Untitled conversation
- User
[20241108-12:27:24] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 42118 [20241108-12:27:26] [ERROR] pam_authenticate failed: Authentication failure [20241108-12:27:26] [INFO ] Username or password error for user: nvidia [20241108-12:27:26] [ERROR] sesman_data_in: scp_process_msg failed [20241108-12:27:26] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans [20241108-12:27:44] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 50202 [20241108-12:27:45] [ERROR] pam_authenticate failed: Authentication failure [20241108-12:27:45] [INFO ] Username or password error for user: nvidia [20241108-12:27:45] [ERROR] sesman_data_in: scp_process_msg failed [20241108-12:27:45] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans
- Assistant
It looks like you're encountering authentication failures when attempting to log in as the user
nvidiavia a remote desktop connection. The error messages indicate that the Pluggable Authentication Module (PAM) is failing to authenticate the user. Here's a breakdown of what's happening and steps you can take to troubleshoot and resolve the issue.
Understanding the Error Messages
-
Connection Received:
[INFO ] Socket 8: AF_INET6 connection received from ::1 port 42118- A connection attempt is being made from the local machine (
::1is the IPv6 loopback address).
- A connection attempt is being made from the local machine (
-
Authentication Failure:
[ERROR] pam_authenticate failed: Authentication failure [INFO ] Username or password error for user: nvidia- The PAM module failed to authenticate the user
nvidia. This usually means the username or password is incorrect, or there's an issue with the user account.
- The PAM module failed to authenticate the user
-
Session Manager Errors:
[ERROR] sesman_data_in: scp_process_msg failed [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans- These errors are from the session manager (likely
xrdp-sesman), indicating that it couldn't process the authentication message and is terminating the connection.
- These errors are from the session manager (likely
Possible Causes
- Incorrect Credentials: The username or password for the
nvidiaaccount is incorrect. - Locked or Expired Account: The user account may be locked or the password expired.
- PAM Configuration Issues: The PAM configuration for the remote desktop service may be misconfigured.
- User Account Restrictions: The account might be restricted from remote logins.
- Home Directory or Permission Issues: Missing or misconfigured home directory can prevent login.
- Security Policies: SELinux or AppArmor may be blocking the authentication.
Troubleshooting Steps
1. Verify the
nvidiaUser Account-
Check if the User Exists:
id nvidia- Confirm that the
nvidiauser exists on the system.
- Confirm that the
-
Check Account Status:
sudo passwd -S nvidia- Ensure the account is not locked (
LK) and the password has not expired.
- Ensure the account is not locked (
-
Reset the Password:
sudo passwd nvidia- Set a new password for the
nvidiauser.
- Set a new password for the
2. Test Local Login
- Try logging in locally (e.g., via SSH or a terminal) using the
nvidiaaccount to ensure that the credentials work.
3. Check PAM Configuration for
xrdp-
Locate the PAM Configuration Files:
- Check
/etc/pam.d/for files related toxrdp, such asxrdp-sesman.
- Check
-
Compare with SSH PAM Configuration:
- If SSH logins work, compare
/etc/pam.d/sshdwith thexrdpPAM configuration to spot differences.
- If SSH logins work, compare
-
Ensure Proper PAM Modules are Included:
- The
xrdpPAM configuration should include modules for authentication, account verification, session management, and password updates.
Example
xrdp-sesmanPAM configuration:auth required pam_unix.so auth include system-auth account required pam_unix.so account include system-auth session required pam_loginuid.so session required pam_unix.so session include system-auth - The
4. Check User Restrictions
-
Access Control Files:
- Ensure the user is not denied access in
/etc/security/access.conf.
- Ensure the user is not denied access in
-
Allow Remote Login:
- Confirm that the
nvidiauser is allowed to log in remotely. - Check
/etc/ssh/sshd_configforAllowUsersorDenyUsersdirectives.
- Confirm that the
5. Verify Home Directory and Shell
-
Check Home Directory:
ls -ld /home/nvidia- Ensure the home directory exists and has the correct permissions (
700or750).
- Ensure the home directory exists and has the correct permissions (
-
Check User Shell:
grep nvidia /etc/passwd- Ensure that the user has a valid shell such as
/bin/bash.
- Ensure that the user has a valid shell such as
6. Review SELinux or AppArmor Logs
-
For SELinux:
- If SELinux is enabled, check for denials:
sudo ausearch -m avc -ts recent - Temporarily set SELinux to permissive mode to test:
sudo setenforce 0
- If SELinux is enabled, check for denials:
-
For AppArmor:
- Check if AppArmor profiles are enforcing restrictions:
sudo aa-status - Look for
xrdpandxrdp-sesmanprofiles.
- Check if AppArmor profiles are enforcing restrictions:
7. Examine System Authentication Logs
- Check Auth Logs:
- On Ubuntu/Debian:
sudo tail -f /var/log/auth.log - On CentOS/RHEL:
sudo tail -f /var/log/secure - Observe the logs while attempting to log in to capture detailed error messages.
- On Ubuntu/Debian:
8. Restart
xrdpServices-
Restart Services:
sudo systemctl restart xrdp xrdp-sesman- Ensure that the services are running properly.
-
Check Service Status:
sudo systemctl status xrdp xrdp-sesman
9. Update
xrdpand Related Packages- Update System Packages:
sudo apt update && sudo apt upgrade- On RHEL/CentOS:
sudo yum update - Ensure that you have the latest version of
xrdpand its dependencies.
- On RHEL/CentOS:
10. Verify
xrdpConfiguration-
Check Session Configuration:
- Verify that the session file (e.g.,
~/.xsession,/etc/xrdp/startwm.sh) is correctly set up for the desktop environment you're using.
- Verify that the session file (e.g.,
-
Example for Using
xfce:echo "startxfce4" > ~/.xsession- Ensure that the desktop environment is installed and properly configured.
11. Examine Firewall Settings
- Check if Ports are Open:
sudo ufw status- Ensure that the RDP port (default
3389) is allowed.
- Ensure that the RDP port (default
12. Check for Duplicate Sessions
-
Clean Up Old Sessions:
- Sometimes, stale sessions can cause authentication issues.
sudo pkill -u nvidia -
Remove Temporary Files:
sudo rm -rf /tmp/.X11-unix/*
Additional Questions
To provide more precise assistance, could you please share:
-
Local Login Success:
- Can you log in as the
nvidiauser locally on the machine?
- Can you log in as the
-
Other Users:
- Do other user accounts experience the same issue when logging in via remote desktop?
-
Recent Changes:
- Have there been any recent changes to the system, such as updates, configuration changes, or new software installations?
-
Complete Log Entries:
- Are there any additional error messages in the authentication logs (
/var/log/auth.logor/var/log/secure)?
- Are there any additional error messages in the authentication logs (
-
Operating System Details:
- Which Linux distribution and version are you using?
Example of Deeper Log Analysis
-
Inspect PAM Debug Logs:
- Increase PAM logging verbosity to capture more details.
-
Enable
xrdpDebug Logging:- Modify
/etc/xrdp/xrdp.ini:[Logging] LogLevel=DEBUG - Restart
xrdpservices.
- Modify
-
Review Logs Again:
- Check
/var/log/xrdp.logand/var/log/xrdp-sesman.logfor detailed information.
- Check
Conclusion
Authentication issues can be caused by a variety of factors, but systematically going through these steps should help identify and resolve the problem. If after trying these suggestions you're still unable to log in, please provide the additional information requested, and I'll be happy to assist you further.
-