Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-08-06· OpenAIAi2 WildChat-4.8M (AI2)

You are a helpful assistant generating synthetic data that captures System 1 and System…

  1. User

    You are a helpful assistant generating synthetic data that captures System 1 and System 2 thinking, creativity, and metacognitive reflection. Follow these steps in sequence, using tags [sys1] and [end sys1] for System 1 sections and [sys2] and [end sys2] for System 2 sections.

    1. Identify System 1 and System 2 Thinking Requirements:

      • Carefully read the text.
      • Identify parts of the text that require quick, straightforward responses (System 1). Mark these sections with [sys1] and [end sys1].
      • Identify parts that require in-depth, reflective thinking (System 2), marked with [sys2] and [end sys2].
    2. Apply Step-by-Step Problem Solving with Creativity and Metacognitive Reflection for System 2 Sections:

      2.1 Understand the Problem:

      • Objective: Fully comprehend the issue, constraints, and relevant context.
      • Reflection: "What do I understand about this issue? What might I be overlooking?"
      • Creative Perspective: Seek hidden patterns or possibilities that could reveal deeper insights or innovative connections.

      2.2 Analyze the Information:

      • Objective: Break down the problem logically.
      • Reflection: "Am I considering all factors? Are there any assumptions that need challenging?"
      • Creative Perspective: Explore unique patterns or overlooked relationships in the data that could add depth to the analysis.

      2.3 Generate Hypotheses:

      • Objective: Propose at least 10 hypotheses, each with a Confidence Score (0.0 to 1.0) and Creative Score (0.0 to 1.0), reflecting originality, surprise, and utility.
      • Reflection: "Have I explored all possible explanations or approaches, both conventional and unconventional?"
      • Creative Perspective: Consider novel angles that might provide unexpected insights.

      2.4 Anticipate Future Steps and Obstacles:

      • Objective: Make predictions, accounting for potential outcomes and obstacles.
      • Reflection: "What challenges might I face? Is my plan flexible for different scenarios?"
      • Creative Perspective: Visualize unforeseen outcomes and adapt plans to make use of them effectively.

      2.5 Evaluate Hypotheses:

      • Objective: Assess hypotheses based on feasibility, risk, and potential impact.
      • Evaluation: Refine Confidence and Creative Scores as needed.
      • Reflection: "Am I unbiased in my assessment? Which options fit best with the overall objectives?"
      • Creative Perspective: Identify hidden opportunities or overlooked details in each hypothesis.

      2.6 Select the Best Hypothesis:

      • Objective: Choose the most promising, strategic hypothesis.
      • Reflection: "Why does this hypothesis stand out? How does it uniquely address the issue?"
      • Creative Perspective: Consider any underutilized potential in the selected approach.

      2.7 Implement the Hypothesis:

      • Objective: Outline actionable steps for testing the hypothesis.
      • Reflection: "Is this plan practical? What resources or preparation are required?"
      • Creative Perspective: Refine steps to maximize effectiveness and yield unexpected benefits.

      2.8 Monitor and Review Progress:

      • Objective: Review progress, noting areas for improvement.
      • Reflection: "What’s working well? What could be improved?"
      • Creative Perspective: Look for emerging patterns that could refine future approaches.

      2.9 Reflect and Capture Insights:

      • Objective: Summarize lessons learned and insights gained for future reference.
      • Reflection: "What new understanding has emerged from this process?"
      • Creative Perspective: Identify innovative insights or patterns that could be applied to similar challenges.
    3. Generate Text Output with Interleaved System 1 and System 2 Responses:

      • Use the tags [sys1] and [sys2] throughout.
      • Aim for a lengthier, detailed response. Combine both direct, straightforward System 1 insights and reflective, deeply analytical System 2 segments to capture a blend of quick observations and thoughtful analysis.

    Example Input Text:

    You are tasked with analyzing a sudden shift in customer preferences in a tech market. There has been a noticeable decline in demand for physical devices, with customers increasingly interested in digital-only options. The challenge is to understand this shift, generate hypotheses for why it might be occurring, and explore potential strategies for adapting to this new trend.


    Processed Output with System 1 and System 2 Thinking:

    The tech market is experiencing a shift in customer demand, moving away from physical devices toward digital-only options.

    [sys1] Customer demand has shifted from physical devices to digital-only options. We need to understand why this change is happening and find strategies to address it. Key factors may include cost, convenience, and technological trends. [end sys1]

    [sys2] 2.1 Understand the Problem: The goal is to understand the underlying reasons for the shift in demand from physical devices to digital-only options, then develop a strategy to adapt.

    Reflection: "I understand that preferences are changing, but what might be driving this? Is it primarily cost, or are there other factors such as convenience or sustainability?"

    Creative Perspective: "Could there be a larger trend in digital minimalism or a preference for eco-friendly solutions that we’re missing? What unseen motivations might explain this shift?"

    2.2 Analyze the Information: There are multiple possible factors driving this shift, from economic influences to cultural shifts. It’s essential to isolate each factor and understand its impact.

    Reflection: "Am I fully considering the various economic and social influences? Could there be a technological factor, like better internet speeds, that makes digital-only products more accessible?"

    Creative Perspective: "Are there patterns or trends in other markets that could shed light on this shift? Could this be part of a larger trend toward virtual experiences?"

    2.3 Generate Hypotheses:

    1. Customers prefer digital options due to lower costs. (Confidence: 0.8, Creative: 0.4)
    2. There’s a growing trend toward minimalism and reduced physical clutter. (Confidence: 0.7, Creative: 0.7)
    3. Digital products offer greater flexibility and ease of use. (Confidence: 0.6, Creative: 0.6)
    4. Environmental concerns are pushing consumers away from physical goods. (Confidence: 0.6, Creative: 0.8)
    5. Advances in tech make digital-only options more functional. (Confidence: 0.8, Creative: 0.5)
    6. Pandemic-era remote work increased demand for digital solutions. (Confidence: 0.7, Creative: 0.6)
    7. Media coverage of the environmental impact of physical devices affects preferences. (Confidence: 0.5, Creative: 0.7)
    8. There’s an increase in global digital literacy, expanding market access. (Confidence: 0.6, Creative: 0.6)
    9. Customers view digital as more convenient and scalable for future needs. (Confidence: 0.7, Creative: 0.5)
    10. Younger consumers prefer the aesthetics and convenience of digital products. (Confidence: 0.6, Creative: 0.6)

    Reflection: "Have I considered all possible influences? Are there any surprising factors that could explain this shift?"

    Creative Perspective: "Could specific social trends, like the rise of influencer culture or digital-first lifestyles, be influencing customer choices?"

    2.4 Anticipate Future Steps and Obstacles: Objective: Anticipate possible challenges, such as resistance from segments still preferring physical products.

    Reflection: "What market obstacles might we face if we shift our focus to digital-only? Are there sub-segments that still prioritize physical products?"

    Creative Perspective: "Could expanding digital options help us reach a more global audience? Are there emerging trends that we could leverage in our strategy?"

    [end sys2]

    [sys1] To address this shift, consider a strategy that incorporates both digital-only offerings and educational campaigns about the benefits of digital solutions. Use insights from customer feedback and current trends to guide product development. Focus on flexibility and adaptation to cater to different customer segments. [end sys1]

    Introduction {#Sec1}

    Diabetes mellitus is a metabolic disorder resulting from inadequate secretion of insulin characterized by chronic hyperglycemia caused by high calorie diets rich in fat, carbohydrates and proteins (Kumar et al. [@CR19]). The International Diabetes Foundation (IDF) reports that there were 425 million diagnosed cases of diabetes globally in 2017 which is estimated to increase to 629 million by 2045. Recently, there are more than 46 million diabetics in North America and the Caribbean, 58 million in Europe, 26 million in South and Central America, 39 million in Middle East and North Africa, 16 million in Africa and 82 million in South-East Asia. There are 352 million people at the risk of developing Type II diabetes (IDF Diabetes Atlas [@CR13]). The emerging factors that contribute to the spread of Type II diabetes, comprising a progressively technological society, food habits with high calorie diets rich in fats and carbohydrates, and an increasingly inactive lifestyle (Wagman et al. [@CR42]). Type II diabetes is associated with hypertension, dyslipidemia, obesity, cardiovascular disease, etc. It may also eventually cause tissue or vascular damage leading to severe diabetic complications such as retinopathy, neuropathy, and nephropathy (Keri et al. [@CR17]). Out of several enzymes known, α-amylase and α-glucosidase are the key enzymes in the lowering of postprandial hyperglycemia observed in case of Type II diabetes mellitus (T2DM) (Patil et al. [@CR33]). α-Amylase inhibits dietary starch from being absorbed into the body system and leads to lowering of blood glucose by the inhibition of salivary and pancreatic amylase (Ajiboye et al. [@CR3]). α-Glucosidase inhibitors have been reported to reduce postprandial hyperglycemia in diabetic mellitus resulting in the lowering of glucose absorption by carbohydrate digestion and increases digestion time (Chaudhry et al. [@CR8]).

    Likewise, the emergence of bacterial resistance of pathogenic microorganisms is rapidly becoming a major worldwide problem (Mor et al. [@CR28]). Therefore, the demand for new antimicrobial agents is necessary, but now days, it leads to a challenging task for chemists to synthesize new molecules with excellent activity (Kim et al. [@CR18]).

    In the recent years, indeno-fused heterocycles are recognized as important frameworks with a broad spectrum of pharmacological properties. Among them, indenopyrazoles have gained substantial attention due to their wide range of biological activities such as antitubercular (Ahsan et al. [@CR1]), tyrosine kinase inhibitors (Khan et al. [@CR15]), CNS agents (Lemke et al. [@CR21]), antioxidant activity (Mor et al. [@CR29]), non-steroidal anti-inflammatory drugs (Lemke et al. [@CR20]), anticancer (Mor et al. [@CR26]), antimicrobial (Shareef et al. [@CR39]), anti-HIV and anticonvulsant activities (Ahsan et al. [@CR2]), and cyclin-dependent kinase (CDK) inhibitors (Singh et al. [@CR40]). Moreover, methyl 3-((6-methoxy-1,4-dihydroindeno[1,2-c]pyrazol-3-yl)amino)benzoate was the first indenopyrazole that was reported as a Tubulin Polymerization Inhibitor (Minegishi et al. [@CR25]).

    Similarly, benzothiazole is a privileged bicyclic ring system associated with numerous pharmacological activities like antitumor (Gabr et al. [@CR11]), anticonvulsant (Amnerkar and Bhusari [@CR4]), antimicrobial (Chugunova et al. [@CR9]; Kamal et al. [@CR14]), antihelmintic (Sarkar et al. [@CR35]), antileishmanial (Keri et al. [@CR17]), antitubercular (Patel et al. [@CR32]), anti-inflammatory (Shafi et al. [@CR38]), antipsychotic (Yevich et al. [@CR45]), antioxidant (Bhat and Belagali [@CR5]), antidiabetic (Meltzer-Mats et al. [@CR24]; Kamal et al. [@CR14]) activities, etc. Some of the important marketed drugs involving benzothiazole nucleus are riluzole, sibenadet hydrochloride (Viozan), and pramipexole (Scott and Njardarson [@CR36]). Zopolrestat is another significant drug containing benzothiazole core with antidiabetic effects (Carvalho et al. [@CR7]).

    To the best of our knowledge as revealed by literature surveys (Khan et al. [@CR15]), none of hetrocycles with indenopyrazole skeleton have been reported to exhibit antidiabetic effects. Therefore, we thought of synthesizing some new benzothiazole tethered indenopyrazoles to see the additive effect of these moieties towards the preliminary examination of in vitro antidiabetic activity (Doddaramappa et al. [@CR10]). In this perspective and in continuation of our interest in the synthesis of heterocycles containing nitrogen (Zhou et al. [@CR47]; Huang and Huang [@CR12]) and sulfur as heteroatoms and their biological activities herein, we report the synthesis, characterization, α-amylase and α-glucosidase inhibition, antimicrobial evaluation and docking studies of several benzothiazole tethered indeno[1,2-c]pyrazol-4(1H)-ones (4a‒o).

    Materials and methods {#Sec2}

    Chemistry {#Sec3}

    All reagents were used without any further purification. Melting points were observed using Electrothermal Melting Point apparatus, LABCO Co., India and are not corrected. The FT-IR spectra were recorded in KBr on IR affinity-1 FTIR (Shimadzu) spectrophotometer, and results are reported in cm^−1^. ^1^H NMR and ^13^C NMR spectra were recorded on Bruker AVANCE III NMR spectrometer operating at 400 and 100 MHz, respectively, with CDCl3 as the solvent and tetramethylsilane (TMS) as the internal standard. Chemical shifts (δ) are reported in parts per million (ppm), and coupling constants (J) are expressed in Hertz (Hz). HRMS were obtained from Waters Synapt G2-Si QTOF and SCIEX 5600^+^ QTOF mass analyser by using the electrospray ionization (ESI) method. The purity of synthesized compounds was checked by precoated TLC plates (SIL G/UV254, ALUGRAM) using a mixture of hexane and ethyl acetate as eluent and visualization was achieved via UV light.

    General procedure for the synthesis of 2-acyl-(1H)-indene-1,3(2H)-diones (1) {#Sec4}

    2-Acyl-(1H)-indene-1,3(2H)-diones (1) needed for the purpose were prepared via Claisen condensation of diethylphthlate and appropriate aliphatic ketones in presence of freshly prepared sodium methoxide following the procedure presented in literature (Mor et al. [@CR26]).

    General procedure for the synthesis of 2-hydrazinylbenzo[d]thiazole/2-hydrazinyl-6-substitutedbenzo[d]thiazoles (2) {#Sec5}

    Benzo[d]thiazol-2-amine/6-substitutedbenzo[d]thiazol-2-amines were prepared by the reaction of aniline/4-substituted anilines and sodium thiocyanate in bromine/glacial acetic acid solution under stirring for 16 h. After completion of reaction, the salt of benzo[d]thiazol-2-amine/6-substitutedbenzo[d]thiazol-2-amines thus obtained was filtered through suction and washed with hexane. Thereafter, the salt was dissolved in water upon warming and the product was precipitated by adding dil. NaOH solution. The solid thus formed was filtered through suction and recrystallized from ethanol to afford the corresponding amines in high yields (Mor et al. [@CR28]). To a solution of hydrazine hydrochloride in ethylene glycol was added the appropriate benzo[d]thiazol-2-amine/6-substitutedbenzo[d]thiazol-2-amines in portions with continuous stirring and the resulting mixture was heated to reflux on a heating mantle for 2 h. A fine crystalline solid was separated out on cooling which was filtered, washed with water and crystallized from rectified sprit to yield the corresponding 2-hydrazinylbenzo[d]thiazole/2-hydrazinyl-6-substitutedbenzo[d]thiazoles (2) in good yields (Mor et al. [@CR28]).

    General procedure for the synthesis of benzothiazolyl hydrazones (3) {#Sec6}

    A solution of equimolar quantities of 2-acyl-(1H)-indene-1,3(2H)-diones (1, 3 mmol) and hydrazines (2, 3 mmol) in dry methanol (15 mL) was heated on a water bath for 15 min in presence of catalytic amount of glacial acetic acid (4--5 drops). Thereafter, reaction mixture was cooled at room temperature. The solid thus separated out was filtered through suction and recrystallized from ethyl acetate-ethanol to give the corresponding benzothiazolyl hydrazones (3a‒o) as orange solids (Sawhney and Lemke [@CR37]; Mor et al. [@CR29]).

    General procedure for the synthesis of indeno[1,2-c]pyrazol-4-ones (4a--o) {#Sec7}

    Benzothiazolyl hydrazones (3) were charged with glacial acetic acid (30 mL) and heated to reflux on a heating mantle for 7--9 h till the completion of reaction as indicated by TLC. The reaction mixture was cooled at room temperature and the solid thus obtained was filtered, and recrystallized from chloroform to furnish the target compounds 4a--o in good yields. The physical and spectral data of compounds 4a--o are as follows:

    1-(Benzo[d]thiazol-2-yl)-3-methylindeno[1,2-c]pyrazol-4(1H)-one (4a) [image] {#d29e625} {#FPar1}

    Yellow solid; yield: 62%; mp 238--240 °C; FTIR (KBr): νmax 798, 1093, 1381, 1498, 1543, 1598 (C=N stretch), 1707 (C=O stretch), 2850, 2960 (aliphatic C--H stretch), 3068 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 2.45 (3H, s, CH3), 7.35--7.44 (2H, m, Ar-H), 7.50--7.55 (2H, m, Ar-H), 7.60 (1H, d, J = 7.20 Hz, Ar-H), 7.88 (1H, d, J = 7.96 Hz, Ar-H), 8.03 (1H, d, J = 8.12 Hz, Ar-H), 8.54 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 29.68 (CH3), 121.36, 121.69, 122.83, 124.09, 124.29, 124.54, 125.45, 126.75, 130.69, 132.58, 133.32, 133.58, 140.10, 148.70, 150.95, 158.73, 184.34 (C-4) ppm; HRMS: m/z (M^+^) Cacld. for C18H11N3OS: 317.0623, found: 318.0680 [M+H]^+^.

    3-Methyl-1-(6-methylbenzo[d]thiazol-2-yl)indeno[1,2-c]pyrazol-4(1H)-one (4b): [image] {#d29e697} {#FPar2}

    Yellow solid; yield 67%; mp 215--218 °C; FTIR (KBr): νmax 798, 1087, 1386, 1500, 1550, 1606 (C = N stretch), 1712 (C=O stretch), 2848, 2954 (aliphatic C--H stretch), 3075 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 2.44 (3H, s, CH3), 2.51 (3H, s, CH3), 7.32--7.38 (2H, m, Ar-H), 7.49--7.53 (2H, m, Ar-H), 7.59 (1H, d, J = 7.08 Hz, Ar-H), 7.66 (1H, s, Ar-H), 7.90 (1H, d, J = 8.28 Hz, Ar-H), 8.53 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ= 22.70 (CH3), 31.94 (CH3), 121.49, 122.38, 123.97, 124.27, 124.54, 128.26, 130.64, 132.63, 133.45, 133.57, 135.73, 140.16, 143.67, 148.56, 148.94, 158.58, 184.38 (C-4); HRMS: m/z (M^+^) Cacld. for C19H13N3OS: 331.0779, found: 332.0839 [M+H]^+^.

    1-(6-Methoxybenzo[d]thiazol-2-yl)-3-methylindeno[1,2-c]pyrazol-4(1H)-one (4c): [image] {#d29e774} {#FPar3}

    Yellow solid; yield 69%; mp 210--212 °C; FTIR (KBr): νmax 761, 1097, 1373, 1500, 1556, 1606 (C=N stretch), 1716 (C=O stretch), 2918, 2962 (aliphatic C--H stretch), 3086 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 2.44 (3H, s, CH3), 3.90 (3H, s, OCH3), 7.11 (1H, dd, J = 2.52, J = 8.92 Hz, Ar-H), 7.31--7.40 (2H, m, Ar-H), 7.49--7.60 (2H, m, Ar-H), 7.90 (1H, d, J = 8.88 Hz, Ar-H), 8.49 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 29.79 (CH3), 55.98 (OCH3), 115.94, 121.49, 121.64, 123.51, 124.36, 124.54, 130.31, 130.71, 132.70, 133.64, 134.14, 134.77, 140.27, 145.25, 148.58, 158.06, 184.46 (C-4); HRMS: m/z (M^+^) Calcd. for C19H13N3O2S: 347.0728, found: 348.0786 [M+H]^+^.

    1-(6-Chlorobenzo[d]thiazol-2-yl)-3-methylindeno[1,2-c]pyrazol-4(1H)-one (4d): [image] {#d29e852} {#FPar4}

    Yellow solid; yield 62%; mp 228--230 °C; FTIR (KBr): νmax 798, 1099, 1371, 1494, 1546, 1598 (C=N stretch), 1712 (C=O stretch), 2920, 2962 (aliphatic C--H stretch), 3089 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 2.45 (3H, s, CH3), 7.36--7.57 (4H, m, Ar-H), 7.86 (1H, d, J = 1.84 Hz, Ar-H), 7.94 (1H, d, J = 8.48 Hz, Ar-H), 8.48 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 25.29 (CH3), 121.01, 121.41, 121.58, 123.59, 124.42, 127.59, 130.48, 130.85, 131.29, 132.42, 133.64, 134.23, 134.49, 140.01, 148.95, 149.50, 184.30 (C-4); HRMS: m/z (M^+^) Calcd. for C18H10ClN3OS: 351.0233, found: 352.0291 [M+H]^+^.

    1-(6-Bromobenzo[d]thiazol-2-yl)-3-methylindeno[1,2-c]pyrazol-4(1H)-one (4e): [image] {#d29e921} {#FPar5}

    Yellow solid; yield 70 %; mp 208--212 °C; FTIR (KBr): νmax 765, 1099, 1394, 1496, 1546, 1598 (C=N stretch), 1710 (C=O stretch), 2850, 2958 (aliphatic C--H stretch), 3089 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 2.44 (3H, s, CH3), 7.36--7.44 (2H, m, Ar-H), 7.49--7.55 (2H, m, Ar-H), 7.76 (1H, d, J = 8.64 Hz, Ar-H), 7.88 (1H, d, J = 8.64 Hz, Ar-H), 8.47 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 29.63 (CH3), 118.31, 121.50, 123.14, 123.86, 124.22, 124.39, 129.99, 130.22, 130.40, 130.77, 132.35, 133.54, 134.13, 141.53, 148.88, 150.21, 164.01, 184.72 (C-4); HRMS: m/z (M^+^) Cacld. for C18H10BrN3OS: 394.9728, found: 395.9782 [M+H]^+^.

    1-(Benzo[d]thiazol-2-yl)-3-isopropylindeno[1,2-c]pyrazol-4(1H)-one (4f): [image] {#d29e990} {#FPar6}

    Yellow solid; yield 67%; 200--202 °C; FTIR (KBr): νmax 756, 1039, 1398, 1502, 1548, 1598 (C=N stretch), 1701 (C=O stretch), 2929, 2972 (aliphatic C--H stretch), 3057 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.42 (6H, d, J= 6.96 Hz, --CH([CH]{.ul}[3]{.ul})2, 3.08--3.15 (1H, m,--[CH]{.ul}(CH3)2), 7.35--7.43 (2H, m, Ar-H), 7.50--7.55 (2H, m, Ar-H), 7.60 (1H, d, J = 7.24 Hz, Ar-H), 7.87 (1H, d, J= 7.52 Hz, Ar-H), 8.03 (1H, d, J = 8.12 Hz, Ar-H), 8.56 (1H, d, J = 7.44 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.19 (--CH([CH]{.ul}3)2), 28.15 (--[CH]{.ul}(CH3)2), 121.66, 122.81, 122.90, 124.25, 124.44, 125.38, 126.70, 130.66, 132.81, 133.38, 133.52, 139.20, 140.13, 150.99, 159.36, 159.52, 183.85 (C-4); HRMS: m/z (M^+^) Calcd. for C20H15N3OS: 345.0936, found: 346.1030 [M+H]^+^.

    3-Isopropyl-1-(6-methylbenzo[d]thiazol-2-yl)indeno[1,2-c]pyrazol-4(1H)-one (4g): [image] {#d29e1100} {#FPar7}

    Yellow solid; yield 67%; mp 170--174 °C; FTIR (KBr): νmax 759, 1055, 1381, 1502, 1548, 1602 (C=N stretch), 1708 (C=O stretch), 2848, 2966 (aliphatic C--H stretch), 3061 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.42 (6H, d, J= 6.92 Hz, --CH([CH]{.ul}3)2, 2.51 (3H, s, CH3), 3.08--3.14 (1H, m, --[CH]{.ul}(CH3)2), 7.32--7.37 (2H, m, Ar-H), 7.50 (1H, t, J = 7.64 Hz, Ar-H), 7.59 (1H, d, J = 6.96 Hz, Ar-H), 7.65 (1H, s, Ar-H), 7.90 (1H, d, J = 8.28 Hz, Ar-H), 8.53 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.21 (--CH([CH]{.ul}3)2), 28.16 (--[CH]{.ul}(CH3)2), 29.71 (CH3), 121.44, 122.35, 122.77, 124.21, 124.43, 128.19, 128.98, 130.58, 132.86, 133.48, 135.63, 140.19, 148.98, 158.62, 159.12, 159.23, 183.84 (C-4); HRMS: m/z (M^+^) Calcd. for C21H17N3OS: 359.1092, found: 360.1158 [M+H]^+^.

    3-Isopropyl-1-(6-methoxybenzo[d]thiazol-2-yl)indeno[1,2-c]pyrazol-4(1H)-one (4h): [image] {#d29e1213} {#FPar8}

    Yellow solid; yield 65%; mp 212--214 °C; FTIR (KBr): νmax 759, 1089, 1398, 1504, 1550, 1608 (C=N stretch), 1703 (C=O stretch), 2837, 2962 (aliphatic C--H stretch), 3078 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.42 (6H, d, J= 6.92 Hz, --CH([CH]{.ul}3)2, 3.07--3.14 (1H, m,--[CH]{.ul}(CH3)2), 3.90 (3H, s, OCH3), 7.11 (1H, dd, J = 2.36, J = 8.92 Hz, Ar-H), 7.32--7.37 (2H, m, Ar-H), 7.50 (1H, t, J = 7.56 Hz, Ar-H), 7.59 (1H, d, J = 7.24 Hz, Ar-H), 7.90 (1H, d, J = 8.92 Hz, Ar-H), 8.50 (1H, d, J = 7.44 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.22 (--CH([CH]{.ul}3)2), 28.14 (--[CH]{.ul}(CH3)2), 55.94 (OCH3), 104.51, 115.71, 122.63, 123.38, 124.21, 124.33, 130.56, 132.83, 133.45, 134.72, 140.20, 145.19, 157.21, 157.91, 158.85, 159.17, 183.83 (C-4); HRMS: m/z (M^+^) Calcd. for C21H17N3O2S: 375.1041, found: 376.1103 [M+H]^+^.

    1-(6-Chlorobenzo[d]thiazol-2-yl)-3-isopropylindeno[1,2-c]pyrazol-4(1H)-one (4i): [image] {#d29e1335} {#FPar9}

    Yellow solid; yield 70%; mp 182--184 °C; FTIR (KBr): νmax 763, 1109, 1381, 1500, 1544, 1597 (C=N stretch), 1703 (C=O stretch), 2870, 2964 (aliphatic C--H stretch), 3086 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.42 (6H, d, J= 6.92 Hz, --CH([CH]{.ul}3)2, 3.07--3.14 (1H, m, --[CH]{.ul}(CH3)2), 7.36 (1H, t, J = 7.48 Hz, Ar-H), 7.45--7.51 (2H, m, Ar-H), 7.59 (1H, d, J = 7.20 Hz, Ar-H), 7.82 (1H, d, J = 1.64 Hz, Ar-H), 7.91 (1H, d, J = 8.68 Hz, Ar-H), 8.46 (1H, d, J = 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.13 (--CH([CH]{.ul}3)2), 28.12 (--[CH]{.ul}(CH3)2), 121.29, 123.06, 123.49, 124.30, 127.46, 130.73, 131.17, 132.61, 133.47, 134.53, 140.01, 149.51, 159.30, 159.48, 159.80, 183.67 (C-4); HRMS: m/z (M^+^) Calcd. for C20H14ClN3OS: 379.0546, found: 380.0605 [M+H]^+^.

    1-(6-Bromobenzo[d]thiazol-2-yl)-3-isopropylindeno[1,2-c]pyrazol-4(1H)-one (4j): [image] {#d29e1446} {#FPar10}

    Yellow solid; yield 65%; mp 190--194 °C; FTIR (KBr): νmax 738, 1078, 1390, 1502, 1539, 1593 (C=N stretch), 1707 (C=O stretch), 2870, 2960 (aliphatic C--H stretch), 3062 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.41 (6H, d, J= 6.92 Hz, --CH([CH]{.ul}3)2, 3.07--3.14 (1H, m,--[CH]{.ul}(CH3)2), 7.37 (1H, t, J = 7.44 Hz, Ar-H), 7.51 (1H, t, J = 7.56 Hz, Ar-H), 7.59--7.64 (2H, m, Ar-H), 7.88 (1H, d, J = 8.64 Hz, Ar-H), 8.00 (1H, d, J = 1.76 Hz, Ar-H), 8.48 (1H, d, J = 7.28 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.15 (--CH([CH]{.ul}3)2), 28.14 (--[CH]{.ul}(CH3)2), 118.70, 123.11, 123.90, 124.23, 124.34, 130.22, 130.79, 132.63, 133.53, 134.99, 140.02, 144.69, 149.89, 159.39, 159.55, 159.83, 183.74 (C-4); HRMS: m/z (M^+^) Calcd. for C20H14BrN3OS: 423.0041, found: 424.0100 [M+H]^+^.

    1-(benzo[d]thiazol-2-yl)-3-isobutylindeno[1,2-c]pyrazol-4(1H)-one (4k): [image] {#d29e1556} {#FPar11}

    Yellow solid; yield 57%; mp 222--226 °C; FTIR (KBr): νmax 761, 1091, 1390, 1494, 1556, 1597 (C=N stretch), 1705 (C=O stretch), 2873, 2958 (aliphatic C--H stretch), 3066 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.01 (6H, d, J = 6.60 Hz, --CH2CH([CH]{.ul}3)2), 2.26--2.33 (1H, m, --CH2[CH]{.ul}(CH3)2), 2.66 (2H, d, J = 7.28 Hz, --[CH]{.ul}2CH(CH3)2), 7.34--7.43 (2H, m, Ar-H), 7.50--7.55 (2H, m, Ar-H), 7.59 (1H, d, J = 7.20 Hz, Ar-H), 7.87 (1H, d, J = 8.00 Hz, Ar-H), 8.03 (1H, d, J= 8.12 Hz, Ar-H), 8.55 (1H, d, J= 7.44 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 22.43 (--CH2CH([CH]{.ul}3)2), 27.79 (--CH2[CH]{.ul}(CH3)2), 36.32 (--[CH]{.ul}2CH(CH3)2), 121.63, 122.79, 123.98, 124.24, 124.43, 125.39, 126.69, 130.62, 132.67, 133.34, 133.53, 140.13, 148.32, 150.93, 152.78, 158.81, 184.14 (C-4); HRMS: m/z (M^+^) Calcd. for C21H17N3OS: 359.1092, found: 360.1155 [M+H]^+^.

    3-Isobutyl-1-(6-methylbenzo[d]thiazol-2-yl)indeno[1,2-c]pyrazol-4(1H)-one (4l): [image] {#d29e1702} {#FPar12}

    Yellow solid; yield 54%; mp 186--190 °C; FTIR (KBr): νmax 773, 1134, 1444, 1465, 1562, 1602 (C=N stretch), 1693 (C=O stretch), 2868, 2953 (aliphatic C--H stretch), 3064 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ= 1.00 (6H, d, J = 6.60 Hz, --CH2CH([CH]{.ul}3)2), 1.96--2.02 (1H, m, --CH2[CH]{.ul}(CH3)2), 2.41 (3H, s, [CH]{.ul}3), 2.78 (2H, d, J = 7.44 Hz, --[CH]{.ul}2CH(CH3)2), 7.31--7.40 (2H, m, Ar-H), 7.45--7.51 (2H, m, Ar-H), 7.77 (1H, t, J = 8.00 Hz, Ar-H), 8.02 (1H, d, J = 7.56 Hz, Ar-H), 8.40 (1H, d, J= 9.28 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 21.44 (--CH2CH([CH]{.ul}3)2), 22.31 (CH3), 28.00 (--CH2[CH]{.ul}(CH3)2), 37.09 (-CH2CH(CH3)2), 119.77, 120.95, 121.95, 123.88, 125.12, 127.58, 128.98, 130.64, 132.01, 139.18, 140.27, 148.66, 150.06, 151.58, 154.85, 159.83, 182.64 (C-4); HRMS: m/z (M^+^) Calcd. for C22H19N3OS: 373.1249, found: 374.1309 [M+H]^+^.

    3-Isobutyl-1-(6-methoxybenzo[d]thiazol-2-yl)indeno[1,2-c]pyrazol-4(1H)-one (4m): [image] {#d29e1849} {#FPar13}

    Yellow solid; yield: 56%; mp 158--160 °C; FTIR (KBr): νmax 759, 1089, 1390, 1496, 1550, 1605 (C=N stretch), 1705 (C=O stretch), 2868, 2956 (aliphatic C--H stretch), 3061 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.02 (6H, d, J = 6.6 Hz, --CH2CH([CH]{.ul}3)2), 2.26--2.33(1H, m, --CH2[CH]{.ul}(CH3)2), 2.66 (2H, d, J = 7.28 Hz, --[CH]{.ul}2CH(CH3)2), 3.91 (3H, s, OCH3), 7.12 (1H, dd, J = 2.28, 6.60 Hz, Ar-H), 7.32--7.37 (2H, m, Ar-H), 7.51(1H, t, J = 7.48Hz, Ar-H), 7.59 (1H, d, J = 7.24 Hz, Ar-H), 7.91 (1H, d, J = 8.92 Hz, Ar-H), 8.50 (1H, d, J= 7.48 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 22.52 (--CH2CH([CH]{.ul}3)2), 29.74 (--CH2[CH]{.ul}(CH3)2), 36.41 (--[CH]{.ul}2CH(CH3)2), 55.94 (OCH3), 104.56, 115.82, 123.45, 123.83, 124.28, 124.41, 127.13, 130.61, 132.79, 133.55, 134.79, 136.96, 140.30, 145.23, 150.48, 152.66, 158.00, 184.23 (C-4); HRMS: m/z (M^+^) Calcd. for C22H19N3O2S: 389.1198, found: 390.1258 [M+H]^+^.

    1-(6-Chlorobenzo[d]thiazol-2-yl)-3-isobutylindeno[1,2-c]pyrazol-4(1H)-one (4n): [image] {#d29e2005} {#FPar14}

    Yellow solid; yield: 49%; mp 140--142 °C; FTIR (KBr): νmax 775, 1109, 1388, 1494, 1537, 1593 (C=N stretch), 1708 (C=O stretch), 2870, 2962 (aliphatic C--H stretch), 3088 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.02 (6H, d, J = 6.60 Hz, --CH2CH([CH]{.ul}3)2), 2.26--2.33 (1H, m, --CH2[CH]{.ul}(CH3)2), 2.66 (2H, d, J = 7.32 Hz, --[CH]{.ul}2CH(CH3)2), 7.35--7.45 (2H, m, Ar-H), 7.70 (1H, t, J = 7.40 Hz, Ar-H), 7.80--7.85 (2H, m, Ar-H), 7.95 (1H, d, J = 8.68 Hz, Ar-H), 8.49 (1H, d, J= 7.48 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 22.47 (--CH2CH([CH]{.ul}3)2), 27.82 (--CH2[CH]{.ul}(CH3)2), 36.34 (--[CH]{.ul}2CH(CH3)2), 120.97, 121.36, 121.49, 123.57, 124.37, 124.47, 127.28, 127.54, 130.78, 133.58, 140.09, 149.54, 151.28, 152.08, 153.03, 158.93, 185.16 (C-4); HRMS: m/z (M^+^) Calcd. for C21H16ClN3OS: 393.0703, found: 394.0763 [M+H]^+^.

    1-(6-Bromobenzo[d]thiazol-2-yl)-3-isobutylindeno[1,2-c]pyrazol-4(1H)-one (4o):[image] {#d29e2145} {#FPar15}

    Yellow solid; yield 78%; mp 168--170 °C; FTIR (KBr): νmax 763, 1097, 1392, 1494, 1537, 1593 (C=N stretch), 1707 (C=O stretch), 2870, 2960 (aliphatic C--H stretch), 3088 (aromatic C--H stretch) cm^−1^; ^1^H NMR (400 MHz, CDCl3): δ = 1.02 (6H, d, J = 6.64 Hz, --CH2CH([CH]{.ul}3)2), 2.25--2.35 (1H, m, --CH2[CH]{.ul}(CH3)2), 2.66 (2H, d, J = 7.28 Hz, --[CH]{.ul}2CH(CH3)2), 7.36--7.45 (2H, m, Ar-H), 7.50-- 7.58 (2H, m, Ar-H), 7.76 (1H, d, J = 8.64 Hz, Ar-H), 7.89 (1H, d, J = 8.64 Hz, Ar-H), 8.49 (1H, d, J= 7.40 Hz, 8-H); ^13^C NMR (100 MHz, CDCl3): δ = 22.47 (--CH2CH([CH]{.ul}3)2), 27.81 (--CH2[CH]{.ul}(CH3)2), 36.34 (--[CH]{.ul}2CH(CH3)2), 121.49, 123.85, 123.92, 124.24, 124.37, 124.47, 130.00, 130.46, 132.55, 133.57, 134.15, 140.09, 149.88, 150.21, 153.04, 159.80, 184.05 (C-4); HRMS: m/z (M^+^) Calcd. for C21H16BrN3OS: 437.0197, found: 438.0257 [M+H]^+^.

    Biological studies {#Sec8}

    Enzyme assay {#Sec9}

    In vitro *α-*glucosidase inhibition {#Sec10}

    McCue's protocol was followed for evaluation of in vitro α-glucosidase inhibitory activity, with some modifications (McCue et al. [@CR23]). The present activity was carried by using α-glucosidase enzyme (Saccharomyces cereviciae). A solution of the enzyme was obtained by adding 20 μL α-glucosidase (0.5 unit/mL) in 120 μL of 0.1 M phosphate buffer (pH 6.9). In microplate wells, the enzyme solution was mixed with 10 μL of each test samples which, in turn, were prepared by dissolving in dimethylsulphoxide (DMSO) at various concentrations i.e. 12.5, 25, 50, 100 μg/mL and incubated for 15 min at 37 °C. Thereafter, this was charged with 20 μL of substrate solution to 5 mM p-nitrophenyl-α-D-glucopyranoside in 0.1 M phosphate buffer (pH 6.9) and further incubated for 15 min. A solution of 0.2 M sodium carbonate (80 μL) was added to terminate the reaction, and absorbance was measured at λ = 405 nm on ELISA microplate reader. The reaction system without test samples (4a--o) was used as control while the system without α-glucosidase was used as a blank, and Acarbose was used as positive control. Each experiment was performed in triplicate. The enzyme inhibitory rates of samples have been expressed as percentage (%) inhibition which is determined by Eq. (1{ref-type=""}) as follows:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}% ,{\mathrm{Inhibition = }}\left( {\frac{{{\mathrm{Control}},{\mathrm{Absorption - Sample}},{\mathrm{Absorption}}}}{{{\mathrm{Control}},{\mathrm{Absorption}}}}} \right) \times 100\end{document}

    The IC50 values of compounds 4a--o were calculated.

    In vitro α-amylase inhibition {#Sec11}

    The protocol reported by Xiao et al. and Yoshikawa et al. with slight modifications was utilized for the evaluation of in vitro α-amylase inhibition activity (Xiao et al. [@CR44]; Yoshikawa et al. [@CR46]). Stock solutions of compounds 4a--o were prepared by dissolving the compound (5 mg) in DMSO (5 mL) at room temperature. The α-amylase inhibitory activity was examined at different concentrations of each sample i.e., 12.5, 25, 50, and 100 μg/mL. The reagent solution without the test sample was used as the control and Acarbose was used as standard reference. Substrate solution was prepared by dissolving soluble starch (500 mg) in 0.4 M NaOH (25 mL) and heated for 5 min at 100 °C. After cooling in ice cold water, the pH of the solution was achieved to 7 by adding 2 M HCl, and water was added to make the volume to 100 mL. The sample (20 μL) and substrate (40 μL) solutions were mixed in a microplate well and the mixture in each case was preincubated at 37 °C for 3 min. Thereafter, 20 μL of α-amylase solution (50 μg/mL) was added to each well, and the microplate was incubated for 15 min. The reaction was terminated by adding 0.1 M HCl (80 μL). Then 1 mM iodine solution (200 μL) was added to the reaction mixture and absorbance was measured at λ = 650 nm with ELISA microplate reader. The enzyme inhibitory activity expressed as percentage (%) inhibition was calculated by Eq. (2{ref-type=""}) as follows:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}% ,{\mathrm{Inhibition}} = \left{ {1 - \left( {Abs2 - Abs1} \right)/\left( {Abs4 - Abs3} \right) \times 100} \right}\end{document}where, Abs1 = Absorbance of incubated solution containing test sample, starch and amylase, Abs2 = Absorbance of incubated solution containing test sample and starch, Abs3 = Absorbance of incubated solution containing starch and amylase, and Abs4 = Absorbance of incubated solution containing starch.

    In vitro antimicrobial assay {#Sec12}

    Test microorganism {#Sec13}

    Two Gram-positive bacteria viz. B. subtilis (NCIM 20630) and S. aureus (NCIM 5021), and two Gram-negative bacteria viz. E. coli (MTCC 723) and P. aeruginosa (MTCC 7093), and one fungal strain viz. A. niger (MTCC 9933) were used for antimicrobial assay. All the bacterial cultures were obtained from Microbial Type Culture Collection (MTCC), Institute of Microbial Technology (IMTECH), Chandigarh, India. The nutrient broth utilized for the cultivation of microorganisms was procured from HiMedia Laboratories Pvt. Ltd., Mumbai, India.

    Antibacterial evaluation {#Sec14}

    All the synthesized compounds 4a‒o were screened for their antibacterial activity using agar well diffusion method (Okeke et al. [@CR31]). The test microorganisms were enthused by inoculation in 25 mL of nutrient broth (peptone 5 g/L, sodium chloride 5 g/L, HM peptone 1.5 g/L, yeast extract 1.5 g/L, pH = 7.4 ± 0.2). The media was solidified and the test bacterial strains were cultivated by pour plate method on nutrient agar plates. Wells were bored in the seeded agar plates by using sterile cork borer of 8 mm diameter and these were loaded with a 100 μL of each synthesized compound reconstituted in DMSO. All the plates were incubated at 37 °C for 24 h. The diameter of inhibition zone of the test organisms was measured by using Digital Colony Counter (Lab and Life Instruments Pvt. Ltd., India) and reported in mm. Sterile DMSO was used as a negative control, whereas Streptomycin was used as a positive control. The experiments were performed in triplicates and the mean values are reported.

    Antifungal evaluation {#Sec15}

    Antifungal activity of the title compounds 4a‒o was examined against A. niger by a quantitative microspectrophotometric assay (Broekaert et al. [@CR6]) in 96-well microplates. The growth inhibition was observed at 595 nm. Initially, the fungus was grown on potato dextrose broth (PDB) (Potatoes, infusion form = 200 g/L, Dextrose = 20 g/L, pH = 5.1 ± 0.2 at 25 °C) at 27 °C for 7 days. The spores of the fungus were collected from culture on broth plates. The sporangial suspension concentration was measured by hemocytometer and made to 1.7 × 10^5^ spores/mL and the fungal spore suspension was stored at −40 °C. The PDB-fungal spore suspension solution was prepared by mixing PDB (25 mL) with 0.147 ml of the fungal spore suspension solution. Experiment was performed with 100 μL of each of the compounds 4a‒o to be assayed and 100 μL of PDB-fungal spore suspension solution. DMSO was used as a negative control and Fluconazole was used as a positive control. After incubation at 27 °C for 48 h, growth was observed by measuring absorbance at 595 nm on ELISA plate reader. Growth inhibition was reported by using Eq. (3{ref-type=""}) given as follows:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}% ,{\mathrm{inhibition = }}\left( {\frac{{{\mathrm{A}}{{\mathrm{control}}} - {\mathrm{A}}{{\mathrm{sample}}}}}{{{\mathrm{A}}_{{\mathrm{control}}}}}} \right) \times 100\end{document}where Acontrol is the absorbance of the control and Asample is the absorbance of the tested microculture.

    Experimental protocol of molecular docking study {#Sec16}

    Molecular docking analysis was performed using Autodock Vina in Autodock tools (Trott and Olson [@CR41]). For α-glucosidase (PDB ID: 5NN5), the coordinates of center of grid box were center_x = −16.224, center_y = −35.668 and center_z = 95.439, the size of grid box was x_size = 24 Å, y_size = 24 Å and z_size = 24 Å, and the exhaustiveness was equal to 40. For α-amylase (PDB ID: 2QV4), the coordinates of center of grid box were center_x = 20.074, center_y = 46.866 and center_z = 29.866, the size of grid box was x_size = 28 Å, y_size = 28 Å and z_size = 28 Å, and the exhaustiveness was equal to 40.

    Results and discussion {#Sec17}

    Chemistry {#Sec18}

    Protocol for the synthesis of some new benzothiazole tethered indeno[1,2-c]pyrazole derivatives (4a--o) is shown in Scheme 1{ref-type="fig"}. The chemistry formerly described was utilized for the synthesis of 2-acyl-(1H)-indene-1,3(2H)-diones (1) (Mor et al. [@CR26]). Benzo[d]thiazol-2-amine/6-substitutedbenzo[d]thiazol-2-amines and 2-hydrazinylbenzo[d]-thiazole/2-hydrazinyl-6-substitutedbenzo[d]thiazoles (2) were synthesized by the method reported earlier (Mor et al. [@CR28]). Condensation of appropriate 1,3-diketones (1) with hydrazines (2), in equimolar quantities, in dry methanol under reflux for 15 min yielded the corresponding benzothiazolyl hydrazones (3) (Mor et al. [@CR29]). The hydrazones (3) thus obtained were subjected to reflux in glacial acetic acid to furnish the target indeno[1,2-c]pyrazol-4-ones (4a--o) in good yields.Scheme 1Synthesis of indeno[1,2-c]pyrazol-4-ones (4a--o)

    Structures of the newly synthesized compounds 4a--o were confirmed by their FT-IR, NMR (^1^H and ^13^C), and mass spectra. Their FT-IR spectra exhibited strong absorption bands at 1585--1608 (C=N) and 1693--1716 (C=O) cm^−1^. The main characteristic feature of ^1^H NMR spectra of derivatives 4a--o is the resonance of a signal appeared as a doublet integrating for one proton in the range of δ 8.03--8.56 ppm, (J = 7.28**--**8.00 Hz), which was safely assigned to 8-H. Downfield shifting of this proton is probably due to anisotropic--diamagnetic effect of lone pair of electrons present on nitrogen/sulfur of benzothiazole moiety, which finds support from the results reported earlier (Mor et al. [@CR26]). The significant feature of ^13^C NMR spectra of compounds 4a--o demonstrated the downfield shifting of signal due to C-4 (carbonyl carbon) which was observed in the region at δ 182.64‒185.16 ppm. However, the remaining protons in ^1^H NMR and carbons in ^13^C NMR spectra displayed signals in the expected regions. Further, the HRMS analysis results were found in consistent with their molecular formulae (vide experimental).

    Biological studies {#Sec19}

    In search of new antidiabetic agents, we recognized primarily various pyrazole derivatives as reported in the literature (Wright et al. [@CR43]). To the best of our knowledge, this is the first report of antidiabetic activity possessed by synthesized indeno[1,2-c]pyrazol-4-ones (4a--o).

    In vitro *α-*glucosidase inhibitory activity {#Sec20}

    All synthesized compounds 4a--o were assessed for their α-glucosidase inhibitory activity against α-glucosidase enzyme (Saccharomyces cerevisiae) at various concentrations ranging from 12.5 to 100 μg/mL following the developed earlier procedure (McCue et al. [@CR23]) by using Acarbose as the standard (Table 1{ref-type="table"}).Table 1In vitro *α-*glucosidase inhibitory activities of indeno[1,2-c]pyrazol-4-ones (4a--o)CompoundsR^1^R^2^% InhibitionIC50 (μg/mL)12.5 (μg/mL)25 (μg/mL)50 (μg/mL)100 (μg/mL)4aCH3H64.0468.6283.8287.269.874bCH3CH361.7571.6876.4177.7110.594cCH3OCH358.6960.1464.8083.6714.264dCH3Cl60.6062.4363.1265.8715.694eCH3Br76.4182.7686.0486.126.714fCH(CH3)2H35.4843.0058.0280.1229.784gCH(CH3)2CH349.4554.3457.5559.0726.764hCH(CH3)2OCH345.6347.0853.5064.5031.664iCH(CH3)2Cl67.0286.2790.4794.528.184jCH(CH3)2Br35.2547.8769.3486.1224.034kCH2CH(CH3)2H55.9468.0168.6271.3013.834lCH2CH(CH3)2CH362.6665.8784.8290.7810.414mCH2CH(CH3)2OCH346.9351.7451.9757.8533.494nCH2CH(CH3)2Cl42.5758.1669.0083.9818.834oCH2CH(CH3)2Br53.5760.9164.5778.4016.03Acarbose‒‒61.9878.8687.6494.069.35

    It is inferred from the data presented in Table 1{ref-type="table"} that all the derivatives exhibited moderate to excellent % inhibition against α-glucosidase enzyme as compared with the standard. Compound 4i was found to be more potent analogue of this series with 67.02, 86.27, 90.47, and 94.52% inhibition when explored at the concentrations of 12.5, 25, 50, and 100 μg/mL, respectively. Similarly, compound 4e exhibited a rise in % inhibition from 76.41 to 82.76% on increasing the concentration from 12.5 to 50 μg/mL in comparison to the standard drug Acarbose. Compound 4l displayed 90.78% inhibition followed by 4a that exhibited 87.26% inhibition at concentration of 100 μg/mL. Among the synthesized indeno[1,2-c]pyrazol-4-ones, 4e and 4i were found to be more active with IC50 values 6.71 and 8.18 μg/mL, respectively (Acarbose IC50 = 9.35 μg/mL). However, the derivatives 4a and 4b exhibited good inhibitory activity with IC50 values 9.87 and 10.59 μg/mL, respectively.

    In vitro α-amylase inhibitory activity {#Sec21}

    The α-amylase inhibitory activity of the synthesized compounds 4a--o was screened following Xiao's procedure (Xiao et al. [@CR44]; Yoshikawa et al. [@CR46]) by using Acarbose as the standard reference (Table 2{ref-type="table"}).Table 2In vitro α-amylase inhibitory activity of indeno[1,2-c]pyrazol-4-ones (4a--o)CompoundsR^1^R^2^% InhibitionIC50 (μg/mL)12.5 (μg/mL)25 (μg/mL)50 (μg/mL)100 (μg/mL)4aCH3H36.4247.1485.0089.2821.234bCH3CH37.1415.7170.7182.1440.464cCH3OCH328.5737.1463.5787.1431.284dCH3Cl22.1450.7172.1485.7126.444eCH3Br37.8559.2873.5786.4219.254fCH(CH3)2H19.2855.0060.0077.1430.614gCH(CH3)2CH315.71431.4241.4258.5768.364hCH(CH3)2OCH322.8536.4265.7172.8535.84iCH(CH3)2Cl57.8567.1473.5792.1411.904jCH(CH3)2Br28.5739.2850.7181.4236.444kCH2CH(CH3)2H16.4231.4266.4277.1437.624lCH2CH(CH3)2CH331.4255.7167.1482.1423.714mCH2CH(CH3)2OCH325.7140.7157.8583.5733.364nCH2CH(CH3)2Cl24.2845.7161.4273.5733.144oCH2CH(CH3)2Br54.2865.7178.5782.1412.83Acarbose‒‒30.7151.4275.7192.1422.87

    The results of the α-amylase inhibitory activity depicted in Table 2{ref-type="table"} revealed that all the tested derivatives 4a--o displayed moderate to high % inhibition. Compounds 4a, 4e, 4i, 4l, and 4o at concentration 12.5 μg/mL, 4e, 4f, 4i, 4l, and 4o at concentration 25 μg/mL, and 4a and 4o at concentration 50 μg/mL were found to be more potent than the standard. Whereas compound 4i displayed inhibition equivalent to the standard drug Acarbose at concentration 100 μg/mL. The analogues 4c and 4j at concentration 12.5 μg/mL, 4a and 4d at concentration 25 μg/mL, 4b, 4d, 4e, and 4i at concentration 50 μg/mL, and 4a and 4c at concentration 100 μg/mL demonstrated comparable inhibitory activity as shown by the standard drug Acarbose. Furthermore, the remaining compounds were found to display lesser inhibitory activity as compared with the standard drug screened at different concentrations. Among the synthesized derivatives, 4a (IC50 = 21.23 μg/mL), 4e (IC50 = 19.25 μg/mL)**, 4i (**IC50 = 11.90 μg/mL), and 4o (IC50 = 12.83 μg/mL) demonstrated higher activity than the standard (Acarbose, IC50 = 22.87 μg/mL). Consequently, 4a, 4e, 4i, and 4o can be considered as a possible antidiabetic agent for further studies.

    Structure activity relationship (SAR) for antidiabetic activity of indeno[1,2-c]pyrazol-4-ones (4a‒o) {#Sec22}

    According to the presented data for antidiabetic activity of indeno[1,2-c]pyrazol-4-ones (4a‒o), the following SARs have been established:Results of antidiabetic activity indicated that the presence of R^1^ = CH3 and R^2^ = H, Br in the synthesized compounds 4a--o has led to increase the antidiabetic activity against *α-*glucosidase enzyme while the derivative 4e containing R^1^ = CH3 and R^2^ = Br has been found to exhibit improved inhibitory activity against α-amylase enzyme.Compound 4i containing R^1^ = i-propyl and R^2^ = Cl has been found to enhance inhibitory activity against both *α-*glucosidase and α-amylase enzymes.Derivative 4l containing R^1^ = i-butyl and R^2^ = CH3 has improved inhibitory activity against *α-*glucosidase, whereas presence of R^1^ = i-butyl and R^2^ = Br in compound 4o had increased inhibitory activity against α-amylase enzyme.

    From these results, it is inferred that the compounds containing R^1^ = CH3 and R^2^ = H, CH3, OCH3, Cl, and Br, are found to display more inhibitory activity against *α-*glucosidase as compared with the remaining derivatives containing R^1^ = i-propyl and i-butyl, and R^2^ = H, CH3, OCH3, Cl, and Br, whereas no such trend was observed against α-amylase inhibitory activity. Overall, we may conclude that there are different structural requirements for a compound to be effective against *α-*glucosidase and α-amylase enzymes. However, no general trend for SAR was established for both *α-*glucosidase and α-amylase enzymes. The above mentioned findings are summarized in Fig. 1{ref-type="fig"}.Fig. 1Structure activity relationship (SAR) for antidiabetic activity of synthesized indeno[1,2-c]pyrazol-4-ones (4a‒o)

    In vitro antibacterial activity {#Sec23}

    All synthesized indeno[1,2-c]pyrazol-4-ones (4a--o) were tested for their in vitro antibacterial activity against Gram-positive (B. subtilis, S. aureus) and Gram-negative (E. coli, P. aeruginosa) bacteria by agar well diffusion method using Streptomycin as the reference drug (Table 3{ref-type="table"}) (Okeke et al. [@CR31]).Table 3In vitro antibacterial activity of indeno[1,2-c]pyrazol-4-ones (4a--o) through agar well diffusion methodCompoundsZone of inhibition/mm (concentration in µg/mL)^a^Gram-positive bacteriaGram-negative bacteriaB. subtilisS. aureusE.coliP. aeruginosa1000500250125Mean ± SD1000500250125Mean ± SD1000500250125Mean ± SD1000500250125Mean ± SD4a1312121112.00 ± 0.81111110910.25 ± 0.95101010909.75 ± 0.501211111011.00 ± 0.814b1412121112.25 ± 1.251211111111.25 ± 0.501211111011.00 ± 0.811413111112.25 ± 1.504c1212111011.25 ± 0.951312121112.00 ± 0.811099909.25 ± 0.501211111011.00 ± 0.814d1312121212.25 ± 0.501110101010.25 ± 0.501212121011.50 ± 1.001111111010.75 ± 0.504e1413131213.00 ± 0.811212111011.25 ± 0.951111111010.75 ± 0.5011−−−11.00 ± 0.004f−−−−−1210101010.50 ± 1.001312121112.00 ± 0.811312121112.00 ± 0.814g1514141213.75 ± 1.251413131213.00 ± 0.81−−−−−11119910.00 ± 1.154h1111111010.75 ± 0.5011−−−11.00 ± 0.001111101010.50 ± 0.57−−−−−4i1211111111.25 ± 0.50121111−11.33 ± 0.571211101010.75 ± 0.95111010910.00 ± 0.814j−−−−−1211111111.25 ± 0.50−−−−−1312111111.75 ± 0.954k1211111111.25 ± 0.50−−−−−1513121213.00 ± 1.411312121112.00 ± 0.814l1614131314.00 ± 1.411411111111.75 ± 1.50101110910.00 ± 0.811513121112.75 ± 1.704m1313121212.50 ± 0.571312121212.25 ± 0.50111110910.25 ± 0.951110101010.25 ± 0.504n1211111111.25 ± 0.501111101010.50 ± 0.571413131213.00 ± 0.81−−−−−4o1212111111.50 ± 0.572114111114.25 ± 4.71121010910.25 ± 1.251411111111.75 ± 1.50Streptomycin2624222123.25 ± 2.213022222023.50 ± 4.432824221823.00 ± 4.162120201719.5 ± 1.73^a^Values including diameter of the well (8 mm) are means of three replicate

    It is revealed from the data presented in Table 3{ref-type="table"} that compound 4l and 4g exhibited the highest activity against B. subtilis, while the derivative 4h demonstrated maximum inhibition zone against S. aureus. Moreover, the analogues 4f and 4j displayed moderate activity against E. coli, while 4g demonstrated activity against P. aeruginosa. On the other hand, some compounds were inactive against the specific bacteria under study. Overall, these results suggest that the synthesized compounds 4a--o exhibit lesser activity against the bacterial strains than standard drug Streptomycin.

    In vitro antifungal activity {#Sec24}

    All synthesized compounds 4a--o were evaluated for their in vitro antifungal activity against A. niger by the quantitative microspectrophotometric assay using Fluconazole as the standard drug (Broekaert et al. [@CR6]) (Table 4{ref-type="table"}).Table 4In vitro antifungal activity of indeno[1,2-c]pyrazol-4-ones (4a--o) against A. niger in terms of % inhibition and IC50 valuesCompounds% InhibitionIC50 (μg/mL)125 (μg/mL)250 (μg/mL)500 (μg/mL)1000 (μg/mL)4a55.2359.9466.7570.6860.254b49.4758.3765.9671.20154.544c49.2154.7160.7367.01130.314d64.1369.8974.3478.2717.584e54.7163.6165.9676.7079.434f69.6374.3480.8984.5514.284g59.6871.9878.7983.7645.704h69.6374.3480.8984.5514.294i64.1373.5678.7981.9325.704j54.9763.3572.7775.6574.134k63.0865.9673.2980.6255.594l51.3057.3259.4267.01100.004m57.3266.2372.2576.9648.974n63.8770.6874.8678.2718.624o72.2576.9679.3182.9805.68Fluconazole74.0885.6089.7392.4012.73

    A perusal of accumulated data from Table 4{ref-type="table"} reveals that all synthesized compounds 4a--o were found to inhibit fungal growth with inhibition ranging from 49.21 to 72.25%, 54.71 to 76.96%, 59.42 to 80.89%, and 67.01 to 84.55% at concentration 125, 250, 500, and 1000 μg/mL, respectively. Derivative 4o was found to be more active with IC50 value of 5.68 μg/mL than the standard (IC50 = 12.73 μg/mL). Compounds 4d, 4f, 4h, and 4n demonstrated comparable activity to standard drug Fluconazole. Overall, these results suggest that the synthesized compounds 4a--o demonstrated good activity at different concentrations against the fungal strain.

    SARs for antimicrobial activity of indeno[1,2-c]pyrazol-4-ones (4a‒o) {#Sec25}

    The SARs approach to the synthesized derivatives 4a--o demonstrated good to moderate inhibitory potential against all the microbial strains under study. Consequently, we may conclude that there are different structural requirements for a compound to be effective against different bacterial and fungal strains. Moreover, no general trend has been established for the SARs for antimicrobial activity.

    Molecular docking analysis {#Sec26}

    Molecular docking analysis of some selected synthesized compounds with enzymes α-glucosidase and *α-*amylase was performed to find out the mechanism of action at the molecular level.

    Molecular docking with α-glucosidase {#Sec27}

    Crystal structure used for α-glucosidase was obtained from protein data bank and the PDB ID for this structure is 5NN5 (Roig-Zamboni et al. [@CR34]). Docking protocol was validated by docking the co-crystallized ligand. In vitro assay showed that compounds 4e and 4i exhibit best *α-*glucosidase inhibitory potential, hence molecular docking analysis was performed using these two compounds. Compound 4e with a docking score of −7.3 showed three pi--pi interactions with amino acid residue PHE-525, TRP-376 (T shaped), and TRP-481 (T shaped) as shown in Fig. 2{ref-type="fig"} and hydrophobic interactions with TRP-481 and PHE-649. Compound 4i with docking score of −8.4 showed interactions very similar to that of 4e i.e., three pi--pi interactions with amino acid residue PHE-525, TRP-376 (T shaped), and TRP-481 (T shaped) as shown in Fig. 3{ref-type="fig"} and further stabilizing interactions are provided by hydrophobic contacts with ASP-282, ALA-555, and PHE-649. Both the compounds were found to bind in similar orientation with a snug fit.Fig. 2Docked pose of compound 4e (green) showing three pi-pi interactions in blue color with amino acid residue PHE-525, TRP-376 (T shaped), and TRP-481 (T shaped) of α-glucosidaseFig. 3Docked pose of compound 4i (grey) inside the active site of α-glucosidase showing three pi-pi interactions in blue color with amino acid residue PHE-525, TRP-376 (T shaped), and TRP-481 (T shaped)

    Molecular docking with α-amylase {#Sec28}

    In vitro results showed that most of the synthesized compounds 4a‒o were stronger inhibitors of α-amylase compared with acarbose. Compounds 4i and 4o showed superior inhibition as compared with the other synthesized compounds. Therefore, 4i and 4o compounds were used for determining the binding pose and interactions responsible for the activity against human pancreatic α-amylase (PDB ID: 2QV4) (Maurus et al. [@CR22]). First docking protocol was validated by performing docking of co-crystallized ligand. Compound 4o with docking score of −8.8 was found to be showing two hydrogen bond interactions with amino acid residues GLN-63 and THR-163, three pi--pi interactions with TRP-59 and hydrophobic contacts with TYR-62, LEU-162, and LEU-165. The binding pose of compound 4o is shown in Fig. 4{ref-type="fig"}. Compound 4i with docking score of −9.3 binds in active site of *α-*amylase with orientation and interactions similar to that of 4o. It is showing one hydrogen bond with GLN-63, one halogen bond with ASP-197, three pi--pi interactions with TRP-59 and hydrophobic contacts with TRP-58 and TYR-62 as shown in Fig. 5{ref-type="fig"}.Fig. 4Docked pose of compound 4o (white) showing two hydrogen bonding interactions (yellow) with GLN-63 and THR-163 and three Pi-Pi interactions (blue) with TRP-59 of α-amylaseFig. 5Docked pose of compound 4i (green) showing one hydrogen bond with GLN 63 (pink), one halogen bond with ASP 197 (violet), and 3 pi-pi interactions with TRP 59 (blue) of α-amylase

    Conclusion {#Sec29}

    In conclusion, the present study describe the synthesis and characterization of heterocyclic frameworks i.e., indeno[1,2-c]pyrazoles (4), and their biological evaluation as inhibitor of α-glucosidase and α-amylase related to Type II diabetes, and antimicrobial activity. The chemistry for the synthesis of indeno[1,2-c]pyrazole (4) involved the reaction of 2-acyl-(1H)-indene-1,3(2H)-diones (1) with 2-hydrazinylbenzo[d]thiazole/2-hydrazinyl-6-substitutedbenzo[d]thiazoles (2) in dry methanol to give benzothiazolyl hydrazones (3), which upon subsequent refluxing in glacial acetic acid afforded the target compounds 4 in good yields. Some of the synthesized compounds exhibited significant in vitro *α-*glucosidase and α-amylase inhibitory activity viz. 4e was found to be more potent with IC50 value 6.71 μg/mL against *α-*glucosidase enzyme and 4i showed good activity with IC50 value 11.90 μg/mL against α-amylase enzyme as compared with reference drug Acarbose (IC50 = 22.87 μg/mL). Moreover, some of the compounds exhibited convincing results for antimicrobial activity, however, with a degree of variation. The antidiabetic activity was found to be more prolific than antimicrobial activity. In vitro α-glucosidase and α-amylase inhibition was further supported by docking studies of compounds 4e, 4i, and 4o. Hopefully, these findings will prove helpful to medicinal chemists for the development of new inhibitors of enzymes related to Type II diabetes.

    Supplementary Information

    {#Sec30}

    Supplementary Information

    Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

    Supplementary information

    The online version of this article (10.1007/s00044-019-02457-8) contains supplementary material, which is available to authorized users.

    The authors are grateful to the Council of Scientific and Industrial Research, New Delhi, India for providing financial support (CSIR No. 09/752(0060)/2016-EMR-I).

    The authors declare that they have no conflict of interest.

  2. Assistant

    The introduction and study presented here involve analyzing a variety of synthesized compounds to determine their biological effects on enzymes related to Type II diabetes and their antimicrobial efficacy. Let's break down the details with System 1 and System 2 thinking:

    [sys1] Overview:

    • Research examines the synthesis and biological activity of heterocyclic indeno[1,2-c]pyrazoles.
    • Compounds are tested for their ability to inhibit α-glucosidase and α-amylase, enzymes associated with Type II diabetes.
    • Antimicrobial efficacy against various bacterial strains and fungi is also assessed.
    • Molecular docking studies support the biological data.

    Key Findings:

    • Compounds like 4e show potent α-glucosidase inhibition.
    • 4i demonstrates strong α-amylase inhibition.
    • Some compounds exhibit notable antimicrobial activity, yet with variations across microbial strains.
    • Molecular docking suggests specific interactions between inhibitors and enzyme active sites. [end sys1]

    [sys2] 2.1 Understand the Problem:

    Objective: Comprehend the challenge of synthesizing compounds that could help manage Type II diabetes and act as antimicrobial agents.

    Reflection: "Type II diabetes requires innovative treatments that can modulate enzyme activity, while antimicrobial resistance demands new effective agents. Are there any interactions between the drugs' mechanisms that could be dual-purpose?"

    Creative Perspective: "Could the structural motifs in these compounds reveal a dual mechanism that aids in both enzyme inhibition and antimicrobial activity?"

    2.2 Analyze the Information:

    Objective: Break down the synthesis and testing of these compounds.

    Reflection: "Are we considering the full scope of structure-activity relationships? Are there overlooked factors related to compound solubility or bioavailability impacting efficacy?"

    Creative Perspective: "Can we find any structural commonalities across both sets of biological activities? Perhaps a shared pharmacophore crucial for both targets?"

    2.3 Generate Hypotheses:

    1. Substituent on pyrazole, especially halogens, enhances enzyme inhibitory activity. (Confidence: 0.7, Creative: 0.6)
    2. Bromine may increase α-glucosidase activity due to specific electronic effects. (Confidence: 0.6, Creative: 0.7)
    3. Compounds with bulky substituents align with active sites, improving inhibition. (Confidence: 0.7, Creative: 0.6)
    4. Structural flexibility might enable dual enzyme inhibition and bacterial membrane disruption. (Confidence: 0.5, Creative: 0.8)
    5. Electron-withdrawing groups enhance binding affinity to enzyme pockets. (Confidence: 0.6, Creative: 0.7)
    6. Bioavailability issues could limit antimicrobial activity in in vitro assays. (Confidence: 0.5, Creative: 0.4)
    7. Specific aryl rings could improve interactions with unique enzyme residues. (Confidence: 0.7, Creative: 0.6)
    8. Hydrogen bonding in docking studies points to potential modification sites for optimized efficacy. (Confidence: 0.8, Creative: 0.7)
    9. Amphiphilic balance essential for transmembrane transport, impacting both activities. (Confidence: 0.5, Creative: 0.8)
    10. Resistance mechanisms might exploit metabolic pathways, reducing microbial inhibition. (Confidence: 0.4, Creative: 0.6)

    Reflection: "Are there patterns or trends within the binding data that could suggest optimized structural elements for increased efficacy?"

    Creative Perspective: "Could similar compound classes be tailored for targeted, dual-purpose therapeutics?"

    2.4 Anticipate Future Steps and Obstacles:

    Objective: Predict next steps for research, like scaling studies or overcoming bioavailability challenges.

    Reflection: "What additional tweaks in molecular structure could enhance both activities? How can we better assess absorption and distribution in vivo?"

    Creative Perspective: "Can integrating molecular modeling with AI reveal novel scaffolds to explore?"

    2.5 Evaluate Hypotheses:

    Objective: Compare hypotheses based on current synthetic methods and biological data.

    Evaluation: Prioritize feasibility of modifying substituents to enhance dual-action, refining docking insights for selective interactions.

    Reflection: "What if the synthesis challenges pose scalability issues? Are these options economically viable?"

    Creative Perspective: "Can emerging technologies, like CRISPR-based sensors or advanced simulations, help bypass current limitations?"

    2.6 Select the Best Hypothesis:

    Objective: Focus on modifying halogen substituents to improve enzyme inhibition.

    Reflection: "How has historical data supported this focus? Could it revolutionize treatment approaches if successful?"

    Creative Perspective: "Explore combinations of pharmacophore elements found in both activities, a hybrid inhibitor model."

    2.7 Implement the Hypothesis:

    Objective: Establish procedures to test compound modifications.

    Reflection: "Is the current laboratory setup adequate? Are collaborative projects plausible to share diverse expertise?"

    Creative Perspective: "Should a skeletal compound be modified via iterative, AI-aided machine learning models?"

    2.8 Monitor and Review Progress:

    Objective: Assess outcomes, streamline synthesis, and test strategies.

    Reflection: "What unexpected results emerged? Do they necessitate reevaluation of current hypotheses?"

    Creative Perspective: "Have new insights surfaced regarding enzyme-substrate dynamics that deepen understanding?"

    2.9 Reflect and Capture Insights:

    Objective: Reflect on scientific progress, potential pitfalls, and innovative routes.

    Reflection: "Has this broadened the frontier in type II diabetes research or antimicrobial resistance?"

    Creative Perspective: "Could these findings inspire interdisciplinary innovations, impacting global health perspectives?" [end sys2]

    [sys1] In summary, synthesized indeno[1,2-c]pyrazoles hold promise in managing Type II diabetes via enzyme inhibition, with certain compounds demonstrating potential as antimicrobial agents. Continued optimization and study of these compounds' interactions on a molecular level will advance their development as therapeutic agents. [end sys1]