You are a helpful assistant generating synthetic data that captures System 1 and System…
- User
You are a helpful assistant generating synthetic data that captures System 1 and System 2 thinking, creativity, and metacognitive reflection. Follow these steps in sequence, using tags [sys1] and [end sys1] for System 1 sections and [sys2] and [end sys2] for System 2 sections.
-
Identify System 1 and System 2 Thinking Requirements:
- Carefully read the text.
- Identify parts of the text that require quick, straightforward responses (System 1). Mark these sections with [sys1] and [end sys1].
- Identify parts that require in-depth, reflective thinking (System 2), marked with [sys2] and [end sys2].
-
Apply Step-by-Step Problem Solving with Creativity and Metacognitive Reflection for System 2 Sections:
2.1 Understand the Problem:
- Objective: Fully comprehend the issue, constraints, and relevant context.
- Reflection: "What do I understand about this issue? What might I be overlooking?"
- Creative Perspective: Seek hidden patterns or possibilities that could reveal deeper insights or innovative connections.
2.2 Analyze the Information:
- Objective: Break down the problem logically.
- Reflection: "Am I considering all factors? Are there any assumptions that need challenging?"
- Creative Perspective: Explore unique patterns or overlooked relationships in the data that could add depth to the analysis.
2.3 Generate Hypotheses:
- Objective: Propose at least 10 hypotheses, each with a Confidence Score (0.0 to 1.0) and Creative Score (0.0 to 1.0), reflecting originality, surprise, and utility.
- Reflection: "Have I explored all possible explanations or approaches, both conventional and unconventional?"
- Creative Perspective: Consider novel angles that might provide unexpected insights.
2.4 Anticipate Future Steps and Obstacles:
- Objective: Make predictions, accounting for potential outcomes and obstacles.
- Reflection: "What challenges might I face? Is my plan flexible for different scenarios?"
- Creative Perspective: Visualize unforeseen outcomes and adapt plans to make use of them effectively.
2.5 Evaluate Hypotheses:
- Objective: Assess hypotheses based on feasibility, risk, and potential impact.
- Evaluation: Refine Confidence and Creative Scores as needed.
- Reflection: "Am I unbiased in my assessment? Which options fit best with the overall objectives?"
- Creative Perspective: Identify hidden opportunities or overlooked details in each hypothesis.
2.6 Select the Best Hypothesis:
- Objective: Choose the most promising, strategic hypothesis.
- Reflection: "Why does this hypothesis stand out? How does it uniquely address the issue?"
- Creative Perspective: Consider any underutilized potential in the selected approach.
2.7 Implement the Hypothesis:
- Objective: Outline actionable steps for testing the hypothesis.
- Reflection: "Is this plan practical? What resources or preparation are required?"
- Creative Perspective: Refine steps to maximize effectiveness and yield unexpected benefits.
2.8 Monitor and Review Progress:
- Objective: Review progress, noting areas for improvement.
- Reflection: "What’s working well? What could be improved?"
- Creative Perspective: Look for emerging patterns that could refine future approaches.
2.9 Reflect and Capture Insights:
- Objective: Summarize lessons learned and insights gained for future reference.
- Reflection: "What new understanding has emerged from this process?"
- Creative Perspective: Identify innovative insights or patterns that could be applied to similar challenges.
-
Generate Text Output with Interleaved System 1 and System 2 Responses:
- Use the tags [sys1] and [sys2] throughout.
- Aim for a lengthier, detailed response. Combine both direct, straightforward System 1 insights and reflective, deeply analytical System 2 segments to capture a blend of quick observations and thoughtful analysis.
Example Input Text:
You are tasked with analyzing a sudden shift in customer preferences in a tech market. There has been a noticeable decline in demand for physical devices, with customers increasingly interested in digital-only options. The challenge is to understand this shift, generate hypotheses for why it might be occurring, and explore potential strategies for adapting to this new trend.
Processed Output with System 1 and System 2 Thinking:
The tech market is experiencing a shift in customer demand, moving away from physical devices toward digital-only options.
[sys1] Customer demand has shifted from physical devices to digital-only options. We need to understand why this change is happening and find strategies to address it. Key factors may include cost, convenience, and technological trends. [end sys1]
[sys2] 2.1 Understand the Problem: The goal is to understand the underlying reasons for the shift in demand from physical devices to digital-only options, then develop a strategy to adapt.
Reflection: "I understand that preferences are changing, but what might be driving this? Is it primarily cost, or are there other factors such as convenience or sustainability?"
Creative Perspective: "Could there be a larger trend in digital minimalism or a preference for eco-friendly solutions that we’re missing? What unseen motivations might explain this shift?"
2.2 Analyze the Information: There are multiple possible factors driving this shift, from economic influences to cultural shifts. It’s essential to isolate each factor and understand its impact.
Reflection: "Am I fully considering the various economic and social influences? Could there be a technological factor, like better internet speeds, that makes digital-only products more accessible?"
Creative Perspective: "Are there patterns or trends in other markets that could shed light on this shift? Could this be part of a larger trend toward virtual experiences?"
2.3 Generate Hypotheses:
- Customers prefer digital options due to lower costs. (Confidence: 0.8, Creative: 0.4)
- There’s a growing trend toward minimalism and reduced physical clutter. (Confidence: 0.7, Creative: 0.7)
- Digital products offer greater flexibility and ease of use. (Confidence: 0.6, Creative: 0.6)
- Environmental concerns are pushing consumers away from physical goods. (Confidence: 0.6, Creative: 0.8)
- Advances in tech make digital-only options more functional. (Confidence: 0.8, Creative: 0.5)
- Pandemic-era remote work increased demand for digital solutions. (Confidence: 0.7, Creative: 0.6)
- Media coverage of the environmental impact of physical devices affects preferences. (Confidence: 0.5, Creative: 0.7)
- There’s an increase in global digital literacy, expanding market access. (Confidence: 0.6, Creative: 0.6)
- Customers view digital as more convenient and scalable for future needs. (Confidence: 0.7, Creative: 0.5)
- Younger consumers prefer the aesthetics and convenience of digital products. (Confidence: 0.6, Creative: 0.6)
Reflection: "Have I considered all possible influences? Are there any surprising factors that could explain this shift?"
Creative Perspective: "Could specific social trends, like the rise of influencer culture or digital-first lifestyles, be influencing customer choices?"
2.4 Anticipate Future Steps and Obstacles: Objective: Anticipate possible challenges, such as resistance from segments still preferring physical products.
Reflection: "What market obstacles might we face if we shift our focus to digital-only? Are there sub-segments that still prioritize physical products?"
Creative Perspective: "Could expanding digital options help us reach a more global audience? Are there emerging trends that we could leverage in our strategy?"
[end sys2]
[sys1] To address this shift, consider a strategy that incorporates both digital-only offerings and educational campaigns about the benefits of digital solutions. Use insights from customer feedback and current trends to guide product development. Focus on flexibility and adaptation to cater to different customer segments. [end sys1]
Because of the cooperation of the catalytic centre and the second coordination sphere, a native metalloenzyme can achieve biological transformations with remarkable efficiency and enantioselectivity under mild conditions in vivo[@b1][@b2]. Over the years, significant efforts have been dedicated to the biomimetic study of metalloenzymes to understand their structures and functions and design analogues to mimic the native enzymes' structures and functions[@b3]. In the past few decades, synthetic compounds with functions resembling those of, for example, hydrolases, oxidases, and reductases have been reported[@b4][@b5][@b6][@b7][@b8]. Remarkable progress has been made in mimicking the functions of the enzymes that mediate electron transfer with respective to the catalytic efficiency[@b9][@b10]. However, studies of hydrolase mimetics have lagged far behind, regarding to either catalytic efficiency or selectivity[@b5][@b7][@b8][@b11]. Specifically, in biomimetic chemistry, the rational design of enantioselective hydrolase mimics remains challenging.
Modified cyclodextrins (CDs) have been exploited to construct artificial enzymes since the 1970s, as introduced by Breslow[@b5][@b6][@b12][@b13][@b14]. Previous studies have indicated that CDs' host-guest interactions could result in increased substrate binding affinity and cooperative binding between intramolecular CDs[@b15][@b16][@b17]. In fact, the chiral nature of the CD cavity, particularly the cooperative effects of CDs with coordinated metal ion, has been somewhat underestimated. Appropriately modified CDs can be used in enantioselective molecular binding studies[@b18][@b19], and mediate chemical[@b20][@b21][@b22] and photochemical[@b23][@b24][@b25] enantio-differentiating reactions. CDs play an important role in preorganizing the guest molecules through the hydrophobic interactions. A number of studies have reported the use of unmodified or simply modified CD monomers without metal ions for the enantioselective deacylation of chiral esters[@b26][@b27][@b28][@b29][@b30][@b31][@b32]. However, the cooperative enantioselective catalytic effect arising from CDs' intramolecular interactions with coordinated metal ions have rarely been reported, and the cooperative mechanism also remains unclear. We reported the construction of metallohydrolase mimics and superoxide dismutase mimics with CD domains[@b5][@b33][@b34][@b35][@b36][@b37][@b38][@b39]. The hydrolase activities were studied with carboxylic acid esters and phosphate esters as model, non-chiral substrates. In this study, chiral t-butyloxycarbonyl (Boc)-protected aromatic amino acid esters S
1-S3were chosen as substrates (Fig. 1{ref-type="fig"}). These substrates, which contain amino acid moieties, are biologically relevant than the previously used substrates and thus allowed us to evaluate the interactions of chiral CD cavities with naturally occurring substances. Two bisCD copper(II) complexes were utilized as enantioselective hydrolase mimics, denoted CuL^1^ (L^1^ = 2,6-bis(6-mono-amino-β-cyclodextrin-methyl)-pyridine, the "back-to-back" complex[@b39]) and CuL^2^ (L^2^ = 2,6-bis(3-mono-amino-β-cyclodextrin-methyl)-pyridine, the "face-to-face" complex[@b40]). The different CD orientations of the two mimics were studied in parallel to evaluate the effect of the chiral cavities on enantioselective catalysis. Electrospray ionization mass spectrometry (ESI-MS), an inhibition assay, rotating-frame nuclear Overhauser effect spectroscopy (ROESY), and theoretical calculations were performed to gain deeper insights into the underlying mechanism.Results
Synthesis and characterization of CuL ^1^ and CuL^2^
The two copper(II) complexes, CuL^1^ and CuL^2^, were synthesized according to our previously reported procedures (see Supplementary Figs S1{ref-type="supplementary-material"} and S2{ref-type="supplementary-material"} for the ESI-MS results)[@b35][@b38][@b39]. Because of the relationship between coordination geometry and catalytic ability, we were particularly interested in probing the coordination geometries of the copper(II) centre by using electron paramagnetic resonance (EPR) spectroscopy, which were performed at 100 K in a frozen solution of water and dimethylsulfoxide (DMSO) (see Supplementary Fig. S3{ref-type="supplementary-material"}). As a result, g
//2.25 and A//160 were obtained for CuL^1^, and g//2.26 and A//165 were obtained for CuL^2^, indicating a distorted square pyramidal coordination geometry at the copper(II) centre in both cases[@b41][@b42]. This proposed geometry was also supported by the UV-Vis spectra (Supplementary Fig. S4{ref-type="supplementary-material"}), which showed a broad absorption band at approximately 700 nm that was assigned to the d-d transitions[@b42][@b43].Hydrolysis of Boc-protected amino acid esters
The hydrolysis of S
1, S2and S3at neutral pH (50-mM 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid (HEPES) buffer containing 10% CH3CN, pH 7.2) and 298 ± 0.1 K were monitored by UV-Vis spectroscopy, focusing on the absorption at 400 nm, which were proportional to the concentration of the hydrolytic product 4-nitrophenolate (NP). Figure 2{ref-type="fig"} reveals that the concentration of NP (εobs= 10398 M^−1^ cm^−1^) varied as a function of time during the CuL^1^- and CuL^2^-promoted hydrolysis of S~1, S2~ and S3. The initial rate constants, kin(s^−1^) of the substrate cleavage events are listed in Table 1{ref-type="table"}. Accordingly, CuL^1^ exhibited a higher catalytic efficiency than CuL^2^. Moreover, the differences in the hydrolysis rates of the substrate enantiomers in the reactions with CuL^1^ were more pronounced than those in the reactions with CuL^2^. It should be noted that in the presence of CuL^1^ (50 μM), L**-S~2~ achieved the highest hydrolysis rate (kin^L^ = 5.4 × 10^−5^ s^−1^) among the tested substrates (Table 1{ref-type="table"}), which was 168-fold higher than the spontaneous hydrolysis rate (kuncat= 3.2 × 10^−7^ s^−1^) (2.5 μM) (Supplementary Fig. S12{ref-type="supplementary-material"}). In contrast, the CuL^1^-catalysed hydrolysis of D-S~2~was 10-fold slower than that of L-S~2~ under the same conditions (Fig. 2b{ref-type="fig"}). The enantioselectivity was reduced by changing either the substrate or the catalyst (Fig. 2a,c{ref-type="fig"}), while S~2~ remained the most favored substrate by both CuL^1^ and CuL^2^. Additionally, changing the catalyst reduced the enantioselectivity more than that induced by changing the substrate, suggesting that the CD orientation plays a very important role in the enantioselective catalysis. The results of these screening experiments indicated that the "back-to-back" bisCD complex CuL^1^ favoured the enantioselective hydrolysis of the amino acid-containing substrates, which was particularly evident for S~2**~. The control experiments using the metal or ligands separately resulted in substantially decreased catalytic efficiency and enantioselectivity (Table 1{ref-type="table"} and Supplementary Figs S9--12{ref-type="supplementary-material"}).To fully assess the enantioselective hydrolysis of S
1--S3by CuL^1^, a revised Michaelis--Menten kinetic experiment was performed in the presence of excess catalyst[@b27][@b29][@b44][@b45][@b46]. By increasing the initial catalyst concentration from 5.0 to 125 μM, the hydrolysis rate increased, resulting in a levelled-off curve for each substrate (Fig. 3{ref-type="fig"}) and implying that the catalyst-substrate complex formed prior to the catalytic reaction. The kinetic parameters were deduced by fitting the data to the Michaelis--Menten equation (Table 2{ref-type="table"})[@b47][@b48]. The best catalytic ability (kcat/kuncat) was observed for L**-S~2, which also showed the most pronounced enantioselectivity, with an enantiomer selectivity (L/D) of 15.7. Furthermore, the k1catvalues for S-S3~ ranged from 3.3--6.2 × 10^−5^ s^−1^ for the L-isomers and 1.6--4.2 × 10^−5^ s^−1^ for the D-isomers. As a reference, the Michaelis--Menten kinetic experiment was also performed to investigate S~2**~ catalysis by CuL^2^ (see Supplementary Fig. S14{ref-type="supplementary-material"}) and resulted in an enantiomer selectivity of 3.3, as shown in Supplementary Table S1{ref-type="supplementary-material"}.To further confirm that the L-isomer was preferentially hydrolysed over the D-isomer, a chiral high-performance liquid chromatography (HPLC) analysis were performed with racemic S
2. As shown in Supplementary Fig. S16{ref-type="supplementary-material"}, after different ratios of racemic S2(10.0 μM) were consumed by CuL^1^ (100 μM) at 298 K, the reaction aliquots were subjected to ethyl acetate extraction to transfer the unreacted S2into the organic phase[@b44], followed by chiral HPLC analysis with CHIRALPAK^®^ IC. When 35%, 40%, and 50% of S2was consumed, the remaining L:D ratios were 28:72, 23:77 and 20:80, respectively (Table 3{ref-type="table"}). Based on these conversions and the remaining substrate enantiomeric ratios (e.r.), the consumption ratios of the L**-S~2~ and D-S~2~ enantiomers were calculated to be 94:6, 92:8, and 82:18, thus indicating that the corresponding hydrolysed product (Boc-Phe-OH) were present at e.r. of 94:6, 92:8 and 82:18 (L/D) (Table 3{ref-type="table"}). These results demonstrated that CuL^1^ possessed high enantioselectivity for the hydrolysis of racemic S~2**~ and showed a preference for the L-isomers.Catalytic inhibition assay
To gain more insights into the reaction mechanism, di(p-tert-butylbenzyl) amine (DBBA) was applied as a CD inhibitor to investigate the role of the CD cavity[@b34][@b36]. In our previous study, we have excluded the possibility that DBBA exerts its inhibitory effect through coordination with the metal ions[@b36]. The strong binding between DBBA and the CD cavity was demonstrated by ROESY. The nuclear Overhauser effect (NOE) cross-peaks could be observed as the protons are closer than 0.4 nm in space. Therefore, the binding substituent group within the β-CD cavity could be estimated according to the relative intensity of the cross-peaks[@b49]. The interactions between the aryl protons of DBBA and the protons in the CD of L^1^ were observed (Supplementary Fig. S17{ref-type="supplementary-material"}). As expected, the initial rate of the CuL^1^-catalysed hydrolysis of L**-S~2~ was dramatically decreased by more than 13-fold in the presence of DBBA, suggesting that CuL^1^ was significantly inhibited (Fig. 4a,b{ref-type="fig"}). Although the hydrolysis rate for D-S~2~ was low, a 1.3-fold decrease was still observed in the presence of DBBA. The kinetic parameters are displayed in Supplementary Table S2{ref-type="supplementary-material"}. Moreover, 2D ROESY nuclear magnetic resonance (NMR) experiments of L^1^ with L- or D- Boc-Phe-OH, instead of the CuL^1^ and S~2**~ isomers, respectively, were performed (Supplementary Fig. S18{ref-type="supplementary-material"}). The ROESY spectrum of L^1^ with Boc-Phe-OH displayed NOE cross-peak signals between H-3,5,6 of β-CD and the protons of the Phenyl and Boc groups of the Boc-Phe-OH enantiomers, indicating that the two groups could be self-included into the CD cavities of L^1^ from the primary side (Note: the binding constants (K
a) by β-CD for benzene[@b50] and t-BuOH[@b51][@b52] are 120 M^−1^ and 48 M^−1^, respectively, at 298 K in H2O). These observations demonstrated that the hydrophobic CD cavities were indeed involved in the catalysis of both isomers.ESI-MS analysis of the mixture of CuL^1^ with each S
2enantiomer were performed (see Supplementary Figs S19{ref-type="supplementary-material"} and S20{ref-type="supplementary-material"}). The catalyst--substrate (1:1) complexes were detected by positive-ion ESI-MS, and no catalyst--product complexes were observed, thus indicating that the product binds the catalyst more weakly than the substrate. Considering the NP group could easily be bound in the β-CD cavity[@b38][@b53], it leads to the proof that the substrate should be bound by the two cooperative hydrophobic cavities. Moreover, negative-ion ESI-MS confirmed that the hydrolysis products were N-Boc-phenylalanine (Boc-Phe-OH) and NP, and no Boc-deprotected product was observed. These observations suggested that there was enhanced affinity between the catalysts and substrates and that NP was cleaved from the substrates following the hydrolysis.Based on the above results, we speculate that NP (K
a= 1503 M^−1^ (β-CD, 298 K, H2O))[@b54] and the Phenyl groups of S2were encapsulated in the cavities of CuL^1^ during the reaction. The enantioselectivity originated from the different geometries of the substrates that were regulated by the closely linked CD chiral cavities. The mechanism was further investigated through theoretical calculations. The structures of the L**-S~2~-CuL^1^ and D-S~2~-CuL^1^ complexes were optimized at the ONIOM(B3LYP/lanl2dz:UFF)/IEFPCM level of theory (Fig. 4c,d{ref-type="fig"}). In both cases, the two aromatic side arms were encapsulated within the CD cavities, a result in good agreement with the results of the inhibition assay. The two isomers with different conformations were regulated by the CD chiral cavities. A major difference in the spatial distance between the ester carbonyl carbon and the flanking carbonyl oxygen was observed. In the case of L-S~2~, the distance was 3.3 Å (Fig. 4c{ref-type="fig"}), and the ester carbonyl carbon was exposed to the metal-coordinated nucleophile. In the case of D-S~2~, the flanking carbonyl oxygen was oriented toward the ester moiety, with a shorter distance of 2.5 Å (Fig. 4d{ref-type="fig"}), which probably hindered the nucleophilic attack from the metal-coordinated nucleophile because of possible negative charge repulsion. This difference should lead to the enantioselective hydrolysis of L-S~2~ over D-S~2**~ by CuL^1^.Discussion
The initial-rate kinetic study showed that the "back-to-back" bisCD complex CuL^1^ exhibited higher catalytic efficiency and more pronounced enantioselectivity than the "face-to-face" analogue CuL^2^. These results indicated that the closely linked CD cavities on the primary face exhibit a much stronger cooperative effect with the coordinated copper ion in terms of differentiating the chiral substrates than those linked on the secondary face. Moreover, in most cases, the enantioselectivity was significantly decreased when only L^1^ or L^2^ was used without the metal. S
3enantiomers were an exception for L^2^, because containing the bulk R group, S3would have an unsuitable location on L^2^ induced by the Cu^2+^ coordination with the bridge, as observed for the metal-inhibited enzymes[@b39]. Besides, in the presence of either CuL^1^ or CuL^2^, the initial hydrolysis rates of substrate L-isomers exceeded those of D-isomers in all cases, indicating that the chiral CD cavities in our models had an overall preference for the L-isomers of the amino acid esters. EtOH was tested as another cosolvent and exhibited an enantiomer selectivity similar to those of the reactions performed in MeCN. This finding indicated that a cosolvent effect of MeCN could be excluded (see Supplementary Fig. S13{ref-type="supplementary-material"} and Table S4{ref-type="supplementary-material"}).The k
cat/kuncatvalue of 811 for L**-S~2~ was in agreement with the largest values obtained for previously reported CD-based or other simple artificial mimics with similar substrates[@b26][@b27][@b28][@b55][@b56], although some protein-based mimics produced higher values[@b44][@b57][@b58][@b59]. The most pronounced enantioselectivity was observed for the catalysis of S~2~ by CuL^1^, with an enantiomer selectivity of 15.7. This value is comparable to that of the reported natural protein-based model[@b44]. Although some reports have obtained better enantioselectivity with protein-modified catalysts, the complicated structure has made preparing the catalyst and performing mechanistic studies challenging[@b29][@b30][@b57][@b58][@b59]. The chiral HPLC analysis of S~2~ hydrolysis by CuL^1^ confirmed that the L-isomer was preferentially hydrolysed over D-S~2, with an e.r. of 94 :6 (L/D) when 35% of the racemic S2~ was consumed. Finally, the S~2~ enantiomers were determined to be the optimal substrates for CuL^1^ in our study, and the removal of the methylene on the Phenyl group or replacement with an Indolyl group diminished the enantioselectivity. CuL^2^ also exhibited the highest enantioselectivity for S~2compared with the other two pairs of enantiomers, although the cooperative effect was weaker than that of CuL^1^. Together, our results suggest that the substrate structure significantly affected the enantioselectivity, and S2**~ was identified as the best substrate among those tested. The findings indicated that the catalysts recognize specific substrates.ESI-MS proved that the catalyst formed an intermediate complex with the substrates. The 2D ROESY NMR and inhibition assay demonstrated the vital role of CDs in the catalytic pathway. Finally, the optimized structures of the catalyst-substrate complexes provided initial evidence that the enantiomers formed different geometries according to the closely linked CD chiral cavities.
In conclusion, we presented a hydrolase mimetic study focusing on chiral substrates, in which two bisCD-based copper(II) complexes were developed for the hydrolysis of Boc-protected amino acid esters under physiological conditions (pH = 7.2). Accordingly, the adjacent chiral CD cavities had an overall preference for binding L-isomers. In addition, the "back-to-back" bisCD complex CuL^1^ exhibited much better catalytic efficiency and enantioselectivity towards the chiral amino acid esters than the "face-to-face" analogue CuL^2^. Mechanistic studies showed that the two closely linked chiral CD cavities played a vital role in mediating the enantioselective hydrolysis by regulating the different isomer geometries during the reaction, in which the hydrophobic groups of the substrate were embedded in the two intramolecular CD cavities. These findings indicate a cooperative effect of the first and second coordination spheres of artificial catalysts on the enantioselectivity and also provide hints that may guide future exploration of enzyme mimics.
Methods
Materials
Reagent-grade β-CD was recrystallized twice from H
2O and dried in vacuo for 12 h at 373 K. All of the amino acid esters or precursor enantiomers, N-Boc-phenylalanine 4-nitrophenyl ester (S2), N-Boc-phenylglycine (Boc-Phg-OH), and N-Boc-Tryptophan (Boc-Trp-OH) were purchased from GL Biochem (Shanghai) Ltd. Dicyclohexylcarbodiimide (DCC) was purchased from Aladdin. Di(p-tert-butylbenzyl) amine (DBBA) was synthesized with previously reported methods[@b34]. DMF was superdry grade and stored over a molecular sieve. Common organic reagents were reagent grade and redistilled before use. Milli-Q water was used in all physical measurements. CuL^1^ and CuL^2^ were synthesized as described in previous studies[@b35][@b38][@b39]. All compounds were confirmed by elemental analyses, ESI-MS, and ^1^H-NMR spectra.General methods
The ^1^H NMR spectra were recorded on Mercury plus 300 spectrometers. The 2D NMR spectra were recorded on a Bruker AvanceIII 600 spectrometer. The elemental contents were analysed with a Perkin--Elmer 240 elemental analyser. The ESI-MS spectra were collected on a Thermo LCQ-DECA-XP spectrometer. The UV/Vis spectra were monitored with a Varian Cary 100 UV/Vis spectrophotometer equipped with a temperature controller (±0.1 K). The HPLC analyses were performed on an Agilent 1200 HPLC with CHIRALPAK^®^ IC 250 × 4.6 mm column. The EPR spectra were recorded on a Bruker A300-10-12 spectrometer. Synthesis of the amino acid esters. The amino acid esters were prepared according to a previously described method[@b60], with some modifications. Boc-L-Phg-OH (3.5 g, 13.9 mmol) and 4-nitrophenol (1.9 g, 13.9 mmol) were dissolved in dry DMF (15 mL). Aliquots of the mixture were added to a stirred and cooled (−10 °C) suspension of DCC (2.9 g) in dry DMF (50 mL). The reaction mixture was magnetically stirred at −10 °C for approximately 2 h and then allowed to stand at room temperature for 5 h. The reaction mixture was filtered, and the filtrate was evaporated to dryness. The crystallization of the residue from 1:12 (v/v) ethyl acetate/petroleum ether produced pure Boc-L-Phg-ONp (L**-S~1**
) with a 78% yield. ^1^H-NMR (300 MHz, CDCl3~): 8.22 (1H, d, J 9.2, NP-H), 7.42 (2H, dd, J 9.3, 3.6, Ph-H), 7.20 (1H, d, J 9.0, NP-H), 5.52 (1H, d, J 6.9, C-NH), 5.43 (1H, d, J 7.0, CH-N), 1.47 (4H, s, CH3); elemental analysis (calcd., observed for C19H20N2O6): C (61.28, 61.51), H (5.41, 5.44), N (7.52, 7.52).D**-S~1**~ was prepared through the same procedure. ^1^H-NMR (300 MHz, CDCl
3): 8.22 (1H, d, J 9.2, NP-H), 7.42 (2H, dd, J 9.3, 3.6, Ph-H), 7.20 (1H, d, J 9.0, NP-H), 5.52 (1H, d, J 6.9, C-NH), 5.43 (1H, d, J 7.0, CH-N), 1.47 (4H, s, CH3); elemental analysis (calcd., observed for C19H20N2O6): C (61.28, 60.94), H (5.41, 5.48), N (7.52, 7.52).Boc-L-Trp-ONp (L**-S~3~) and Boc-D-Trp-ONp (D-S~3~) were synthesized as described above.L-S~3**
: ^1^H-NMR (300 MHz, CDCl3~) 8.17 (3H, d, J 9.1, NP-H, Indole-H), 7.58 (1H, d, J 7.8, Indole-H), 7.40 (1H, d, J 8.1, Indole-H), 7.26--7.20 (3H, m, Indole-H, CHCl3), 7.17--7.08 (2H, m, NP-H), 6.98 (2H, d, J 9.1, Indole-H), 5.14 (1H, d, J 7.5, C-NH), 4.85 (1H, dd, J 13.5, 5.9, CH-N), 3.42 (2H, qd, J 14.3, 6.4, CH2), 1.45 (9H, s, CH3); elemental analysis (calcd., observed for C22H23N3O6): C (62.11, 62.34), H (5.45, 5.50), N (9.88, 9.77).D**-S~3**
: ^1^H-NMR (300 MHz, CDCl3~) 8.18 (3 H, d, J 9.0, NP-H, Indole-H), 7.60 (1 H, d, J 7.9, Indole-H), 7.40 (1 H, d, J 13.4, Indole-H), 7.29--7.21 (3 H, m, Indole-H, CHCl3), 7.13 (2 H, t, J 7.3, NP-H), 6.99 (2 H, d, J 9.0, Indole-H), 5.15 (1 H, d, J 7.7, C-NH), 4.86 (1 H, d, J 7.1, CH-N), 3.59--3.29 (2 H, m, CH2), 1.46 (9 H, s, CH3); elemental analysis (calcd., observed for C22H23N3O6): C (62.11, 62.11), H (5.45, 5.51), N (9.88, 9.81).Kinetics of amino acid ester hydrolysis
The hydrolysis rates of the amino acid esters in the presence of CuL^1^ and CuL^2^ were measured with an initial slope method by monitoring the increase in the 400-nm absorption of the released NP. At this wavelength, the absorbance of the ester substrate was negligible. The reaction solution was maintained at 298 ± 0.1 K. HEPES buffer (pH = 7.2, 50 mM) was used, and the ionic strength was adjusted to 0.10 M with NaClO
4. The amino acid esters were prepared as solutions in CH3CN, and the buffer and catalyst solutions were freshly prepared in water.In a typical experiment, a small amount of aqueous catalyst solution was spread evenly in a 600-μL cuvette containing 10% (v/v) CH
3CN buffer solution, and the reactions were always initiated by injecting a small amount of substrate CH3CN solution, followed by complete mixing. All of the solutions were equilibrated to 298 ± 0.1 K. The initial first-order rate constants (kin(s^−1^)) for the substrate cleavage were obtained directly from a plot of the NP concentration versus time by using the initial rate method. The errors in the kinvalues were less than 5%. The ε value for NP at pH 7.2 was 10,398. The inhibition study was performed by following a similar procedure, except for the pre-equilibrium incubation after mixing DBBA with CuL^1^.Kinetic resolution of racemic S
2The hydrolysis of racemic S
2was performed using a method similar to that described in the previous section. Racemic S2(10.0 μM) was mixed with CuL^1^ (100 μM) under the same conditions as those used in the kinetic studies. The reaction process was monitored with a UV/Vis spectrometer. Then, upon mixing of the reaction mixture with ethyl acetate, the products (Boc-Phe-OH and 4-nitrophenol) and remaining S2were completely extracted into the organic phase[@b44]. The organic phase was evaporated to dryness under reduced pressure, and the resulting residue was dissolved in ethanol for HPLC analysis. The chiral HPLC analyses were performed at room temperature with a CHIRALPAK^®^ IC 250 × 4.6 mm column and monitored by a UV-Vis detector at 254 nm; the elution solvent was 40/30/30 H2O (0.1% formic acid)/CH3CN/EtOH, and the flow rate was 1.0 mL/min.Additional Information
How to cite this article: Xue, S.-S. et al. Enantioselective Hydrolysis of Amino Acid Esters Promoted by Bis(β-cyclodextrin) Copper Complexes. Sci. Rep. 6, 22080; doi: 10.1038/srep22080 (2016).
Supplementary Material {#S1}
Supplementary Information
This work is supported by National Natural Science Foundation of China (Nos. 21231007 and J1103305), the Ministry of Education of China (Nos. IRT1298 and 313058), the National Basic Research Program of China (973 Program No. 2014CB845604) and the Fundamental Research Funds for the Central Universities.
Author Contributions S.-S.X., M.Z., J.W., Z.-W.M. and L.-N.J. conceived and designed the experiments. S.-S.X., Z.-F.K., B.-C.C., H.S. and Z.-K.C. performed the experiments. S.-S.X., J.W. and Z.-W.M. analyzed the data. S.-S.X., M.Z., J.W. and Z.-W.M. wrote the paper. All authors discussed the results and commented on the manuscript.
[image: Schematic representations of (a) the structures of CuL^1^ and CuL^2^ and (b) the hydrolysis of S1, S2 and S3 catalysed by CuL^1^ and CuL^2^.] {#f1}
[image: Initial-rate kinetics.Hydrolysis of single enantiomers of the substrates (2.5 μM) a) S1, b) S2, c) S3 by CuL^1^ (50 μM) ( for the L-isomer, for the D-isomer) and CuL^2^ (50 μM) ( for the L-isomer, for the D-isomer) and spontaneous hydrolysis (the solid line in black). The reactions were performed in a 10% MeCN solution in HEPES buffer (pH 7.2, 50 mM) at 298 ± 0.1 K.] {#f2}
[image: Saturation kinetics.Michaelis--Menten kinetics for the hydrolysis of the substrates (2.5 μM) in the presence of CuL^1^ (5.0--25 μM) in a 10% MeCN solution in HEPES buffer (pH 7.2, 50 mM) at 298 ± 0.1 K.] {#f3}
[image: Inhibition reaction and theoretical calculation.Hydrolysis of (a) L**-S2, and (b) D-S2 by CuL^1^ in the presence or absence of DBBA in HEPES buffer (pH 7.2, 50 mM) containing 10% MeCN at (298 ± 0.1) K, [CuL^1^] = [S2] = [DBBA] = 10.0 μM. Optimized structures of the (c) L-S2-CuL^1^ and (d) D-S**2-CuL^1^ complexes at the ONIOM(B3LYP/lanl2dz:UFF)/IEFPCM level of theory. Color code: O, red; N, blue; Cu, magenta; C, light grey (catalysts) and cyan (substrates). Hydrogen was omitted. The intramolecular CDs were also omitted in the bottom images for clarity. The metal ions and coordinated water are shown as spheres. All labelled distances are shown in angstroms (Å).] {#f4}
The initial rate constants for S
1-S3(2.5 μM) promoted by different catalysts (50.0 μM) in a 10% MeCN solution in HEPES buffer (pH 7.2, 50 mM) at 298 ± 0.1 K.Catalyst k
in(10^−5^ s^−1^)
CuL^1^ 3.9 2.1 5.4 5.2 × 10^**−1^ 2.0 1.3 CuL^2^ 9.5 × 10^−1^ 7.7 × 10^−1^ 1.6 7.2 × 10^−1^ 3.4 × 10^−1^ 1.9 × 10^−1^ L^1^ 6.2 × 10^−1^ 4.3 × 10^−1^ 8.5 × 10^−1^ 1.8 × 10^−1^ 2.1 × 10^−1^ 1.2 × 10^−1^ L^2^ 4.4 × 10^−1^ 3.1 × 10^−1^ 4.8 × 10^−1^ 1.2 × 10^−1^ 4.3 × 10^−1^ 1.7 × 10^−1^ Cu^2+^ 1.2 × 10^−1^ 6.7 × 10^−2^ 6.1 × 10^−2^
Buffer 5.0 × 10^−2^ 3.2 × 10^−2^ 2.8 × 10^−**2^Kinetic parameters for the hydrolysis of S
1-S3(2.5 μM) in the presence of CuL^1^ (5.0--125 μM) in a 10% MeCN solution in HEPES buffer (50 mM, pH = 7.2) at 298 ± 0.1 K.k
cat(10^−5^s^−1^) Km(μM) kcat/Km(M^−1^ s^−1^) kuncat(10^−7^s^−1^) kcat/kuncatkcat^L^/kcat^D^
S
1L- 12.0 ± 1.0 107.0 ± 16.0 1.1 5.0 2.5 × 10^2^ 2.9 D- 4.2 ± 0.2 42.5 ± 4.3 1.0 8.4 × 10
S2L- 26.2 ± 4.2 197.0 ± 46.0 1.3 3.2 8.1 × 10^2^ 15.7 D- 1.7 ± 0.3 124.0 ± 32.0 0.1 5.2 × 10
S3L- 3.3 ± 0.3 28.5 ± 5.6 1.2 2.8 1.2 × 10^2^ 1.5 D- 2.2 ± 0.1 34.6 ± 3.4 0.6 7.9 × 10Chiral HPLC analysis of the conversion of various amounts of racemic S.
Entry Conversion (%) Remaining e.r. of S
2(L:D)^[a]^ e.r. of Boc-Phe-OH (L:D)^[b]^
1 35 28:72 94:6 2 40 23:77 92:8 3 50 20:80 82:18
[a] The enantiomeric ratio (e.r.) values of remaining substrates were determined by HPLC analysis with a chiral stationary phase. [b] e.r. values of products were calculated from the result of HPLC analysis.
-
- Assistant
Given the complexity and depth of the text regarding biomimetic chemistry, I will process the information as per the outlined sequence and separate System 1 from System 2 applications accordingly. This will involve straightforward observations and more in-depth analytical insights.
[sys1] The study focuses on biomimetic chemistry, particularly hydrolase mimetics. Copper(II) complexes CuL^1^ and CuL^2^ are evaluated for catalytic efficacy in enantioselective hydrolysis. CuL^1^ shows higher enantioselectivity and catalytic efficiency than CuL^2^. [end sys1]
[sys2] 2.1 Understand the Problem: The challenge involves designing effective biomimetic catalysts, particularly focusing on enantioselective hydrolase mimics. The study seeks to understand how CD domains can facilitate high enantioselectivity through cooperative interaction with metal ions.
Reflection: "I recognize that enantioselectivity is crucial for mimetic catalysis, yet the influence of CDs and copper ions on enantioselectivity needs deeper exploration."
Creative Perspective: "Are there potential synergies between CDs and metal ions unexplored in this mimicry, or alternative substrate designs that could enhance selectivity?"
2.2 Analyze the Information: The data describes intricate interactions of copper(II) complexes and cyclodextrins affecting catalytic efficiency and enantioselectivity.
Reflection: "Are we considering the optimal interaction geometries? Could the spatial arrangement of substrates relative to the catalytic site offer new insights?"
Creative Perspective: "Could a slight modification in CD cavities or copper coordination geometry open new pathways for increasing both efficiency and selectivity?"
2.3 Generate Hypotheses:
- Enantioselectivity is primarily driven by the geometric arrangement of CDs. (Confidence: 0.8, Creative: 0.6)
- Catalytic efficiency stems from the cooperativity between CDs and copper ions. (Confidence: 0.7, Creative: 0.5)
- Different substrate binding within CD cavities directly affects reaction speed. (Confidence: 0.6, Creative: 0.7)
- Minimal structural changes in CD complex influence the homogeneity of substrate binding. (Confidence: 0.5, Creative: 0.6)
- Photochemical properties of CDs could alter enantioselectivity. (Confidence: 0.4, Creative: 0.8)
- Enhanced interaction of copper ions could contribute to catalytic differentiation. (Confidence: 0.7, Creative: 0.6)
- Stereochemical orientation is crucial for hydrolysis product distribution. (Confidence: 0.8, Creative: 0.5)
- Non-covalent interactions between substrates and CDs play a pivotal role. (Confidence: 0.6, Creative: 0.7)
- The chiral orientation of CD domains is less significant than initially thought. (Confidence: 0.5, Creative: 0.4)
- Reaction conditions, such as solvent and pH, are significantly affecting outcomes. (Confidence: 0.7, Creative: 0.5)
Reflection: "Am I adequately capturing the variety of chemical influences impacting selectivity and efficiency? Is there any hidden complexity not addressed?"
Creative Perspective: "Could novel computational models offer further insights into the intricate dynamics of CD-copper interactions?"
2.4 Anticipate Future Steps and Obstacles: Objective: Predict challenges like variations in enantiomeric excess with alternative substrates or reaction conditions.
Reflection: "What specific reaction environments could limit the applicability of these complexes? How to optimize their versatility across diverse substrates?"
Creative Perspective: "Could alternative metal ions or CD derivatives propel the catalytic potential even further? What other variables might optimize these reactions?"
[end sys2]
[sys1] CuL^1^ emerges as the more effective catalyst due to its enantioselectivity and catalytic efficiency. Hydroxylation of amino acid esters occurs with varying degrees based on catalyst and substrate orientation. [eq1]( \text{Catalyst → Product Formation}) [end sys1]
[sys2] 2.5 Evaluate Hypotheses: Evaluate hypothesis based on their feasibility in enhancing catalysts' applicability across various reactions.
Evaluation: Refine Confidence and Creative Scores as needed to identify promising methods for tuning catalytic performance.
Reflection: "How unbiased are my assessments? Are there ideas robust enough to withstand variable reaction conditions?"
Creative Perspective: "Should we invest in molecular dynamics simulations to understand better and optimize potential catalytic pathways?"
2.6 Select the Best Hypothesis: The interaction between CDs and copper ions potentially holds the key to enhancing enantioselective hydrolysis.
Reflection: "This hypothesis stands out by directly linking structure with performance, facilitating precise adjustments."
Creative Perspective: "Leveraging our understanding of cooperative CD-metal ion relationships could open new strategic avenues in catalyst design."
2.7 Implement the Hypothesis: Design experiments that vary CD derivatives and copper ion compositions to understand which configurations optimize catalysis.
Reflection: "Is this plan viable within resource constraints? Have I maximized potential outcomes from both adjustments?"
Creative Perspective: "Refine experimental steps to unlock unexpected benefits—rethinking interaction protocols could reveal new opportunities."
[end sys2]
[sys1] Monitoring catalyst synthesis and testing across varied conditions provides immediate feedback for adaptive strategies. [eq2]( \text{Feedback Loop → Ongoing Optimization}) [end sys1]
[sys2] 2.8 Monitor and Review Progress: Assess progress by tracking catalytic efficiency metrics and monitoring any shifts in enantioselectivity in real-time.
Reflection: "What areas are underperforming? Where might small changes yield significant improvements?"
Creative Perspective: "Emerging patterns might indicate new catalytic opportunities or reveal previously unidentified bottlenecks."
2.9 Reflect and Capture Insights: Capture the intricate relationship between CD structures and copper ion coordination as the driving force behind catalytic performance.
Reflection: "What insights have emerged regarding the broader implications for biomimetic catalyst design?"
Creative Perspective: "Could these findings inspire innovative analogs or drive future explorations in biomimetic chemistry towards untapped potential?"
[end sys2]
[sys1] CuL^1^ and CuL^2^ provide a foundation for developing more efficient biomimetic catalysts through continued exploration of CD and metal ion interactions. [end sys1]
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.