The results of a wind tunnel test to determine the drag on a body are summarized below.…
- User
The results of a wind tunnel test to determine the drag on a body are summarized below. The upstream velocity is uniform at 100 ft/s. The static pressure is uniform everywhere. The downstream velocity distribution, which is symmetrical about the centerline, is given by u = 100 − 30 (1 −|y|/3), |y| ≤ 3 ft u = 10,0 |y| > 3 ft where u is the velocity in the x direction in ft/s, and y is the distance from the centerline in ft. Calculate the drag force per unit span on the object assuming the velocity in the y direction is zero everywhere.
- Assistant
To calculate the drag force per unit span on the object, we'll use the momentum conservation approach. Here's a step-by-step breakdown:
1. Understanding the Problem
- Upstream Velocity (( u_{\text{up}} )): 100 ft/s (uniform)
- Downstream Velocity Distribution (( u )): [ u(y) = \begin{cases} 100 - 30\left(1 - \frac{|y|}{3}\right) = 70 + 10|y| & \text{for } |y| \leq 3, \text{ft} \ 10, \text{ft/s} & \text{for } |y| > 3, \text{ft} \end{cases} ]
- Static Pressure: Uniform everywhere (no pressure difference, so pressure drag is zero)
- Velocity in ( y )-direction: Zero everywhere
2. Drag Force via Momentum Conservation
The drag force (( F_D )) per unit span can be calculated using the difference in momentum flux between the upstream and downstream regions:
[ F_D = \rho \int_{-\infty}^{\infty} (u_{\text{up}}^2 - u_{\text{down}}^2) , dy ]
Since the velocity distribution is symmetric about the centerline, we can simplify the integral from ( 0 ) to ( 3 ) ft and then double it:
[ F_D = 2\rho \int_{0}^{3} \left(100^2 - (70 + 10y)^2\right) , dy ]
3. Simplifying the Integral
Compute the integrand:
[ 100^2 - (70 + 10y)^2 = 10,000 - (4,900 + 1,400y + 100y^2) = 5,100 - 1,400y - 100y^2 ]
Now, integrate from ( 0 ) to ( 3 ) ft:
[ \int_{0}^{3} (5,100 - 1,400y - 100y^2) , dy = 5,100 \times 3 - 1,400 \times \frac{3^2}{2} - 100 \times \frac{3^3}{3} ] [ = 15,300 - 6,300 - 900 = 8,100 ]
4. Calculating the Final Drag Force
Multiply by 2 and the fluid density (( \rho )):
[ F_D = 2\rho \times 8,100 = 16,200\rho ]
Conclusion
The drag force per unit span on the object is directly proportional to the fluid density and is given by:
[ F_D = 16,!200 \times \rho ]
where ( \rho ) is the fluid density.
Final Answer:
After simplifying, the drag per unit span is 16 200 multiplied by fluid density. Thus,
Drag = 16 200 ρ