Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-08-06· OpenAIAi2 WildChat-4.8M (AI2)

How to specify driver to use when addin network printer by ip via powershell?

  1. User

    How to specify driver to use when addin network printer by ip via powershell?

  2. Assistant

    When adding a network printer via IP using PowerShell, you can specify the driver by using the Add-PrinterDriver and Add-PrinterPort cmdlets along with Add-Printer. Here is a step-by-step guide:

    1. Add the printer driver: Make sure the printer driver is installed on your system. If necessary, you can add it using the Add-PrinterDriver cmdlet.

      Add-PrinterDriver -Name "Your Printer Driver Name"
      
      • Replace "Your Printer Driver Name" with the exact name of your printer driver as it appears in the list of installed drivers.
    2. Create the printer port: Use Add-PrinterPort to create a TCP/IP printer port.

      Add-PrinterPort -Name "IP_192.168.1.100" -PrinterHostAddress "192.168.1.100"
      
      • Replace "192.168.1.100" with the IP address of the network printer.
      • The port name typically uses the format "IP_" followed by the printer's IP address, but you can name it anything descriptive.
    3. Add the printer: Use Add-Printer to add the printer, specifying the DriverName parameter to ensure the correct driver is used.

      Add-Printer -Name "Your Printer Name" -DriverName "Your Printer Driver Name" -PortName "IP_192.168.1.100"
      
      • Replace "Your Printer Name" with a friendly name for the printer.
      • Replace "Your Printer Driver Name" with the exact name of your printer driver as previously specified in step 1.
      • Replace "IP_192.168.1.100" with the port name you defined in step 2.

    By using these steps, you are telling PowerShell to add a network printer using a specific driver and port, ensuring the printer communicates correctly over the network. Make sure you have administrative rights to perform these actions.