Touchscreen calibration fails on Ubuntu 20.04
- User
Touchscreen calibration fails on Ubuntu 20.04
- Assistant
When you're facing touchscreen calibration issues on Ubuntu 20.04, there are several steps you can take to troubleshoot and hopefully resolve the problem:
-
Check for Updates:
- Ensure your system is up-to-date. You can do this by running:
sudo apt update sudo apt upgrade
- Ensure your system is up-to-date. You can do this by running:
-
Install Touchscreen Calibration Tools:
- You can use
xinputandxcalibrate. To install these, you may run:sudo apt install xinput x11-xserver-utils
- You can use
-
Identify Touchscreen Device:
- Use
xinputto list all input devices and identify your touchscreen:xinput list
- Use
-
Calibration with xinput-calibrator:
- If
xinput-calibratoris not already installed, you can add it:sudo apt install xinput-calibrator - Run the calibrator:
xinput_calibrator - Follow the on-screen instructions to calibrate your touchscreen.
- If
-
Manually Adjust Calibration:
- If necessary, you can adjust the calibration manually:
- Create a configuration file in
/etc/X11/xorg.conf.d/99-calibration.conf(you may need to create thexorg.conf.ddirectory) and add:Section "InputClass" Identifier "calibration" MatchProduct "<Your Touchscreen Device Name>" Option "Calibration" "min_x min_y max_x max_y" Option "SwapAxes" "0" EndSection - Replace
<Your Touchscreen Device Name>with your device's name and adjustmin_x,min_y,max_x,max_ywith your calibration values.
- Create a configuration file in
- If necessary, you can adjust the calibration manually:
-
Check for Conflicting Drivers:
- Sometimes conflicting drivers can cause issues. Ensure no conflicting drivers are installed by checking for any
evdevor other input drivers:sudo apt list --installed | grep -i "evdev"
- Sometimes conflicting drivers can cause issues. Ensure no conflicting drivers are installed by checking for any
-
Xorg Configuration:
- Ensure that no old configuration files might be interfering. Verify
/etc/X11/xorg.confand any files in/etc/X11/xorg.conf.d/if they contain inappropriate options.
- Ensure that no old configuration files might be interfering. Verify
-
Check Logs:
- Review system logs to check if there are any errors related to the touchscreen device:
cat /var/log/Xorg.0.log | grep -i "touch"
- Review system logs to check if there are any errors related to the touchscreen device:
-
Reboot:
- Sometimes, simply rebooting can fix any residual issues after installing new software or configuring settings.
If none of these steps resolve the issue, it might be worth checking the Ubuntu forums or your device manufacturer’s website for more specific guidance related to your touchscreen model.
-
- User
how to calibrate LITEK TP touchscreen ubuntu 22.04
- Assistant
Calibrating a LITEK TP touchscreen on Ubuntu 22.04 involves similar steps to other touchscreens. Below are the detailed instructions to help you with the process:
1. Install Required Tools
Firstly, make sure you have all the necessary tools to proceed with the calibration.
sudo apt update sudo apt install xinput x11-xserver-utils xinput-calibrator2. Identify Your Touchscreen Device
You need to know the exact name of your touchscreen device. Run the following command to list all input devices.
xinput listLook for entries related to your touchscreen, typically identified with names like "Touchscreen", "Pen", "Device".
3. Calibrate with xinput-calibrator
You can use xinput-calibrator to assist you with the calibration process.
-
Run the calibrator:
xinput_calibrator -
Follow the on-screen instructions to touch the points on the screen as directed.
-
After calibration, the tool will provide you with calibration data, which you need to apply.
4. Apply Calibration
You'll need to add the calibration data to your Xorg configuration.
Automatic Method
xinput-calibrator may offer to save the results automatically. If it does, accept the option and ensure the file is created as needed. If the automatic setting does not work, use the manual method.
Manual Method
-
Create a configuration file in
/etc/X11/xorg.conf.d/99-calibration.conf. You may need to create thexorg.conf.ddirectory if it doesn’t exist.sudo mkdir -p /etc/X11/xorg.conf.d/ -
Open the configuration file with a text editor:
sudo nano /etc/X11/xorg.conf.d/99-calibration.conf -
Add the following configuration, replacing placeholders with your actual data from xinput_calibrator:
Section "InputClass" Identifier "calibration" MatchProduct "Your Touchscreen Device Name" Option "Calibration" "min_x min_y max_x max_y" Option "SwapAxes" "0" # or "1" if needed EndSectionMake sure to replace
"Your Touchscreen Device Name", and the calibration valuesmin_x,min_y,max_x,max_ywith those provided byxinput_calibrator.
5. Reboot
Reboot your system to apply the changes:
sudo reboot6. Test the Calibration
Once the system has rebooted, test the touchscreen to ensure the calibration is correct. If not, you might need to tweak the settings further.
Troubleshooting
- Incorrect Calibration Values: Re-run
xinput_calibratorto verify the values. - Device Not Detected: Double-check if your device is connected properly and recognized by the system.
- Persistent Issues: Consider consulting the Ubuntu forums or the manufacturer’s support for model-specific advice.
This should hopefully solve your touchscreen calibration issue on Ubuntu 22.04 with a LITEK TP device.
-