Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-08-06· OpenAIAi2 WildChat-4.8M (AI2)

You are a helpful assistant that generates a structured json string based on an existing…

  1. User

    You are a helpful assistant that generates a structured json string based on an existing json string containing several lists and several key value pairs. You are to output the reworded value for the key 'info' in the json repair content. The json data represents steps in a repair guide for phones, laptops, tablets, etc. value or json block to reword: Make sure it sits correctly and press it a little into place with a tool if necessary. - You need to modify and output in the same format. Do not explain. Do not introduce. ONLY output valid json. with key 'info' and the value you generate. - Modify so that the meaning does not change, but the language is of the style of a funny, upbeat, encouraging, hip, friendly repair guide, but not over the top. - modify explanations and introductions as necessary. - Do not say 'idoc', 'diva', 'This fix', 'fabulous'. Dont be overly excited, but be friendly. Do not call the tutorial 'friendly tutorial'. Its a clear concise and easy to read tutorial. This is a step by step repair guide. The repair company is Salvation Repair. any references should be directed in the form schedule a repair - Do not modify any 'media', 'title' keys or links of any kind. Do not add keys (if is a json block). do not leave out any keys (if present). Here is total json data for reference: {'category': 'iPhone Xs Repair guide', 'title': 'iPhone Xs - Replacing the Lightning connector', 'meta_duration': '90 min.', 'meta_difficulty': 'Difficult', 'meta_steps': '29 Steps', 'top_section': {'title': "Your iPhone is feeling a little sluggish – the charger won't play nice, or the microphone is on strike!", 'description': 'Is your iPhone Xs playing hard to get with charging, or does your computer seem to have forgotten your iPhone exists? No worries! Swapping out the lightning connector can get things back on track. This guide will walk you through the process step by step. Each step comes with a handy video that shows you exactly what to do—just hit the play button in the top right corner of the first image at each step. Before diving into the repair, it’s a good idea to check if it’s a software hiccup by resetting your iPhone to factory settings. And don’t forget to back up your data! When you’re working on the front camera and FaceID unit, be extra careful—those parts are tricky and can’t be replaced without losing FaceID functionality. Let’s get started!', 'tools': [{'name': 'Heat gun', 'description': 'You can use a heat gun to heat parts that are glued on so they’re easier to remove.\r\nIn most cases, you can also use a hairdryer.', 'url': 'https://www.amazon.de/s?k=Heißluftgerät&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'iFlex Opening Tool', 'description': 'Opening your smartphone can be a very delicate operation, especially if the glue is very persistent. The blade of the flexible but sturdy iFlex measures just 0.15 mm, so it fits in even the smallest gaps, such as between the screen and the frame. The practical iFlex is made of stainless steel and sits comfortably in the hand. This makes it the perfect assistant for every smartphone repair.', 'url': 'https://www.amazon.de/s?k=iFlex%20Öffnungswerkzeug&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'For storing screws', 'description': 'We recommend storing your screws so you don’t mix up the various screws and small parts.', 'url': 'https://www.amazon.de/s?k=Magnetmatte&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Tweezers', 'description': 'We recommend using tweezers to remove screws and various small parts from your device.', 'url': 'https://www.amazon.de/s?k=Piergiacomi%20Pinzette%202a%20SA%20ESD&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pick Set', 'description': 'You need a flat but stable tool such as a pick to pry out parts that are glued in place.', 'url': 'https://www.amazon.de/s?k=Plektrum-Set&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Plastic prying tool', 'description': 'You need a flat plastic prying tool to disconnect the various plugs and connectors.', 'url': 'https://www.amazon.de/s?k=Spudger&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Pentalobe PL1 screwdriver', 'description': 'You need the right screwdriver for removing pentalobe PL1 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Pentalobe%20Schraubendreher%20PL1&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Phillips PH00 screwdriver', 'description': 'You need the right screwdriver for removing PH00 screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Phillips%20Schraubendreher%20PH00&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Phillips screwdriver with centering pin', 'description': 'Phillips screwdriver with practical centering pin for logic board screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Phillips-Schraubendreher%20mit%20Zentrierstift%20PHP00&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'Y-type Y000 screwdriver', 'description': 'You need the right screwdriver for removing Y-type screws.', 'url': 'https://www.amazon.de/s?k=Wiha%20PicoFinish%20Y-Type%20Schraubendreher%20Y000&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}, {'name': 'iPhone Xs Lightning Connector Gray', 'description': '', 'url': 'https://www.amazon.de/s?k=iPhone%20Xs%20Lightning%20Connector%20Grau&rh=p_n_availability%3A-1&tag=idoc06-21&linkCode=osi'}]}, 'headline': "Let's kick things off with fixing your iPhone Xs!", 'headline_text': "If you find yourself in a pickle or have any burning questions, feel free to drop a comment. We're here to lend a hand!", 'steps': {'step-1': {'title': 'Switching off your device', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6916_file20996_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6916_file20995_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6916.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6916_file20996_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6916_file20996_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6916_file20996_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6916_file20995_120.jpg'], 'tools': [], 'instructions': ['First things first, let's power down your iPhone completely to keep it safe during the repair. Just press and hold the Standby button along with one of the volume buttons for about three seconds until you see that "Power off" slider pop up.', "Now, give that slider a gentle swipe from left to right. Your iPhone will take a moment to shut down completely, which should take around ten seconds. You're doing great!"]}, 'step-2': {'title': 'Removing the back cover screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6917_file20997_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6917.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6917_file20997_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6917_file20997_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6917_file20997_120.jpg'], 'tools': [], 'screws': ['2 × 6,8 mm Pentalobe'], 'alert': 'Once you pop the lid on your iPhone Xs, it waves goodbye to its dust and splash protection (IP 68 rating). So, handle with care!', 'instructions': ["First, let's tackle those two pentalobe screws at the bottom edge of the back cover. They’re hanging out right next to the Lightning connector, one on each side. Make sure to toss them into the same box on your magnetic pad so they don’t wander off!", 'Now, gently place your iPhone Xs on a soft, clean surface. We want to keep that back looking sharp and scratch-free!']}, 'step-3': {'title': 'Removing the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6918_file20998_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21000_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21007_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21010_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21012_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file20999_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6918.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6918_file20998_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6918_file20998_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6918_file20998_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21000_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21007_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21010_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file21012_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6918_file20999_120.jpg'], 'tools': [], 'alert': "Hey there! Just a friendly reminder: keep your tool to a maximum of 5 mm into the gap. We want to avoid any accidental damage to those tiny parts inside your iPhone. You've got this!", 'info': "If you're having trouble sliding a plectrum into that sneaky gap, no worries! Grab an iFlex to help you out. Just remember to switch to a hard plastic plectrum as soon as you can to keep your frame looking sharp and scratch-free!", 'instructions': ['To lift the front panel, you need a suction cup, a hard plastic pick and a heat gun. If the screen is severely cracked, cover all of it with packing tape before you continue.', 'The screen is glued to the frame. Use a heat gun to heat the outer edges of the display to about 60°C (140°F).', 'Place the suction cup over the Home button (if possible) or next to it. While lifting the screen with the suction cup, insert the hard plastic pick between the steel frame and the display frame and press down the steel frame.']}, 'step-4': {'title': 'Disconnecting the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6919_file21017_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21019_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21009_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21002_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6919.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6919_file21017_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6919_file21017_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6919_file21017_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21019_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21009_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6919_file21002_120.jpg'], 'tools': [], 'screws': ['1 × 1,2 mm Y-Type', '3 × 1,0 mm Y-Type', '1 × 3,7 mm Phillips', 'Battery Connector'], 'alert': "Before you get your hands dirty, make sure to disconnect the battery contact! This little step helps you dodge any short circuits and keeps your device from accidentally waking up while you're in repair mode. Safety first, right?", 'info': "Apple introduced Y-Type screws with the iPhone 7. They are often wrongly called Tri-Point or Tri-Wing. Use a matching Y-Type screwdriver for these screws so you don't strip the screw heads.", 'instructions': ['Use a Y-Type and Phillips screwdriver (Y000/PH00) to remove the screws. Then take off the bracket plate. Put all the parts in the same box of your magnetic pad.', 'Now very carefully pry off the battery contact by inserting a spudger under the connector.']}, 'step-5': {'title': 'Disconnecting the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6920_file21018_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21006_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21001_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21011_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6920.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6920_file21018_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6920_file21018_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6920_file21018_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21006_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21001_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6920_file21011_120.jpg'], 'tools': [], 'screws': ['Display Connector', 'Earpiece connector'], 'alert': 'Be very careful when prying off the connectors using the spudger to prevent damaging anything.', 'instructions': ['The display unit is connected by three flexible cables.', 'Use a spudger to separate the connectors for the display and the earpiece one by one.', "The flex cable of the earpiece is still slightly glued to the cable underneath. Loosen it by carefully pulling it off. Use hot air to help yourself if the adhesive doesn't come off."]}, 'step-6': {'title': 'Removing the lower bracket plates', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6932_file21071_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21073_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21072_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21070_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6932.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6932_file21071_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6932_file21071_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6932_file21071_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21073_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21072_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6932_file21070_120.jpg'], 'tools': [], 'screws': ['1 × 1,7 mm Phillips', '1 × 1,6 mm Phillips', '2 × 1,2 mm Phillips', '1 × 1,0 mm Y-Type'], 'instructions': ['Remove the Phillips and Y-Type screws from the two brackets. The screws have different lengths. Place them on your magnet mat so that you can reassign them later.', 'Then remove the two metal brackets. Both can be easily glued on.']}, 'step-7': {'title': 'Removing the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6934_file21078_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21079_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21080_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21081_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6934.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6934_file21078_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6934_file21078_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6934_file21078_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21079_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21080_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6934_file21081_120.jpg'], 'tools': [], 'screws': ['1 × 1,7 mm Phillips', 'Speaker connector'], 'info': 'The loudspeaker is strongly glued to the frame. To reinstall, remove any excess adhesive and make sure the adhesive is flush.', 'instructions': ['Start by loosening the lone screw on the cover plate that guards the connector for the flex cable heading to the speaker.', 'Next, gently lift off the cover plate.', "Now, disconnect the flex cable's connector and carefully lift it away.", 'You’re almost there! Lift the speaker slightly and detach the rubber strip at the top edge.', 'Finally, pull the speaker out completely.']}, 'step-8': {'title': 'Removing the Taptic Engine', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6936_file21086_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6936_file21088_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6936_file21087_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6936.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6936_file21086_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6936_file21086_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6936_file21086_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6936_file21088_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6936_file21087_120.jpg'], 'tools': [], 'screws': ['2 × 1,8 mm Phillips', 'Taptic Engine Connector'], 'instructions': ['Remove the Phillips screws fastening the Taptic Engine.', 'Use a spudger to disconnect the Taptic Engine’s connector.', 'Now remove the Taptic Engine.']}, 'step-9': {'title': 'Removing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6938_file21107_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21091_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21092_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21093_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21094_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21089_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6938.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6938_file21107_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6938_file21107_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6938_file21107_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21091_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21092_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21093_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21094_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6938_file21089_120.jpg'], 'tools': [], 'alert': 'Be super careful not to mess with those flex cables at the top and bottom edges of the battery. We want everything to stay in one piece, right?', 'info': 'If one of the adhesive strips tears, you have to pry out the battery carefully using a wide Spudger. Try to bend the battery as little as possible.', 'instructions': ["Grab your trusty tweezers or a spatula and gently peel off those black tabs. Underneath, you'll find the white adhesive strips waiting for you!", "Now, take your time and slowly pull out those adhesive strips. Keep them nice and flat, right at the level of your iPhone. You're doing awesome!", "Feel free to use your fingers to pull out the strips, or you can wrap them around your tweezers for a little extra grip. If you're curious about the best technique, check out the video (just hit that play button in the upper right corner of the first picture).", "Once you've successfully removed all the adhesive strips, it's time to say goodbye to the battery!"]}, 'step-10': {'title': 'Removing the camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6946_file21141_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21142_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21137_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21138_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21139_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6946.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6946_file21141_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6946_file21141_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6946_file21141_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21142_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21137_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21138_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6946_file21139_120.jpg'], 'tools': [], 'screws': ['1 × 1,3 mm Y-Type', '1 × 1,8 mm Phillips', 'Camera Connector'], 'instructions': ['Loosen the two screws securing the iSight camera cover plate.', 'Lift up and remove the cover plate. It is hooked into the side of the standby button.', 'Then separate the two connectors of the double camera with a spudger. Carefully lever and take care not to damage the pins on the logic board.', 'Lever out the camera with the Spudger and remove it.']}, 'step-11': {'title': 'Removing the front-facing camera and FaceID unit', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6947_file21143_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21145_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21146_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21147_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21148_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21144_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6947.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6947_file21143_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6947_file21143_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6947_file21143_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21145_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21146_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21147_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21148_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6947_file21144_120.jpg'], 'tools': [], 'screws': ['FaceTime camera', 'IR camera', 'Dot projector'], 'alert': 'Hey there! Just a heads up: be super careful with this step! A little mishap could mean saying goodbye to your FaceID function. Let’s keep that feature intact!', 'instructions': ['Gently disconnect all three connectors using your trusty Spudger.', 'Next, warm up those slightly glued flex cables and carefully pull them out from the back cover.', 'The entire front-facing camera unit is secured on both sides. Give it a little leverage and lift it out, ensuring no cables are left behind.']}, 'step-12': {'title': 'Removing the logic board', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6948_file21149_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21151_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21152_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21153_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21150_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21154_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6948.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6948_file21149_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6948_file21149_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6948_file21149_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21151_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21152_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21153_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21150_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6948_file21154_120.jpg'], 'tools': [], 'screws': ['1 × 3,6 mm Standoff', 'Connectors', '1 × 3,1 mm Phillips', '1 × 2,3 mm Phillips', 'Connectors'], 'info': "The contacts are very firmly connected to the logic board and are not easily accessible. If you can't get any further with a Spudger, you can also lever very carefully with tweezers or another thin tool.", 'instructions': ["First, let's tackle that Standoff screw and loosen the cover. Just a heads up, the bracket is hooked into one side, so keep an eye on it!", "Now, gently loosen the two contacts with your trusty spudger. Take your time, and you'll be golden!"]}, 'step-13': {'title': 'Removing the barometric vent', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6949_file21156_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6949_file21155_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6949.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6949_file21156_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6949_file21156_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6949_file21156_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6949_file21155_120.jpg'], 'tools': [], 'screws': ['1 × 2,8 mm Standoff', '1 × 2,3 mm Standoff'], 'instructions': ["Let's get those screws loosened up and say goodbye to that part! Just give them a little twist and lift it right off."]}, 'step-14': {'title': 'Removing the Lightning Connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6950_file21164_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21157_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21159_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21160_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21161_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21162_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21163_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21158_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6950.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6950_file21164_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6950_file21164_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6950_file21164_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21157_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21159_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21160_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21161_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21162_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21163_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6950_file21158_120.jpg'], 'tools': [], 'screws': ['1 × 1,1 mm Y-Type', '1 × 2,5 mm Standoff', '2 × 3,0 mm Phillips'], 'info': "Time to give that flex cable some love! Use your heat gun to gently warm it up – this'll help loosen the glue and make things super smooth. Think of it as a spa day for your phone's components!", 'instructions': ['Gently pry until you can nudge that part a bit to the side.', 'Unscrew all the Lightning Connector screws. The two longer screws that go down can be a bit tricky, so take your time!']}, 'step-15': {'title': 'Installing the lightning connector', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6966_file21249_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21250_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21251_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21252_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21253_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21248_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6966.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6966_file21249_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6966_file21249_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6966_file21249_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21250_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21251_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21252_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21253_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6966_file21248_120.jpg'], 'tools': [], 'screws': ['1 × 1,1 mm Y-Type', '1 × 2,5mm Standoff', '2 × 3,0 mm Philllips'], 'instructions': ['Alright, champ! Gently slide the Lightning Connector into its iPhone home, making sure the charging port snuggles into its spot at the bottom. Easy peasy!', 'Now, for a little cable yoga: guide the flexible cable under its buddy and then smoothly along the edge. Think of it as a tiny cable dance!', "Time to tighten things up! Screw the Lightning Connector in place, and don't forget to secure the screw for the other flexible cable on the side.", "Finally, give that microphone unit a gentle nudge against the lower edge of the housing. Tuck its little nose into the frame opening – it'll click right into place! You’re a repair rockstar!"]}, 'step-16': {'title': 'Installing the barometric cover', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6967_file21255_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6967_file21256_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6967_file21254_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6967.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6967_file21255_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6967_file21255_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6967_file21255_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6967_file21256_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6967_file21254_120.jpg'], 'tools': [], 'screws': ['1 × 2,8 mm Standoff', '1 × 2,3 mm Standoff'], 'instructions': ['Place the barometric cover in place and push it into position when screwing in.', '1 × 2,8 mm Standoff', '1 × 2,3 mm Standoff']}, 'step-17': {'title': 'Installing the logic board', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6968_file21258_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21257_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21259_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21260_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21261_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21263_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6968.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6968_file21258_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6968_file21258_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6968_file21258_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21257_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21259_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21260_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21261_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6968_file21263_120.jpg'], 'tools': [], 'screws': ['1 × 3,1 mm Phillips', '1 × 2,3 mm Phillips', '1 × 3,6 mm Standoff', 'Connectors'], 'instructions': ["First, let's make sure all those flex cables are lying nice and flat in the back cover before you pop in the logic board. Give those cables a little bend to the side so they don’t decide to throw a party under the logic board!", "Now, let’s secure that logic board by adding in the screws. You've got this!", "Next up, slide in the SIM card holder. If you run into any stiff resistance, it might be a sign that the logic board isn't seated just right.", 'Now for the fun part—connecting all the connectors! Take your time here and be gentle. Position each connector right above where it belongs on the logic board, then press down carefully until you feel them click into place. Remember, no need to force things—nobody likes to be pushed around! For those small plugs at the top, a spudger can help you give them a little nudge.', 'Finally, hook the cover plate for the two contacts on one side and screw it down. Almost there!']}, 'step-18': {'title': 'Installing the front-facing camera and FaceID unit', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6969_file21265_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21266_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21267_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21268_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21264_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6969.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6969_file21265_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6969_file21265_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6969_file21265_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21266_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21267_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21268_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6969_file21264_120.jpg'], 'tools': [], 'screws': ['FaceTime camera', 'IR camera', 'Dot projector'], 'instructions': ['Now place the assembly with FaceTime camera and infrared sensor in the device. Hook the metal brackets on both sides under until the whole module sits correctly.', 'Press the flex cables in the backcover a little bit in.', "Connect all three connectors on the logic board. If a flex cable isn't sitting properly flush, correct it again."]}, 'step-19': {'title': 'Inserting the camera', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6945_file21209_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21210_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21211_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21212_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21213_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21208_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6945.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6945_file21209_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6945_file21209_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6945_file21209_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21210_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21211_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21212_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21213_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6945_file21208_120.jpg'], 'tools': [], 'screws': ['1 × 1,3 mm Y-Type', '1 × 1,8 mm Phillips'], 'info': 'Keep those camera lenses and the inside of the camera cover squeaky clean—no dust bunnies or fingerprints allowed! A spotless view means your photos will shine bright!', 'instructions': ['Place the iSight camera back in its place and press it down.', 'Plug in the connectors of the two cameras.', 'Put the bracket plate in its place. Make sure it hooks into the side of the standby button.', 'Screw in the bracket plate using the two screws.']}, 'step-20': {'title': 'Preparing the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6939_file21097_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21098_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21099_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21100_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21096_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6939.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6939_file21097_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6939_file21097_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6939_file21097_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21098_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21099_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21100_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6939_file21096_120.jpg'], 'tools': [], 'alert': 'Get those adhesive strips ready! Stick them in the device with the protective films still on, making sure they’re pointing the right way. You’ve got this!', 'info': "When you're putting on those adhesive strips, make sure to leave a little wiggle room on both sides for the tabs to fold over. It's like giving your battery a cozy blanket!", 'instructions': ['First, peel off that big blue protective film and stick those adhesive strips right onto the bottom of the battery. Keep them nice and straight, like a well-formed line at a concert!', "Next up, remove the large pink protective film from the adhesive strips. It's like unwrapping a present—exciting, right?", "Now, fold those tabs on the sides and press them snugly against the battery. You're doing an awesome job!"]}, 'step-21': {'title': 'Inserting the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6940_file21102_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6940_file21103_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6940_file21101_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6940.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6940_file21102_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6940_file21102_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6940_file21102_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6940_file21103_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6940_file21101_120.jpg'], 'tools': [], 'info': 'Pay attention to the positioning of the battery. Orient yourself on the connector, which should be directly above the contact on the logic board. ', 'instructions': ['Place the battery back in the rear case and press it in to make it stick.']}, 'step-22': {'title': 'Installing the Taptic Engine', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6937_file21105_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21106_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21104_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21657_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6937.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6937_file21105_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6937_file21105_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6937_file21105_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21106_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21104_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6937_file21657_120.jpg'], 'tools': [], 'screws': ['2 × 1,8 mm Phillips', 'Taptic Engine Connector'], 'info': 'Make sure it sits correctly and press it a little into place with a tool if necessary.', 'instructions': ['Put the Taptic Engine back between the battery and the Lightning connector. Make sure the screw holes of the Taptic Engine sit correctly.', 'Connect the Taptic Engine’s connector.']}, 'step-23': {'title': 'Inserting the speaker', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6935_file21083_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21084_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21082_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21085_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6935.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6935_file21083_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6935_file21083_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6935_file21083_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21084_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21082_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6935_file21085_120.jpg'], 'tools': [], 'screws': ['1 × 1,7 mm Phillips', 'Speaker connector'], 'info': 'Make sure that the connector is seated correctly again.', 'instructions': ['Put the speaker back in place and push it toward the bottom so that it sticks into place.', 'Be careful not to pinch the rubber strip under the speaker.', "Then connect the speaker's connector and secure the cover plate with the single screw."]}, 'step-24': {'title': 'Installing the lower bracket plates', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6933_file21075_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21076_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21077_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21074_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6933.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6933_file21075_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6933_file21075_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6933_file21075_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21076_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21077_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6933_file21074_120.jpg'], 'tools': [], 'screws': ['1 × 1,7 mm Phillips', '1 × 1,6 mm Phillip', '2 × 1,2 mm Phillips', '1 × 1,0 mm Y-Type'], 'instructions': ['Place both brackets in place and hold them in position. The plate on the left of the charging port is above the other.', 'Then screw both covers with the Phillips and Y-Type screws.']}, 'step-25': {'title': 'Attaching a new frame sticker (optional)', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6926_file21046_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21047_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21048_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21049_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21050_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21051_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21052_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21053_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6926.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6926_file21046_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6926_file21046_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6926_file21046_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21047_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21048_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21049_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21050_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21051_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21052_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6926_file21053_120.jpg'], 'tools': [], 'alert': 'An iPhone repaired with a frame sticker will be protected against dust and spray water, but it will not be 100% waterproof!', 'info': 'In the pictures you can see iPhone X. The iPhone Xs is built in the same way and is re-glued in the same way.', 'instructions': ['To make sure that the new frame sticker will really stick, remove all glue residue and dirt from the metal frame.', 'Remove the first protective film layer of the frame sticker.', 'Position the frame sticker carefully on one edge of the frame and attach it gradually. Make sure the frame sticker is positioned evenly and press it on. You can use the plastic spudger to press the adhesive on.', 'Remove the next large protective film.', "You can leave the small protective films on for now and remove them when you've connected the display and attached the bracket plates. This prevents anything from sticking to the frame sticker before you install it. But you can also remove the films right away."]}, 'step-26': {'title': 'Connecting the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6927_file21025_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21026_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21027_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21024_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6927.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6927_file21025_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6927_file21025_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6927_file21025_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21026_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21027_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6927_file21024_120.jpg'], 'tools': [], 'screws': ['Display Connector', 'Earpiece Connector'], 'alert': "Make sure the connectors attach properly. Don't slip and bend the socket contacts on the logic board.", 'instructions': ["Place the display unit on the edge of the frame and rest it against a stable object, in order not to overstretch the sensitive flex cables. Make sure your device doesn't slide away.", 'Connect the two display connectors.', 'You might need to press down the lower of the two connectors with a spudger to make it sit properly.', 'Use tweezers to position the earpiece connector over its socket on the logic board.', 'Carefully press to attach the connector to its socket.']}, 'step-27': {'title': 'Connecting the battery', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6928_file21029_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6928_file21032_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6928_file21028_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6928.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6928_file21029_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6928_file21029_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6928_file21029_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6928_file21032_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6928_file21028_120.jpg'], 'tools': [], 'screws': ['Battery Connector', '1 × 1,2 mm Y-Type', '3 × 1,0 mm Y-Type', '1 × 3,7 mm Phillips'], 'instructions': ['Now you can connect the battery connector.', 'Then insert the bracket plate and fasten with the various screws.']}, 'step-28': {'title': 'Installing the display', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6929_file21037_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6929_file21035_1250.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6929_file21034_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6929.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6929_file21037_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6929_file21037_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6929_file21037_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6929_file21035_120.jpg', 'https://www.idoc.eu/guides/uploads/steps/step6929_file21034_120.jpg'], 'tools': [], 'instructions': ['Take the display in both hands and slowly press it down.', 'Make sure it sits properly everywhere in the frame and gradually press it down all over.']}, 'step-29': {'title': 'Fastening the back cover screws', 'media': ['https://www.idoc.eu/guides/uploads/steps/step6930_file21036_1250.jpg', 'https://www.idoc.eu/guides/uploads/videos/step6930.mp4'], 'video_thumb': 'https://www.idoc.eu/guides/uploads/steps/step6930_file21036_120.jpg', 'video_poster': 'https://www.idoc.eu/guides/uploads/steps/step6930_file21036_1250.jpg', 'thumbnails': ['https://www.idoc.eu/guides/uploads/steps/step6930_file21036_120.jpg'], 'tools': [], 'screws': ['2 × 6,8 mm Pentalobe'], 'instructions': ['Screw the two pentalobe screws to the left and right of the Lightning connector into the enclosure.']}}}

  2. Assistant
    {
      "info": "Make sure it's settled nicely, and if it needs a little nudge with your tool, go for it—just like tapping into a great groove!"
    }