explain this briefly in plain english: The training loss consistently heads down, which…
- User
explain this briefly in plain english:
The training loss consistently heads down, which is normal since neural networks rarely underfit the data. When our model trains on a specific set of data and sees the same data over and over (that’s what an epoch is: seeing all the data once), the model gets unreasonably good at predicting the right answer for the training data. That’s classic overfitting, which occurs to different degrees depending on how big your network is. We expect the training loss to always go down, so it isn’t a good source of information about how well the learning is going. But if we look at the test loss, we see that it does not consistently get better with each epoch. The test loss begins to stabilize or plateau after a certain point. If the test loss has stabilized, that would be a good time to reduce the learning rate.2 If we are already at an optimal location, reducing the learning rate will not hurt anything. If we are bouncing around a better solution, reducing the learning rate can help us improve based on the same logic we used to justify exponential decay. But now we are reducing the learning rate when doing so appears necessary based on the data, rather than based on a fixed arbitrary schedule. This is the idea behind the reduce learning rate on plateau schedule, implemented by the ReduceLROnPlateau class in PyTorch. This is also why the step function needs the last validation loss passed in as an argument in our code, which looks like lr_schedule.step(results[”val loss”][-1]). That way, the ReduceLROnPlateau class can compare the current loss to the recent history of losses. ReduceLROnPlateau has three primary arguments to control how well it works. First is patience, which tells us how many epochs of no improvement we want to see before reducing the learning rate. A value of 10 is common, as you don’t want to drop the learning rate prematurely. Instead, you want some consistent evidence that no more progress is being made before changing speed. The second argument is threshold, which defines what counts as not improving. A threshold of exactly 0 says that we are improving if there is any amount lower than the previous best loss in the past patience epochs. That might be too pedantic because the loss could be decreasing by tiny but meaningless amounts every epoch. If we use a threshold of 0.01, we are saying that the loss needs to decrease by more than 1% to count as an improvement. But that could also be a little too loose: when you train for hundreds of epochs, you could be making slow but steady progress, and reducing the learning rate is unlikely to speed up convergence. It can take some work to setting this just right, so we stick the default value of 0.0001, but this is a hyperparameter worth playing with if you want to squeeze out the maximum possible performance. 2 If the test loss starts increasing, which indicates more severe overfitting, that is another good reason to slow down learning. That helps slow the overfitting. But ideally, the test loss has stabilized.168 CHAPTER 5 Modern training techniques The last parameter is the factor by which we want to drop the learning rate η every time we determine that we have hit a plateau. This works the same way γ does for the StepLR class. Again, values in the range of 0:1 to 0:5 are all reasonable choices. But we need to recognize one critical thing before using the ReduceLROnPlateau schedule: you can’t use the test data to choose when to alter the learning rate. Doing so will cause overfitting because you are using information about the test data to make decisions and then using the test data to evaluate your results. Instead, you need to have training, validation, and testing splits. Our normal code has been using validation as the test data, which was fine because we were not looking at the validation data to make decisions while training. The process of ReduceLROnPlateau with this important detail is summarized in figure 5.10
- Assistant
When training neural networks, we often observe that the training loss—the error on the data the model is learning from—keeps decreasing. This happens because the model sees the same training data repeatedly (each pass through all the data is called an epoch), and it gets better at predicting that specific data. However, this can lead to overfitting, where the model performs well on the training data but doesn't generalize to new, unseen data.
To assess how well the model might perform on new data, we look at the validation loss (error on a separate set of data not used for training). Unlike the training loss, the validation loss doesn't always keep decreasing. After some point, it might stabilize or plateau, indicating that the model isn't improving on new data.
When the validation loss stops improving, it's a good idea to reduce the learning rate—the speed at which the model updates its parameters. A smaller learning rate allows the model to make finer adjustments, potentially finding a better solution.
This concept is implemented in the ReduceLROnPlateau scheduler in PyTorch. Here's how it works:
- Monitoring Validation Loss: The scheduler watches the validation loss after each epoch.
- Adaptive Learning Rate Reduction: If the validation loss doesn't improve for a certain number of epochs (called patience), the scheduler reduces the learning rate by a specified factor.
There are three key parameters to control this behavior:
-
Patience: How many epochs to wait after the last improvement before reducing the learning rate. For example, a patience of 10 means the scheduler waits for 10 epochs of no significant improvement.
-
Threshold: Defines what counts as a significant improvement in validation loss. A threshold of
0means any decrease is considered an improvement. A small positive threshold (like0.0001) avoids reacting to tiny, insignificant changes. -
Factor: The multiplier used to reduce the learning rate. For instance, a factor of
0.1reduces the learning rate to 10% of its current value each time it's applied.
An example code snippet might look like this:
scheduler = ReduceLROnPlateau(optimizer, patience=10, threshold=0.0001, factor=0.1) ... for epoch in range(num_epochs): train(...) val_loss = validate(...) scheduler.step(val_loss)Important Consideration:
-
Avoiding Overfitting to Validation Data: Since the scheduler uses validation loss to adjust the learning rate, it's crucial not to use the same data for final evaluation. Instead, split your data into three sets:
- Training Set: Used to train the model.
- Validation Set: Used to monitor training and make decisions like adjusting the learning rate.
- Test Set: Used only once, after training is complete, to evaluate the final model performance.
Using a separate validation set ensures that decisions made during training don't bias the final evaluation, helping the model generalize better.
In Summary:
- Training loss always decreases but isn't a good indicator of how well the model will perform on new data due to overfitting.
- Validation loss provides insight into the model's performance on unseen data.
- ReduceLROnPlateau helps improve training by reducing the learning rate when the validation loss stops improving.
- Properly splitting data into training, validation, and test sets is essential to avoid overfitting and accurately evaluate the model.