You are a helpful assistant that generates a structured json string based on an existing…
- User
You are a helpful assistant that generates a structured json string based on an existing json string containing several lists and several key value pairs. You are to output the reworded value for the key 'description' in the json repair content. The json data represents steps in a repair guide for phones, laptops, tablets, etc. value or json block to reword: In this guide, we show you how to replace your iPhone 5’s defective battery. This repair can help if your iPhone crashes during heavy use because the voltage temporarily drops, you can no longer charge it or turn it on, or the battery life is very low. - You need to modify and output in the same format. Do not explain. Do not introduce. ONLY output valid json. with key 'description' and the value you generate. - Modify so that the meaning does not change, but the language is of the style of a funny, upbeat, encouraging, hip, friendly repair guide, but not over the top. - modify explanations and introductions as necessary. - Do not say 'idoc', 'diva', 'This fix', 'fabulous'. Dont be overly excited, but be friendly. Do not call the tutorial 'friendly tutorial'. Its a clear concise and easy to read tutorial. This is a step by step repair guide. The repair company is Salvation Repair. any references should be directed in the form schedule a repair - Do not modify any 'media', 'title' keys or links of any kind. Do not add keys (if is a json block). do not leave out any keys (if present). Here is total json data for reference: {'category': 'iPhone 5 Repair guide', 'title': 'iPhone 5 - Replacing the battery', 'meta_duration': '15 min.', 'meta_difficulty': 'Easy', 'meta_steps': '9 Steps', 'top_section': {'title': 'Is your iPhone feeling a bit sluggish? It keeps crashing or just won’t charge up!', 'description': 'In this guide, we show you how to replace your iPhone 5’s defective battery. This repair can help if your iPhone crashes during heavy use because the voltage temporarily drops, you can no longer charge it or turn it on, or the battery life is very low. ', 'tools': [{'name': 'For storing screws', 'description': 'We recommend storing your screws so you don’t mix up the various screws and small parts.', 'url': 'https://www.amazon.de/s?k=Magnetmatte&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Menda ESD Spudger', 'description': 'You need a flat plastic prying tool to disconnect the various plugs and connectors.', 'url': 'https://www.amazon.de/s?k=Menda%20ESD%20Spudger&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Tweezers', 'description': 'We recommend using tweezers to remove screws and various small parts from your device.', 'url': 'https://www.amazon.de/s?k=Piergiacomi%20Pinzette%202a%20SA%20ESD&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pick Set', 'description': 'You need a flat but stable tool such as a pick to pry out parts that are glued in place.', 'url': 'https://www.amazon.de/s?k=Plektrum-Set&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Steel Laboratory Spatula', 'description': 'You need a flat and sturdy prying tool to disconnect glued parts.', 'url': 'https://www.amazon.de/s?k=Stahlspatel&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pentalobe PL1 screwdriver', 'description': 'You need the right screwdriver for removing pentalobe PL1 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Pentalobe%20Schraubendreher%20PL1&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Phillips PH00 screwdriver', 'description': 'You need the right screwdriver for removing PH00 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Phillips%20Schraubendreher%20PH00&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'iPhone 5 Battery', 'description': '', 'url': 'https://www.amazon.de/s?k=iPhone%205%20Akku&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}]}, 'headline': 'Getting started with the repair of your iPhone 5', 'headline_text': 'If you get stuck or have questions, you can post a comment. We’d be happy to help.', 'steps': {'step-1': {'title': 'Removing the enclosure screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1134_file2522_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1134_file2522_120.jpg'], 'tools': [], 'instructions': ['You need a pentalobe screwdriver to open the iPhone 5.', 'Remove the two pentalobe screws at the bottom of the enclosure. They are located to the right and left of the Lightning connector. LPut the screws in the same compartment of your organizer tray.2 x 3.6 mm pentalobe screws']}, 'step-2': {'title': 'Lifting the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1135_file2548_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2527_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2528_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2529_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2530_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1135_file2548_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2527_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2528_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2529_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1135_file2530_120.jpg'], 'tools': [], 'instructions': ['Put your iPhone 5 on a soft, clean surface to avoid scratching the back.', 'To lift the front panel, you need a suction cup and the hard plastic pick. If the screen is severely cracked, cover all of it with packing tape.', 'Place the suction cup over the Home button (if possible) or next to it (see figure 1). While lifting the screen with the suction cup, insert the hard plastic pick between the aluminum frame and the display frame and press down the aluminum frame. Also use the hard plastic pick to raise the screen (see figures 2 and 3). This usually takes several attempts.', 'As soon as you can lift the screen a little bit (see figure 4), you have to carefully work your way around the outside until it’s loosened on both sides (see figure 5).', 'Once the display is fully detached, you can flip it up at the Home button. Note that the display cables are still connected to the logic board (see next step).']}, 'step-3': {'title': 'Disconnecting the connectors', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1150_file2568_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1150_file2569_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1150_file2568_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1150_file2569_120.jpg'], 'tools': [], 'instructions': ['First remove the three Phillips screws from the silver cover (see figure 1). Put the screws in the same compartment of your organizer tray.2 x 1.2 mm Phillips screws1 x 1.7 mm Phillips screw (not magnetic)', 'Now you can disconnect the following three connectors (see figure 2). Be very careful.', 'Place the pointed tip of the spudger very slightly below the contact and lift it up. Make sure you don’t break off the resistors that are soldered onto the logic board. In later batches of phones, the resistors are protected by a black plastic film.LCDTouchscreenFront camera/sensor/earpiece']}, 'step-4': {'title': 'Disconnecting the battery connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1226_file2732_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1226_file2733_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1226_file2734_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1226_file2732_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1226_file2733_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1226_file2734_120.jpg'], 'tools': [], 'instructions': ['Use a Phillips screwdriver to remove the Phillips screws on the battery connector (see figure 1). Then lift the cover using the spudger (see figure 2). Put all the parts in the same compartment of the organizer tray.1 x 1.8 mm Phillips screw (funnel head)1 x 1.7 mm Phillips screw', 'Now carefully lift off the battery connector by inserting the pointed tip of the ESD spudger slightly below the connector (see figure 3). If you don’t have a spudger, you can also try using your fingernail.']}, 'step-5': {'title': 'Removing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1227_file10143_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1227_file10143_120.jpg'], 'tools': [], 'alert': 'The logic board is very sensitive. You can also lift the battery from the other side.', 'instructions': ['Now remove the battery. It’s sometimes glued firmly in place. Insert the flat end of the spudger into the space between the battery and the logic board, and carefully lift the battery.The logic board is very sensitive. You can also lift the battery from the other side.If the battery’s really stuck on, use other leverage points to the right and left of the original spot to pry it off. If you still can’t detach the battery, you can use a heat gun to slightly warm the glue from the outside and soften it.']}, 'step-6': {'title': 'Installing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1228_file2736_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1228_file2736_120.jpg'], 'tools': [], 'instructions': ['Now put the battery back in the iPhone and position it as close to the logic board as possible.', 'Click the battery connector back into place.', 'Then put the cover on and screw it in.1 x 1.8 mm Phillips screw (funnel head)1 x 1.7 mm Phillips screw']}, 'step-7': {'title': 'Attaching the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1146_file2560_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1146_file2559_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1146_file3136_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1146_file2560_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1146_file2559_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step1146_file3136_120.jpg'], 'tools': [], 'instructions': ['Now reconnect the connectors (see figure 1). The LCD connector sometimes comes undone when you connect the touchscreen connector.LCDTouchscreenFront camera/sensor/earpiece', 'Reattach the battery connector and fix the coverplate again.', 'Start your iPhone as soon as the connectors are securely attached. Check the function of the LCD, touchscreen, proximity sensor, front camera and earpiece.', 'Now attach the cover and screw it in place (see figure 2).2 x 1.2 mm Phillips screws1 x 1.7 mm Phillips screw (not magnetic)', 'Then carefully fold down the screen. Make sure that the edge of the screen where the cables are clicks into place properly. Now carefully press the screen on toward the Home button until it’s properly installed in the frame. (See figure 3).']}, 'step-8': {'title': 'Fastening the enclosure screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step1147_file2561_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step1147_file2561_120.jpg'], 'tools': [], 'instructions': ['Now screw in the two pentalobe screws at the bottom of the enclosure.2 x 3.6 mm pentalobe screws']}, 'step-9': {'title': 'Setting the time', 'media': ['https://www.idoc.eu/guides/uploads/steps/step5322_file13798_1250.jpg'], 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step5322_file13798_120.jpg'], 'tools': [], 'alert': 'When the battery is removed from the device, the iPhone loses the time and sets itself to 1:00 a.m. on 1/1/1970. You could have trouble connecting to the cellular network if the time isn’t set.', 'instructions': ['Synchronize your iPhone with iTunes or connect to a WLAN network and wait until the time is set.', 'Remove the SIM tray with the SIM card and reinsert it.', 'Activate airplane mode on the device and then deactivate airplane mode.']}}}
- Assistant
{ "description": "Welcome to the Salvation Repair guide where we're about to get your iPhone 5 back on track with a shiny new battery! If your iPhone is acting like it's had one too many energy drinks—crashing during intense marathons of use, playing a disappearing act when it's time to charge, or just being a bit too lazy on the battery life front—don’t worry, we’ve got your back. Let’s jump in and give that battery a refreshing change!" }