Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-08-06· OpenAIAi2 WildChat-4.8M (AI2)

You are a helpful assistant that generates a structured json string based on an existing…

  1. User

    You are a helpful assistant that generates a structured json string based on an existing json string containing several lists and several key value pairs. You are to output the reworded value for the key 'info' in the json repair content. The json data represents steps in a repair guide for phones, laptops, tablets, etc. value or json block to reword: Two of the screws are screwed into the frame of the backcover and are each hidden under a black sticker. - You need to modify and output in the same format. Do not explain. Do not introduce. ONLY output valid json. with key 'info' and the value you generate. - Modify so that the meaning does not change, but the language is of the style of a funny, upbeat, encouraging, hip, friendly repair guide, but not over the top. - modify explanations and introductions as necessary. - Do not say 'idoc', 'diva', 'This fix', 'fabulous'. Dont be overly excited, but be friendly. Do not call the tutorial 'friendly tutorial'. Its a clear concise and easy to read tutorial. This is a step by step repair guide. The repair company is Salvation Repair. any references should be directed in the form schedule a repair - Do not modify any 'media', 'title' keys or links of any kind. Do not add keys (if is a json block). do not leave out any keys (if present). Here is total json data for reference: {'category': 'iPhone 7 Repair guide', 'title': 'iPhone 7 - Replacing the Lightning connector', 'meta_duration': '90 min.', 'meta_difficulty': 'Difficult', 'meta_steps': '37 Steps', 'top_section': {'title': "Is your iPhone 7 acting like a charging-challenged diva? Don't worry, we've got your back! This guide will help you replace that pesky Lightning connector. Let's get this party started!", 'description': 'No need to stress! In this photo guide, we’ll walk you through the process of swapping out that troublesome Lightning connector on your iPhone step by step. This fix is also a lifesaver if your calls are sounding a bit fuzzy, since the microphone and Lightning connector share the same cable. You can snag a top-notch Lightning connector for your iPhone 7, along with the perfect toolkit, in our online store. Happy repairing!', 'tools': [{'name': 'Tool for prying out batteries', 'description': 'You have to use a very stable tool to pry out the battery. At the same time, it has to be flat enough to insert below the battery.', 'url': 'https://www.amazon.de/s?k=Akku%20Spudger&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Heat gun', 'description': 'You can use a heat gun to heat parts that are glued on so they’re easier to remove.\r\nIn most cases, you can also use a hairdryer.', 'url': 'https://www.amazon.de/s?k=Heißluftgerät&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'For storing screws', 'description': 'We recommend storing your screws so you don’t mix up the various screws and small parts.', 'url': 'https://www.amazon.de/s?k=Magnetmatte&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Menda ESD Spudger', 'description': 'You need a flat plastic prying tool to disconnect the various plugs and connectors.', 'url': 'https://www.amazon.de/s?k=Menda%20ESD%20Spudger&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Tweezers', 'description': 'We recommend using tweezers to remove screws and various small parts from your device.', 'url': 'https://www.amazon.de/s?k=Piergiacomi%20Pinzette%202a%20SA%20ESD&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pick Set', 'description': 'You need a flat but stable tool such as a pick to pry out parts that are glued in place.', 'url': 'https://www.amazon.de/s?k=Plektrum-Set&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'SIM Tool', 'description': 'If you want to use a different SIM card or repair most parts of your Apple devices, you’ll have to remove the SIM card first. The SIM card tray only comes out if you insert a tool with a very fine point into the small hole next to the SIM card slot. This tool is designed especially for ejecting the SIM card from all iPhones and iPads, and fits perfectly into the appropriate opening.', 'url': 'https://www.amazon.de/s?k=Sim%20Tool&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Steel Laboratory Spatula', 'description': 'You need a flat and sturdy prying tool to disconnect glued parts.', 'url': 'https://www.amazon.de/s?k=Stahlspatel&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pentalobe PL1 screwdriver', 'description': 'You need the right screwdriver for removing pentalobe PL1 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Pentalobe%20Schraubendreher%20PL1&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Phillips PH00 screwdriver', 'description': 'You need the right screwdriver for removing PH00 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Phillips%20Schraubendreher%20PH00&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Y-type Y000 screwdriver', 'description': 'You need the right screwdriver for removing Y-type screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Y-Type%20Schraubendreher%20Y000&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'iPhone 7 Lightning Connector', 'description': '', 'url': 'https://www.amazon.de/s?k=iPhone%207%20Lightning%20Connector&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}]}, 'headline': "Let's Dive into Your iPhone 7 Repair Adventure!", 'headline_text': "Stuck? Got questions? Hit us up with a comment – we're here to help you rock this repair!", 'steps': {'step-1': {'title': 'Switching off your iPhone 7', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5783_file16035_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5783_file15553_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5783.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5783_file16035_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5783_file16035_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5783_file16035_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5783_file15553_120.jpg'], 'tools': [], 'instructions': ["Hey there, champ! Let's keep your iPhone safe from any electrical mishaps. First things first: power it down completely.", "Hit that sleep/wake button until you see the 'Slide to power off' option.", "Swipe that slider – it's your ticket to a safe repair!", 'Your iPhone will power off in about 10 seconds. Ready to roll?']}, 'step-2': {'title': 'Removing the rear case screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5784_file16036_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5784.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5784_file16036_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5784_file16036_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5784_file16036_120.jpg'], 'tools': ['Wiha PicoFinish Pentalobe Screwdriver PL1', 'Magnetic Pad'], 'screws': ['2 × 3,3 mm Pentalobe'], 'info': 'Keep your tiny screws and parts organized! A nifty magnetic parts tray is super helpful (Salvation Repair recommends one!), or get creative – an old sewing kit works wonders. Arrange everything neatly so you can put it all back just like you found it – easy peasy!', 'instructions': ['Use a Pentalobe screwdriver to remove the two Pentalobe screws located to the left and right of the Lightning connector.', 'Place the loosened screws in a screw storage.']}, 'step-3': {'title': 'Heating up the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5785_file16037_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5785.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5785_file16037_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5785_file16037_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5785_file16037_120.jpg'], 'tools': ['Heat gun'], 'info': 'As a rule of thumb, heat your device only enough to make it comfortable to touch without burning your fingers.', 'instructions': ['To kick things off, lay your iPhone 7 on a nice, soft surface. This will keep that back cover looking sharp and scratch-free!', "Grab your trusty hot air tool—whether it's a heat gun or a hairdryer—and gently wave it over the edge of the screen. This will warm up the adhesive and make your life a whole lot easier."]}, 'step-4': {'title': 'Lifting up the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5917_file25528_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5917_file25529_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5917.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5917_file25528_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5917_file25528_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5917_file25528_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5917_file25529_120.jpg'], 'tools': ['Pick Set', 'VAKUPLASTIC Suction Cup'], 'alert': "Opening up your iPhone 7 means saying goodbye to that sweet warranty for dust, splash protection, and waterproofing. But hey, you're about to become a repair rockstar!", 'instructions': ['Once the display edge is well heated, you can place a suction cup on the display at the height of the home button.', 'Pull the suction cup upwards to create a narrow gap between the aluminium frame and the display.', 'At the same time, insert a flat, stable tool into the resulting gap. We use a hard plastic plectrum for this purpose.', 'Try to enlarge the gap by pushing the aluminium frame down with the tool.']}, 'step-5': {'title': 'Detaching the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step7860_file26083_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step7860_file26084_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step7860_file26083_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step7860_file26084_120.jpg'], 'tools': ['Heat gun', 'Pick Set', 'Flat Picks'], 'alert': "Hey there! Just a friendly reminder: when you're using those picks, keep them a bit shy of the sleep/wake button. We want to keep that flex cable of the display safe and sound!", 'info': "Keep warming up the display's edge and pop in those flat picks to keep the glue from getting all clingy again in the spots you've already loosened. You're doing great!", 'instructions': ['Now move the pick once around the display and slightly lift the display up so that the noses come off the aluminium frame.']}, 'step-6': {'title': 'Disconnecting the battery connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5786_file16071_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file15569_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file16072_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file15570_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5786.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5786_file16071_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5786_file16071_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5786_file16071_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file15569_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file16072_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5786_file15570_120.jpg'], 'tools': ['Pry Tool', 'Piergiacomi Tweezers 2a SA ESD', 'Wiha PicoFinish Y-Type Screwdriver Y000'], 'screws': ['1 × 2,4 mm Y-Type', '3 × 1,0 mm Y-Type', 'Battery connector'], 'alert': 'Start your repair journey by loosening the battery connector. This little step is your best buddy in avoiding any unexpected short circuits and keeping your iPhone 7 from accidentally waking up while you’re in the zone!', 'instructions': ['Grab your Y-type screwdriver and get ready to work some magic! Loosen those four Y-type screws like a pro, and then gently lift off the bracket plate that’s cozying up to the battery connector.']}, 'step-7': {'title': 'Detaching the display connectors', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5787_file16073_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5787_file15627_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5787_file15702_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5787.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5787_file16073_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5787_file16073_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5787_file16073_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5787_file15627_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5787_file15702_120.jpg'], 'tools': ['Pry Tool'], 'screws': ['Display connector', 'Home button connector'], 'alert': "When you're popping off those display connectors, make sure to start from the side without any tiny components hanging out. This little tip helps you dodge any potential mishaps!", 'instructions': ["Alright, let's get those display connectors separated! Use your trusty plastic spudger to gently pry apart the display connector and the home button connector, just like you did before. You've got this!"]}, 'step-8': {'title': 'Detaching the FaceTime connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5788_file16074_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15578_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file16075_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15580_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15581_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5788.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5788_file16074_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5788_file16074_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5788_file16074_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15578_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file16075_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15580_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5788_file15581_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['2 × 1,2 mm Phillips', 'FaceTime connector'], 'alert': 'When detaching the FaceTime connector start from the side where there are no small components on the board. This way you avoid potential damage.', 'instructions': ['In the first step, remove the two Phillips screws fixing the bracket plate over the FaceTime connector and take it out.']}, 'step-9': {'title': 'Removing the Taptic Engine', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5789_file16089_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15582_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file16090_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15586_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file16091_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15588_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5789.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5789_file16089_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5789_file16089_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5789_file16089_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15582_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file16090_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15586_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file16091_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5789_file15588_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['2 × 1,9 mm Phillips', 'Taptic Engine connector', '3 × 1,5 mm Phillips'], 'alert': "When you're disconnecting those connectors, aim for the side that's free from tiny parts. This little move is your secret sauce to dodging any damage – you're on the right track!", 'instructions': ['Unscrew the two Phillips screws from the plastic cover and remove it.']}, 'step-10': {'title': 'Removing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5949_file16060_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5949_file16061_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5949.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5949_file16060_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5949_file16060_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5949_file16060_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5949_file16061_120.jpg'], 'tools': ['Battery Spudger', 'Piergiacomi Tweezers 2a SA ESD'], 'alert': 'Keep a steady grip on both the battery and your iPhone while you pull that last adhesive strip. We don’t want the battery making a surprise exit from the device!', 'info': 'If one of the adhesive strips tears, we recommend that you use a battery spudger to carefully lever out the battery.', 'instructions': ["Alright, let's get those adhesive tabs off the battery! Grab your trusty tweezers and gently pull those tabs away from the battery surface. You've got this!"]}, 'step-11': {'title': 'Removing the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5888_file16201_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16202_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16203_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16204_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5888.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5888_file16201_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5888_file16201_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5888_file16201_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16202_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16203_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5888_file16204_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['2 × 1,3 mm Phillips', '1 × 1,9 mm Phillips', '1 × 3,2 mm Phillips', 'Antenna connectors'], 'alert': 'When detaching the antenna connectors always lever from the side where there are no small components on the board. This way you avoid potential damage.', 'instructions': ['Gently wiggle those antenna cable connectors away from the logic board using a spudger or tweezers—no need to rush, take your time!', 'Next up, grab your Phillips screwdriver and unscrew the four screws that are keeping the speaker snug in its spot.', 'Now, with a little lift, you can pull out the speaker along with the antenna cable. Easy peasy!']}, 'step-12': {'title': 'Removing the iSight camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5810_file16205_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5810_file16207_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5810_file16206_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5810.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5810_file16205_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5810_file16205_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5810_file16205_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5810_file16207_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5810_file16206_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['Camera connector', '1 × 2,3 mm Phillips', '1 × 1,3 mm Phillips'], 'alert': "When you're detaching the camera connector, make sure to start from the side that’s free of tiny components on the board. This little move helps you steer clear of any potential mishaps!", 'instructions': ["Gently pop off the iSight camera connector using your spudger – it's like giving it a little nudge!", 'Unscrew the two Phillips screws holding the cover plate above the camera and lift it out of the case with ease.', "Now, grab your tweezers and carefully lift the camera from its cozy spot in the rear case. You're doing great!"]}, 'step-13': {'title': 'Detaching the connector of the volume control cable', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5890_file16208_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5890_file16210_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5890_file16209_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5890.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5890_file16208_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5890_file16208_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5890_file16208_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5890_file16210_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5890_file16209_120.jpg'], 'tools': ['Pry Tool', 'Piergiacomi Tweezers 2a SA ESD', 'Wiha PicoFinish Y-Type Screwdriver Y000'], 'screws': ['2 × 1,1 mm Y-Type', 'Volume control cable connector'], 'alert': 'Hey there, cool cat! When unhooking that volume control cable connector, sneak up on it from the side where the board is nice and clear of tiny parts. This keeps things safe and sound, preventing any accidental mishaps. You got this!', 'instructions': ["Alright, cool beans! Let's get those two Y-type screws on that silver cover plate loosened. Easy peasy, lemon squeezy!"]}, 'step-14': {'title': 'Detaching the cover of the Wi-Fi antenna', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5891_file16212_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16213_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16291_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16214_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5891.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5891_file16212_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5891_file16212_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5891_file16212_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16213_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16291_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5891_file16214_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 1,6 mm Phillips', '3 × 1,1 mm Phillips', '1 × 2,1 mm Phillips', '1 × 1,3 mm Phillips'], 'info': "One screw's hiding on the back cover's side – keep an eye out! A magnetic parts tray (Salvation Repair's got great ones!) will be your best friend for keeping track of all those tiny pieces. Stay organized, and putting everything back will be a breeze!", 'instructions': ['Alright, let’s get those four Phillips screws outta the way! Unscrew them from the antenna cover and then lift that cover off like a pro!']}, 'step-15': {'title': 'Removing the Wi-Fi antenna', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5892_file16282_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5892_file16224_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5892_file16222_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5892.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5892_file16282_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5892_file16282_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5892_file16282_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5892_file16224_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5892_file16222_120.jpg'], 'tools': ['Heat gun', 'Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD', 'Steel Laboratory Spatula'], 'screws': ['1 × 1,3 mm Phillips', '1 × 1,2 mm Phillips', 'Wi-Fi antenna connector'], 'alert': 'When detaching the connector of the Wi-Fi connector always lever from the side where there are no small components on the board. This way you avoid potential damage.', 'info': 'One of the two screws is hanging out on the side of the housing, just waiting for you to give it some attention!', 'instructions': ["First up, grab your trusty spudger and gently pop off the Wi-Fi antenna connector from the logic board. You've got this!", "Next, let's tackle those two Phillips screws that are holding the flex cable in place. Time to set them free!"]}, 'step-16': {'title': 'Removing the SIM tray', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5893_file16225_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5893_file16226_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5893.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5893_file16225_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5893_file16225_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5893_file16225_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5893_file16226_120.jpg'], 'tools': ['SIM Tool'], 'instructions': ['Pop that SIM tray out of the back case! Just grab your trusty SIM tool or a paper clip, and give a gentle press into the tiny hole next to the SIM tray. Easy peasy!']}, 'step-17': {'title': 'Detaching the logicboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5894_file16228_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16229_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16230_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16227_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5894.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5894_file16228_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5894_file16228_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5894_file16228_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16229_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16230_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5894_file16227_120.jpg'], 'tools': ['Pry Tool', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 1,3 mm Phillips', '1 × 2,1 mm Standoff', '4 × 2,0 mm Standoff', 'Lightning connector'], 'info': 'There is a special screwdriver for the stand-off screws, but the screws can also be loosened with a slotted screwdriver.', 'instructions': ["Alright, superstar! Time to get that logic board secured. Start by unscrewing those six screws that are holding it in place. You've got this!"]}, 'step-18': {'title': 'Removing the Lightning connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5895_file16233_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16234_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16231_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16232_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5895.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5895_file16233_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5895_file16233_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5895_file16233_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16234_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16231_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5895_file16232_120.jpg'], 'tools': ['Heat gun', 'Wiha PicoFinish Phillips Screwdriver PH00', 'Steel Laboratory Spatula'], 'screws': ['2 × 1,6 mm Phillips', '2 × 1,3 mm Phillips', '1 × 2,6 mm Phillips'], 'info': 'Two of the screws are screwed into the frame of the backcover and are each hidden under a black sticker.', 'instructions': ['Start by unscrewing the five Phillips screws that attach the Lightning Connector to the back cover.']}, 'step-19': {'title': 'Preparing the Lightning connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6178_file17557_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6178_file17557_120.jpg'], 'tools': [], 'instructions': ['Prepare the new Lightning connector by removing all blue and yellow protective films over the adhesive surfaces.']}, 'step-20': {'title': 'Installing the Lightning connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5914_file16259_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16258_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16260_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16257_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5914.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5914_file16259_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5914_file16259_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5914_file16259_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16258_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16260_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5914_file16257_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['2 × 1,3 mm Phillips', '2 × 1,6 mm Phillips', '1 × 2,6 mm Phillips'], 'alert': 'Make sure to align the flex cable of the Lightning connector correctly, otherwise the connector cannot be attached correctly to the logicboard. The two small white dots on the bottom of the back cover must be visible through the cut-outs in the flex cable (see Figure 4).', 'instructions': ['Put the flex cable of the Lightning connector back in its original position and press it flat on the bottom of the back cover.', 'Push the socket and the two golden microphones back into their leads on the edge of the rear case.', 'Fasten the whole unit with five screws and the small silver bracket.']}, 'step-21': {'title': 'Inserting the logicboard', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5915_file16263_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5915_file16262_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5915_file16261_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5915.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5915_file16263_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5915_file16263_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5915_file16263_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5915_file16262_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5915_file16261_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 1,3 mm Phillips', '1 × 2,1 mm Standoff', '4 × 2,0 mm Standoff'], 'instructions': ['Put the cover for the flash light on.', 'Place the logicboard back where it was originally. The camera lead should be seated above the board.', 'Fasten it with the screws again.']}, 'step-22': {'title': 'Inserting the SIM tray', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5916_file16264_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5916.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5916_file16264_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5916_file16264_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5916_file16264_120.jpg'], 'tools': [], 'info': 'If you’re having trouble sliding it in, check the position of the logicboard.', 'instructions': ['Now slide the SIM tray back into the appropriate opening.']}, 'step-23': {'title': 'Attaching the connectors', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5919_file16265_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5919.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5919_file16265_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5919_file16265_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5919_file16265_120.jpg'], 'tools': [], 'screws': ['Lightning connector', 'Volume control cable connector'], 'alert': 'Never connect the sensitive connectors with force.', 'instructions': ['Reattach the Lightning connector and the connector of the volume control cable, so that they click into place audibly and noticeably.']}, 'step-24': {'title': 'Installing the Wi-Fi antenna', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5918_file16266_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5918_file16268_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5918_file16267_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5918.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5918_file16266_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5918_file16266_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5918_file16266_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5918_file16268_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5918_file16267_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 1,3 mm Phillips', '1 × 1,2 mm Phillips', 'Antenna connector'], 'instructions': ['Put the Wi-Fi antenna back into its original position in the iPhone rear case and screw it tight.', 'Press it lightly to restore the bond.', 'Finally, reconnect the antenna connector, so that it clicks into place.']}, 'step-25': {'title': 'Installing the antenna cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5920_file16271_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16270_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16272_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16269_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5920.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5920_file16271_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5920_file16271_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5920_file16271_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16270_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16272_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5920_file16269_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['1 × 2,1 mm Phillips', '1 × 1,3 mm Phillips', '1 × 1,6 mm Phillips', '3 × 1,1 mm Phillips'], 'instructions': ['Put the small connecting plate back to its original position and screw it together with the two Phillips screws.', 'Then put the antenna cover back on and screw it with Phillips screws as well.']}, 'step-26': {'title': 'Installing the bracket plate', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5923_file16273_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5923_file16274_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5923.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5923_file16273_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5923_file16273_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5923_file16273_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5923_file16274_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD', 'Wiha PicoFinish Y-Type Screwdriver Y000'], 'screws': ['2 × 1,1 mm Y-Type'], 'instructions': ['Replace the silver cover over the the volume control cable connector.', 'Screw it in with the two Y-type screws.']}, 'step-27': {'title': 'Connecting the iSight camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5811_file16275_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5811_file16276_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5811.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5811_file16275_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5811_file16275_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5811_file16275_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5811_file16276_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['Camera Connector', '1 × 2,3 mm Phillips', '1 × 1,3 mm Phillips'], 'instructions': ['Put the iSight camera back into its lead in the back cover and attach its connector.', 'Place the cover plate over the camera and screw it in place.']}, 'step-28': {'title': 'Installing the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5924_file16280_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5924_file16281_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5924_file16277_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5924.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5924_file16280_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5924_file16280_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5924_file16280_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5924_file16281_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5924_file16277_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['2 × 1,3 mm Phillips', '1 × 1,9 mm Phillips', '1 × 3,2 mm Phillips', 'Antenna connectors'], 'alert': 'When inserting the speaker, be careful not to pinch the antenna cables.', 'instructions': ['Put the speaker back in its original place at the bottom of the back cover.', 'Secure it with the four Phillips screws.', 'Position the antenna cables, slide them into the lead and connect them to the board.']}, 'step-29': {'title': 'Preparing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5791_file16055_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15601_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15597_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15599_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15600_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15602_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5791.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5791_file16055_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5791_file16055_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5791_file16055_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15601_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15597_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15599_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15600_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5791_file15602_120.jpg'], 'tools': [], 'alert': 'The adhesive strips must be correctly aligned. Check the alignment by placing the adhesive strips in your iPhone beforehand.', 'instructions': ['Remove the large blue protective film from the adhesive strips and place them centred on the bottom of the new battery, with the adhesive side facing down, .', 'Turn the battery over and remove the small blue protective film from the adhesive tabs.', 'Press the tabs firmly on the edge of the battery and turn the battery over again.', 'Now pull the remaining pink protective film from the adhesive strips.']}, 'step-30': {'title': 'Inserting the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5792_file16054_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5792_file16294_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5792.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5792_file16054_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5792_file16054_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5792_file16054_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5792_file16294_120.jpg'], 'tools': [], 'info': 'Position the battery, so that it is slightly off the frame on all sides.', 'instructions': ['Insert the battery back into the rear case of your iPhone 7. Use the battery connector to replace the battery.']}, 'step-31': {'title': 'Inserting the Taptic Engine', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5793_file16056_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file16092_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file15605_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file15606_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file16093_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5793.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5793_file16056_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5793_file16056_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5793_file16056_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file16092_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file15605_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file15606_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5793_file16093_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['3 × 1,5 mm Phillips', 'Taptic Engine Connector', '2 × 1,9 mm Phillips'], 'instructions': ['Put the Taptic Engine back to its original position between the battery and the Lightning connector.', 'Fix the Taptic Engine with the three Phillips screws.', 'Then attach the Taptic Engine connector.', 'Finally, place the plastic cover back over the connector and secure it with the two Phillips screws.']}, 'step-32': {'title': 'Attach the adhesive frame', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6699_file20141_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20140_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20139_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20137_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20138_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6699.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6699_file20141_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6699_file20141_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6699_file20141_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20140_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20139_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20137_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6699_file20138_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD'], 'alert': 'Despite the attachment of a new adhesive frame, your iPhone 7 is no longer 100% waterproof after repair.', 'info': 'We will show how to attach the adhesive frame using iPhone 8 as an example. The process is the same for iPhone 7.', 'instructions': ['To make sure the new adhesive frame fits properly, you must first remove all old adhesive residue from the back cover and display frame.', 'Try placing the adhesive frame on the back cover to align it correctly.']}, 'step-33': {'title': 'Attaching the the FaceTime connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5794_file16046_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5794_file15610_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5794_file15634_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5794.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5794_file16046_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5794_file16046_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5794_file16046_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5794_file15610_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5794_file15634_120.jpg'], 'tools': ['Wiha PicoFinish Phillips Screwdriver PH00', 'Piergiacomi Tweezers 2a SA ESD'], 'screws': ['FaceTime connector', '2 × 1,2 mm Phillips'], 'info': 'Just as with detaching the FaceTime connector, it is recommended to lean the display against a stable object to prevent the flex cables from overstretching.', 'instructions': ['To reconnect the display unit to the logicboard, first place it upright at the top of the back cover.', 'Reattach the connector of the FaceTime camera by gently pressing it with your finger until it clicks into place.', 'Once the connector is attached, you can place the display on the side of the back cover.']}, 'step-34': {'title': 'Connecting the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5795_file16085_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15612_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15615_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15613_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15614_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5795.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5795_file16085_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5795_file16085_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5795_file16085_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15612_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15615_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15613_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5795_file15614_120.jpg'], 'tools': [], 'screws': ['Display connector', 'Home button connector'], 'instructions': ['Reconnect the home button and display connector to the logicboard.']}, 'step-35': {'title': 'Attaching the battery connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5796_file16047_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5796_file15616_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5796_file16084_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5796.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5796_file16047_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5796_file16047_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5796_file16047_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5796_file15616_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5796_file16084_120.jpg'], 'tools': ['Piergiacomi Tweezers 2a SA ESD', 'Wiha PicoFinish Y-Type Screwdriver Y000'], 'screws': ['1 × 2,4 mm Y-Type', '3 × 1,0 mm Y-Type'], 'instructions': ['Now also reconnect the battery connector.', 'Then put the bracket plate back on the battery connector and fix it with the four Y-type screws.']}, 'step-36': {'title': 'Attaching the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5797_file16048_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file26503_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file15618_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file15620_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5797.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5797_file16048_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5797_file16048_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5797_file16048_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file26503_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file15618_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step5797_file15620_120.jpg'], 'tools': [], 'screws': ['Wrong position', 'Right position'], 'alert': 'Make sure that the silver chip on the cable is in exactly the same position as before (see photo). If the chip is in the wrong position, discolorations and spots will appear on the screen after installation. In this case, you have to adjust the position of the cable again.', 'instructions': ['Place the display on the side of the back cover frame and carefully fold it over.', 'Slide the display in the direction of the sleep/wake button so that the lugs on the display hook properly into the back cover.', 'Then press the display into the frame over its entire surface.']}, 'step-37': {'title': 'Fastening the rear case screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5798_file16051_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step5798.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step5798_file16051_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step5798_file16051_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5798_file16051_120.jpg'], 'tools': ['Wiha PicoFinish Pentalobe Screwdriver PL1'], 'screws': ['2 × 3,3 mm Pentalobe'], 'instructions': ['Now fasten the two Pentalobe screws again left and right of the Lightning connector.']}}}

  2. Assistant
    {
        "info": "Two sneaky screws are snug in the backcover's frame, hidden away like tiny treasures under a pair of black stickers."
    }