Skip to content
The Chat Archive
o1-mini-2024-09-12· OpenAI WildChat-4.8M (AI2)

import logging import math from copy import deepcopy from typing import Dict, List,…

  1. User

    import logging import math from copy import deepcopy from typing import Dict, List, Optional import multiprocessing as mp # 使用别名以避免命名冲突 from functools import partial

    import numpy as np from qiskit import QuantumCircuit, QuantumRegister, transpile from qiskit.circuit.library import RYGate, QFT from qiskit.quantum_info import Operator from qiskit_aer import AerSimulator

    from qiskit_optimization.algorithms.optimization_algorithm import ( OptimizationResultStatus, )

    设置日志记录

    logging.basicConfig(level=logging.INFO) logger = logging.getLogger(name)

    class GroverOptimizationResult: def init(self, keys, values, operation_counts, n_input_qubits, n_output_qubits, threshold, num_solutions): self.keys = keys self.values = values self.operation_counts = operation_counts self.n_input_qubits = n_input_qubits self.n_output_qubits = n_output_qubits self.threshold = threshold self.num_solutions = num_solutions self.status = OptimizationResultStatus.SUCCESS # 生成一个解决方案列表,每个解决方案都是一个由 0 和 1 组成的列表,表示键的二进制形式 self.solutions = [[1 if i == key else 0 for i in range(num_solutions)] for key in keys]

    class GroverOptimizer: def init( self, num_value_qubits: int, num_key_qubits: int, num_ancil_qubits: int = 1, num_iterations: int = 5, sampler: Optional = None, # 移除类型注解以避免多进程pickle问题 ) -> None: self._num_ancil_qubits = num_ancil_qubits self._num_value_qubits = num_value_qubits self._num_key_qubits = num_key_qubits self._n_iterations = num_iterations self._circuit_results = {} # type: dict self._sampler = sampler self._MIN_PROBABILITY = 1e-15 # 调整最小概率以避免浮点误差

    def get_compatibility_msg(self, problem):
        return ""
    
    def _get_a_operator_gate(self, numbers, qr_key, qr_value, qr_ancil, oracle_bit):
        # 初始化量子电路,包括 oracle_bit
        a_operator = QuantumCircuit(qr_key, qr_value, qr_ancil, oracle_bit)
    
        # 将key和value寄存器的量子比特置于叠加态
        a_operator.h(qr_key)
        a_operator.h(qr_value)
    
        # 对辅助量子比特进行操作
        a_operator.rx(np.pi / 2, qr_ancil)
        a_operator.z(qr_ancil)
        a_operator.x(qr_ancil)
    
        # 对每个数字进行编码
        for idx, number in enumerate(numbers):
            applied_x = []
            # 对qr_key进行X门操作以对应正确的编号
            bin_index = format(idx, '0' + str(self._num_key_qubits) + 'b')[::-1]
            for i, bit in enumerate(bin_index):
                if bit == '0':
                    a_operator.x(qr_key[i])
                    applied_x.append(i)
    
            # 对每个qr_value的量子比特进行控制旋转门操作
            for i in range(self._num_value_qubits):
                # 计算旋转角度
                angle = 4 * np.pi * number / (2 ** self._num_value_qubits)
                # 创建控制旋转门RY
                ry_gate = RYGate(angle).control(len(qr_key) + 1)
                # 重复添加控制旋转门RY 2**i次
                for _ in range(2 ** i):
                    a_operator.append(ry_gate, qr_key[:] + [qr_value[i], qr_ancil[0]])
    
            # 重置已经添加过X门的qr_key量子比特
            for i in applied_x:
                a_operator.x(qr_key[i])
    
        # 对辅助量子比特进行操作
        a_operator.x(qr_ancil)
        a_operator.z(qr_ancil)
        a_operator.rx(-np.pi / 2, qr_ancil)
    
        # 将量子电路转换为 Gate 对象
        a_operator_gate = a_operator.to_gate(label="A")
        return a_operator_gate
    
    def _get_oracle_gate(self, qr_key, qr_value, qr_ancil, oracle_bit):
        # 定义矩阵
        custom_matrix = np.array([[-1, 0], [0, 1]])
        # 创建一个 Operator
        custom_gate = Operator(custom_matrix)
        oracle = QuantumCircuit(qr_key, qr_value, qr_ancil, oracle_bit)
        # 应用自定义门到 oracle_bit 上
        oracle.unitary(custom_gate, [self._num_key_qubits + self._num_value_qubits + self._num_ancil_qubits],
                       label='Oracle')
        # 将量子电路转换为 Gate 对象
        oracle_gate = oracle.to_gate(label="Oracle")
        return oracle_gate
    
    def _apply_threshold_rotation_gate(self, threshold_complement, numbers, qr_key, qr_value, qr_ancil, oracle_bit):
        # 初始化量子电路,包括 oracle_bit
        rotation_circuit = QuantumCircuit(qr_key, qr_value, qr_ancil, oracle_bit)
    
        # 对辅助量子比特进行操作
        rotation_circuit.rx(np.pi / 2, qr_ancil)
        rotation_circuit.z(qr_ancil)
        rotation_circuit.x(qr_ancil)
    
        # 对每个数字进行编码
        for idx, number in enumerate(numbers):
            applied_x = []
            # 对qr_key进行X门操作以对应正确的编号
            bin_index = format(idx, '0' + str(self._num_key_qubits) + 'b')[::-1]
            for i, bit in enumerate(bin_index):
                if bit == '0':
                    rotation_circuit.x(qr_key[i])
                    applied_x.append(i)
    
            # 对每个qr_value的量子比特进行控制旋转门操作
            for i in range(self._num_value_qubits):
                # 计算旋转角度
                angle = 4 * np.pi * threshold_complement / (2 ** self._num_value_qubits)
                # 创建控制旋转门RY
                ry_gate = RYGate(angle).control(len(qr_key) + 1)
                # 重复添加控制旋转门RY 2**i次
                for _ in range(2 ** i):
                    rotation_circuit.append(ry_gate, qr_key[:] + [qr_value[i], qr_ancil[0]])
    
            # 重置已经添加过X门的qr_key量子比特
            for i in applied_x:
                rotation_circuit.x(qr_key[i])
    
        # 对value寄存器应用逆量子傅里叶变换并对辅助量子比特进行操作
        rotation_circuit.append(QFT(self._num_value_qubits).inverse(), qr_value[:])
        rotation_circuit.x(qr_ancil)
        rotation_circuit.z(qr_ancil)
        rotation_circuit.rx(-np.pi / 2, qr_ancil)
    
        # 将量子电路转换为 Gate 对象
        rotation_gate = rotation_circuit.to_gate(label="ThresholdRotation")
        return rotation_gate
    
    def solve(self, numbers: List[int], N: int):
        # 初始化量子寄存器
        qr_key = QuantumRegister(self._num_key_qubits, 'key')
        qr_value = QuantumRegister(self._num_value_qubits, 'value')
        qr_ancil = QuantumRegister(self._num_ancil_qubits, 'ancil')
        oracle_bit = QuantumRegister(1, 'oracle')
    
        # 创建主量子电路
        main_circuit = QuantumCircuit(qr_key, qr_value, qr_ancil, oracle_bit)
    
        # 获取 Oracle 和 A Operator Gate
        oracle_gate = self._get_oracle_gate(qr_key, qr_value, qr_ancil, oracle_bit)
        a_operator_gate = self._get_a_operator_gate(numbers, qr_key, qr_value, qr_ancil, oracle_bit)
    
        # 预排序,获取初始最大的N个值和键
        n_largest_values_and_keys = sorted([(numbers[i], i) for i in range(len(numbers))], key=lambda x: x[0],
                                           reverse=True)[:N]
        n_largest_values = [item[0] for item in n_largest_values_and_keys]
        n_largest_keys = [item[1] for item in n_largest_values_and_keys]
    
        keys_measured = [item[1] for item in n_largest_values_and_keys]
    
        # 变量初始化
        optimum_found = False
        threshold = 0
        n_key = self._num_key_qubits
        n_value = self._num_value_qubits
    
        num_solutions = 2 ** n_key
    
        operation_count = {}
        iteration = 0
    
        rotations = 0
        max_rotations = int(math.ceil(100 * math.pi / 4))
    
        measurement = True
    
        # 初始化模拟器,利用多线程
        simulator = AerSimulator(max_parallel_threads=math.floor(mp.cpu_count() * 0.8))  # 使用80%的CPU核心
    
        # 将 A operator 添加到主电路
        main_circuit.append(a_operator_gate, qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
    
        while not optimum_found:
            m = 1
            improvement_found = False
    
            # 获取当前阈值的补码
            if threshold == 0:
                threshold_complement = 0
            else:
                threshold_complement = self._decimal_to_twos_complement(-threshold, self._num_value_qubits)
    
            # 应用阈值旋转 Gate
            rotation_gate = self._apply_threshold_rotation_gate(threshold_complement, numbers, qr_key, qr_value,
                                                                qr_ancil, oracle_bit)
            main_circuit.append(rotation_gate, qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
    
            # 迭代直到找到改进
            loops_with_no_improvement = 0
            while not improvement_found:
                loops_with_no_improvement += 1
                rotation_count = np.random.randint(0, m + 1)
                rotations += rotation_count
    
                # 构建Grover迭代电路
                grover_circuit = deepcopy(main_circuit)
                for _ in range(rotation_count):
                    grover_circuit.append(oracle_gate, qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
                    grover_circuit.append(a_operator_gate.inverse(),
                                          qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
                    grover_circuit.append(oracle_gate, qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
                    grover_circuit.append(a_operator_gate, qr_key[:] + qr_value[:] + [qr_ancil[0]] + oracle_bit[:])
    
                # 添加测量
                grover_circuit.measure_all()
    
                # 获取测量结果
                outcome = self._measure(grover_circuit, simulator)
    
                # 提取键和值
                k = int(outcome[2 + n_value: n_key + 2 + n_value], 2)
                v = outcome[2: 2 + n_value]
                int_v = GroverOptimizer._bin_to_int(v, n_value) + threshold
    
                logger.info("Outcome: %s", outcome)
                logger.info("Value Q(x): %s", int_v)
    
                # 检查是否满足条件
                if int_v in numbers and (len(n_largest_values) < N or int_v > n_largest_values[-1]):
                    if k not in keys_measured:
                        # 更新最大的N个值和对应的键
                        if len(n_largest_values) == N:
                            removed_value = n_largest_values.pop(-1)
                            removed_key = n_largest_keys.pop(-1)
                            logger.info(f"Removed Value: {removed_value}, Key: {removed_key}")
                        n_largest_values.append(int_v)
                        n_largest_keys.append(k)
                        keys_measured.append(k)
    
                        # 保持降序排列
                        sorted_pairs = sorted(zip(n_largest_values, n_largest_keys), reverse=True)
                        n_largest_values, n_largest_keys = zip(*sorted_pairs)
                        n_largest_values = list(n_largest_values)
                        n_largest_keys = list(n_largest_keys)
    
                        logger.info("Updated n_largest_values: %s", n_largest_values)
                        logger.info("Updated n_largest_keys: %s", n_largest_keys)
    
                        # 更新阈值
                        threshold = n_largest_values[-1]
                        improvement_found = True
                else:
                    # 增加m
                    m = int(math.ceil(min(m * 8 / 7, 2 ** (n_key / 2))))
                    logger.info("No Improvement. M: %s", m)
    
                    if k not in keys_measured:
                        keys_measured.append(k)
    
                    # 检查停止条件
                    if (
                            loops_with_no_improvement >= self._n_iterations
                            or len(keys_measured) == len(numbers)
                            or rotations >= max_rotations
                    ):
                        improvement_found = True
                        optimum_found = True
    
                # 记录操作计数
                operations = grover_circuit.count_ops()
                operation_count[iteration] = operations
                iteration += 1
                logger.info("Operation Count: %s\n", operations)
    
        # 构建结果对象
        result = GroverOptimizationResult(
            keys=n_largest_keys,
            values=n_largest_values,
            operation_counts=operation_count,
            n_input_qubits=n_key,
            n_output_qubits=n_value,
            threshold=threshold,
            num_solutions=len(numbers)
        )
        return result
    
    def _measure(self, circuit: QuantumCircuit, simulator: AerSimulator) -> str:
        """使用AerSimulator执行电路模拟,并获取测量结果。"""
        # 转译电路
        transpiled_circuit = transpile(circuit, simulator)
    
        # 运行模拟
        result = simulator.run(transpiled_circuit, shots=1).result()
        counts = result.get_counts()
    
        # 因为 shots=1,所以直接获取单一结果
        outcome = list(counts.keys())[0]
        return outcome
    
    @staticmethod
    def _bin_to_int(v: str, num_value_bits: int) -> int:
        """将一个使用二进制补码形式表示的字符串转换为一个整数。"""
        if v.startswith("1"):
            int_v = int(v, 2) - 2 ** num_value_bits
        else:
            int_v = int(v, 2)
        return int_v
    
    def _decimal_to_twos_complement(self, negative_decimal, num_bits):
        """将负整数转换为二进制补码表示的整数。"""
        mask = 2 ** num_bits - 1
        twos_complement = (abs(negative_decimal) ^ mask) + 1
        return twos_complement
    

    def simulate_measurement(circuit_serialized): """在子进程中反序列化电路并执行测量。""" simulator = AerSimulator() transpiled_circuit = transpile(circuit_serialized, simulator) result = simulator.run(transpiled_circuit, shots=1).result() counts = result.get_counts() outcome = list(counts.keys())[0] return outcome

    示例用法

    if name == "main": numbers = [55, 6, 83, 2, 94, 53, 28, 64, 75, 47, 93, 36, 23, 89, 84, 91, 76, 12, 40, 38, 86, 51, 25, 21, 72, 48, 31, 18, 62, 66, 77, 13, 82, 61, 92, 81, 35, 71, 74, 98, 22, 96, 44, 43, 5, 100, 45, 30, 65, 85]

    num_value_qubits = 7  # 根据最大数字调整
    num_key_qubits = 7  # 根据数字数量调整
    
    optimizer = GroverOptimizer(num_value_qubits=num_value_qubits, num_key_qubits=num_key_qubits)
    
    # 设置进程池,限制为4个进程
    pool = mp.Pool(processes=4)
    
    try:
        result = optimizer.solve(numbers, N=5)
        print("Keys:", result.keys)
        print("Values:", result.values)
    finally:
        pool.close()
        pool.join()
    

    代码出现报错Traceback (most recent call last): File "G:\Hellyc\Iris-简化QNN自适应经验回放-2\GAS\minitest.py", line 361, in result = optimizer.solve(numbers, N=5) File "G:\Hellyc\Iris-简化QNN自适应经验回放-2\GAS\minitest.py", line 214, in solve rotation_gate = self._apply_threshold_rotation_gate(threshold_complement, numbers, qr_key, qr_value, File "G:\Hellyc\Iris-简化QNN自适应经验回放-2\GAS\minitest.py", line 156, in _apply_threshold_rotation_gate rotation_gate = rotation_circuit.to_gate(label="ThresholdRotation") File "G:\anaconda3\envs\pennylane2\lib\site-packages\qiskit\circuit\quantumcircuit.py", line 1618, in to_gate return circuit_to_gate(self, parameter_map, label=label) File "G:\anaconda3\envs\pennylane2\lib\site-packages\qiskit\converters\circuit_to_gate.py", line 64, in circuit_to_gate raise QiskitError( qiskit.exceptions.QiskitError: 'One or more instructions cannot be converted to a gate. "IQFT" is not a gate instruction' 如何进行解决

  2. Assistant

    The error you're encountering:

    qiskit.exceptions.QiskitError: 'One or more instructions cannot be converted to a gate. "IQFT" is not a gate instruction'
    

    occurs because the to_gate method in Qiskit attempts to convert the entire QuantumCircuit into a single Gate object. However, certain composite operations like the Inverse Quantum Fourier Transform (IQFT) are not single-gate operations and thus cannot be directly converted into a single gate.

    To resolve this issue, you need to decompose the circuit into its constituent basic gates before converting it into a Gate object. Decomposing ensures that all composite operations are broken down into elementary gates that Qiskit can handle individually.

    Here's how you can modify your code to address this issue:

    1. Transpile the Circuit Before Conversion

      Use Qiskit's transpile function to decompose the circuit into basic gates. This step ensures that all composite operations like IQFT are broken down into their fundamental gate components.

    2. Specify Basis Gates (Optional but Recommended)

      While transpiling, you can specify a set of basis gates to which the circuit should be decomposed. This not only ensures compatibility but can also optimize the circuit for performance.

    3. Modify the _apply_threshold_rotation_gate Method

      Incorporate the transpilation step in the _apply_threshold_rotation_gate method before converting the circuit to a gate.

    Updated Code Snippet

    Here's the modified portion of your code with the necessary changes:

    from qiskit import Aer, transpile  # Ensure you have imported transpile
    
    class GroverOptimizer:
        # ... [rest of your class]
    
        def _apply_threshold_rotation_gate(self, threshold_complement, numbers, qr_key, qr_value, qr_ancil, oracle_bit):
            # Initialize quantum circuit including oracle_bit
            rotation_circuit = QuantumCircuit(qr_key, qr_value, qr_ancil, oracle_bit)
    
            # Perform operations on the ancillary qubit
            rotation_circuit.rx(np.pi / 2, qr_ancil)
            rotation_circuit.z(qr_ancil)
            rotation_circuit.x(qr_ancil)
    
            # Encode each number
            for idx, number in enumerate(numbers):
                applied_x = []
                # Apply X gates to qr_key to set the correct index
                bin_index = format(idx, '0' + str(self._num_key_qubits) + 'b')[::-1]
                for i, bit in enumerate(bin_index):
                    if bit == '0':
                        rotation_circuit.x(qr_key[i])
                        applied_x.append(i)
    
                # Apply controlled RY gates to qr_value
                for i in range(self._num_value_qubits):
                    angle = 4 * np.pi * threshold_complement / (2 ** self._num_value_qubits)
                    ry_gate = RYGate(angle).control(len(qr_key) + 1)
                    for _ in range(2 ** i):
                        rotation_circuit.append(ry_gate, qr_key[:] + [qr_value[i], qr_ancil[0]])
    
                # Reset X gates on qr_key
                for i in applied_x:
                    rotation_circuit.x(qr_key[i])
    
            # Apply inverse QFT and additional operations
            rotation_circuit.append(QFT(self._num_value_qubits).inverse(), qr_value[:])
            rotation_circuit.x(qr_ancil)
            rotation_circuit.z(qr_ancil)
            rotation_circuit.rx(-np.pi / 2, qr_ancil)
    
            # Decompose the circuit into basic gates
            basis_gates = ['u1', 'u2', 'u3', 'cx', 'id']  # Define the basis gates
            rotation_circuit = transpile(rotation_circuit, basis_gates=basis_gates, optimization_level=3)
    
            # Convert the decomposed circuit to a gate
            rotation_gate = rotation_circuit.to_gate(label="ThresholdRotation")
            return rotation_gate
    
        # ... [rest of your class]
    

    Explanation of Changes

    1. Import transpile: Ensure that the transpile function is imported from Qiskit.

    2. Define Basis Gates: A list of basic gates (basis_gates) is defined. These are the minimal set of gates that Qiskit can use to represent any quantum operation after decomposition.

    3. Transpile the Circuit: Before converting the rotation_circuit to a gate, transpile it using the specified basis_gates. The optimization_level can be set from 0 (no optimization) to 3 (highest level of optimization). Level 3 often provides a good balance between performance and transpilation time.

    4. Convert to Gate: After transpiling, the circuit consists solely of basic gates, making it compatible with the to_gate method.

    Additional Recommendations

    • Transpile Once: If you have multiple circuits using similar gates, consider transpiling them once and reusing the transpiled versions to save computational resources.

    • Check Gate Compatibility: Ensure that all custom gates or composite operations in your circuits are either decomposed or defined in a way that Qiskit can handle them when converting to Gate objects.

    • Debugging: To further debug similar issues, you can inspect the gates present in your QuantumCircuit before attempting to convert it to a gate:

      print(rotation_circuit.draw())
      

      This helps identify any composite gates that might not be directly convertible.

    Final Thoughts

    By ensuring that all composite operations within your quantum circuits are decomposed into basic gates before attempting to convert the entire circuit into a gate, you can avoid the QiskitError related to unconvertible instructions like IQFT. This approach not only resolves the immediate error but also aligns with best practices for modular and maintainable quantum circuit design.