Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

Login to 0136-ict-prxm×50114 Just connecting Session Xorg username nvidia password ОК…

  1. User

    Login to 0136-ict-prxm×50114 Just connecting Session Xorg username nvidia password ОК Cancel

    Connection Log connecting to sesman ip 127.0.0.1 port 3350 sesman connect ok sending login info to session manager, please wait... login failed for display o OK

    Last login: Thu Nov 7 23:21:28 2024 from 76.103.135.209 nvidia@0136-ict-prxmx50114:~$ sudo tail -f /var/log/xrdp-sesman.log [20241108-12:27:24] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 42118 [20241108-12:27:26] [ERROR] pam_authenticate failed: Authentication failure [20241108-12:27:26] [INFO ] Username or password error for user: nvidia [20241108-12:27:26] [ERROR] sesman_data_in: scp_process_msg failed [20241108-12:27:26] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans [20241108-12:27:44] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 50202 [20241108-12:27:45] [ERROR] pam_authenticate failed: Authentication failure [20241108-12:27:45] [INFO ] Username or password error for user: nvidia [20241108-12:27:45] [ERROR] sesman_data_in: scp_process_msg failed [20241108-12:27:45] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans

  2. Assistant

    It appears that you're experiencing an authentication failure when attempting to log in to your system via xrdp using the username nvidia. The error messages suggest that the PAM (Pluggable Authentication Modules) authentication is failing for this user. Let's work through some steps to troubleshoot and resolve this issue.

    1. Verify Username and Password

    • Ensure Correct Credentials: Double-check that you're entering the correct username and password. Remember that both are case-sensitive.
    • Test Local Login: Try logging in directly on the machine (e.g., via SSH) with the same credentials to confirm that the account is functioning properly.

    2. Check User Account Status

    • Account Lockout: Verify that the nvidia account is not locked or expired.
      sudo passwd -S nvidia
      
      • The output should show "Password set, user can change password, account is active."
    • Unlock Account (if necessary):
      sudo passwd -u nvidia
      

    3. Review PAM Configuration for xrdp-sesman

    • PAM Config File: Inspect the PAM configuration file for xrdp-sesman, typically located at /etc/pam.d/xrdp-sesman.
    • Default Configuration: Ensure it contains the appropriate modules for authentication. A typical configuration might look like:
      auth       required     pam_unix.so
      account    required     pam_unix.so
      session    required     pam_unix.so
      password   required     pam_unix.so
      
    • Compare with System Defaults: You can compare it with other PAM config files (e.g., /etc/pam.d/login) to ensure consistency.

    4. Check xrdp-sesman Permissions and Ownership

    • Verify File Permissions:
      sudo ls -l /etc/xrdp/sesman.ini
      
      • Ensure that the file is readable by the xrdp user or appropriate service account.
    • Correct Permissions (if necessary):
      sudo chown root:xrdp /etc/xrdp/sesman.ini
      sudo chmod 640 /etc/xrdp/sesman.ini
      

    5. Review sesman.ini Configuration

    • Security Settings: Open /etc/xrdp/sesman.ini and check under the [Security] section.
      • Allow Groups: Ensure that if AlwaysGroupCheck is set to true, the nvidia user is part of the allowed groups.
        AlwaysGroupCheck=true
        AllowGroups=remote_desktop_users
        
      • Modify Groups (if necessary):
        sudo usermod -aG remote_desktop_users nvidia
        
    • Restricting Access: If DenyGroups or DenyUsers are specified, make sure the nvidia user is not listed there.

    6. Examine System Authentication Logs

    • Authentication Logs: Check system logs for additional authentication errors.
      • Debian/Ubuntu:
        sudo tail -f /var/log/auth.log
        
      • RHEL/CentOS:
        sudo tail -f /var/log/secure
        
      • Look for entries related to pam_unix, xrdp-sesman, or nvidia.

    7. Verify SSH Key Permissions (if using SSH keys)

    • SSH Authentication: If you're using SSH keys for authentication, ensure that the .ssh directory and its contents have the correct permissions.
      ls -ld ~/.ssh
      ls -l ~/.ssh
      
      • Permissions:
        • .ssh directory: 700
        • authorized_keys: 600
      • Correct Permissions (if necessary):
        chmod 700 ~/.ssh
        chmod 600 ~/.ssh/authorized_keys
        

    8. Check SELinux or AppArmor Policies

    • SELinux:
      • Status:
        sudo getenforce
        
        • If it's Enforcing, SELinux might block xrdp.
      • Set to Permissive (for testing purposes):
        sudo setenforce 0
        
      • Permanent Change (if necessary, not recommended for production without proper analysis): Edit /etc/selinux/config and set SELINUX=permissive.
    • AppArmor:
      • Disable AppArmor Profile (for xrdp, if necessary):
        sudo aa-complain /etc/apparmor.d/usr.bin.xrdp
        

    9. Restart xrdp Services

    • Restart Services: Sometimes, services need to be restarted to apply changes.
      sudo systemctl restart xrdp
      sudo systemctl restart xrdp-sesman
      

    10. Update xrdp and Related Packages

    • System Update:
      sudo apt update && sudo apt upgrade
      
    • Reinstall xrdp (if necessary):
      sudo apt install --reinstall xrdp
      

    11. Enable Debug Logging for xrdp-sesman

    • Increase Log Verbosity:
      • Edit /etc/xrdp/sesman.ini and set LogLevel=DEBUG under the [Logging] section.
      • Restart xrdp services:
        sudo systemctl restart xrdp-sesman
        
      • Analyze Logs: Check /var/log/xrdp-sesman.log for detailed error messages.

    12. Verify xrdp and Xorg Integration

    • Ensure Xorg is Installed:
      sudo apt install xorgxrdp xserver-xorg-core
      
    • Session Configuration:
      • Check /etc/xrdp/startwm.sh to ensure it correctly starts the desired window manager or desktop environment.
      • A typical startwm.sh might include:
        #!/bin/sh
        if [ -r /etc/default/locale ]; then
            . /etc/default/locale
            export LANG LANGUAGE
        fi
        startxfce4
        

    13. Test with a Different User Account

    • Create a Test User:
      sudo adduser testuser
      
    • Attempt Login: Try logging in via xrdp with the testuser account to see if the issue is specific to the nvidia user.

    14. Firewall and Port Configuration

    • Check Firewall Settings:
      sudo ufw status
      
    • Allow xrdp Ports (if necessary):
      sudo ufw allow 3389/tcp
      

    15. Consult Documentation and Community Resources


    Note: Always be cautious when modifying system configurations. It's advisable to back up configuration files before making changes. If you're in a production environment, consider scheduling downtime or performing these actions during maintenance windows.

    If after all these steps the issue persists, there might be a deeper system-level problem. In that case, providing detailed logs and configurations to a system administrator or seeking professional support might be the best course of action.