how to make a Phasing through Walls from super Mario Galaxy effect on Adobe After…
- User
how to make a Phasing through Walls from super Mario Galaxy effect on Adobe After Effects 2021 v18.0.0.39 windows 10 step by step tutorial?
- Assistant
Creating a "Phasing through Walls" effect similar to what is seen in Super Mario Galaxy using Adobe After Effects 2021 (v18.0.0.39) can involve a combination of transparency effects, displacement mapping, and masking. Below is a step-by-step guide that explains how you can achieve this effect:
Step-by-step Tutorial: Phasing through Walls Effect
Step 1: Set Up Your Composition
- Open Adobe After Effects and create a new composition (
Ctrl+Non Windows).- Set your desired resolution (e.g., 1920x1080) and frame rate (e.g., 30 FPS).
- Name your composition (e.g., "Phasing Through Wall Effect").
- Import your video clips into the Project panel (
Ctrl+Ito import).- You'll need two layers: one for the "wall" and another for the "character or object" going through the wall.
Step 2: Arrange Your Layers
- Drag the "wall" layer into your timeline. This is the layer where the character will phase through.
- Place the "character" layer above the "wall" layer in the timeline.
- Align both layers in the timeline so that their motion seems synchronized.
Step 3: Mask the Wall
- Select the "wall" layer in the timeline.
- Use the
Pen Tool(G) to create a mask that outlines the area where the character will phase through. This defines what part of the wall gets affected.- Tip: Adjust the mask path as necessary to fit the animation.
- Feather the mask to make the transition smoother.
- Open the
Mask Propertiesby selecting the wall layer and hittingMM(double-pressM). - Increase the
Mask Feather(e.g., 25–50 pixels).
- Open the
Step 4: Create the "Phasing" Transparency Effect
- Select the "character" layer.
- In the
Effects & Presetspanel, search for the “Opacity” property.- Keyframe the opacity so that the character fades out and back in as they pass through the wall.
- For instance:
- Start: Opacity = 100 (fully visible).
- Midpoint: Opacity = 0 (disappears within the wall).
- End: Opacity = 100 (fully visible again).
Step 5: Add Distortion to the Wall
- Select the "wall" layer.
- Go to
Effects & Presetsand search for “Displacement Map” (Effect → Distort → Displacement Map). - Apply the Displacement Map effect to the "wall" layer.
- In the
Effect Controlspanel:- Set the "Displacement Map Layer" to the "character" layer.
- Adjust the
Horizontal DisplacementandVertical Displacementvalues to create a ripple effect as the character phases through. - Keyframe the displacement values so they animate in sync with the character's motion through the wall.
Step 6: Add Glow or Light Effects (Optional)
- If you'd like to add a glow effect to the phasing area:
- Duplicate the "character" layer (
Ctrl+D). - Apply the Glow effect (
Effect → Stylize → Glow) to the duplicated layer. - Adjust the glow intensity and radius to make it look like energy is being emitted from the wall during the phasing.
- Duplicate the "character" layer (
Step 7: Fine-Tuning and Polishing
- Adjust the timing of the opacity and displacement animations so they align perfectly with the character's movement.
- Add motion blur to the layers for a realistic transition.
- Enable motion blur by selecting the "Toggle Switches/Modes" button and checking the "Motion Blur" icon for the relevant layers.
- Turn on "Enable Motion Blur" at the top of the timeline.
- If needed, add sound effects (e.g., whooshing audio or sparkling ambiance) to enhance the visual effect.
Step 8: Preview and Export
- Preview your animation by pressing the spacebar and ensure everything looks seamless.
- Export your final composition:
- Go to
File → Export → Add to Render Queue. - Choose your desired output settings and click
Render.
- Go to
That's it! You now have a "Phasing Through Walls" effect inspired by Super Mario Galaxy. You can modify these steps to add unique touches, like particle effects or more elaborate distortions, to make the effect more dynamic.
- Open Adobe After Effects and create a new composition (
- User
how to make a Phasing through Walls from super Mario Galaxy effect on Adobe After Effects 2021 v18.0.0.39 windows 10 step by step tutorial? with scene video
- Assistant
Creating a "phasing through walls" effect with reference to Super Mario Galaxy using Adobe After Effects involves compositing, masking, and effects manipulation within the software. Below is a complete step-by-step guide that you can follow for a video-based scene. This assumes you have video footage or assets for the scene prepared (character layer and wall background).
What You Will Need:
- A video of your character or subject moving toward and through the wall.
- A separate video or still image of the wall as a background (it should be clean--without the character in it).
Step-by-Step Guide: Phasing Through Walls Effect
Step 1: Import Your Assets
- Open Adobe After Effects 2021.
- Import your scene footage, including:
- The background wall video or still image.
- The character clip (shot ideally on a green screen or rotoscoped for separation).
- Drag your assets into a new composition:
Ctrl + Nto create the composition or drag and drop your assets into the timeline.
Step 2: Position Your Layers
- Place the wall background layer at the bottom of your timeline (Layer 1).
- Place your character layer (Layer 2) above the wall in the timeline. Ensure the character is moving toward the wall in your scene.
Step 3: Remove the Background of Your Character Layer
If your footage has the character shot on a green screen:
- Key Out the Background:
- Select the character layer.
- Go to
Effect → Keying → Keylight (1.2). - Use the eyedropper tool in the effect settings to select the green screen.
- Fine-tune the keying (e.g., adjust the "Screen Grain" and "Clip Blacks" to make the character's outline clean).
If there is no green screen (rotoscoping):
- Use the Roto Brush Tool:
- Double-click your character layer to open it in its own Layer panel.
- Select the Roto Brush Tool (
Alt + W). - Paint over your character to isolate them from the background. Refine the mask edges as needed (
Alt+ drag on the edges).
Step 4: Add a Mask to the Wall Layer to Define the Phasing Area
- Select the wall layer in the timeline.
- Use the Pen Tool (
G) and draw a mask that tracks the area where the character will "phase" through the wall.- Make sure this mask surrounds the part of the wall where transparency or distortion will take place.
- Feather the mask:
- Press
MM(shortcut to open Mask Properties). - Increase the Feather of the mask (e.g., 30-50 pixels) for a smooth transition.
- Press
Step 5: Animate the Character "Phasing"
Create the illusion of the character passing into and out of the wall:
-
Opacity Animation:
- Select the character layer.
- Press
Tto open the Opacity settings. - Keyframe the character opacity to create a fade-out effect as they hit the wall:
- Before the wall: Opacity at 100%.
- Inside the wall: Slowly animate to 0% (invisible).
- After exiting the wall: Animate back to 100% to become fully visible.
-
Adjust the timing of the opacity animation to sync up with the character's motion.
Step 6: Add a Displacement Effect to the Wall
To make the wall ripple or distort as the character phases through:
- Select the wall layer.
- Go to
Effect → Distort → Displacement Map. - In Effect Controls:
- Set the Displacement Map Layer to your character layer.
- Adjust the Horizontal Displacement and Vertical Displacement values to create a subtle "ripple" effect.
- Keyframe the displacement parameters to fade in and out as the character moves through the wall.
Step 7: Add Glow or Energy Effects (Optional)
To enhance the effect, add glows or energy particles around the phase area:
- Duplicate the Character Layer:
- Select the character layer and duplicate it (
Ctrl + D).
- Select the character layer and duplicate it (
- Apply Glow or Tint:
- Go to
Effect → Stylize → Glow. - Adjust the glow radius and intensity to match the scene.
- Go to
- Mask or Feather the Glow:
- Use a mask to confine the glow effect to only appear when the character is in contact with the wall.
Step 8: Motion Blur and Refinement
- Enable Motion Blur:
- Click the Motion Blur icon on the layers in the timeline (it looks like three small circles).
- Make sure the "Enable Motion Blur" switch is active at the top of the timeline.
- Refine the mask and timing to match the motion of your character.
- Preview your scene:
- Use the
Spacebarto playback your animation. - Tweak animation curves in the Graph Editor for smoother transitions.
- Use the
Step 9: Export Your Final Composition
- Once you're satisfied with your effect, render the video:
- Go to
File → Export → Add to Render Queue. - Select your output format and folder.
- Hit
Render.
- Go to
Tips for Realism
- Use camera tracking if the wall and character footage involve moving perspectives.
- Place subtle sound effects (e.g., a "whoosh" sound or sparkling noises) to enhance the realism.
- Adjust lighting in your scene to match the environment as the character phases.
This final composition should look like a character seamlessly passing through a wall with subtle distortion, fade-out/in effects, and optional glowing energy for added impact.