Assume the continuum approximation to define the mass density $rho(matrix(x), t)$ in an…
- User
Assume the continuum approximation to define the mass density in an arbitrary volume of fluid with velocity vector . Derive the PDE that describes conservation of momentum per unit volume . Hint: It may help to recall that the divergence of a tensor is a vector.
Please use conservation of momentum per unit volume to derive a PDE.
- Assistant
To derive the conservation of momentum for a fluid in the continuum approximation, we begin by considering the momentum per unit volume, given by the product of the mass density (\rho(\mathbf{x}, t)) and the velocity vector (\mathbf{u}(\mathbf{x}, t)). The conservation of momentum is governed by Newton's second law, which, in a continuous medium, is expressed as a partial differential equation.
The momentum per unit volume is (\rho(\mathbf{x}, t) \mathbf{u}(\mathbf{x}, t)). The rate of change of momentum in a fluid is influenced by body forces (such as gravity) and surface forces (such as pressure and viscous stresses). We express these ideas with a momentum balance equation derived from the Navier-Stokes principles:
-
Rate of Change of Momentum:
[ \frac{\partial}{\partial t} \left( \rho \mathbf{u} \right) + \nabla \cdot (\rho \mathbf{u} \mathbf{u}) ]
The first term (\frac{\partial}{\partial t} (\rho \mathbf{u})) represents the local change of momentum with time. The second term (\nabla \cdot (\rho \mathbf{u} \mathbf{u})) represents the divergence of the momentum flux due to the fluid movement.
-
Surface Forces:
(\nabla \cdot \boldsymbol{\sigma}(\mathbf{x}, t))
The term (\boldsymbol{\sigma}) is the stress tensor, which includes both pressure (p) and shear stresses. It's decomposed as (\boldsymbol{\sigma} = -p\mathbf{I} + \mathbf{T}), where (-p\mathbf{I}) is the isotropic pressure term, and (\mathbf{T}) is the deviatoric (shear) stress tensor.
-
Body Forces:
(\rho \mathbf{f})
This represents the external body forces (like gravity) per unit volume acting on the fluid.
Putting it all together, the conservation of momentum in a fluid is:
[ \frac{\partial}{\partial t} (\rho \mathbf{u}) + \nabla \cdot (\rho \mathbf{u} \mathbf{u}) = \rho \mathbf{f} + \nabla \cdot \boldsymbol{\sigma} ]
Substituting (\boldsymbol{\sigma} = -p\mathbf{I} + \mathbf{T}) into the equation, we have:
[ \frac{\partial}{\partial t} (\rho \mathbf{u}) + \nabla \cdot (\rho \mathbf{u} \mathbf{u}) = \rho \mathbf{f} - \nabla p + \nabla \cdot \mathbf{T} ]
This is the general form of the conservation of momentum for a fluid in the continuum approximation, representing the Navier-Stokes equation. It incorporates the effects of inertia, pressure, viscous stresses, and body forces.
-
- User
Consider a stationary point of given by where with boundary conditions to be deduced in part (d). For simplicity, consider the case constant.
What are conditions on for to have a minimum? Give a short mathematical justification of your answer. In this case the minimizing PDE is called elliptic.
Please use Calculus of variations and Euler–Lagrange equation to solve above questions.
- Assistant
To determine the conditions on (a), (b), and (c) for (P(u)) to have a minimum, we need to ensure that the functional (P(u)) is positive definite. This means that the integrand should be positive for any (\nabla u \neq 0).
The integrand of the functional (P(u)) is: [ F = \frac{1}{2} \left( a \left(\frac{\partial u}{\partial x}\right)^2 + 2b \frac{\partial u}{\partial x} \frac{\partial u}{\partial y} + c \left(\frac{\partial u}{\partial y}\right)^2 \right). ]
This expression can be written in a quadratic form: [ F = \frac{1}{2} \begin{pmatrix} \frac{\partial u}{\partial x} & \frac{\partial u}{\partial y} \end{pmatrix} \begin{pmatrix} a & b \ b & c \end{pmatrix} \begin{pmatrix} \frac{\partial u}{\partial x} \ \frac{\partial u}{\partial y} \end{pmatrix}. ]
For (F) to be positive definite, the matrix (\begin{pmatrix} a & b \ b & c \end{pmatrix}) must be positive definite. The conditions for a (2 \times 2) matrix to be positive definite are:
- (a > 0)
- The determinant of the matrix should also be positive: (ac - b^2 > 0).
Thus, the conditions on (a), (b), and (c) for (P(u)) to have a minimum are:
- (a > 0)
- (ac - b^2 > 0).
These conditions ensure that the quadratic form is positive for all non-zero (\mathbf{\nabla} u), thus making the functional (P(u)) positive definite and ensuring a minimum.
Justification:
- First Condition ((a > 0)): Ensures that the partial derivative term (\left(\frac{\partial u}{\partial x}\right)^2) contributes positively to the integrand.
- Second Condition ((ac - b^2 > 0)): This is related to the stability of solutions, ensuring that mixed derivative terms do not lead to an indefinite form and the overall quadratic form remains strictly positive.
In the context of PDEs, these conditions indicate that the resulting Euler-Lagrange equation leads to an elliptic PDE, which generally has well-posed boundary value problems with unique solutions under appropriate boundary conditions.