Skip to content
The Chat Archive
gpt-4o-2024-08-06· OpenAI WildChat-4.8M (AI2)

in asus motherboards bios a feature nemd: restore ac power loss. i want enable this…

  1. User

    in asus motherboards bios a feature nemd: restore ac power loss. i want enable this feature in gigabyte motherboard. can you help me?

  2. Assistant

    Certainly! If you want to enable a similar feature on a Gigabyte motherboard, you’ll typically look for a setting in the BIOS called "AC Back" or "Power On After AC Loss." This feature allows your computer to automatically power on after a power outage once power is restored.

    Here's a general guide on how to enable it:

    1. Enter BIOS Setup:

      • Reboot your computer.
      • During the boot process, press the “Delete” key (or “F2” on some models) repeatedly until you enter the BIOS setup.
    2. Navigate to Power Management Settings:

      • Look for tabs or categories like “Power Management,” “Advanced,” or “Peripherals.” The exact location can vary depending on your motherboard model.
    3. Find the AC Back/Power On After AC Loss Setting:

      • Within the power settings, look for something like “AC Back” or “Power On After AC Loss.”
      • Options might include “Off,” “On,” or “Last State.” Choose “On” if you want your computer to power up automatically, or “Last State” if you want it to return to the last power state before the loss.
    4. Save and Exit:

      • Save your changes and exit the BIOS. This is usually done by pressing “F10” and then confirming the save.

    These steps should help you enable the feature on your Gigabyte motherboard. Keep in mind that BIOS menus can vary between different motherboard models and BIOS versions, so the exact names and locations of these settings might be slightly different on your system. If you have your motherboard manual, it might also provide specific instructions.

  3. User

    in asus motherboards bios a feature nemd: restore ac power loss. i want enable this feature in gigabyte motherboard. can you help me? plz answer in persian

  4. Assistant

    البته! برای فعال کردن ویژگی مشابه در مادربرد گیگابایت، باید به BIOS بروید و دنبال گزینه‌ای به نام "AC Back" یا "Power On After AC Loss" بگردید. این ویژگی به کامپیوتر شما اجازه می‌دهد تا بعد از قطعی برق، به صورت خودکار روشن شود. در اینجا مراحل کلی برای انجام این کار آمده است:

    1. وارد BIOS شوید:

      • کامپیوتر خود را ری‌استارت کنید.
      • در طول فرایند بوت، چندین بار کلید «Delete» (یا در برخی مدل‌ها «F2») را فشار دهید تا وارد تنظیمات BIOS شوید.
    2. به تنظیمات مدیریت برق بروید:

      • به دنبال تب یا دسته‌هایی مانند "Power Management," "Advanced," یا "Peripherals" بگردید. مکان دقیق این تنظیمات ممکن است بر اساس مدل مادربرد شما متفاوت باشد.
    3. گزینه AC Back/Power On After AC Loss را پیدا کنید:

      • در قسمت تنظیمات برق، به دنبال گزینه‌ای مانند "AC Back" یا "Power On After AC Loss" بگردید.
      • گزینه‌ها ممکن است شامل "Off"، "On" یا "Last State" باشند. اگر می‌خواهید کامپیوترتان به صورت خودکار روشن شود، "On" را انتخاب کنید. اگر می‌خواهید به آخرین وضعیت قبل از قطع برق برگردد، "Last State" را انتخاب کنید.
    4. ذخیره و خروج:

      • تغییرات خود را ذخیره کنید و از BIOS خارج شوید. معمولاً با فشردن کلید «F10» و تأیید ذخیره، این کار انجام می‌شود.

    این مراحل باید به شما کمک کند تا این ویژگی را بر روی مادربرد گیگابایت خود فعال کنید. توجه داشته باشید که منوهای BIOS ممکن است بین مدل‌های مادربرد و نسخه‌های BIOS متفاوت باشند، بنابراین نام‌ها و مکان‌های دقیق این تنظیمات ممکن است در سیستم شما کمی متفاوت باشد. اگر دفترچه راهنمای مادربرد خود را دارید، ممکن است دستورالعمل‌های خاصی در آن پیدا کنید.