Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

I want to plot the line of the end effector and of the wrist joint given the following…

  1. User

    I want to plot the line of the end effector and of the wrist joint given the following point data: (Step 1:Import the data as lines) dataLines = Import["C:\Users\paofu\Desktop\Singularity\AlgorithmSimulation_
    O2_MoveJAbs_ConfLOff.txt", "Lines"]; (Step 2:Filter cut non-data lines) (Assume that data lines start with a number (after optional
    whitespace)
    ) dataLines = Select[dataLines, StringMatchQ[#, RegularExpression["\s*\d.*"]] &]; (Step 3:Parse each line into a list of numbers) numericalData = Map[ToExpression /@ StringSplit[StringTrim[#]] &, dataLines]; (Step 4:Extract the columns for J1 to J6) time = numericalData[[All, 1]]; (J1 to J6 are in columns 15 to 20 based on your data) jointData = numericalData[[All, 15 ;; 20]]; (Now jointData is an array containing the J1 to J6 values)

    J1 = jointData[[;; , 1]]; J1rad = ToRad[J1]; J2 = jointData[[;; , 2]]; J2rad = ToRad[J2]; J3 = jointData[[;; , 3]]; J3rad = ToRad[J3]; J4 = jointData[[;; , 4]]; J4rad = ToRad[J4]; J5 = jointData[[;; , 5]]; J5rad = ToRad[J5]; J6 = jointData[[;; , 6]]; J6rad = ToRad[J6];

    I want to see the path of the wrist point and end-effector point using the following mathematica Robot Plot function: ShowRobot[jointValues_List,linkColors_List:Automatic]:=Module[{jointVarSubstitutions,A0iallNum,oiRF0Num,RobotPlot,axesColors,axesLabels,length,frameAxes,NumberOfLinks},(Create substitutions for the joint variables) jointVarSubstitutions={q1->jointValues[[1]],q2->jointValues[[2]],q3->jointValues[[3]],q4->jointValues[[4]],q5->jointValues[[5]],q6->jointValues[[6]]}; (Substitute parameters and joint values) A0iallNum=A0iall/. params/. jointVarSubstitutions; oiRF0Num=oiRF0/. params/. jointVarSubstitutions; (Determine number of links) NumberOfLinks=Length[oiRF0Num]-1; (Set default link colors if none provided) If[linkColors===Automatic,linkColors=Table[ColorData["Rainbow"][i/(NumberOfLinks-1)],{i,0,NumberOfLinks-1}];]; (Generate the robot plot with colored cylinders) RobotPlot=Graphics3D[Table[{linkColors[[i]],Cylinder[{oiRF0Num[[i]],oiRF0Num[[i+1]]},0.015] (Adjust radius)},{i,1,NumberOfLinks}],Axes->True,BoxRatios->Automatic,PlotRange->All]; (Define colors and labels for axes) axesColors={Red,Green,Blue}; axesLabels={"X","Y","Z"}; (*Length of the coordinate axes arrows) length=0.35; (Generate the coordinate frames for each joint) frameAxes=Table[Module[{origin=oiRF0Num[[i]],R0i=A0iallNum[[i]][[1;;3,1;;3]],(Rotation matrix) arrows},arrows=Table[{axesColors[[j]],Arrow[{origin,origin+length R0i[[All,j]]}],Text[Style[axesLabels[[j]]<>ToString[i-1],FontSize->12,Bold],origin+length R0i[[All,j]]+0.05]},{j,1,3}]; Graphics3D[arrows]],{i,1,Length[oiRF0Num]}]; (Display the robot plot with all joint frames) Show[{RobotPlot,frameAxes},PlotRange->Full]] (PlotRange->{{-2,+2},{-2,+2},{0,+2.5}})

  2. Assistant

    To visualize the path of the wrist point and end-effector point, you'll need to compute their positions at each time step based on your joint angle data and then plot their trajectories. Here's how you can do it:

    Assumptions:

    • A0iall and oiRF0 are defined elsewhere in your code as the homogeneous transformation matrices and position vectors for your robot, respectively.
    • params is a list of your robot's physical parameters (link lengths, offsets, etc.).

    Step 1: Compute Positions Over Time

    First, we'll compute the positions of the wrist point and end-effector point for each set of joint angles in your data.

    (* Prepare empty lists to store positions *)
    wristPositions = {};
    endEffectorPositions = {};
    
    (* Total number of time steps *)
    nSteps = Length[J1rad];
    
    (* Loop over all time steps *)
    Do[
      (* Get joint values at this time step *)
      jointValues = {J1rad[[i]], J2rad[[i]], J3rad[[i]], J4rad[[i]], J5rad[[i]], J6rad[[i]]};
      
      (* Substitute joint values into symbolic expressions *)
      jointVarSubstitutions = {
        q1 -> jointValues[[1]],
        q2 -> jointValues[[2]],
        q3 -> jointValues[[3]],
        q4 -> jointValues[[4]],
        q5 -> jointValues[[5]],
        q6 -> jointValues[[6]]
      };
      
      (* Compute numerical transformation matrices and positions *)
      A0iallNum = A0iall /. params /. jointVarSubstitutions;
      oiRF0Num = oiRF0 /. params /. jointVarSubstitutions;
      
      (* Extract the wrist and end-effector positions *)
      wristPoint = oiRF0Num[[-2]];          (* Second to last point *)
      endEffectorPoint = oiRF0Num[[-1]];    (* Last point *)
      
      (* Collect the positions *)
      AppendTo[wristPositions, wristPoint];
      AppendTo[endEffectorPositions, endEffectorPoint];
      ,
      {i, nSteps}
    ];
    

    Step 2: Plot the Paths of the Wrist and End-Effector

    Now that we have the positions, we can plot their paths in 3D space.

    Graphics3D[
      {
        Red, Thick, Line[wristPositions],
        Blue, Thick, Line[endEffectorPositions]
      },
      Axes -> True,
      AxesLabel -> {"X", "Y", "Z"},
      BoxRatios -> {1, 1, 1},
      PlotLabel -> "Paths of Wrist (Red) and End-Effector (Blue)"
    ]
    

    Optional: Animate the Robot Moving Along the Path

    If you want to see the robot moving along the path, you can create an animation.

    (* Create frames for the animation *)
    frames = Table[
      Show[
        ShowRobot[{J1rad[[i]], J2rad[[i]], J3rad[[i]], J4rad[[i]], J5rad[[i]], J6rad[[i]]}],
        Graphics3D[
          {
            Red, PointSize[Large], Point[wristPositions[[i]]],
            Blue, PointSize[Large], Point[endEffectorPositions[[i]]],
            Red, Thick, Line[Take[wristPositions, i]],
            Blue, Thick, Line[Take[endEffectorPositions, i]]
          }
        ]
      ],
      {i, 1, nSteps, 10}  (* Adjust the step size for fewer frames *)
    ];
    
    (* Create an animation *)
    ListAnimate[frames]
    

    Notes:

    • Adjusting for Large Data Sets: If your data set is large, consider increasing the step size in the Table to reduce the number of frames in the animation.
    • Including the Robot Model: The ShowRobot function is used to plot the robot at each time step. Ensure that all necessary variables and functions (A0iall, oiRF0, params, etc.) are properly defined and accessible within your scope.
    • Link Colors in ShowRobot: If you wish to customize the link colors, you can pass a list of colors to the ShowRobot function.

    Additional Visualization: Plotting in Separate Plots

    If you prefer to see the wrist and end-effector paths in separate plots:

    (* Plot for Wrist Point *)
    wristPlot = Graphics3D[
      {
        Red, Thick, Line[wristPositions]
      },
      Axes -> True,
      AxesLabel -> {"X", "Y", "Z"},
      BoxRatios -> {1, 1, 1},
      PlotLabel -> "Path of Wrist Point"
    ];
    
    (* Plot for End-Effector Point *)
    endEffectorPlot = Graphics3D[
      {
        Blue, Thick, Line[endEffectorPositions]
      },
      Axes -> True,
      AxesLabel -> {"X", "Y", "Z"},
      BoxRatios -> {1, 1, 1},
      PlotLabel -> "Path of End-Effector Point"
    ];
    
    (* Display both plots *)
    GraphicsRow[{wristPlot, endEffectorPlot}]
    

    Troubleshooting:

    • Undefined Variables: Ensure that all variables (A0iall, oiRF0, params, q1, ..., q6) are defined in your environment.
    • Data Consistency: Verify that the joint angle arrays (J1rad to J6rad) are all the same length and correspond to each time step.

    Complete Code Block:

    Here's the complete code combining all the steps:

    (* --- Your existing code to import and process data --- *)
    (* Step 1 to Step 3 from your question *)
    
    (* Assuming J1rad to J6rad are already defined as lists of joint angles in radians *)
    
    (* --- Step 1: Compute Positions Over Time --- *)
    wristPositions = {};
    endEffectorPositions = {};
    
    nSteps = Length[J1rad];
    
    Do[
      jointValues = {J1rad[[i]], J2rad[[i]], J3rad[[i]], J4rad[[i]], J5rad[[i]], J6rad[[i]]};
      jointVarSubstitutions = {
        q1 -> jointValues[[1]],
        q2 -> jointValues[[2]],
        q3 -> jointValues[[3]],
        q4 -> jointValues[[4]],
        q5 -> jointValues[[5]],
        q6 -> jointValues[[6]]
      };
      A0iallNum = A0iall /. params /. jointVarSubstitutions;
      oiRF0Num = oiRF0 /. params /. jointVarSubstitutions;
      
      wristPoint = oiRF0Num[[-2]];
      endEffectorPoint = oiRF0Num[[-1]];
      
      AppendTo[wristPositions, wristPoint];
      AppendTo[endEffectorPositions, endEffectorPoint];
      ,
      {i, nSteps}
    ];
    
    (* --- Step 2: Plot the Paths --- *)
    Graphics3D[
      {
        Red, Thick, Line[wristPositions],
        Blue, Thick, Line[endEffectorPositions]
      },
      Axes -> True,
      AxesLabel -> {"X", "Y", "Z"},
      BoxRatios -> Automatic,
      PlotLabel -> "Paths of Wrist (Red) and End-Effector (Blue)"
    ]
    
    (* --- Optional Animation --- *)
    frames = Table[
      Show[
        ShowRobot[{J1rad[[i]], J2rad[[i]], J3rad[[i]], J4rad[[i]], J5rad[[i]], J6rad[[i]]}],
        Graphics3D[
          {
            Red, PointSize[Large], Point[wristPositions[[i]]],
            Blue, PointSize[Large], Point[endEffectorPositions[[i]]],
            Red, Thick, Line[Take[wristPositions, i]],
            Blue, Thick, Line[Take[endEffectorPositions, i]]
          }
        ]
      ],
      {i, 1, nSteps, 10}
    ];
    
    ListAnimate[frames]
    

    By following these steps, you should be able to visualize the paths of both the wrist point and the end-effector point based on your joint data.