Dim menuPosition As Point = e.Location ctmMenu.Show(picGame, menuPosition) End If Else TurnOffSelectionMode() End If Else ' Normal mouse down processing If e.Button = MouseButtons.Right Then isRightMouseDown = True rightMouseDownPosition = e.Location rightMouseDownTime = Date.Now If Not isActionInProgress Then isActionInProgress = True SaveStateForUndo() End If ElseIf e.Button = MouseButtons.Left Then isLeftMouseDown = True UpdateHighlight(e.X, e.Y) Dim itemPickedUp As Boolean = False If isMouseInsideGrid Then If Not isActionInProgress Then isActionInProgress = True SaveStateForUndo() End If If highlightedWallX Then ' Handle vertical wall item pickup If highlightedX >= 0 AndAlso highlightedX < verticalWallItems.Length AndAlso highlightedY >= 0 AndAlso highlightedY < verticalWallItems(0).Length Then If verticalWallItems(highlightedX)(highlightedY) IsNot Nothing Then isDraggingItem = True draggedItem = verticalWallItems(highlightedX)(highlightedY) draggedItemIsWall = True draggedItemIsVerticalWall = True draggedItemOriginalX = highlightedX draggedItemOriginalY = highlightedY verticalWallItems(highlightedX)(highlightedY) = Nothing verticalWalls(highlightedX)(highlightedY) = True picGame.Capture = True itemPickedUp = True End If End If ElseIf highlightedWallY Then ' Handle horizontal wall item pickup If highlightedX >= 0 AndAlso highlightedX < horizontalWallItems.Length AndAlso highlightedY >= 0 AndAlso highlightedY < horizontalWallItems(0).Length Then If horizontalWallItems(highlightedX)(highlightedY) IsNot Nothing Then isDraggingItem = True draggedItem = horizontalWallItems(highlightedX)(highlightedY) draggedItemIsWall = True draggedItemIsVerticalWall = False draggedItemOriginalX = highlightedX draggedItemOriginalY = highlightedY horizontalWallItems(highlightedX)(highlightedY) = Nothing horizontalWalls(highlightedX)(highlightedY) = True picGame.Capture = True itemPickedUp = True End If End If Else ' Handle floor item pickup If highlightedX >= 0 AndAlso highlightedX < placedItems.Length AndAlso highlightedY >= 0 AndAlso highlightedY < placedItems(0).Length Then If placedItems(highlightedX)(highlightedY) IsNot Nothing Then isDraggingItem = True draggedItem = placedItems(highlightedX)(highlightedY) draggedItemIsWall = False draggedItemIsVerticalWall = False draggedItemOriginalX = highlightedX draggedItemOriginalY = highlightedY placedItems(highlightedX)(highlightedY) = Nothing picGame.Capture = True itemPickedUp = True End If End If End If If itemPickedUp Then redoStack.Clear() Else ' Add wall or edge style handling If rdoEdge.Checked Then isLeftMouseDown = True SetEdgeStyleAtMousePosition(e.X, e.Y) Else isLeftMouseDown = True AddWallAtMousePosition(e.X, e.Y) End If End If End If End If End If ' Check if the krKeys control is visible and the click is outside the cell with the gate If krKeys.Visible And IsOnGate = False Then Dim clickedX As Integer = (e.X - INDENT) \ (SQSizeX + WALL_THICKNESS) Dim clickedY As Integer = (e.Y - INDENT) \ (SQSizeY + WALL_THICKNESS) If clickedX >= 0 AndAlso clickedX < placedItems.Length AndAlso clickedY >= 0 AndAlso clickedY < placedItems(0).Length Then Dim clickedItem As ItemInfo = placedItems(clickedX)(clickedY) If clickedItem Is Nothing OrElse clickedItem.ImageKey <> "picGate" Then krKeys.Visible = False End If Else krKeys.Visible = False End If End If ' Check if the UcBaddyProps control is visible and the click is outside the cell with the Baddy If UcBaddyProps.Visible AndAlso Not IsOnBaddy Then Dim clickedX As Integer = (e.X - INDENT) \ (SQSizeX + WALL_THICKNESS) Dim clickedY As Integer = (e.Y - INDENT) \ (SQSizeY + WALL_THICKNESS) If clickedX >= 0 AndAlso clickedX < placedItems.Length AndAlso clickedY >= 0 AndAlso clickedY < placedItems(0).Length Then Dim clickedItem As ItemInfo = placedItems(clickedX)(clickedY) If Not clickedItem.ImageKey.StartsWith("picBaddy") Then UcBaddyProps.Visible = False End If Else UcBaddyProps.Visible = False End If End If End Sub Private Sub PicGame_MouseMove(sender As Object, e As MouseEventArgs) Handles picGame.MouseMove isCursorOnPicGame = True If isDraggingSelection Then ' Existing code for dragging selection If isCopying Then If copiedSelectionData Is Nothing Then Return End If Else If selectionData Is Nothing Then CaptureSelectionData() End If End If ' Calculate new cell positions Dim newX As Integer = e.X - selectionOffset.X Dim newY As Integer = e.Y - selectionOffset.Y Dim cellX As Integer = (newX - INDENT) \ (SQSizeX + WALL_THICKNESS) Dim cellY As Integer = (newY - INDENT) \ (SQSizeY + WALL_THICKNESS) ' Ensure cellX and cellY are within bounds If isCopying Then cellX = Math.Max(0, Math.Min(SQCOUNTX - copiedSelectionData.selectionWidth, cellX)) cellY = Math.Max(0, Math.Min(SQCOUNTY - copiedSelectionData.selectionHeight, cellY)) selectionRectangle.Width = (copiedSelectionData.selectionWidth * (SQSizeX + WALL_THICKNESS)) - WALL_THICKNESS selectionRectangle.Height = (copiedSelectionData.selectionHeight * (SQSizeY + WALL_THICKNESS)) - WALL_THICKNESS Else cellX = Math.Max(0, Math.Min(SQCOUNTX - selectionData.selectionWidth, cellX)) cellY = Math.Max(0, Math.Min(SQCOUNTY - selectionData.selectionHeight, cellY)) selectionRectangle.Width = (selectionData.selectionWidth * (SQSizeX + WALL_THICKNESS)) - WALL_THICKNESS selectionRectangle.Height = (selectionData.selectionHeight * (SQSizeY + WALL_THICKNESS)) - WALL_THICKNESS End If ' Update selection rectangle position selectionRectangle.X = INDENT + (cellX * (SQSizeX + WALL_THICKNESS)) selectionRectangle.Y = INDENT + (cellY * (SQSizeY + WALL_THICKNESS)) ' Store cell positions for use in MouseUp draggedSelectionCellX = cellX draggedSelectionCellY = cellY ElseIf isDraggingItem Then ' Update the mouse position to the current cursor position mouseX = e.X mouseY = e.Y ' Snap the item to the nearest wall and center it UpdateHighlight(e.X, e.Y) If draggedItemIsWall Then If draggedItemIsVerticalWall Then mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) + 4 mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeY \ 2) Else mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeX \ 2) mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) + 4 End If Else mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeX \ 2) mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeY \ 2) End If ElseIf isInSelectionMode Then If isSelecting Then Dim newEndPoint = e.Location ' Adjust the snap behavior based on where we started the selection If SnapToFloor Then selectionStartPoint = GetGridAlignedPoint(selectionStartPoint) newEndPoint = GetGridAlignedPoint(newEndPoint, isFloor:=True) Else selectionStartPoint = GetGridAlignedPoint(selectionStartPoint, isWall:=True) newEndPoint = GetGridAlignedPoint(newEndPoint, isWall:=True) End If selectionRectangle = GetRectangle(selectionStartPoint, newEndPoint) End If Else UpdateHighlight(e.X, e.Y) If isRightMouseDown Then If rdoEdge.Checked Then If isMouseInsideGrid Then RemoveEdgeStyleAtMousePosition(e.X, e.Y) End If Else Dim deltaX As Integer = e.X - rightMouseDownPosition.X Dim deltaY As Integer = e.Y - rightMouseDownPosition.Y Dim distanceSquared As Integer = (deltaX * deltaX) + (deltaY * deltaY) If distanceSquared > CLICK_DRAG_THRESHOLD_SQUARED Then RemoveObjectAtMousePosition(e.X, e.Y, removeWalls:=True, removeItems:=False) End If End If End If If isLeftMouseDown Then If rdoEdge.Checked Then If isMouseInsideGrid Then SetEdgeStyleAtMousePosition(e.X, e.Y) End If Else AddWallAtMousePosition(e.X, e.Y) End If End If End If UpdateStatusBar(e.X, e.Y) End Sub Private Sub PicGame_MouseUp(sender As Object, e As MouseEventArgs) Handles picGame.MouseUp If isDraggingSelection Then ' Completing selection dragging If e.Button = MouseButtons.Left Then ' Save the state before modifying the data model If Not isRestoringState Then SaveStateForUndo() End If isDraggingSelection = False picGame.Capture = False Cursor = Cursors.Default If selectionRectangle.IsEmpty Then Return End If ' When the mouse is released, we don’t change the selection rectangle. Use the stored ' selection data and the adjusted rectangle from when it was being drawn. ' Use the captured selection data to snap to the grid. Dim startCell As New Point( (selectionRectangle.X - INDENT) \ (SQSizeX + WALL_THICKNESS), (selectionRectangle.Y - INDENT) \ (SQSizeY + WALL_THICKNESS)) PasteSelectionDataTo(startCell, False, copiedSelectionType = "Edge") isCopying = False isSelectionReadyToDrag = False ' Reset selection-related variables to prevent issues with future operations selectionData = Nothing selectionStartCell = New Point(-1, -1) copiedSelectionData = Nothing copiedSelectionType = "" isCopying = False isSelectionReadyToDrag = False isDraggingSelection = False ' Clear the redo stack since we've made a new change redoStack.Clear() End If ElseIf isInSelectionMode AndAlso isSelecting Then If e.Button = MouseButtons.Left Then ' Finalizing the selection rectangle isSelecting = False selectionEndPoint = e.Location ' Finalize selection snapping based on the type of click selectionEndPoint = If(SnapToFloor, GetGridAlignedPoint(selectionEndPoint, isFloor:=True), GetGridAlignedPoint(selectionEndPoint, isWall:=True)) selectionRectangle = GetRectangle(selectionStartPoint, selectionEndPoint) ' Check if the selection needs to be adjusted selectionRectangle = AdjustSelectionRectangleToWalls(selectionRectangle) ' Reset selection-related variables selectionData = Nothing selectionStartCell = New Point(-1, -1) copiedSelectionData = Nothing copiedSelectionType = "" isCopying = False isSelectionReadyToDrag = False isDraggingSelection = False If selectionRectangle.IsEmpty Then TurnOffSelectionMode() End If End If Else ' Normal mouse up processing If e.Button = MouseButtons.Left Then If isDraggingItem Then ' Save the state before modifying the data model If Not isRestoringState Then SaveStateForUndo() End If isDraggingItem = False picGame.Capture = False Cursor.Current = Cursors.Default ' Snap the item to the grid position UpdateHighlight(e.X, e.Y) If isMouseInsideGrid Then If draggedItemIsWall Then If draggedItemIsVerticalWall Then If highlightedX >= 0 AndAlso highlightedX < verticalWallItems.Length AndAlso verticalWallItems(highlightedX) IsNot Nothing AndAlso highlightedY >= 0 AndAlso highlightedY < verticalWallItems(0).Length Then If Not IsVerticalWallConnectedToEdge(New Point(highlightedX, highlightedY)) OrElse IsFlipperItem(draggedItem.ImageKey) Then verticalWallItems(highlightedX)(highlightedY) = draggedItem verticalWalls(highlightedX)(highlightedY) = False Else ReturnItemToOriginalLocation() End If End If Else If highlightedX >= 0 AndAlso highlightedX < horizontalWallItems.Length AndAlso horizontalWallItems(highlightedX) IsNot Nothing AndAlso highlightedY >= 0 AndAlso highlightedY < horizontalWallItems(0).Length Then If Not IsHorizontalWallConnectedToEdge(New Point(highlightedX, highlightedY)) OrElse IsFlipperItem(draggedItem.ImageKey) Then horizontalWallItems(highlightedX)(highlightedY) = draggedItem horizontalWalls(highlightedX)(highlightedY) = False Else ReturnItemToOriginalLocation() End If End If End If Else ' Existing code for placing non-wall items If highlightedX >= 0 AndAlso highlightedX < placedItems.Length AndAlso highlightedY >= 0 AndAlso highlightedY < placedItems(0).Length Then placedItems(highlightedX)(highlightedY) = draggedItem End If End If Else ReturnItemToOriginalLocation() End If End If isLeftMouseDown = False isActionInProgress = False ElseIf e.Button = MouseButtons.Right Then If isRightMouseDown Then isRightMouseDown = False If rdoEdge.Checked Then UpdateHighlight(e.X, e.Y) If isMouseInsideGrid Then If Not highlightedWallX AndAlso Not highlightedWallY Then If highlightedX >= 0 AndAlso highlightedX < SQCOUNTX AndAlso highlightedY >= 0 AndAlso highlightedY < SQCOUNTY Then floorsUseEdgeStyle(highlightedX)(highlightedY) = False End If End If End If Else Dim deltaX As Integer = e.X - rightMouseDownPosition.X Dim deltaY As Integer = e.Y - rightMouseDownPosition.Y Dim distanceSquared As Integer = (deltaX * deltaX) + (deltaY * deltaY) If distanceSquared < CLICK_DRAG_THRESHOLD_SQUARED Then RemoveObjectAtMousePosition(e.X, e.Y, removeWalls:=False, removeItems:=True) End If End If isActionInProgress = False End If ' Check if the right-click is outside the selected area If isInSelectionMode AndAlso Not selectionRectangle.Contains(e.Location) Then TurnOffSelectionMode() End If End If End If End Sub Private Sub Form_MouseMove(sender As Object, e As MouseEventArgs) Handles Me.MouseMove Dim screenPos As Point = PointToScreen(New Point(e.X, e.Y)) Dim picGameClientPoint As Point = picGame.PointToClient(screenPos) isCursorOnPicGame = picGame.ClientRectangle.Contains(picGameClientPoint) If isDraggingItem Then mouseX = picGameClientPoint.X mouseY = picGameClientPoint.Y If isCursorOnPicGame Then UpdateHighlight(mouseX, mouseY) isMouseInsideGrid = True ' Snap the item to the nearest wall and center it If draggedItemIsWall Then If draggedItemIsVerticalWall Then mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) + 4 mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeY \ 2) Else mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeX \ 2) mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) + 4 End If Else mouseX = INDENT + (highlightedX * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeX \ 2) mouseY = INDENT + (highlightedY * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) + (SQSizeY \ 2) End If Else isMouseInsideGrid = False End If ' Invalidate only the picGame control End If ' Force the highlight color to toggle based on mouse movement Dim currentTime As Date = Date.Now If (currentTime - lastMouseMoveTime).TotalMilliseconds >= DEBOUNCE_INTERVAL Then highlightColor = If(highlightColor = Color.Black, Color.White, Color.Black) lastMouseMoveTime = currentTime End If UpdateStatusBar(e.X, e.Y) End Sub Private Sub Form_MouseUp(sender As Object, e As MouseEventArgs) Handles Me.MouseUp If isDraggingItem AndAlso e.Button = MouseButtons.Left Then ' Before modifying the data model, save the state If Not isRestoringState Then SaveStateForUndo() End If isDraggingItem = False Capture = False Cursor.Current = Cursors.Default Dim screenPos As Point = PointToScreen(New Point(e.X, e.Y)) Dim picGameClientPoint As Point = picGame.PointToClient(screenPos) If picGame.ClientRectangle.Contains(picGameClientPoint) Then mouseX = picGameClientPoint.X mouseY = picGameClientPoint.Y UpdateHighlight(mouseX, mouseY) If isMouseInsideGrid Then If draggedItemIsWall Then If draggedItemIsVerticalWall Then If highlightedX >= 0 AndAlso highlightedX < verticalWallItems.Length AndAlso verticalWallItems(highlightedX) IsNot Nothing AndAlso highlightedY >= 0 AndAlso highlightedY < verticalWallItems(0).Length Then If Not IsVerticalWallConnectedToEdge(New Point(highlightedX, highlightedY)) OrElse IsFlipperItem(draggedItem.ImageKey) Then verticalWallItems(highlightedX)(highlightedY) = draggedItem verticalWalls(highlightedX)(highlightedY) = False Else ReturnItemToOriginalLocation() End If End If Else If highlightedX >= 0 AndAlso highlightedX < horizontalWallItems.Length AndAlso horizontalWallItems(highlightedX) IsNot Nothing AndAlso highlightedY >= 0 AndAlso highlightedY < horizontalWallItems(0).Length Then If Not IsHorizontalWallConnectedToEdge(New Point(highlightedX, highlightedY)) OrElse IsFlipperItem(draggedItem.ImageKey) Then horizontalWallItems(highlightedX)(highlightedY) = draggedItem horizontalWalls(highlightedX)(highlightedY) = False Else ReturnItemToOriginalLocation() End If End If End If Else ' Existing code for placing non-wall items If highlightedX >= 0 AndAlso highlightedX < placedItems.Length AndAlso highlightedY >= 0 AndAlso highlightedY < placedItems(0).Length Then placedItems(highlightedX)(highlightedY) = draggedItem End If End If Else ReturnItemToOriginalLocation() End If Else ReturnItemToOriginalLocation() End If draggedItem = Nothing If isActionInProgress Then isActionInProgress = False redoStack.Clear() End If redoStack.Clear() End If End Sub Private Sub PicBlock_MouseDown(sender As Object, e As MouseEventArgs) Handles picBlock1.MouseDown, picBlock2.MouseDown, picBaddy1.MouseDown, picBaddy2.MouseDown, picLaser1.MouseDown, picLaser2.MouseDown, picFlipper1.MouseDown, picFlipper2.MouseDown, picFlipper3.MouseDown, picFlipper4.MouseDown, picBaddy3.MouseDown, picBaddy4.MouseDown, picCoin.MouseDown, picGate.MouseDown, picKey.MouseDown, picStart.MouseDown, picFinish.MouseDown, picBlockStopper1.MouseDown, picBall.MouseDown, picBlockSwitch.MouseDown, picBomb.MouseDown, picWarp.MouseDown, picWarp2.MouseDown, picWarp3.MouseDown, picVolcano.MouseDown TurnOffSelectionMode() Dim pic = CType(sender, PictureBox) isDraggingItem = True ' Create a new PlacedItem with the ImageKey draggedItem = New ItemInfo(pic.Name, New Point(0, 0), Guid.NewGuid.ToString, isDoodad:=IsDoodadItem(pic.Name)) ' Determine if it's a wall item draggedItemIsWall = IsVerticalItem(pic.Name) OrElse IsHorizontalItem(pic.Name) draggedItemIsVerticalWall = IsVerticalItem(pic.Name) ' Since it's being dragged from the toolbox, there is no original position draggedItemOriginalX = -1 draggedItemOriginalY = -1 ' Capture the mouse events at the form level Capture = True Cursor.Current = Cursors.Hand ' Initialize the mouse position to the current cursor position Dim mousePos = picGame.PointToClient(Cursor.Position) mouseX = mousePos.X mouseY = mousePos.Y End Sub#End Region Public Class ItemInfo Public Property ImageKey As String ' Type of image or item Public Property Location As Point ' Grid location of the item Public Property KeysRequiredToOpen As Integer = 1 ' Number of keys required to open, default to 1 Public Property IsUnlocked As Boolean ' New property to track if the gate is unlocked Public Property IsDoodad As Boolean ' New property to distinguish Doodads Public Property Baddies As New List(Of BaddyInfo) ' Collection of baddies Public Property UniqueId As String ' Unique identifier for the item
' Constructor to initialize ItemInfo Public Sub New(imageKey As String, location As Point, Optional uniqueId As String = Nothing, Optional keysRequired As Integer = 1, Optional isDoodad As Boolean = False) Me.ImageKey = imageKey Me.Location = location Me.UniqueId = If(uniqueId, Guid.NewGuid().ToString()) ' Generate a unique ID if not provided KeysRequiredToOpen = keysRequired IsUnlocked = False ' Initialize as not unlocked Me.IsDoodad = isDoodad End Sub ' Method to convert this object into PlacedItemData (used for saving or serialization) Public Function ToPlacedItemData() As PlacedItemData Return New PlacedItemData() With { .ImageKey = ImageKey, .KeysRequiredToOpen = KeysRequiredToOpen, .Baddies = Baddies.ToList(), .UniqueId = UniqueId } End Function ' Method to clone the ItemInfo object Public Function Clone() As ItemInfo Return New ItemInfo(Me.ImageKey, Me.Location, Me.UniqueId, Me.KeysRequiredToOpen, Me.IsDoodad) With { .IsUnlocked = Me.IsUnlocked, .Baddies = New List(Of BaddyInfo)(Me.Baddies) } End FunctionEnd Class Partial Public Class FrmDesigner
' Variables related to selection and ctmMenu Private isCursorOnPicGame As Boolean = False Private selectionStartedOnWall As Boolean Private SelectionType As String Private isSelectionReadyToDrag As Boolean = False Private isDraggingSelection As Boolean = False Private selectionOffset As Point ' The offset between mouse position and selection rectangle origin Private selectionData As SelectionData Private selectionStartCell As Point ' The grid cell coordinates corresponding to selectionRectangle's original position Private isRightMouseDown As Boolean = False Private isLeftMouseDown As Boolean = False Private isMouseInsideGrid As Boolean = False Private isSelecting As Boolean = False Private isInSelectionMode As Boolean = False Private selectionStartPoint As Point Private selectionEndPoint As Point Private selectionRectangle As Rectangle Private copiedSelectionData As SelectionData Private copiedSelectionType As String Private isCopying As Boolean = False Private isSelectionExpandedToWalls As Boolean = False Private isSelectionExpandedToFloors As Boolean = False#Region " Select "
' Methods related to ctmMenu Private Sub BtnSelect_Click(sender As Object, e As EventArgs) Handles btnSelect.Click If isInSelectionMode Then ' Exiting selection mode isInSelectionMode = False isSelecting = False isSelectionReadyToDrag = False selectionRectangle = Rectangle.Empty picGame.Cursor = Cursors.Default picGame.Invalidate() Else ' Entering selection mode isInSelectionMode = True isSelecting = False isSelectionReadyToDrag = False selectionRectangle = Rectangle.Empty picGame.Cursor = Cursors.Cross End If End Sub Private Sub SelectAllItemsOfType(ParamArray itemKeys As String()) Dim selectedPoints As New List(Of Point) For x As Integer = 0 To SQCOUNTX - 1 For y As Integer = 0 To SQCOUNTY - 1 Dim localX As Integer = x Dim localY As Integer = y If placedItems(localX)(localY) IsNot Nothing AndAlso Array.Exists(itemKeys, Function(key) placedItems(localX)(localY).ImageKey = key) Then selectedPoints.Add(New Point(localX, localY)) End If Next Next If selectedPoints.Count > 0 Then Dim minX = selectedPoints.Min(Function(p) p.X) Dim minY = selectedPoints.Min(Function(p) p.Y) Dim maxX = selectedPoints.Max(Function(p) p.X) Dim maxY = selectedPoints.Max(Function(p) p.Y) selectionRectangle = New Rectangle( INDENT + (minX * (SQSizeX + WALL_THICKNESS)), INDENT + (minY * (SQSizeY + WALL_THICKNESS)), ((maxX - minX + 1) * (SQSizeX + WALL_THICKNESS)) - WALL_THICKNESS, ((maxY - minY + 1) * (SQSizeY + WALL_THICKNESS)) - WALL_THICKNESS) isInSelectionMode = True Cursor = Cursors.Cross picGame.Invalidate() End If End Sub#End Region
#Region " ctmMenu Opened, ctmMenu Closed "
Private Sub ctmMenu_Opened(sender As Object, e As EventArgs) Handles ctmMenu.Opened AddHandler ctmMenu.Closed, AddressOf ctmMenu_Closed ' Check the selection area If selectionRectangle.IsEmpty Then ' Disable the Clear, Copy, Move menus if there's no selection mnuClear.Enabled = False mnuCopy.Enabled = False Return Else mnuClear.Enabled = True mnuCopy.Enabled = True End If ' Capture the selection data if not already captured If selectionData Is Nothing Then CaptureSelectionData() End If ' Initialize booleans for item categories Dim hasEdge As Boolean = False Dim hasBaddies As Boolean = False Dim hasBlockStoppers As Boolean = False Dim hasBlocks As Boolean = False Dim hasCoins As Boolean = False Dim hasKeys As Boolean = False Dim hasWarps As Boolean = False Dim hasFlippers As Boolean = False Dim hasLasers As Boolean = False Dim hasWalls As Boolean = False ' Loop through the selection data For x As Integer = 0 To selectionData.selectionWidth - 1 For y As Integer = 0 To selectionData.selectionHeight - 1 ' Check Edge If selectionData.floorsUseEdgeStyle(x)(y) Then hasEdge = True End If ' Check placedItems Dim placedItem As ItemInfo = selectionData.placedItems(x)(y) If placedItem IsNot Nothing Then Dim imageKey As String = placedItem.ImageKey If IsBaddieItem(imageKey) Then hasBaddies = True ElseIf IsBlockStopperItem(imageKey) Then hasBlockStoppers = True ElseIf IsBlockItem(imageKey) Then hasBlocks = True ElseIf IsCoinItem(imageKey) Then hasCoins = True ElseIf IsKeyItem(imageKey) Then hasKeys = True ElseIf IsWarpItem(imageKey) Then hasWarps = True ElseIf isFlipperItems(imageKey) Then hasFlippers = True ElseIf IsLaserItem(imageKey) Then hasLasers = True End If End If Next Next ' Check vertical walls and wall items If selectionData.verticalWalls IsNot Nothing Then For x As Integer = 0 To selectionData.verticalWalls.Length - 1 For y As Integer = 0 To selectionData.verticalWalls(x).Length - 1 If selectionData.verticalWalls(x)(y) Then hasWalls = True End If Dim wallItem As ItemInfo = selectionData.verticalWallItems(x)(y) If wallItem IsNot Nothing Then Dim imageKey As String = wallItem.ImageKey If isFlipperItems(imageKey) Then hasFlippers = True ElseIf IsLaserItem(imageKey) Then hasLasers = True End If End If Next Next End If ' Check horizontal walls and wall items If selectionData.horizontalWalls IsNot Nothing Then For x As Integer = 0 To selectionData.horizontalWalls.Length - 1 For y As Integer = 0 To selectionData.horizontalWalls(x).Length - 1 If selectionData.horizontalWalls(x)(y) Then hasWalls = True End If Dim wallItem As ItemInfo = selectionData.horizontalWallItems(x)(y) If wallItem IsNot Nothing Then Dim imageKey As String = wallItem.ImageKey If isFlipperItems(imageKey) Then hasFlippers = True ElseIf IsLaserItem(imageKey) Then hasLasers = True End If End If Next Next End If ' Set enabled state of menu items in Clear menu mnuClearEdge.Enabled = hasEdge mnuClearBaddies.Enabled = hasBaddies mnuClearBlockStoppers.Enabled = hasBlockStoppers mnuClearBlocks.Enabled = hasBlocks mnuClearCoins.Enabled = hasCoins mnuClearKeys.Enabled = hasKeys mnuClearWarps.Enabled = hasWarps mnuClearFlippers.Enabled = hasFlippers mnuClearLasers.Enabled = hasLasers mnuClearWalls.Enabled = hasWalls mnuClearAll.Enabled = True ' "Clear All" is always enabled End Sub Private Sub ctmMenu_Closed(sender As Object, e As ToolStripDropDownClosedEventArgs) If isInSelectionMode Then Dim menuPosition = picGame.PointToClient(MousePosition) ctmMenu.Show(picGame, menuPosition) End If End Sub#End Region #Region " Copy " Private Sub mnuCopy_Click(sender As Object, e As EventArgs) Handles mnuCopy.Click If Not isRestoringState Then SaveStateForUndo() If selectionRectangle.IsEmpty Then Debug.WriteLine("selectionRectangle is empty. Cannot copy.") Return End If
' Capture the selection data CaptureSelectionData() If selectionData Is Nothing Then Debug.WriteLine("selectionData is Nothing after capture. Cannot copy.") Return End If Debug.WriteLine("selectionData before cloning: " & If(selectionData Is Nothing, "Nothing", "Not Nothing")) ' Clone the selection data copiedSelectionData = CloneSelectionData(selectionData) If copiedSelectionData Is Nothing Then Debug.WriteLine("copiedSelectionData is Nothing after clone. Cannot copy.") Return End If Debug.WriteLine("copiedSelectionData after cloning: " & If(copiedSelectionData Is Nothing, "Nothing", "Not Nothing")) isCopying = True ' Extract the selection type from the sender's name Dim menuItem = CType(sender, ToolStripMenuItem) copiedSelectionType = menuItem.Name.Substring(7) ' Remove the "mnuCopy" prefix ' Filter the selection data based on the selection type Select Case copiedSelectionType Case "All" ' Do nothing, keep all items Case "Baddies" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Baddies")) Case "BlockStoppers" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("BlockStoppers")) Case "Blocks" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Blocks")) Case "Coins" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Coins")) Case "Keys" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Keys")) Case "Warps" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Warps")) Case "Flippers" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Flippers")) Case "Lasers" FilterSelectionDataForItemTypes(selectionData, GetItemKeysForType("Lasers")) Case "Edge" ' Handle edge separately if needed Case "Walls" ' Handle walls separately if needed Case Else ' Handle other cases End Select ' Proceed with copying the filtered selection data copiedSelectionData = CloneSelectionData(selectionData) ' Get cursor position in picGame coordinates Dim cursorPosInPicGame = picGame.PointToClient(Cursor.Position) ' Adjust selection rectangle to center on the cursor selectionRectangle.Location = New Point( cursorPosInPicGame.X - (selectionRectangle.Width \ 2), cursorPosInPicGame.Y - (selectionRectangle.Height \ 2) ) ' Recalculate selectionOffset based on new rectangle position selectionOffset = New Point( Cursor.Position.X - picGame.PointToScreen(selectionRectangle.Location).X, Cursor.Position.Y - picGame.PointToScreen(selectionRectangle.Location).Y ) ' Automatically start dragging the selection isSelectionReadyToDrag = True isDraggingSelection = True picGame.Capture = True Cursor = Cursors.SizeAll picGame.Invalidate() ' Handle pasting logic AddHandler picGame.MouseUp, Sub(mouseSender As Object, mouseEventArgs As MouseEventArgs) ' Paste data PasteSelectionDataTo(New Point(cursorPosInPicGame.X, cursorPosInPicGame.Y), False, copiedSelectionType = "Edge") isSelectionReadyToDrag = False isDraggingSelection = False picGame.Capture = False Cursor = Cursors.Default picGame.Invalidate() End Sub End Sub Private Sub CaptureSelectionData() If selectionRectangle.IsEmpty Then Debug.WriteLine("selectionRectangle is empty. Cannot capture selection data.") Return End If Debug.WriteLine("Capturing selection data...") Debug.WriteLine("selectionData before capture: " & If(selectionData Is Nothing, "Nothing", "Not Nothing")) ' Get start and end cell indices from selection rectangle Dim startCellX As Integer = (selectionRectangle.X - INDENT + (WALL_THICKNESS \ 2)) \ (SQSizeX + WALL_THICKNESS) Dim startCellY As Integer = (selectionRectangle.Y - INDENT + (WALL_THICKNESS \ 2)) \ (SQSizeY + WALL_THICKNESS) Dim endCellX As Integer = (selectionRectangle.Right - INDENT - (WALL_THICKNESS \ 2) - 1) \ (SQSizeX + WALL_THICKNESS) Dim endCellY As Integer = (selectionRectangle.Bottom - INDENT - (WALL_THICKNESS \ 2) - 1) \ (SQSizeY + WALL_THICKNESS) ' Calculate selection dimensions Dim selectionCellWidth As Integer = endCellX - startCellX + 1 Dim selectionCellHeight As Integer = endCellY - startCellY + 1 ' Adjust startCellX and startCellY if negative Dim adjustedStartCellX As Integer = Math.Max(0, startCellX) Dim adjustedStartCellY As Integer = Math.Max(0, startCellY) ' Adjust selection dimensions if start cells were negative selectionCellWidth -= adjustedStartCellX - startCellX selectionCellHeight -= adjustedStartCellY - startCellY ' Adjust end cells if they exceed grid boundaries adjustedStartCellX = Math.Min(adjustedStartCellX, SQCOUNTX - 1) adjustedStartCellY = Math.Min(adjustedStartCellY, SQCOUNTY - 1) selectionCellWidth = Math.Min(selectionCellWidth, SQCOUNTX - adjustedStartCellX) selectionCellHeight = Math.Min(selectionCellHeight, SQCOUNTY - adjustedStartCellY) ' Initialize selectionData selectionData = New SelectionData With { .selectionWidth = selectionCellWidth, .selectionHeight = selectionCellHeight } ' Capture placed items and floor edge styles selectionData.placedItems = New ItemInfo(selectionData.selectionWidth - 1)() {} selectionData.floorsUseEdgeStyle = New Boolean(selectionData.selectionWidth - 1)() {} For x As Integer = 0 To selectionData.selectionWidth - 1 selectionData.placedItems(x) = New ItemInfo(selectionData.selectionHeight - 1) {} selectionData.floorsUseEdgeStyle(x) = New Boolean(selectionData.selectionHeight - 1) {} For y As Integer = 0 To selectionData.selectionHeight - 1 Dim srcX As Integer = adjustedStartCellX + x Dim srcY As Integer = adjustedStartCellY + y If srcX >= 0 AndAlso srcX < SQCOUNTX AndAlso srcY >= 0 AndAlso srcY < SQCOUNTY Then selectionData.placedItems(x)(y) = placedItems(srcX)(srcY) selectionData.floorsUseEdgeStyle(x)(y) = floorsUseEdgeStyle(srcX)(srcY) Else selectionData.placedItems(x)(y) = Nothing selectionData.floorsUseEdgeStyle(x)(y) = False End If Next Next ' Capture internal vertical walls (excluding boundary walls) If selectionData.selectionWidth > 1 Then Dim numVertWalls As Integer = selectionData.selectionWidth - 2 selectionData.verticalWalls = New Boolean(numVertWalls)() {} selectionData.verticalWallItems = New ItemInfo(numVertWalls)() {} For x As Integer = 0 To numVertWalls selectionData.verticalWalls(x) = New Boolean(selectionData.selectionHeight - 1) {} selectionData.verticalWallItems(x) = New ItemInfo(selectionData.selectionHeight - 1) {} For y As Integer = 0 To selectionData.selectionHeight - 1 Dim srcX As Integer = adjustedStartCellX + x + 1 Dim srcY As Integer = adjustedStartCellY + y If srcX >= 0 AndAlso srcX < verticalWalls.Length AndAlso srcY >= 0 AndAlso srcY < verticalWalls(0).Length Then selectionData.verticalWalls(x)(y) = verticalWalls(srcX)(srcY) selectionData.verticalWallItems(x)(y) = verticalWallItems(srcX)(srcY) Else selectionData.verticalWalls(x)(y) = False selectionData.verticalWallItems(x)(y) = Nothing End If Next Next Else ' No internal vertical walls to capture selectionData.verticalWalls = Nothing selectionData.verticalWallItems = Nothing End If ' Capture internal horizontal walls (excluding boundary walls) If selectionData.selectionHeight > 1 Then Dim numHorizWalls As Integer = selectionData.selectionHeight - 2 selectionData.horizontalWalls = New Boolean(selectionData.selectionWidth - 1)() {} selectionData.horizontalWallItems = New ItemInfo(selectionData.selectionWidth - 1)() {} For x As Integer = 0 To selectionData.selectionWidth - 1 selectionData.horizontalWalls(x) = New Boolean(numHorizWalls) {} selectionData.horizontalWallItems(x) = New ItemInfo(numHorizWalls) {} For y As Integer = 0 To numHorizWalls Dim srcX As Integer = adjustedStartCellX + x Dim srcY As Integer = adjustedStartCellY + y + 1 If srcX >= 0 AndAlso srcX < horizontalWalls.Length AndAlso srcY >= 0 AndAlso srcY < horizontalWalls(0).Length Then selectionData.horizontalWalls(x)(y) = horizontalWalls(srcX)(srcY) selectionData.horizontalWallItems(x)(y) = horizontalWallItems(srcX)(srcY) Else selectionData.horizontalWalls(x)(y) = False selectionData.horizontalWallItems(x)(y) = Nothing End If Next Next Else ' No internal horizontal walls to capture selectionData.horizontalWalls = Nothing selectionData.horizontalWallItems = Nothing End If ' Store the selection start cell selectionStartCell = New Point(adjustedStartCellX, adjustedStartCellY) Debug.WriteLine("selectionData after capture: " & If(selectionData Is Nothing, "Nothing", "Not Nothing")) Debug.WriteLine("Selection data captured successfully.") End Sub Private Sub PasteSelectionDataTo(newCell As Point, removeOldData As Boolean, copyEdge As Boolean) If copiedSelectionData Is Nothing Then Debug.WriteLine("copiedSelectionData is Nothing. Skipping drawing.") Return End If Debug.WriteLine("Pasting selection data...") Debug.WriteLine("copiedSelectionData before paste: " & If(copiedSelectionData Is Nothing, "Nothing", "Not Nothing")) ' Ensure the new position is within bounds newCell.X = Math.Max(0, Math.Min(SQCOUNTX - copiedSelectionData.selectionWidth, newCell.X)) newCell.Y = Math.Max(0, Math.Min(SQCOUNTY - copiedSelectionData.selectionHeight, newCell.Y)) ' Paste placed items and floor edge styles For x As Integer = 0 To copiedSelectionData.selectionWidth - 1 For y As Integer = 0 To copiedSelectionData.selectionHeight - 1 If newCell.X + x < SQCOUNTX AndAlso newCell.Y + y < SQCOUNTY Then If copiedSelectionData.placedItems(x)(y) IsNot Nothing Then placedItems(newCell.X + x)(newCell.Y + y) = copiedSelectionData.placedItems(x)(y) End If If copyEdge AndAlso copiedSelectionData.floorsUseEdgeStyle(x)(y) Then floorsUseEdgeStyle(newCell.X + x)(newCell.Y + y) = True End If End If Next Next ' Paste internal vertical walls, if any If copiedSelectionData.verticalWalls IsNot Nothing AndAlso Not removeOldData Then For x As Integer = 0 To copiedSelectionData.verticalWalls.Length - 1 For y As Integer = 0 To copiedSelectionData.verticalWalls(x).Length - 1 Dim targetX As Integer = newCell.X + x + 1 Dim targetY As Integer = newCell.Y + y If targetX >= 0 AndAlso targetX < verticalWalls.Length AndAlso targetY >= 0 AndAlso targetY < verticalWalls(0).Length Then If copiedSelectionData.verticalWalls(x)(y) Then verticalWalls(targetX)(targetY) = True End If If copiedSelectionData.verticalWallItems(x)(y) IsNot Nothing Then verticalWallItems(targetX)(targetY) = copiedSelectionData.verticalWallItems(x)(y) End If End If Next Next End If ' Paste internal horizontal walls, if any If copiedSelectionData.horizontalWalls IsNot Nothing AndAlso Not removeOldData Then For x As Integer = 0 To copiedSelectionData.horizontalWalls.Length - 1 For y As Integer = 0 To copiedSelectionData.horizontalWalls(x).Length - 1 Dim targetX As Integer = newCell.X + x Dim targetY As Integer = newCell.Y + y + 1 If targetX >= 0 AndAlso targetX < horizontalWalls.Length AndAlso targetY >= 0 AndAlso targetY < horizontalWalls(0).Length Then If copiedSelectionData.horizontalWalls(x)(y) Then horizontalWalls(targetX)(targetY) = True End If If copiedSelectionData.horizontalWallItems(x)(y) IsNot Nothing Then horizontalWallItems(targetX)(targetY) = copiedSelectionData.horizontalWallItems(x)(y) End If End If Next Next End If ' Update the selection rectangle to the new position selectionRectangle = New Rectangle( INDENT + (newCell.X * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2), INDENT + (newCell.Y * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2), (copiedSelectionData.selectionWidth * (SQSizeX + WALL_THICKNESS)) - WALL_THICKNESS, (copiedSelectionData.selectionHeight * (SQSizeY + WALL_THICKNESS)) - WALL_THICKNESS ) ' Remove old data if moving If removeOldData Then ClearSelectedArea() End If picGame.Invalidate() Debug.WriteLine("Pasted selection data successfully.") End Sub Private Function CloneSelectionData(original As SelectionData) As SelectionData Dim clone As New SelectionData With { .selectionWidth = original.selectionWidth, .selectionHeight = original.selectionHeight } ' Clone placedItems with deep copy clone.placedItems = New ItemInfo(original.selectionWidth - 1)() {} For x As Integer = 0 To original.selectionWidth - 1 clone.placedItems(x) = New ItemInfo(original.selectionHeight - 1) {} For y As Integer = 0 To original.selectionHeight - 1 If original.placedItems(x)(y) IsNot Nothing Then clone.placedItems(x)(y) = original.placedItems(x)(y).Clone() End If Next Next ' Clone floorsUseEdgeStyle clone.floorsUseEdgeStyle = original.floorsUseEdgeStyle.Clone() ' Clone verticalWalls and verticalWallItems with deep copy If original.verticalWallItems IsNot Nothing Then clone.verticalWallItems = New ItemInfo(original.verticalWallItems.Length - 1)() {} For x As Integer = 0 To original.verticalWallItems.Length - 1 clone.verticalWallItems(x) = New ItemInfo(original.verticalWallItems(x).Length - 1) {} For y As Integer = 0 To original.verticalWallItems(x).Length - 1 If original.verticalWallItems(x)(y) IsNot Nothing Then clone.verticalWallItems(x)(y) = original.verticalWallItems(x)(y).Clone() End If Next Next End If ' Clone horizontalWalls and horizontalWallItems with deep copy If original.horizontalWallItems IsNot Nothing Then clone.horizontalWallItems = New ItemInfo(original.horizontalWallItems.Length - 1)() {} For x As Integer = 0 To original.horizontalWallItems.Length - 1 clone.horizontalWallItems(x) = New ItemInfo(original.horizontalWallItems(x).Length - 1) {} For y As Integer = 0 To original.horizontalWallItems(x).Length - 1 If original.horizontalWallItems(x)(y) IsNot Nothing Then clone.horizontalWallItems(x)(y) = original.horizontalWallItems(x)(y).Clone() End If Next Next End If Debug.WriteLine("Cloned selection data successfully.") Return clone End Function Private Sub DrawSelectionData(g As Graphics, baseCellX As Integer, baseCellY As Integer, data As SelectionData) Dim xOrigin As Integer = INDENT Dim yOrigin As Integer = INDENT Dim colorMatrix As New Imaging.ColorMatrix With { .Matrix33 = 0.5F ' Set opacity to 50% } Dim imgAttributes As New Imaging.ImageAttributes() imgAttributes.SetColorMatrix(colorMatrix, Imaging.ColorMatrixFlag.Default, Imaging.ColorAdjustType.Bitmap) For x As Integer = 0 To data.selectionWidth - 1 For y As Integer = 0 To data.selectionHeight - 1 If data.placedItems(x)(y) IsNot Nothing Then Dim img As Image = GetImageByKey(data.placedItems(x)(y).ImageKey) If img IsNot Nothing Then ImageAnimator.UpdateFrames(img) Dim xPos As Integer = xOrigin + ((baseCellX + x) * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) Dim yPos As Integer = yOrigin + ((baseCellY + y) * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) Dim destRect As New Rectangle(xPos, yPos, SQSizeX, SQSizeY) g.DrawImage(img, destRect, 0, 0, img.Width, img.Height, GraphicsUnit.Pixel, imgAttributes) End If End If Next Next ' Draw vertical wall items If data.verticalWallItems IsNot Nothing Then For x As Integer = 0 To data.verticalWallItems.Length - 1 For y As Integer = 0 To data.verticalWallItems(x).Length - 1 If data.verticalWallItems(x)(y) IsNot Nothing Then Dim img As Image = GetImageByKey(data.verticalWallItems(x)(y).ImageKey) If img IsNot Nothing Then ImageAnimator.UpdateFrames(img) Dim wallX As Integer = xOrigin + ((baseCellX + x + 1) * (SQSizeX + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) Dim wallY As Integer = yOrigin + ((baseCellY + y) * (SQSizeY + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) Dim wallWidth As Integer = WALL_THICKNESS Dim wallHeight As Integer = SQSizeY Dim newWidth As Integer = img.Width Dim newHeight As Integer = wallHeight Dim centeredX As Integer = wallX + ((wallWidth - newWidth) \ 2) Dim drawRect As New Rectangle(centeredX, wallY, newWidth, newHeight) g.DrawImage(img, drawRect, 0, 0, img.Width, img.Height, GraphicsUnit.Pixel, imgAttributes) End If End If Next Next End If ' Draw horizontal wall items If data.horizontalWallItems IsNot Nothing Then For x As Integer = 0 To data.horizontalWallItems.Length - 1 For y As Integer = 0 To data.horizontalWallItems(x).Length - 1 If data.horizontalWallItems(x)(y) IsNot Nothing Then Dim img As Image = GetImageByKey(data.horizontalWallItems(x)(y).ImageKey) If img IsNot Nothing Then ImageAnimator.UpdateFrames(img) Dim wallX As Integer = xOrigin + ((baseCellX + x) * (SQSizeX + WALL_THICKNESS)) + (WALL_THICKNESS \ 2) Dim wallY As Integer = yOrigin + ((baseCellY + y + 1) * (SQSizeY + WALL_THICKNESS)) - (WALL_THICKNESS \ 2) Dim wallWidth As Integer = SQSizeX Dim wallHeight As Integer = WALL_THICKNESS Dim newWidth As Integer = wallWidth Dim newHeight As Integer = img.Height Dim centeredY As Integer = wallY + ((wallHeight - newHeight) \ 2) Dim drawRect As New Rectangle(wallX, centeredY, newWidth, newHeight) g.DrawImage(img, drawRect, 0, 0, img.Width, img.Height, GraphicsUnit.Pixel, imgAttributes) End If End If Next Next End If End Sub#End Region Private Function IsBaddieItem(imageKey As String) As Boolean Return imageKey = "picBaddy1" OrElse imageKey = "picBaddy2" OrElse imageKey = "picBaddy3" OrElse imageKey = "picBaddy4" End Function
Private Function IsBlockStopperItem(imageKey As String) As Boolean Return imageKey = "picBlockStopper1" End Function Private Function IsBlockItem(imageKey As String) As Boolean Return imageKey = "picBlock1" End Function Private Function IsCoinItem(imageKey As String) As Boolean Return imageKey = "picCoin" End Function Private Function IsKeyItem(imageKey As String) As Boolean Return imageKey = "picKey" End Function Private Function IsWarpItem(imageKey As String) As Boolean Return imageKey = "picWarp" OrElse imageKey = "picWarp2" End Function Private Function isFlipperItems(imageKey As String) As Boolean Return imageKey = "picFlipper1" OrElse imageKey = "picFlipper2" OrElse imageKey = "picFlipper3" OrElse imageKey = "picFlipper4" End Function Private Function IsLaserItem(imageKey As String) As Boolean Return imageKey = "picLaser1" OrElse imageKey = "picLaser2" End Function Private Sub mnuCancel_Click(sender As Object, e As EventArgs) Handles mnuCancel.Click TurnOffSelectionMode() End Sub Private Function GetItemKeysForType(type As String) As String() Select Case type Case "Baddies" Return New String() {"picBaddy1", "picBaddy2", "picBaddy3", "picBaddy4"} Case "BlockStoppers" Return New String() {"picBlockStopper1"} Case "Blocks" Return New String() {"picBlock1"} Case "Coins" Return New String() {"picCoin"} Case "Keys" Return New String() {"picKey"} Case "Warps" Return New String() {"picWarp", "picWarp2"} Case "Flippers" Return New String() {"picFlipper1", "picFlipper2", "picFlipper3", "picFlipper4"} Case "Lasers" Return New String() {"picLaser1", "picLaser2"} Case Else Return New String() {} End Select End Function Private Sub FilterSelectionDataForItemTypes(selectionData As SelectionData, allowedItemKeys As String()) ' Filter placedItems For x As Integer = 0 To selectionData.selectionWidth - 1 For y As Integer = 0 To selectionData.selectionHeight - 1 Dim placedItem As ItemInfo = selectionData.placedItems(x)(y) If placedItem IsNot Nothing AndAlso Not allowedItemKeys.Contains(placedItem.ImageKey) Then selectionData.placedItems(x)(y) = Nothing End If Next Next ' Filter verticalWallItems If selectionData.verticalWallItems IsNot Nothing Then For x As Integer = 0 To selectionData.verticalWallItems.Length - 1 For y As Integer = 0 To selectionData.verticalWallItems(x).Length - 1 Dim wallItem As ItemInfo = selectionData.verticalWallItems(x)(y) If wallItem IsNot Nothing AndAlso Not allowedItemKeys.Contains(wallItem.ImageKey) Then selectionData.verticalWallItems(x)(y) = Nothing End If Next Next End If ' Filter horizontalWallItems If selectionData.horizontalWallItems IsNot Nothing Then For x As Integer = 0 To selectionData.horizontalWallItems.Length - 1 For y As Integer = 0 To selectionData.horizontalWallItems(x).Length - 1 Dim wallItem As ItemInfo = selectionData.horizontalWallItems(x)(y) If wallItem IsNot Nothing AndAlso Not allowedItemKeys.Contains(wallItem.ImageKey) Then selectionData.horizontalWallItems(x)(y) = Nothing End If Next Next End If ' Filter verticalWalls If selectionData.verticalWalls IsNot Nothing Then For x As Integer = 0 To selectionData.verticalWalls.Length - 1 For y As Integer = 0 To selectionData.verticalWalls(x).Length - 1 If Not allowedItemKeys.Contains("Walls") Then selectionData.verticalWalls(x)(y) = False End If Next Next End If ' Filter horizontalWalls If selectionData.horizontalWalls IsNot Nothing Then For x As Integer = 0 To selectionData.horizontalWalls.Length - 1 For y As Integer = 0 To selectionData.horizontalWalls(x).Length - 1 If Not allowedItemKeys.Contains("Walls") Then selectionData.horizontalWalls(x)(y) = False End If Next Next End If End SubEnd Class
Are we implementing the Clone feature in iteminfo?
- Assistant
Yes, the
Clonefeature is indeed implemented in theItemInfoclass within the provided code. TheClonemethod creates a new instance of theItemInfoclass that has the same properties as the original instance, effectively providing a "deep copy" of the object. Here's how it's done:Clone Method in ItemInfo Class
' Method to clone the ItemInfo object Public Function Clone() As ItemInfo Return New ItemInfo(Me.ImageKey, Me.Location, Me.UniqueId, Me.KeysRequiredToOpen, Me.IsDoodad) With { .IsUnlocked = Me.IsUnlocked, ' Copy the unlocked status .Baddies = New List(Of BaddyInfo)(Me.Baddies) ' Assuming BaddyInfo also has a clone method for deep copying } End FunctionExplanation
-
Parameters: The constructor of the new
ItemInfoinstance is called using properties from the current instance (Me), which serves to create an identical copy. -
IsUnlocked Property: The
IsUnlockedstatus is also copied over from the original instance, ensuring that the new clone maintains the same unlock status. -
Baddies Collection: The
Baddieslist, which containsBaddyInfoobjects, is duplicated by creating a newListand passing the originalBaddieslist as a parameter. This means that the references toBaddyInfoobjects are copied, but not necessarily the objects themselves unless theBaddyInfoclass also supports cloning.
Consistency With Other Parts of the Code
- The
Clonefunctionality ensures that if you create a selection of items, you can copy that selection without affecting the original items in the grid. - When capturing selection data (as seen in the CaptureSelectionData method), it makes use of the
CloneSelectionDatamethod to ensure that selection data is copied correctly.
Additional Considerations
If you want complete independence between cloned objects, you would also consider implementing a
Clonemethod in theBaddyInfoclass (if it contains complex properties). This way, eachBaddyInfoinsideBaddieswill also be deeply cloned rather than just copying references, ensuring that the original and cloned instances do not interfere with each other in terms of state changes. -
- User
It's not working though :(
Here's the output
Capturing selection data... selectionData before capture: Not Nothing selectionData after capture: Not Nothing Selection data captured successfully. selectionData before cloning: Not Nothing Cloned selection data successfully. copiedSelectionData after cloning: Not Nothing Cloned selection data successfully. selectionData is Nothing. Skipping drawing. selectionData is Nothing. Skipping drawing. selectionData is Nothing. Skipping drawing. copiedSelectionData is Nothing. Skipping drawing. copiedSelectionData is Nothing. Skipping drawing. copiedSelectionData is Nothing. Skipping drawing.
- Assistant
It seems like the problem lies in how
selectionDataandcopiedSelectionDataare managed throughout the various methods, particularly after cloning and while using or displaying the copied data.Debugging Steps
-
Tracking Data Flow: Based on your output, it appears that while capturing selection data is successful, there are places later in your code that indicate both
selectionDataandcopiedSelectionDataend up beingNothing, leading to those debug messages. -
Check where you clear or reset the selection data: Ensure that there's no code flow after the capture and cloning that inadvertently resets or clears out
selectionDataandcopiedSelectionData. -
Verify the Clone Implementation: Ensure that you are indeed invoking the
Clonemethod properly and that it correctly retains all necessary state for the object, but also ensures it doesn't share references unintentionally.
Key Areas to Validate
1. Resetting Selection Data
You mentioned output such as "selectionData is Nothing. Skipping drawing." after the cloning process. Check around the parts of your code that deal with clearing or resetting data.
- In particular, after a drag operation or pasting, review the logic that resets
selectionData. If it's being set toNothingafter cloning, you'll never see any data.
2. Inspect the CaptureSelectionData Method
Examine how
selectionDatais captured. Ensure that you're properly populating all fields in theSelectionDataobject without interference that could lead to null values later.3. Ensure Cloning Logic Works
After cloning:
-
Ensure the returned clone is not set to
Nothingand that it retains a similar structure:Debug.WriteLine("copiedSelectionData after cloning: " & If(copiedSelectionData Is Nothing, "Nothing", "Not Nothing"))You can add similar debug statements immediately after cloning to test its structure and values.
Example of Troubleshooting Placement
Here's an example of where your issue might occur:
' Somewhere in your mouse-up or paste logic If selectionData Is Nothing Then Debug.WriteLine("selectionData is Nothing. Skipping drawing.") Return End IfMake sure you have proper checks before the assignments and ensure the object you're relying upon remains in scope.
Suggestions to Fix
-
Check Scope and Lifecycle: Track the lifecycle of both
selectionDataandcopiedSelectionData. Make sure they are properly instantiated, populated, and not reset prematurely. -
Use Breakpoints: In the IDE, set breakpoints on places where
selectionDatais captured, cloned, and utilized. Inspect values in the debugger to understand at which step they becomeNothing. -
Debug Log Incrementally: Add debug outputs around conditions and critical operations to see exactly when and where these objects are set to
Nothing. -
Clone Method Validation: Double-check that the
Clonemethod of theSelectionDataclass (if it exists) properly clones all properties, especially nested collections. -
Validate Drawing Logic: Track where the selection and copied selection data are used for drawing. Also, ensure that after cloning, you maintain the logic flow to keep data available for use.
Conclusion
By checking the lifecycle of the selection and copied data objects, ensuring they are not inadvertently altered, and validating the object cloning processes, you should be able to resolve the issue where cloning times out or results in unexpected
Nothingvalues later in the workflow. If problems persist, consider isolating the issue into a reduced test case to track the flow more manageably. -