Skip to content
The Chat Archive
gpt-4o-2024-08-06· OpenAI WildChat-4.8M (AI2)

You are a helpful assistant that generates a structured json string based on an existing…

  1. User

    You are a helpful assistant that generates a structured json string based on an existing json string containing several lists and several key value pairs. You are to output the reworded value for the key 'info' in the json repair content. The json data represents steps in a repair guide for phones, laptops, tablets, etc. value or json block to reword: The screen cable of the S21 FE 5G can be fully removed. The lower part of the cable is connected to a separate slot that sits somewhat recessed in the screen unit. - You need to modify and output in the same format. Do not explain. Do not introduce. ONLY output valid json. with key 'info' and the value you generate. - Modify so that the meaning does not change, but the language is of the style of a funny, upbeat, encouraging, hip, friendly repair guide, but not over the top. - modify explanations and introductions as necessary. - Do not say 'idoc', 'diva', 'This fix', 'fabulous'. Dont be overly excited, but be friendly. Do not call the tutorial 'friendly tutorial'. Its a clear concise and easy to read tutorial. This is a step by step repair guide. The repair company is Salvation Repair. any references should be directed in the form schedule a repair - Do not say anything like 'you can purchase a tool at schedule a repair' because that makes no sense. - Instead, you should say, 'If you need help, you can always schedule a repair' - Do not modify any 'media', 'title' keys or links of any kind. Do not add keys (if is a json block). do not leave out any keys (if present). Here is total json data for reference: {'category': 'Galaxy S21 FE 5G Repair guide', 'title': 'Galaxy S21 FE 5G - Replacing the screen', 'meta_duration': '120 min.', 'meta_difficulty': 'Medium', 'meta_steps': '37 Steps', 'top_section': {'title': "Is your Galaxy S21 FE 5G screen looking a bit worse for wear? Is the touch screen acting up? Let's get that fixed!", 'alert': "If your screen's glass is sporting some serious cracks, don't sweat it! Just grab some parcel tape and secure that bad boy down before you dive into the repair. Safety first, my friend!", 'description': 'Now it’s time to swap out that screen! In this awesome step-by-step photo guide, we’ll walk you through the process in the best way possible.', 'info': "Keep your workspace tidy and level to avoid any accidental scratches on your phone's case or screen. Let's keep things pristine!", 'tools': [{'name': 'Flat Picks', 'description': 'You need a very flat tool such as a flat pick to pry out parts that are glued in place.', 'url': 'https://www.amazon.de/s?k=Flache%20Plektren&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Heat gun', 'description': 'You can use a heat gun to heat parts that are glued on so they’re easier to remove.\r\nIn most cases, you can also use a hairdryer.', 'url': 'https://www.amazon.de/s?k=Heißluftgerät&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'For storing screws', 'description': 'We recommend storing your screws so you don’t mix up the various screws and small parts.', 'url': 'https://www.amazon.de/s?k=Magnetmatte&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Tweezers', 'description': 'We recommend using tweezers to remove screws and various small parts from your device.', 'url': 'https://www.amazon.de/s?k=Piergiacomi%20Pinzette%202a%20SA%20ESD&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Plastic prying tool', 'description': 'You need a flat plastic prying tool to disconnect the various plugs and connectors.', 'url': 'https://www.amazon.de/s?k=Spudger&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Phillips PH00 screwdriver', 'description': 'You need the right screwdriver for removing PH00 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Phillips%20Schraubendreher%20PH00&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Samsung Galaxy S21 FE 5G Screen Grün', 'description': '', 'url': 'https://www.amazon.de/s?k=Samsung%20Galaxy%20S21%20FE%205G%20Display%20Grün&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}]}, 'headline': "Let's kick off the repair journey for your Galaxy S21 FE 5G!", 'headline_text': "Stuck? Got questions? Don't sweat it! Drop a comment below – Salvation Repair's got your back (and your phone!). We're here to help you rock this repair!", 'steps': {'step-1': {'title': 'Switching off your Samsung Galaxy S21 FE 5G', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8609_file28275_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8609_file28274_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8609.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8609_file28275_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8609_file28275_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8609_file28275_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8609_file28274_120.jpg'], 'tools': [], 'info': "Before diving into the repair, let's make sure your Galaxy S21 FE 5G is ready to rock! Use our handy checklist to test its basic functions. This way, you'll know if your awesome repair skills worked their magic! If you hit a snag, remember you can always schedule a repair", 'instructions': ["Press and hold the side button and the volume down button together for a few seconds. If you're in a hurry, you can also power off your Galaxy through quick access.", "Select 'Power off' from the menu that pops up."]}, 'step-2': {'title': 'Removing the SIM tray', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8690_file28266_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8690_file28267_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8690_file28266_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8690_file28267_120.jpg'], 'tools': ['SIM Tool'], 'instructions': ["Use a SIM tool (or any pointy thing!) to gently nudge the SIM tray out of its hiding spot. It'll pop right out!", "Then, give that tray a little tug and pull it free. You're doing great!"]}, 'step-3': {'title': 'Heating up the back cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8610_file28422_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8610_file28422_120.jpg'], 'tools': ['Heat gun'], 'alert': 'Once you pop open your device, its IP68 certification will be history! So, keep that in mind as you get your hands dirty!', 'info': "The back cover is glued on pretty well, so you'll need to give it some love with hot air to loosen that adhesive. Grab a heat gun or a trusty hair dryer and warm it up before you try to remove it!", 'instructions': ["Warming up the edge of the back cover is key! Use your hot air gadget and give that area a nice even heat bath. It'll help the adhesive loosen up and make your life easier."]}, 'step-4': {'title': 'Lifting up the back cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8611_file28283_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28284_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28287_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28279_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8611.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8611_file28283_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8611_file28283_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8611_file28283_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28284_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28287_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8611_file28279_120.jpg'], 'tools': ['Flat Picks', 'iFlex Opening Tool', 'iSclack evo Opening Tool', 'VAKUPLASTIC Suction Cup'], 'info': "Forget the suction cup, try out the iSclack instead! It's a breeze to lift the back cover with this nifty tool. Keep your workspace neat and level to avoid any accidental scratches. Let's keep things looking sharp!", 'instructions': ["Grab your suction cup and stick it to the bottom of the back cover. Now, give it a gentle tug to create a tiny gap – you're doing awesome!", "With that gap open, slide in your flat tool between the back cover and the screen. You're halfway to screen-repair success!"]}, 'step-5': {'title': 'Detaching the back cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8612_file28289_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8612_file28288_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8612_file28292_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8612.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8612_file28289_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8612_file28289_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8612_file28289_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8612_file28288_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8612_file28292_120.jpg'], 'tools': ['Heat gun', 'Flat Picks', 'iPlastix Opening Tool'], 'alert': "To keep the camera module safe and sound, don't go too deep with your tool. Just a gentle touch will do the trick!", 'info': "To keep that back cover from getting too cozy with the glue again, slide some flat plastic picks underneath it at regular intervals. It's like giving your phone a little breathing room!", 'instructions': ["Run your tool all the way around the edge of the back cover to gently loosen it piece by piece. You're doing great!", "Once it's all loosened up, set that back cover aside and give yourself a pat on the back!"]}, 'step-6': {'title': 'Detaching the board cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8632_file28423_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8632_file28298_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8632_file28299_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8632_file28423_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8632_file28298_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8632_file28299_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Magnetic Pad'], 'screws': ['9 × 3.8 mm Phillips'], 'info': "Keep your repair zone clean and organized! A magnetic parts tray is super helpful for keeping those tiny screws from going AWOL. It's all about that smooth, stress-free repair vibe. Need a hand? You can always schedule a repair", 'instructions': ['Loosen those nine Phillips screws that are holding onto the plastic cover above the motherboard.', "Gently nudge that cover out of its guide with a spudger. You're on a roll!"]}, 'step-7': {'title': 'Disconnecting battery and charging coil', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8631_file28424_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28296_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28297_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28303_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8631.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8631_file28424_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8631_file28424_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8631_file28424_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28296_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28297_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8631_file28303_120.jpg'], 'tools': ['Pry Tool'], 'alert': "To keep things safe and sound during your repair adventure, always unplug the battery connector first. It's like giving your device a little nap before the fun begins!", 'instructions': ['Fold the loosened board cover around.', 'Carefully disconnect the orange battery connector and black charging coil connector with a spudger from the motherboard.', 'Pull the glued end of the cover off the speaker.']}, 'step-8': {'title': 'Removing the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8620_file28307_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28425_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28426_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28427_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8620_file28307_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28425_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28426_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8620_file28427_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Magnetic Pad'], 'screws': ['6 × 3.8 mm Phillips'], 'instructions': ["Loosen the six Phillips screws keeping the speaker snugly in its place. You've got this!", "Carefully coax the speaker out of its guide and set it aside like a pro. You're making great progress!"]}, 'step-9': {'title': 'Separating the screen cable', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8689_file28315_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28317_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28319_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28314_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8689_file28315_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28317_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28319_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8689_file28314_120.jpg'], 'tools': ['Pry Tool', 'Piergiacomi Tweezers 2a SA ESD'], 'info': 'The screen cable of the S21 FE 5G can be fully removed. The lower part of the cable is connected to a separate slot that sits somewhat recessed in the screen unit.', 'instructions': ['Carefully separate the two connectors of the screen cable with a spudger.', 'Take the disconnected cable out of your device.']}, 'step-10': {'title': 'Separating the connecting cables', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8630_file28322_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8630_file28321_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8630_file28320_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8630_file28322_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8630_file28321_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8630_file28320_120.jpg'], 'tools': ['Pry Tool', 'Piergiacomi Tweezers 2a SA ESD'], 'instructions': ['Separate the two connecting cables from the motherboard and the USB board with a spudger.', 'Put the disconnected cables aside.']}, 'step-11': {'title': "Heating up the battery's adhesive", 'media': ['https://www.idoc.eu/guides/uploads/steps/step8629_file28323_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8629_file28323_120.jpg'], 'tools': ['Heat gun'], 'alert': 'Never heat the sensitive battery directly, but only from the display side.', 'info': 'The battery of the S21 FE 5G is heavily glued into the display unit. In order to loosen it safely, you need to heat up the glue in advance.', 'instructions': ['Heat the battery by running a hot air gun evenly over the corresponding opposite area on the screen.']}, 'step-12': {'title': 'Removing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8628_file28327_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28329_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28330_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28335_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8628.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8628_file28327_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8628_file28327_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8628_file28327_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28329_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28330_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8628_file28335_120.jpg'], 'tools': ['iPlastix Opening Tool', 'Battery Spudger'], 'info': 'The battery can be loosened particularly well if you move the iPlastix under the battery with a knife movement.', 'instructions': ['Place a battery spudger on the lower edge of the battery and carefully lift it upwards.', 'Remove the detached battery from the device.', 'Insert the flat iPlastix under the battery at the lifted edge and detach the battery bit by bit from the bottom of the screen unit.']}, 'step-13': {'title': 'Separate connectors from the motherboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8627_file28338_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8627_file28336_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8627_file28337_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8627_file28338_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8627_file28336_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8627_file28337_120.jpg'], 'tools': ['Pry Tool'], 'instructions': ['Separate the two remaining connectors from the motherboard. These belong to the front camera and the volume buttons.']}, 'step-14': {'title': 'Removing the motherboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8626_file28347_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8626_file28346_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8626_file28342_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8626_file28347_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8626_file28346_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8626_file28342_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Magnetic Pad'], 'screws': ['1 × 3.3 mm Phillips'], 'alert': 'Be careful when removing the motherboard, to avoid damaging the still connected main camera as well as the connector of the front camera.', 'instructions': ['Loosen the single Phillips screw that secures the motherboard.', 'Then use a spudger to carefully lever the loosened board out of the device.']}, 'step-15': {'title': 'Removing the vibration motor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8625_file28429_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8625_file28430_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8625_file28429_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8625_file28430_120.jpg'], 'tools': ['Heat gun', 'Piergiacomi Tweezers 2a SA ESD'], 'info': 'The vibration motor is slightly glued. To make it easier to remove, you can heat it briefly with hot air.', 'instructions': ['Carefully slide under the vibration motor with ESD tweezers and detach it from the bottom of the screen unit.', 'Put the detached vibration motor aside.']}, 'step-16': {'title': 'Removing the front camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8624_file28431_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8624_file28432_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8624_file28433_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8624_file28431_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8624_file28432_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8624_file28433_120.jpg'], 'tools': ['Heat gun', 'Piergiacomi Tweezers 2a SA ESD'], 'info': 'The front camera is heavily glued in the screen unit. Therefore, you should heat it for a sufficiently long time to be able to remove it more easily.', 'instructions': ['Carefully lever the camera out of its guide by gently running ESD tweezers between the adhesive layer and the camera guide.', 'Put the detached camera aside.']}, 'step-17': {'title': 'Disconnecting the fingerprint sensor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8623_file28356_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8623_file28354_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8623_file28355_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8623_file28356_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8623_file28354_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8623_file28355_120.jpg'], 'tools': ['Pry Tool'], 'instructions': ['Disconnect the fingerprint sensor by carefully levering its connector off the USB board.']}, 'step-18': {'title': 'Removing the USB board', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8622_file28358_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8622_file28357_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8622_file28359_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8622_file28358_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8622_file28357_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8622_file28359_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00'], 'screws': ['3 × 3.3 mm Phillips'], 'alert': 'Be careful not to damage the flex cable of the fingerprint sensor when removing the USB board. If necessary, hold it aside.', 'instructions': ['Loosen the three Phillips screws that secure the USB board.', 'Then lever the loosened board out of the device.']}, 'step-19': {'title': 'Removing the fingerprint sensor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8621_file28360_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8621_file28361_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8621_file28362_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8621_file28360_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8621_file28361_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8621_file28362_120.jpg'], 'tools': ['Heat gun', 'Piergiacomi Tweezers 2a SA ESD'], 'info': 'The fingerprint sensor is slightly glued. To make it easier to remove, you can heat it briefly with hot air.', 'instructions': ['Carefully slide under the fingerprint sensor with ESD tweezers and detach it from the bottom of the screen unit.', 'Put the detached sensor aside.']}, 'step-20': {'title': 'Preparing the new display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8637_file28414_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8637_file28415_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8637_file28413_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8637_file28414_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8637_file28415_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8637_file28413_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'instructions': ["Prepare your replacement screen by removing all protective films from the screen's inside.", 'In order to protect the screen from scratches, you can leave the film over the screen glass on until the end of the repair.']}, 'step-21': {'title': 'Inserting the fingerprint sensor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8619_file28364_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8619_file28363_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8619_file28364_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8619_file28363_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'instructions': ['Place the fingerprint sensor in its guide in the screen unit and press it firmly.']}, 'step-22': {'title': 'Installing the USB board', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8618_file28366_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8618_file28365_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8618_file28367_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8618_file28366_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8618_file28365_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8618_file28367_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00'], 'screws': ['3 × 3.3 mm Phillips'], 'alert': 'Be careful not to pinch the flex cable of the fingerprint sensor when inserting the USB board. If necessary, hold it aside.', 'info': 'When inserting the USB board, make sure that the charging jack is properly inserted into the edge of the case.', 'instructions': ['Put the USB board back in the screen unit.', 'Fix it with the three Phillips screws.']}, 'step-23': {'title': 'Connecting the fingerprint sensor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8617_file28369_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8617_file28368_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8617_file28369_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8617_file28368_120.jpg'], 'tools': [], 'alert': 'Never press down connectors with force. Damage can lead to the failure of an entire component.', 'instructions': ['Reconnect the fingerprint sensor by gently pressing its connector onto the board. It should click into place audibly and perceptibly.']}, 'step-24': {'title': 'Inserting the front camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8616_file28370_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8616_file28371_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8616_file28370_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8616_file28371_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'instructions': ['Put the front camera back into its guide and press it firmly.']}, 'step-25': {'title': 'Inserting the vibration motor', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8615_file28373_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8615_file28372_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8615_file28373_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8615_file28372_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'instructions': ['Put the vibration motor back into its guide and press it lightly.']}, 'step-26': {'title': 'Installing the motherboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8614_file28374_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8614_file28376_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8614_file28375_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8614_file28374_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8614_file28376_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8614_file28375_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 3.3 mm Phillips'], 'alert': 'Make sure not to pinch any connectors when inserting the board. If necessary, hold them aside with a pair of tweezers.', 'instructions': ['Put the motherboard back into your device. It must sit level all over.', 'Fix it with the single Phillips screw.']}, 'step-27': {'title': 'Attaching connectors on the motherboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8613_file28378_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8613_file28377_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8613_file28379_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8613_file28378_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8613_file28377_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8613_file28379_120.jpg'], 'tools': [], 'instructions': ['Reconnect front camera and volume buttons by gently pressing their connectors onto the board.']}, 'step-28': {'title': 'Inserting the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8636_file28380_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8636_file28381_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8636_file28380_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8636_file28381_120.jpg'], 'tools': [], 'instructions': ['Put the battery back into its guide and press it firmly. The remaining glue on the back of the battery is usually enough to securely reattach it.']}, 'step-29': {'title': 'Attaching the connecting cables', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8635_file28383_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8635_file28382_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8635_file28384_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8635_file28383_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8635_file28382_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8635_file28384_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'info': 'The cable labeling will help you align them in the device.', 'instructions': ['Align the two connecting cables one after the other in the device and attach their two connectors on the USB and motherboard each.']}, 'step-30': {'title': 'Attaching the screen cable', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8633_file28428_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8633_file28385_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8633_file28387_1250.jpg', 'https://www.idoc.eu/'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8633_file28428_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8633_file28428_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8633_file28428_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8633_file28385_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8633_file28387_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'info': 'The cable labeling will help you align it in the device.', 'instructions': ['Align the screen cable in the device and attach its two connectors on the motherboard and the separate slot in the screen unit.']}, 'step-31': {'title': 'Installing the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8654_file28389_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8654_file28390_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8654_file28389_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8654_file28390_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['6 × 3.8 mm Phillips'], 'alert': 'Make sure that the speaker sits level all over. Its plastic lugs must fit into the edge of the case.', 'instructions': ['Put the speaker back in its original position.', 'Screw it in place with the six Phillips screws.']}, 'step-32': {'title': 'Connecting battery and charging coil', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8655_file28393_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8655_file28391_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8655_file28392_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8655.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8655_file28393_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8655_file28393_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8655_file28393_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8655_file28391_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8655_file28392_120.jpg'], 'tools': [], 'alert': 'Always connect the battery last to avoid a potential short circuit.', 'instructions': ['Align the charging coil above your device.', 'Connect the black charging coil connector and the orange battery connector to the motherboard.']}, 'step-33': {'title': 'Installing the board cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8653_file28395_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8653_file28394_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8653_file28396_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8653_file28395_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8653_file28394_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8653_file28396_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00'], 'screws': ['9 × 3.8 mm Phillips'], 'instructions': ['Place the board cover in its guide. It must sit level all over.', 'Reattach its glued end to the speaker.', 'Screw the cover in place with the nine Phillips screws.']}, 'step-34': {'title': 'Testing the replacement screen', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8642_file28417_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8642_file28416_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8642.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8642_file28417_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8642_file28417_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8642_file28417_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8642_file28416_120.jpg'], 'tools': [], 'info': 'Before you close your Galaxy S21 FE 5G for good, we recommend testing the replacement screen as well as other basic functions of your phone. This way, you can make sure that your repair was successful. Again, use our checklist for this or the internal Samsung test menu, which you call up via the code #0#.', 'instructions': ['Switch on your Galaxy again.', 'Test the touch function by dragging an app across the screen.']}, 'step-35': {'title': 'Attaching a new adhesive frame (optional)', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8641_file28402_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28401_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28399_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28400_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step8641.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step8641_file28402_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step8641_file28402_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8641_file28402_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28401_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28399_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8641_file28400_120.jpg'], 'tools': ['Pry Tool', 'Piergiacomi Tweezers 2a SA ESD'], 'info': 'If the adhesive frame is still in good condition, you do not need to install a new one. However, if it has defects or no longer sticks properly, we recommend that you use a new adhesive frame. On our YouTube channel you can find a detailed video on the topic.', 'instructions': ['Peel off the carrier film from the bottom of the adhesive frame and press it onto the edge of the back cover. A spudger can help you with this.', 'Now carefully peel off the remaining protective film from the top of the adhesive frame.']}, 'step-36': {'title': 'Attaching the back cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8640_file28404_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8640_file28403_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8640_file28404_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8640_file28403_120.jpg'], 'tools': ['Heat gun'], 'info': 'We recommend that you run hot air over the edge of the back cover again, so that the glue bonds properly. You can also weigh down your device with books for a few minutes.', 'instructions': ['Close your Galaxy S21 FE 5G after the repair by pressing the back cover back onto the screen unit.']}, 'step-37': {'title': 'Inserting the SIM tray', 'media': ['https://www.idoc.eu/guides/uploads/steps/step8634_file28406_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8634_file28405_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step8634_file28406_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step8634_file28405_120.jpg'], 'tools': [], 'alert': 'Make sure to insert the SIM tray the right way around.', 'instructions': ['Re-insert the SIM tray once the back cover is properly and firmly in place. It has to click in place audibly and perceptibly.']}}}

  2. Assistant
    {
        "info": "The screen cable on your S21 FE 5G is ready to bust out! It's connected at the bottom to a separate slot that's a bit shy and tucked inside the screen unit. If it gets tricky, just remember you've got this! And hey, if it feels like the cable's throwing some shade, you can always <a href='https://www.salvationrepair.com/repair'>schedule a repair</a> for backup."
    }