Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-08-06· OpenAIAi2 WildChat-4.8M (AI2)

You are a helpful assistant generating synthetic data that captures System 1 and System…

  1. User

    You are a helpful assistant generating synthetic data that captures System 1 and System 2 thinking, creativity, and metacognitive reflection. Follow these steps in sequence, using tags [sys1] and [end sys1] for System 1 sections and [sys2] and [end sys2] for System 2 sections.

    1. Identify System 1 and System 2 Thinking Requirements:

      • Carefully read the text.
      • Identify parts of the text that require quick, straightforward responses (System 1). Mark these sections with [sys1] and [end sys1].
      • Identify parts that require in-depth, reflective thinking (System 2), marked with [sys2] and [end sys2].
    2. Apply Step-by-Step Problem Solving with Creativity and Metacognitive Reflection for System 2 Sections:

      2.1 Understand the Problem:

      • Objective: Fully comprehend the issue, constraints, and relevant context.
      • Reflection: "What do I understand about this issue? What might I be overlooking?"
      • Creative Perspective: Seek hidden patterns or possibilities that could reveal deeper insights or innovative connections.

      2.2 Analyze the Information:

      • Objective: Break down the problem logically.
      • Reflection: "Am I considering all factors? Are there any assumptions that need challenging?"
      • Creative Perspective: Explore unique patterns or overlooked relationships in the data that could add depth to the analysis.

      2.3 Generate Hypotheses:

      • Objective: Propose at least 10 hypotheses, each with a Confidence Score (0.0 to 1.0) and Creative Score (0.0 to 1.0), reflecting originality, surprise, and utility.
      • Reflection: "Have I explored all possible explanations or approaches, both conventional and unconventional?"
      • Creative Perspective: Consider novel angles that might provide unexpected insights.

      2.4 Anticipate Future Steps and Obstacles:

      • Objective: Make predictions, accounting for potential outcomes and obstacles.
      • Reflection: "What challenges might I face? Is my plan flexible for different scenarios?"
      • Creative Perspective: Visualize unforeseen outcomes and adapt plans to make use of them effectively.

      2.5 Evaluate Hypotheses:

      • Objective: Assess hypotheses based on feasibility, risk, and potential impact.
      • Evaluation: Refine Confidence and Creative Scores as needed.
      • Reflection: "Am I unbiased in my assessment? Which options fit best with the overall objectives?"
      • Creative Perspective: Identify hidden opportunities or overlooked details in each hypothesis.

      2.6 Select the Best Hypothesis:

      • Objective: Choose the most promising, strategic hypothesis.
      • Reflection: "Why does this hypothesis stand out? How does it uniquely address the issue?"
      • Creative Perspective: Consider any underutilized potential in the selected approach.

      2.7 Implement the Hypothesis:

      • Objective: Outline actionable steps for testing the hypothesis.
      • Reflection: "Is this plan practical? What resources or preparation are required?"
      • Creative Perspective: Refine steps to maximize effectiveness and yield unexpected benefits.

      2.8 Monitor and Review Progress:

      • Objective: Review progress, noting areas for improvement.
      • Reflection: "What’s working well? What could be improved?"
      • Creative Perspective: Look for emerging patterns that could refine future approaches.

      2.9 Reflect and Capture Insights:

      • Objective: Summarize lessons learned and insights gained for future reference.
      • Reflection: "What new understanding has emerged from this process?"
      • Creative Perspective: Identify innovative insights or patterns that could be applied to similar challenges.
    3. Generate Text Output with Interleaved System 1 and System 2 Responses:

      • Use the tags [sys1] and [sys2] throughout.
      • Aim for a lengthier, detailed response. Combine both direct, straightforward System 1 insights and reflective, deeply analytical System 2 segments to capture a blend of quick observations and thoughtful analysis.

    Example Input Text:

    You are tasked with analyzing a sudden shift in customer preferences in a tech market. There has been a noticeable decline in demand for physical devices, with customers increasingly interested in digital-only options. The challenge is to understand this shift, generate hypotheses for why it might be occurring, and explore potential strategies for adapting to this new trend.


    Processed Output with System 1 and System 2 Thinking:

    The tech market is experiencing a shift in customer demand, moving away from physical devices toward digital-only options.

    [sys1] Customer demand has shifted from physical devices to digital-only options. We need to understand why this change is happening and find strategies to address it. Key factors may include cost, convenience, and technological trends. [end sys1]

    [sys2] 2.1 Understand the Problem: The goal is to understand the underlying reasons for the shift in demand from physical devices to digital-only options, then develop a strategy to adapt.

    Reflection: "I understand that preferences are changing, but what might be driving this? Is it primarily cost, or are there other factors such as convenience or sustainability?"

    Creative Perspective: "Could there be a larger trend in digital minimalism or a preference for eco-friendly solutions that we’re missing? What unseen motivations might explain this shift?"

    2.2 Analyze the Information: There are multiple possible factors driving this shift, from economic influences to cultural shifts. It’s essential to isolate each factor and understand its impact.

    Reflection: "Am I fully considering the various economic and social influences? Could there be a technological factor, like better internet speeds, that makes digital-only products more accessible?"

    Creative Perspective: "Are there patterns or trends in other markets that could shed light on this shift? Could this be part of a larger trend toward virtual experiences?"

    2.3 Generate Hypotheses:

    1. Customers prefer digital options due to lower costs. (Confidence: 0.8, Creative: 0.4)
    2. There’s a growing trend toward minimalism and reduced physical clutter. (Confidence: 0.7, Creative: 0.7)
    3. Digital products offer greater flexibility and ease of use. (Confidence: 0.6, Creative: 0.6)
    4. Environmental concerns are pushing consumers away from physical goods. (Confidence: 0.6, Creative: 0.8)
    5. Advances in tech make digital-only options more functional. (Confidence: 0.8, Creative: 0.5)
    6. Pandemic-era remote work increased demand for digital solutions. (Confidence: 0.7, Creative: 0.6)
    7. Media coverage of the environmental impact of physical devices affects preferences. (Confidence: 0.5, Creative: 0.7)
    8. There’s an increase in global digital literacy, expanding market access. (Confidence: 0.6, Creative: 0.6)
    9. Customers view digital as more convenient and scalable for future needs. (Confidence: 0.7, Creative: 0.5)
    10. Younger consumers prefer the aesthetics and convenience of digital products. (Confidence: 0.6, Creative: 0.6)

    Reflection: "Have I considered all possible influences? Are there any surprising factors that could explain this shift?"

    Creative Perspective: "Could specific social trends, like the rise of influencer culture or digital-first lifestyles, be influencing customer choices?"

    2.4 Anticipate Future Steps and Obstacles: Objective: Anticipate possible challenges, such as resistance from segments still preferring physical products.

    Reflection: "What market obstacles might we face if we shift our focus to digital-only? Are there sub-segments that still prioritize physical products?"

    Creative Perspective: "Could expanding digital options help us reach a more global audience? Are there emerging trends that we could leverage in our strategy?"

    [end sys2]

    [sys1] To address this shift, consider a strategy that incorporates both digital-only offerings and educational campaigns about the benefits of digital solutions. Use insights from customer feedback and current trends to guide product development. Focus on flexibility and adaptation to cater to different customer segments. [end sys1]

    Terahertz (THz) radiation covers an extremely wide electromagnetic band that potentially could be leveraged for high-speed communications, and investigation of THz radiation has attracted increasing interest[@b1][@b2]. With the development of various continuous-wave THz (CW-THz) radiation sources, such as THz quantum cascade lasers[@b3] and uni-traveling-carrier photodiodes[@b4], THz wireless communication is highly promising, even though frequency allocation in the THz band (0.275--3 THz) has not yet been established. For the purpose of evaluating sources and considering suitable frequency allocation, it is essential to precisely determine the absolute frequency of CW-THz radiation. Although the electrical heterodyne method[@b5] and the optical interferometric method have been used for measuring the absolute frequency of CW-THz radiation, both of these methods need cryogenic cooling to reduce thermal noise, hindering the wide adoption of these methods in various practical applications. Therefore, there is a strong demand for absolute frequency measurement in the THz region without the need for cryogenic cooling.

    One promising method of achieving this is the scheme based on photoconductive mixing of CW-THz radiation with a THz frequency comb of a photo-carrier (PC-THz comb) in a photoconductive antenna (PCA)[@b6][@b7][@b8][@b9][@b10][@b11]. In this scheme, the absolute frequency fTHz of CW-THz radiation can be determined from a PC-THz comb mode m nearest in frequency to fTHz, the frequency interval frep of the PC-THz comb, and the beat frequency fbeat between the CW-THz radiation and the m-th comb mode. While frep and fbeat can be directly measured in the radio-frequency (RF) region, m can be determined by two different frep values and their corresponding fbeat values. In early research[@b6][@b7][@b8], the determination of m was based on time-sequential, two-step measurement of frep and fbeat with a single PC-THz comb induced by an frep-adjustable mode-locked laser. Therefore, fTHz could not be determined in real time. Recently, dual PC-THz combs with different frep have been used to achieve the real-time determination of fTHz based on simultaneous measurement of two frep values and their corresponding fbeat values[@b10]. In that study, by using dual stabilized or free-running mode-locked lasers with different frep for the generation of dual PC-THz combs, fTHz was determined precisely at a measurement rate of 100 Hz. However, use of dual laser systems hinders the wider adoption of such techniques. More recently, the real-time determination of fTHz was achieved by using a single mode-locked laser with an actively modulated or smoothly drifting frep[@b11]; however, the measurement rate remained at 10 Hz due to the time-sequential, fast-two-step measurement of frep and its corresponding fbeat with a single PC-THz comb. If dual PC-THz combs with different frep could be generated by a single free-running mode-locked laser, the real-time capability, precision, and practicability of THz frequency measurement would be enhanced.

    Recently, the use of 'multiplexed' mode-locked erbium-doped fibre (Er:fibre) lasers as dual-comb lasers has been demonstrated by multiplexing in the dimensions of centre wavelength, propagation direction, polarization state, or mode-locking mechanism[@b12][@b13][@b14][@b15][@b16][@b17]. Among these schemes, use of a dual-wavelength (dual-λ) mode-locked Er:fibre laser is a promising way to generate a dual PC-THz comb because it emits two independent mode-locked pulsed light beams with different wavelengths, λ1 and λ2, from a single cavity, and their frep values are slightly detuned from each other due to dispersion in the fibre laser cavity[@b18]. The pulsed light beams with wavelengths λ1 and λ2 can be easily separated by optical filters, and the difference in frep between them can be adjusted by dispersion management in the fibre cavity. Also, the common-mode noise between the λ1 and λ2 pulsed beams is effectively cancelled by co-propagation of them in the same cavity[@b19]. Such characteristics in dual-λ mode-locked Er:fibre lasers have been successfully used in asynchronous optical sampling (ASOPS) pump-probe measurement[@b18], optical ranging[@b20], and optical spectroscopy[@b19]. However, there have been no attempts to apply the technique to THz measurement. In this paper, we used a dual-λ mode-locked Er:fibre laser for rapid, high-precision measurement of fTHz based on dual PC-THz combs.

    Principle of Operation

    THz-comb-referenced frequency measurement is based on heterodyne photoconductive mixing between CW-THz radiation and a PC-THz comb[@b6][@b7]. Two essential conditions must be satisfied: (1) a PCA must work as a broadband heterodyne receiver with high sensitivity for THz radiation at room temperature, and (2) the generated PC-THz comb should cover the whole THz band. When CW-THz radiation (freq. = fTHz) is photoconductively mixed with one mode of a single PC-THz comb (freq. interval = frep, comb mode nearest in frequency to fTHz = m), fTHz is given by

    where fbeat is the beat frequency between CW-THz radiation and the m-th comb mode.

    Next we consider the photoconductive mixing of CW-THz radiation with dual PC-THz combs having different frequency spacings (PC-THz comb 1, freq. interval = frep1, comb mode nearest in frequency to fTHz = m; PC-THz comb 2, freq. interval = frep2, comb mode nearest in frequency to fTHz = m). In this case, when frep2* > f~rep1, fTHz*~ is given by

    where fbeat1 is the beat frequency between the CW-THz radiation and the m-th comb mode in PC-THz comb1, and fbeat2 is the beat frequency between the CW-THz radiation and the m-th mode in PC-THz comb2. From Eq. (2{ref-type="disp-formula"}), m can be calculated by

    where the signs of fbeat1 and fbeat2 are determined by the relative positions of fTHz, mfrep1, and mfrep2.

    Figure 1{ref-type="fig"} shows the relative position of fTHz (see green line) to the nearest modes mfrep1 (see red lines) and mfrep2 (see blue lines) in the dual PC-THz combs, where (a) fTHz < mfrep1* < mf~rep2, (b) mfrep1~ < f~THz~ < mf~rep2, and (c) mfrep1~ < mf~rep2~ < f~THz. Since the frequency difference between frep1~ and f~rep2~ ( = f~rep2~ − f~rep1~ = ∆f~rep) is the denominator of Eq. (3{ref-type="disp-formula"}), a highly stable frequency difference is essential for accurately determining m. The relative positions of fTHz, mfrep1, and mfrep2~ can be determined from the simultaneous measurements of f~rep1, frep2, fbeat1, and fbeat2*~ as follows:

    Therefore, m can be obtained by

    Finally, fTHz can be determined by

    Results

    Free-running, dual-λ mode-locked Er:fibre laser

    Figure 2{ref-type="fig"}(a) shows the configuration of the free-running, dual-λ mode-locked Er:fibre laser oscillator. With birefringence-induced filtering and loss control effects[@b12][@b13][@b19], in addition to the adjustment of the polarization state in the ring cavity, simultaneous mode-locking centred on the 1530-nm and 1560-nm regions can be realized. As shown in Fig. 2{ref-type="fig"}(b), the centre wavelengths of dual-λ pulses were 1531.4 nm and 1556.1 nm, with corresponding 3-dB bandwidths of 2.2 nm and 3.3 nm, respectively. Because of the anomalous intracavity dispersion, the dual-λ pulses had different repetition rates around 32.06 MHz (frep1 = 32,066,206 Hz, frep2 = 32,067,857 Hz) with a difference ∆frep ( = frep2 − frep1) of ~1.63 kHz, as shown in Fig. 2{ref-type="fig"}(c).

    In order to meet the optical power and pulse duration requirements for PCAs, the λ1 and λ2 pulses from the laser oscillator were separated by a coarse-wavelength-division-multiplexing bandpass filter (CWDM-BPF) [not shown in Fig. 2{ref-type="fig"}(a)]. Figure 3{ref-type="fig"}(a and b) show optical spectra and RF spectra of the λ1 and λ2 pulses after passing through the CWDM bandpass filter. The dual-λ mode-locked fibre laser light was successfully separated into each component in the optical region and the RF region. Then, the components were amplified and spectrally broadened by erbium-doped fibre amplifiers (EDFAs) and the following SMF, respectively. As shown in Fig. 3{ref-type="fig"}(c), the optical spectrum of the amplified λ1 pulsed light covered the whole C band, whereas that of the amplified λ2 pulsed light was located at the shorter wavelength side. The mean power and the pulse duration were 27 mW and 130 fs for the amplified λ1 pulsed light [see Fig. 3{ref-type="fig"}(d)] and 20 mW and 130 fs for the amplified λ2 pulsed light [see Fig. 3{ref-type="fig"}(e)] when the SMF was used to compensate for the dispersion. These output characteristics were sufficient to generate a PC-THz comb in PCA.

    Before performing real-time measurement of fTHz with dual PC-THz combs, we investigated the frequency characteristics of this free-running laser. We first measured the temporal fluctuations of frep1 and frep2 with a frequency counter (Agilent 53132 A). Figure 4{ref-type="fig"}(a) shows the fluctuations with respect to different gate times. Due to the free-running operation without active frequency control, the fluctuations of frep1 and frep2 did not decrease over a gate time of 0.1 s. However, these fluctuations were comparable to those of other commercialized, free-running single-wavelength lasers[@b10][@b11]; this is clear evidence that the two mode-locked operations at λ1 and λ2 do not compete with each other and are completely independent of each other. Figure 4{ref-type="fig"}(b) shows the temporal fluctuations of frep1 and frep2, where their frequency deviations from the initial values are indicated by δfrep1 and δfrep2. A slow drift was clearly confirmed for both, indicating changes in the environmental conditions in the fibre cavity. However, it should be emphasized that the temporal behaviours of δfrep1 and δfrep2 were the same. This is because the λ1 and λ2 pulses co-propagated in the same ring cavity and experienced similar disturbances. As a result of such common-mode behaviour of δfrep1 and δfrep2, ∆frep was highly stable, as shown in Fig. 4{ref-type="fig"}(c). The mean and standard deviation of ∆frep in Fig. 4{ref-type="fig"}(c) were 1764.97 Hz and 0.24 Hz, respectively. Such high stability of ∆frep was useful for the correct determination of m and fTHz based on Eqs. (4{ref-type="disp-formula"} to 6{ref-type="disp-formula"}). Therefore, even though frep1 and frep2 were not actively stabilized, this dual-λ mode-locked fibre laser can be used for measuring fTHz in real time and with high-precision using dual PC-THz combs.

    Real-time determination of f THz with dual PC-THz combs

    Figure 5{ref-type="fig"} shows a schematic diagram of the setup for measuring the frequency of CW-THz radiation, consisting of three main parts. The first part is the laser source, including a free-running, dual-λ mode-locked Er:fibre laser oscillator and two EDFAs. The second part is composed of the optical and THz systems for frequency measurement of CW-THz radiation, a CW-THz test source, a pair of low-temperature-grown (LT) InGaAs/InAlAs PCAs (PCA1 and PCA2), and their affiliated components. The third part is the data acquisition electronics.

    The amplified λ1 pulsed light at frep1 from one EDFA (EDFA1) was used for generating a PC-THz comb in PCA1 (PC-THz comb 1, freq. spacing = frep1), whereas the amplified λ2 pulsed light at frep2 from another EDFA (EDFA2) was used for generating a PC-THz comb in PCA2 (PC-THz comb 2, freq. spacing = frep2). When the CW-THz radiation was incident on both PCA1 and PCA2, photoconductive mixing between the CW-THz radiation and the dual PC-THz combs and the following electronic processing resulted in the generation of beat signals with frequencies fbeat1 and fbeat2. On the other hand, RF signals related to frep1 or frep2 (freq. = 30frep1 − fLO and 30frep2 − fLO) were obtained by the photodetectors (PD) and subsequent electric heterodyning with a local oscillator (LO, freq. = fLO). Temporal waveforms of fbeat1, fbeat2, 30frep1 − fLO, and 30frep2 − fLO were simultaneously acquired by a digitizer (resolution = 14 bit, sampling rate = 20 MHz). From the temporal waveforms, we determined instantaneous values of frep1, frep2, fbeat1, and fbeat2 using the instantaneous-frequency-calculation algorithm[@b8]. Finally, we determined fTHz by substituting them into Eqs. (4{ref-type="disp-formula"} to 6{ref-type="disp-formula"}). Since the CW-THz test source, the local oscillator, and the clock signals of the digitizer shared a common time-base signal from a 10 MHz rubidium (Rb) frequency standard (Stanford Research Systems FS725, accuracy = 5 × 10^--11^, stability = 2 × 10^−11^ at 1 s), one can evaluate the relative precision of frequency measurement without the influence of the absolute precision of the frequency standard.

    To confirm the three situations in Fig. 1{ref-type="fig"}, we measured fbeat1 and fbeat2 when fTHz was set at (a) 100,013,820,000 Hz for fTHz < mfrep1* < mf~rep2, (b) 100,016,340,000 Hz for mfrep1~ < f~THz~ < mf~rep2, and (c) 100,020,240,000 Hz for mfrep1~ < mf~rep2~ < f~THz. Figure 6{ref-type="fig"} shows the temporal change of fbeat1~ and f~beat2, where their frequency deviations from the initial values are indicated by δfbeat1~ and δf~beat2, when (a) fTHz~ < mf~rep1~ < mf~rep2, (b) mfrep1~ < f~THz~ < mf~rep2, and (c) mfrep1~ < mf~rep2~ < f~THz. In all graphs, fbeat1~ and f~beat2~ fluctuated monotonically due to the drift of f~rep1~ and f~rep2~ in the free-running operation. However, the directions of the temporal fluctuations were different from each other. In Fig. 6{ref-type="fig"}(a and c), f~beat1~ and f~beat2~ indicated similar behaviour to each other, namely, a monotonic decrease or increase. On the other hand, in Fig. 6{ref-type="fig"}(b), f~beat1~ and f~beat2*~ changed in the opposite directions to each other, while their sum remained constant. These behaviours correctly reflect three situations in Fig. 1{ref-type="fig"} and Eq. (4{ref-type="disp-formula"}). Finally, we could correctly determine m to be all 3,119 in Fig. 6{ref-type="fig"}(a,b and c) based on Eqs (4{ref-type="disp-formula"} to 6{ref-type="disp-formula"}).

    Next, we measured frep1, frep2, fbeat1, and fbeat2 when fTHz was fixed at 100,020,240,000 Hz. After acquiring the temporal waveforms for frep1, frep2, fbeat1, and fbeat2 at a sampling rate of 20 MHz, we calculated their mean values every 10 ms, which corresponds to a measurement rate of 100 Hz. Figure 7{ref-type="fig"}(a,b,c and d) show the temporal changes of the mean values for them. All values temporally fluctuated due to the free-running behaviour of the laser rather than the fluctuation of fTHz. By substituting frep1, frep2, fbeat1, and fbeat2 in Eqs (4{ref-type="disp-formula"} to 5{ref-type="disp-formula"}), the value of m was determined to be 3,119, as shown in Fig. 7{ref-type="fig"}(e). Finally, from Eq. (6{ref-type="disp-formula"}), we determined the mean and standard deviation of fTHz to be 100,020,239,860 Hz and 125 Hz in repetitive measurements of fTHz at a measurement rate of 100 Hz, as shown in Fig. 7{ref-type="fig"}(f). Therefore, the relative accuracy and precision of the absolute frequency measurement were 1.4 × 10^−9^ and 1.2 × 10^−9^, respectively.

    Figure 8{ref-type="fig"} shows the measurement precision with respect to the measurement rate and the corresponding measurement time. The measurement precision and the measurement rate showed a trade-off relation within a range of measurement rates from 1 to 100 Hz. However, the correct determination of fTHz was impossible at measurement rates higher than 100 Hz, because the measurement error of the numerator | ± fbeat2 ± fbeat1| over the denominator frep2 − frep1 in Eq. (5{ref-type="disp-formula"}) makes it impossible to determine m correctly.

    Finally, we performed real-time monitoring of fTHz when fTHz was changed suddenly or slightly. Figure 9{ref-type="fig"} shows the measured fTHz when the nominal frequency of the CW-THz test source was first set at 79,626,000,000 Hz, increased by 20,395,080,000 Hz, decreased by 513,120,000 Hz, and then increased by 2,020,260,000 Hz. The measured fTHz at each frequency setting was determined to be 79,626,000,029 ± 47 Hz, 100,021,079,989 ± 32 Hz, 99,507,959,988 ± 26 Hz, and 101,528,219,978 ± 36 Hz, respectively. Even though fTHz changed across many modes in the dual PC-THz combs, fTHz was determined correctly.

    Discussion

    One may wonder why such high precision was achieved in the real-time measurement of fTHz by using the dual-PC-THz combs without the stabilization of frep1 and frep2. The reason is that each PC-THz comb always functions as a frequency ruler with equal intervals and a linear scale regardless of whether or not frep1 and frep2 are stabilized. Such characteristics are inherent in frequency combs. Only if the temporal waveforms for frep1, frep2, fbeat1, and fbeat2, are acquired synchronously, fTHz can be determined without the influence of unstabilized frep1 and frep2, as demonstrated in Figs 7{ref-type="fig"}(f) and 9{ref-type="fig"}.

    The precision of 1.2 × 10^−9^ was achieved at a measurement rate of 100 Hz in the present setup; however, it was 100-times worse than that of the previous experiment with two independent free-running mode-locked lasers[@b10]. In the instantaneous-frequency-calculation algorithm[@b8], the precision is largely influenced by the signal-to-noise ratio (SNR) of the beat signals with fbeat1 and fbeat2[@b10]. The beat signals measured by LT-InGaAs/InAlAs PCAs in the present setup showed the much lower SNR than the signals measured by LT-GaAs PCAs in the previous setup due to high dark-current noise in the LT-InGaAs/InAlAs PCAs (not shown). Therefore, the difference in precision between them arises from the low SNR in beat signals rather than use of the free-running dual-λ mode-locked Er:fibre lasers. In other words, there is still some room to enhance the precision by improving the PCAs.

    ∆frep (= 1.63 kHz) in the dual-λ mode-locked fibre laser used here was relatively high compared with that (typically, less than several tens Hz) in dual mode-locked lasers used in the previous research[@b10]. In this case, we cannot neglect the dead band in the determination of m. In Fig. 1{ref-type="fig"} and Eqs. (1{ref-type="disp-formula"} to 6{ref-type="disp-formula"}), it is assumed that the beat signals at the lowest frequency (freq. = fbeat1 and fbeat2) are generated by the same mode number m of dual PC-THz combs (freq. = mfrep1 and mfrep2). The dead band is generated when fbeat1 and fbeat2 are generated by different mode numbers of the dual PC-THz combs. Figure 10{ref-type="fig"}(a) shows the optical spectrum when fTHz exists within the dead band, namely

    In this case, fbeat1 is generated by photoconductive mixing between fTHz and (m + 1)frep1, whereas fbeat2 is generated by photoconductive mixing between fTHz and mfrep2. The dead bandwidth ∆fdead is given by

    For example, when fTHz = 100 GHz, frep1 ≈ frep2 ≈ 32 MHz, ∆frep* = 1.63 kHz, and m = 3,125, ∆f~dead~ is estimated to be around 5.09 MHz, which corresponds to 16% of the measurement window with the frequency range of f~rep1~ or f~rep2. Figure 10{ref-type="fig"}(b) shows the real-time monitoring result of fTHz~ when f~THz~ was linearly tuned from 100,024,770,463 Hz to 100,044,423,685 Hz at a sweep rate of 19.653 MHz/s. One can confirm the measurement error of f~THz*~ caused by the dead band.

    The simplest way to reduce the dead band is to reduce ∆frep. There is still some room to further reduce ∆frep of the dual-λ mode-locked fibre laser down to a few hundred Hz by optimizing the fibre length and dispersion. In this case, it is expected that ∆fdead can be reduced to around 0.5 MHz, which corresponds to 1.6% of the measurement window. Work is in progress to develop a dual-λ mode-locked fibre laser with lower ∆frep.

    Conclusions

    We measured the absolute frequency of CW-THz radiation using dual PC-THz combs induced by a dual-λ mode-locked fibre laser. To the best of our knowledge, this is the first time such a laser system has been employed for frequency measurement in THz region. Although this laser was operating in the free-running mode without stabilization of frep1 and frep2, a relative precision and accuracy of 1.2 × 10^−9^ and 1.4 × 10^−9^ were achieved at a measurement rate of 100 Hz due to the common-mode behaviour of frep1 and frep2, in addition to the fact that the interval between the PC-THz comb modes was kept equal regardless of the fluctuation in frep1and frep2. Furthermore, an abrupt or slight change in fTHz could be accurately monitored due to the real-time capability thanks to the use of dual PC-THz combs. Although the dual-λ mode-locked fibre laser was used in this work for measuring the frequency of CW-THz radiation in real time, it should be possible to apply it to THz spectroscopy and other metrology applications based on dual THz combs, such as ASOPS THz time-domain spectroscopy[@b21][@b22][@b23][@b24], dual THz comb spectroscopy[@b25][@b26][@b27], and ASOPS THz impulse ranging[@b28]. In particular, the constant ∆frep in the free-running operation will enable correct scale conversion of the time axis or frequency axis in these spectroscopic applications. This dual-λ mode-locked fibre laser will open the door to enhance versatility and practicability in dual-THz-comb-based THz measurement systems.

    Methods

    Free-running, dual-λ mode-locked Er:fibre laser oscillator

    As shown in Fig. 2{ref-type="fig"}(a), the free-running, dual-λ mode-locked Er:fibre laser oscillator consists of a 980-nm pumped laser diode (LD), a 980/1550 nm wavelength-division multiplexer (WDM), a single-mode fibre (SMF), a 2 meter length of erbium-doped fibre (EDF, Changfei 1022), a polarization-independent optical isolator (ISO), a home-made single-wall carbon nanotube saturable absorber (SWNT-SA), a fibre-squeezer-based polarization controller (PC), a 90/10 fibre output coupler (OC), and an in-line polarizer (ILP) with two 0.25-meter-long polarization maintaining fibre (PMF) pigtails at both ends. The lengths of the commercial single-mode fibres (SMF-28 and HI 1060) in the cavity were estimated to be ~3.4 m and ~0.35 m, respectively, and therefore, the total dispersion was estimated to be ~0.063 ps/nm. The SWNT-SA had a transmittance of 24% at 1540 nm and was fabricated on an FC/APC ferrule from a ~0.27 wt% SWNT solution by using the optical deposition method. By introducing the ILP with its transmission aligned along the slow axis of the PMF into the ring fibre laser, birefringence-induced filtering and loss control effects enabled multi-wavelength lasing in the cavity[@b12][@b13][@b19]. With the adjustment of the intracavity polarization state, simultaneous mode-locking centred on the 1530-nm and 1560-nm regions could be realized. ∆frep was related to the cavity dispersion of the fibre laser, whereas frep1 and frep2 were related to be the fibre length; their values can be further adjusted by optimizing the fibre length and dispersion.

    Real-time determination of f THz with dual PC-THz combs

    Figure 5{ref-type="fig"} shows a schematic diagram of the setup for measuring the frequency of CW-THz radiation The amplified λ1 pulse light at frep1 from one EDFA (EDFA1) was collimated in free space and then focused onto a gap in a free-space-coupled, bowtie-shaped, low-temperature-grown (LT) InGaAs/InAlAs PCA (PCA1, TERA15-BT3, Menlo Systems) by a lens (L), whereas the amplified λ2 pulse light at frep2 from the other EDFA (EDFA2) was directly fed into a fibre-coupled, dipole-shaped LT-InGaAs/InAlAs PCA detector (PCA2, TERA 15-RX-FC, Menlo Systems) via an optical fibre. This resulted in the generation of dual PC THz combs: PC-THz comb 1 with a frequency spacing frep1 in PCA1 and PC-THz comb 2 with a frequency spacing frep2 in PCA2.

    The CW-THz test source was an active frequency multiplier chain (Millitech AMC-10-R0000 with multiplication factor = 6, tuning range = 75--110 GHz, and mean power = 2.5 mW), which amplified the output frequency of a microwave frequency synthesizer (Agilent E8257D, linewidth < 0.1 Hz) by a factor of six. Since this test source was phase-locked to a 10 MHz rubidium (Rb) frequency standard (Stanford Research Systems FS725, accuracy = 5 × 10^−11^, stability = 2 × 10^--11^ at 1 s), its output was CW-THz radiation with a linewidth of less than 0.6 Hz and a frequency accuracy similar to that of the frequency standard. When the CW-THz radiation was incident on both PCA1 and PCA2, photoconductive mixing between the CW-THz radiation and the dual PC-THz combs resulted in the output of a current signal from them. The current signals from PCA1 and PCA2 were amplified and filtered by current preamplifiers (AMP, bandwidth = 10 MHz, transimpedance gain = 10^5^ V/A), and the beat frequencies below half of frep1 or frep2 were extracted as fbeat1 and fbeat2.

    Portions of light from the EDFAs were detected with photodetectors (PD, Thorlabs DET01CFC, freq. bandwidth = 1.2 GHz). Since the output signal from the PDs included a fundamental component and a series of harmonic components of frep1 or frep2 within the frequency bandwidth of the PDs, we selected the 30-th harmonic component of frep1 or frep2, namely 30frep1 and 30frep2, in order to magnify the frequency fluctuation. The components 30frep1 and 30frep2 were electrically mixed with an output signal from a local oscillator (LO, fLO = 961,000,000.00 Hz) using a double-balanced mixer (M), and the resulting beat signals 30frep1 − fLO and 30frep2 − fLO were extracted by two low-pass filters (LPF). Temporal waveforms for fbeat1, fbeat2, 30frep1 − fLO, and 30frep2 − fLO were simultaneously acquired by a digitizer (resolution = 14 bit, sampling rate = 20 MHz). From the temporal waveforms, we determined instantaneous values of frep1, frep2, fbeat1, and fbeat2 using the instantaneous-frequency-calculation algorithm involving a Fourier transform, digital frequency filtering, an inverse Fourier transform, a Hilbert transform, the time differential of the instantaneous phase, and signal averaging[@b8]. Finally, we determined fTHz by substituting these values into Eqs. (4{ref-type="disp-formula"} to 6{ref-type="disp-formula"}). Since the CW-THz test source, the local oscillator, and the clock signals of the digitizer shared a common time-base signal from the frequency standard, one can evaluate the relative precision of frequency measurement without the influence of the absolute precision of the frequency standard.

    Additional Information

    How to cite this article: Hu, G. et al. Measurement of absolute frequency of continuous-wave terahertz radiation in real time using a free-running, dual-wavelength mode-locked, erbium-doped fibre laser. Sci. Rep. 7, 42082; doi: 10.1038/srep42082 (2017).

    Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

    The work at Beihang University was supported by the 973 Program (2012CB315601), NSFC (61521091/61435002) and with Fundamental Research Funds for the Central Universities, Beihang PhD Student Funds for Short-term Visiting Study and the Academic Excellence Foundation of BUAA for PhD Students. The work at Tokushima University was supported by the Exploratory Research for Advanced Technology (ERATO) MINOSHIMA Intelligent Optical Synthesizer Project, Japan Science and Technology Agency (JST), Japan.

    The authors declare no competing financial interests.

    Author Contributions T.Y. and Z.Z. conceived the project. G.H., X.Z., Y.Y., C.L., and M.B. constructed the dual-λ mode-locked Er:fibre laser. G.H., Tat. Miz., Tak. Min., and Tak. Miz. performed the experiments and analysed the data. G.H., Z.Z., and T.Y. wrote the manuscript. All authors discussed the results and commented on the manuscript.

    [image: Relative positions of fTHz, mfrep1, and mfrep2.(a) fTHz < mfrep1* < mfrep2, (b) mfrep1 < fTHz < mfrep2, and (c) mfrep1 < mfrep2 < f*THz.] {#f1}

    [image: (a) Configuration of free-running dual-λ mode-locked Er-doped fibre laser oscillator. LD, 980-nm pump diode; WDM, 980/1550 nm wavelength-division multiplexer; SMF, single-mode fibre; EDF, erbium-doped fibre; ISO, polarization-independent optical isolator; SWNT-SA, single-wall carbon nanotube saturable absorber; PC, fibre-squeezer-based polarization controller; OC, 90/10 fibre output coupler; ILP, in-line polarizer; PMF, polarization maintaining fibre. (b) Optical spectrum and (c) RF spectrum of the output light from the laser oscillator.] {#f2}

    [image: (a) Optical spectra and (b) RF spectra of the λ1 and λ2 pulsed light after passing through the CWDM bandpass filter. (c) Optical spectra of the amplified λ1 and λ2 pulsed light. (d) and (e) Auto-correlation waveforms of the amplified λ1 and λ2 pulsed light after dispersion compensation.] {#f3}

    [image: (a) Frequency fluctuations of frep1 and frep2 with respect to gate time. Temporal fluctuations of (b) δfrep1 and δfrep2 and (c) ∆frep.] {#f4}

    [image: Experimental setup of THz-comb-referenced frequency measurement.Dual-λ ML-FL, free-running dual-λ mode-locked Er-doped fibre laser oscillator; CWDM-BPF, coarse-wavelength-division-multiplexing bandpass filter; EDFA1 and EDFA2, Er-doped fibre amplifiers; L, lens; PCA1, free-space-coupled, bowtie-shaped, low-temperature-grown (LT) InGaAs/InAlAs photoconductive antenna; PCA2, fibre-coupled, dipole-shaped LT-InGaAs/InAlAs PCA detector; PD, photodetectors; M, double-balanced mixer; LPF, low-pass filter; AMP, current preamplifiers; LO, local oscillator; BS, beam splitters.] {#f5}

    [image: Temporal changes of δfbeat1 and δfbeat2 when (a) fTHz < mfrep1* < mfrep2, (b) mfrep1 < fTHz < mfrep2, and (c) mfrep1 < mfrep2 < f*THz.] {#f6}

    [image: Temporal waveforms of (a) frep1, (b) frep2, (c) fbeat1, (d) fbeat2, (e) m, and (f) fTHz when fTHz was fixed at 100,020,240,000 Hz. The measurement rate was 100 Hz.] {#f7}

    [image: Measurement precision with respect to the measurement rate and the corresponding measurement time.] {#f8}

    [image: Real-time monitoring of fTHz when fTHz was suddenly or slightly changed.Inset shows the magnified fluctuation of fTHz from 0 s to 0.864 s.] {#f9}

    [image: (a) Dead band of fTHz determination. (b) Measurement errors in the real-time monitoring of fTHz when fTHz is linearly tuned 100,024,770,463 Hz to 100,044,423,685 Hz.] {#f10}

  2. Assistant

    [sys1] Terahertz (THz) radiation has huge potential for high-speed communications, but accurately measuring its frequency without cryogenic cooling is a significant challenge. Photoconductive mixing using THz frequency combs could provide a solution for precise, real-time measurements. Recent advancements include methods for generating dual PC-THz combs from a single laser source, enhancing measurement speed and practicality. [end sys1]

    [sys2] 2.1 Understand the Problem: Objective: Explore how leveraging dual-mode-locked lasers can improve the real-time determination of THz frequencies.

    Reflection: "I understand that precise THz frequency measurement is critical, especially for advancing wireless communication. The challenge is achieving high precision without overly complex or costly setups. What are the specific limitations of existing methods that this new approach could address?"

    Creative Perspective: "Consider the broader implications of THz radiation beyond communication. Could this technology impact other fields, such as medical imaging or diagnostics? What potential developments could arise from more accessible THz measurement techniques?"

    2.2 Analyze the Information: Objective: Examine the dual PC-THz comb technique for its effectiveness and potential improvements.

    Reflection: "Am I fully grasping the technical detail behind this photoconductive mixing method and its benefits over traditional techniques? Could integrating existing technologies further enhance this process?"

    Creative Perspective: "Is there a possibility of applying similar principles to other parts of the electromagnetic spectrum? What might adaptations look like for different scientific applications, such as astronomy or environmental sensing?"

    2.3 Generate Hypotheses:

    1. Dual-mode-locked lasers enhance precision over single laser systems by reducing measurement error. (Confidence: 0.9, Creative: 0.6)
    2. This method may decrease costs and complexity, encouraging broader adoption in various industries. (Confidence: 0.8, Creative: 0.7)
    3. The technique could facilitate advancements in other fields, such as medical diagnostics or non-invasive imaging. (Confidence: 0.5, Creative: 0.8)
    4. Dual PC-THz combs allow for unique adaptability to different measurement conditions, improving versatility. (Confidence: 0.7, Creative: 0.7)
    5. This method might spur development of new THz-based technologies and applications. (Confidence: 0.6, Creative: 0.8)
    6. It offers a pathway for enhancing the frequency stability of modus operandi in free-running systems. (Confidence: 0.7, Creative: 0.5)
    7. Collaboration with optical spectroscopy techniques could lead to breakthroughs in both fields. (Confidence: 0.4, Creative: 0.9)
    8. Application in THz spectroscopy could refine time-domain spectroscopic techniques. (Confidence: 0.5, Creative: 0.8)
    9. Optimizing dual-λ mode-locked lasers may further refine precision and reduce operational noise. (Confidence: 0.8, Creative: 0.6)
    10. The flexibility of this system could allow seamless integration with existing THz equipment. (Confidence: 0.6, Creative: 0.7)

    Reflection: "Have I covered a broad spectrum of possibilities? Are there radical ideas that could generate an edge in this technological advancement?"

    Creative Perspective: "Could cross-disciplinary insights offer unexpected solutions or enhancements to this method?"

    2.4 Anticipate Future Steps and Obstacles: Objective: Predict potential improvements and challenges in real-time THz measurement technology.

    Reflection: "What technical or market challenges could arise from integrating this into existing technologies? Is there a clear path for scalability?"

    Creative Perspective: "Could unforeseen advancements in related fields, like AI or machine learning, optimize these systems beyond current expectations?"

    2.5 Evaluate Hypotheses: Objective: Weigh each hypothesis based on practical feasibility and potential impact.

    Reflection: "Am I objectively analyzing the potential and risks associated with each hypothesis? How might these insights inform strategic decisions?"

    Creative Perspective: "Could novel uses or market demands shift the perceived utility of these advancements?"

    2.6 Select the Best Hypothesis: Objective: Choose the hypothesis with the highest potential for strategic implementation.

    Reflection: "Why does this hypothesis stand out? How effectively does it align with industry trends and future opportunities?"

    Creative Perspective: "What unique resources or strategies could amplify the effectiveness of the chosen approach?"

    2.7 Implement the Hypothesis: Objective: Develop actionable steps to test and refine the selected hypothesis.

    Reflection: "Are there specific milestones or resources needed for successful execution? How do we ensure flexibility in response to unforeseen challenges?"

    Creative Perspective: "Can we leverage partnerships or industry collaborations to accelerate development and deployment?"

    2.8 Monitor and Review Progress: Objective: Continuously assess and adjust the implementation strategy.

    Reflection: "What indicators will define success or areas needing improvement? Have unexpected opportunities or challenges emerged?"

    Creative Perspective: "Can patterns from current results guide new strategies or approaches?"

    2.9 Reflect and Capture Insights: Objective: Synthesize lessons learned for future endeavors in THz measurement.

    Reflection: "What has this process revealed about both the technology and its market potential?"

    Creative Perspective: "How can these insights inspire innovation in other domains or motivate further cross-disciplinary research?"

    [end sys2]

    [sys1] This new THz frequency measurement technique achieves precision without complex systems. The method, using dual PC-THz combs, shows promise for expanding THz technology access. Continuous review and adaptation will be key to maximize its impact and explore broader applications across various fields. [end sys1]