переписать код, но вместо countsbypolynomial используется mpi, который в каждом процессе…
- User
переписать код, но вместо counts_by_polynomial используется mpi, который в каждом процессе ищет количество собственных значений для своих интервалов (количество интервалов делится на процессы и интервалы последовательно берутся) и собирает результат в конце
import numpy as np import matplotlib.pyplot as plt import pandas as pd
def create_jacobi_matrix(n, c1, c2, b): c = np.array([c1 if i % 2 == 0 else c2 for i in range(n)]) b = np.full(n-1, b) return np.diag(c) + np.diag(b, k=1) + np.diag(b, k=-1)
def compute_eigenvalues(matrix): eigenvalues, _ = np.linalg.eig(matrix) return np.sort(eigenvalues)
def eigenvalue_intervals(eigenvalues, n_intervals): min_eigenvalue = np.min(eigenvalues) max_eigenvalue = np.max(eigenvalues) step = (max_eigenvalue - min_eigenvalue) / n_intervals return min_eigenvalue - step, max_eigenvalue + step, step
def find_eigenvalue_counts(eigenvalues, interval_start, interval_end, step): counts = [] interval_edges = np.arange(interval_start, interval_end, step) for i in range(len(interval_edges) - 1): left = interval_edges[i] right = interval_edges[i + 1] count = np.sum((eigenvalues >= left) & (eigenvalues < right)) counts.append(count) return counts, interval_edges
def plot_eigenvalue_histogram(counts1, counts2, edges): plt.figure(figsize=(12, 6)) bar_width = edges[1] - edges[0] centres = (edges[:-1] + edges[1:]) / 2 plt.bar(centres, counts1, width=bar_width, color='peachpuff', edgecolor='k', label='From polynomial') plt.bar(centres, -np.array(counts2), width=bar_width, color='mediumpurple', edgecolor='k', label='Directly counted') plt.xlabel('Interval') plt.ylabel('Count of Eigenvalues') plt.title('Eigenvalue Counts in Intervals') plt.xticks(edges, rotation=45) plt.grid(axis='x', linestyle='--', alpha=0.7) plt.legend() plt.show()
def create_table(interval_edges, counts1, counts2): intervals = [f"({interval_edges[i]:.2f}, {interval_edges[i+1]:.2f})" for i in range(len(interval_edges) - 1)] data = { 'Interval': intervals, 'Count from Polynomial': counts1, 'Direct Count': counts2 } df = pd.DataFrame(data) print(df)
Параметры для матрицы Якоби
n = 100 c1 = 12 c2 = 7 b = 15
A = create_jacobi_matrix(n, c1, c2, b) eigenvalues = compute_eigenvalues(A)
left, right, step = eigenvalue_intervals(eigenvalues, 20)
counts_direct, interval_edges = find_eigenvalue_counts(eigenvalues, left, right, step) counts_by_polynomial = np.diff(np.searchsorted(eigenvalues, interval_edges))
plot_eigenvalue_histogram(counts_by_polynomial, counts_direct, interval_edges) create_table(interval_edges, counts_by_polynomial, counts_direct)
print(compute_eigenvalues(A))
- Assistant
To use the Message Passing Interface (MPI) for parallel processing, you'll need to make use of an external Python package like
mpi4py. Below is the revised code where mpi4py is utilized to parallelize the computation of eigenvalue counts across processes. Each process is responsible for a sub-range of intervals, and the results are gathered at the end.First, ensure you have
mpi4pyinstalled on your system. You can install it via pip:pip install mpi4pyHere's how you can modify your code to incorporate MPI:
from mpi4py import MPI import numpy as np import matplotlib.pyplot as plt import pandas as pd def create_jacobi_matrix(n, c1, c2, b): c = np.array([c1 if i % 2 == 0 else c2 for i in range(n)]) b = np.full(n-1, b) return np.diag(c) + np.diag(b, k=1) + np.diag(b, k=-1) def compute_eigenvalues(matrix): eigenvalues, _ = np.linalg.eig(matrix) return np.sort(eigenvalues) def eigenvalue_intervals(eigenvalues, n_intervals): min_eigenvalue = np.min(eigenvalues) max_eigenvalue = np.max(eigenvalues) step = (max_eigenvalue - min_eigenvalue) / n_intervals return min_eigenvalue - step, max_eigenvalue + step, step def find_eigenvalue_counts_mpi(eigenvalues, interval_start, interval_end, step): interval_edges = np.arange(interval_start, interval_end, step) counts = np.zeros(len(interval_edges) - 1, dtype=int) comm = MPI.COMM_WORLD rank = comm.Get_rank() size = comm.Get_size() # Determine the ranges each process will handle local_n = len(interval_edges) // size start = rank * local_n end = start + local_n if rank != size - 1 else len(interval_edges) - 1 for i in range(start, end): left = interval_edges[i] right = interval_edges[i + 1] counts[i] = np.sum((eigenvalues >= left) & (eigenvalues < right)) # Gathering counts from all processes total_counts = None if rank == 0: total_counts = np.zeros_like(counts) comm.Reduce(sendbuf=counts, recvbuf=total_counts, op=MPI.SUM, root=0) return total_counts, interval_edges def plot_eigenvalue_histogram(counts1, counts2, edges): plt.figure(figsize=(12, 6)) bar_width = edges[1] - edges[0] centres = (edges[:-1] + edges[1:]) / 2 plt.bar(centres, counts1, width=bar_width, color='peachpuff', edgecolor='k', label='From polynomial') plt.bar(centres, -np.array(counts2), width=bar_width, color='mediumpurple', edgecolor='k', label='Directly counted') plt.xlabel('Interval') plt.ylabel('Count of Eigenvalues') plt.title('Eigenvalue Counts in Intervals') plt.xticks(edges, rotation=45) plt.grid(axis='x', linestyle='--', alpha=0.7) plt.legend() plt.show() def create_table(interval_edges, counts1, counts2): intervals = [f"({interval_edges[i]:.2f}, {interval_edges[i+1]:.2f})" for i in range(len(interval_edges) - 1)] data = { 'Interval': intervals, 'Count from Polynomial': counts1, 'Direct Count': counts2 } df = pd.DataFrame(data) print(df) def main(): # Параметры для матрицы Якоби n = 100 c1 = 12 c2 = 7 b = 15 A = create_jacobi_matrix(n, c1, c2, b) eigenvalues = compute_eigenvalues(A) left, right, step = eigenvalue_intervals(eigenvalues, 20) # Perform MPI computation counts_direct, interval_edges = find_eigenvalue_counts_mpi(eigenvalues, left, right, step) # Count using polynomial as previously done (unparallelized part) counts_by_polynomial = np.diff(np.searchsorted(eigenvalues, interval_edges)) # Rank 0 generates the output and plots comm = MPI.COMM_WORLD if comm.Get_rank() == 0: plot_eigenvalue_histogram(counts_by_polynomial, counts_direct, interval_edges) create_table(interval_edges, counts_by_polynomial, counts_direct) print(compute_eigenvalues(A)) if __name__ == "__main__": main()Run the script using
mpiexecormpirunto utilize multiple processes. Here is an example command:mpiexec -n 4 python script_name.pyReplace
script_name.pywith the actual file name of your script. This command runs the script with 4 processes. Adjust the-nargument based on your system's capability and desired parallelization level. - User
'mpiexec' is not recognized as an internal or external command, operable program or batch file.
- Assistant
The error message indicates that your system cannot find the
mpiexeccommand, which is typically used to execute MPI programs. This is common when MPI is not installed or not added to your system's PATH.Here's how you can resolve this:
Step 1: Install MPI
-
Windows:
- Install Microsoft MPI (MS-MPI). You can download it from the Microsoft Download Center.
- During installation, select the option to add MPI to the system PATH.
-
Linux:
- You can install Open MPI using a package manager:
sudo apt-get install openmpi-bin openmpi-common libopenmpi-dev # Debian/Ubuntu sudo yum install openmpi openmpi-devel # CentOS/RHEL - Make sure Open MPI’s
bindirectory is added to your PATH, which is usually done automatically.
- You can install Open MPI using a package manager:
-
macOS:
- Use Homebrew to install Open MPI:
brew install open-mpi
- Use Homebrew to install Open MPI:
Step 2: Add MPI to the System PATH
If your MPI installation did not add its executables to your PATH, you may need to do this manually:
-
Windows:
- Find where MS-MPI is installed (usually
C:\Program Files\Microsoft MPI\Bin\). - Add this path to your system's PATH environment variable:
- Right-click on "This PC" or "Computer" on your desktop or in File Explorer.
- Click "Properties."
- Click "Advanced system settings."
- Click "Environment Variables."
- In the "System variables" section, find the "Path" variable, select it, and click "Edit."
- Add the MPI path to the list of paths.
- Find where MS-MPI is installed (usually
-
Linux/macOS:
- Add the Open MPI
bindirectory to your PATH by editing your shell configuration file (e.g.,.bashrc,.zshrc):export PATH="$PATH:/path/to/openmpi/bin" - Replace
/path/to/openmpi/binwith the actual installation path, and then reload the configuration file:source ~/.bashrc # or source ~/.zshrc
- Add the Open MPI
Step 3: Verify Installation
To verify that
mpiexecis correctly installed and available, open a new command prompt or terminal and type:mpiexec --versionThis should display the version of MPI installed on your system.
Step 4: Run Your Script
Once
mpiexecis recognized, you can run your MPI-enabled Python script using:mpiexec -n 4 python script_name.pyReplace
script_name.pywith the actual name of your Python script.By following these steps, your system should be properly configured to recognize and execute MPI applications.
-
- User
в этом коде и на графике и в таблице вместо counts_by_polynomial вывести посчитаное с помощью mpi, counts_by_polynomial вообще убрать
from mpi4py import MPI import numpy as np import matplotlib.pyplot as plt import pandas as pd
def create_jacobi_matrix(n, c1, c2, b): c = np.array([c1 if i % 2 == 0 else c2 for i in range(n)]) b = np.full(n-1, b) return np.diag(c) + np.diag(b, k=1) + np.diag(b, k=-1)
def compute_eigenvalues(matrix): eigenvalues, _ = np.linalg.eig(matrix) return np.sort(eigenvalues)
def eigenvalue_intervals(eigenvalues, n_intervals): min_eigenvalue = np.min(eigenvalues) max_eigenvalue = np.max(eigenvalues) step = (max_eigenvalue - min_eigenvalue) / n_intervals return min_eigenvalue - step, max_eigenvalue + step, step
def find_eigenvalue_counts_mpi(eigenvalues, interval_start, interval_end, step): interval_edges = np.arange(interval_start, interval_end, step) counts = np.zeros(len(interval_edges) - 1, dtype=int)
comm = MPI.COMM_WORLD rank = comm.Get_rank() size = comm.Get_size() # Determine the ranges each process will handle local_n = len(interval_edges) // size start = rank * local_n end = start + local_n if rank != size - 1 else len(interval_edges) - 1 for i in range(start, end): left = interval_edges[i] right = interval_edges[i + 1] counts[i] = np.sum((eigenvalues >= left) & (eigenvalues < right)) # Gathering counts from all processes total_counts = None if rank == 0: total_counts = np.zeros_like(counts) comm.Reduce(sendbuf=counts, recvbuf=total_counts, op=MPI.SUM, root=0) return total_counts, interval_edgesdef plot_eigenvalue_histogram(counts1, counts2, edges): plt.figure(figsize=(12, 6)) bar_width = edges[1] - edges[0] centres = (edges[:-1] + edges[1:]) / 2 plt.bar(centres, counts1, width=bar_width, color='peachpuff', edgecolor='k', label='From polynomial') plt.bar(centres, -np.array(counts2), width=bar_width, color='mediumpurple', edgecolor='k', label='Directly counted') plt.xlabel('Interval') plt.ylabel('Count of Eigenvalues') plt.title('Eigenvalue Counts in Intervals') plt.xticks(edges, rotation=45) plt.grid(axis='x', linestyle='--', alpha=0.7) plt.legend() plt.show()
def create_table(interval_edges, counts1, counts2): intervals = [f"({interval_edges[i]:.2f}, {interval_edges[i+1]:.2f})" for i in range(len(interval_edges) - 1)] data = { 'Interval': intervals, 'Count from Polynomial': counts1, 'Direct Count': counts2 } df = pd.DataFrame(data) print(df)
def main(): # Параметры для матрицы Якоби n = 100 c1 = 12 c2 = 7 b = 15
A = create_jacobi_matrix(n, c1, c2, b) eigenvalues = compute_eigenvalues(A) left, right, step = eigenvalue_intervals(eigenvalues, 20) # Perform MPI computation counts_direct, interval_edges = find_eigenvalue_counts_mpi(eigenvalues, left, right, step) # Count using polynomial as previously done (unparallelized part) counts_by_polynomial = np.diff(np.searchsorted(eigenvalues, interval_edges)) # Rank 0 generates the output and plots comm = MPI.COMM_WORLD if comm.Get_rank() == 0: plot_eigenvalue_histogram(counts_by_polynomial, counts_direct, interval_edges) create_table(interval_edges, counts_by_polynomial, counts_direct) print(compute_eigenvalues(A))if name == "main": main()
- Assistant
Here's how you can modify the code to remove the use of
counts_by_polynomialand use only the computed MPI counts in both the plot and the table. The changes primarily involve replacingcounts1in the histogram and table functions with the MPI-computedcounts_direct:from mpi4py import MPI import numpy as np import matplotlib.pyplot as plt import pandas as pd def create_jacobi_matrix(n, c1, c2, b): c = np.array([c1 if i % 2 == 0 else c2 for i in range(n)]) b = np.full(n-1, b) return np.diag(c) + np.diag(b, k=1) + np.diag(b, k=-1) def compute_eigenvalues(matrix): eigenvalues, _ = np.linalg.eig(matrix) return np.sort(eigenvalues) def eigenvalue_intervals(eigenvalues, n_intervals): min_eigenvalue = np.min(eigenvalues) max_eigenvalue = np.max(eigenvalues) step = (max_eigenvalue - min_eigenvalue) / n_intervals return min_eigenvalue - step, max_eigenvalue + step, step def find_eigenvalue_counts_mpi(eigenvalues, interval_start, interval_end, step): interval_edges = np.arange(interval_start, interval_end, step) counts = np.zeros(len(interval_edges) - 1, dtype=int) comm = MPI.COMM_WORLD rank = comm.Get_rank() size = comm.Get_size() # Determine the ranges each process will handle local_n = len(interval_edges) // size start = rank * local_n end = start + local_n if rank != size - 1 else len(interval_edges) - 1 for i in range(start, end): left = interval_edges[i] right = interval_edges[i + 1] counts[i] = np.sum((eigenvalues >= left) & (eigenvalues < right)) # Gathering counts from all processes total_counts = None if rank == 0: total_counts = np.zeros_like(counts) comm.Reduce(sendbuf=counts, recvbuf=total_counts, op=MPI.SUM, root=0) return total_counts, interval_edges def plot_eigenvalue_histogram(counts, edges): plt.figure(figsize=(12, 6)) bar_width = edges[1] - edges[0] centres = (edges[:-1] + edges[1:]) / 2 plt.bar(centres, counts, width=bar_width, color='mediumpurple', edgecolor='k', label='Eigenvalues Counted') plt.xlabel('Interval') plt.ylabel('Count of Eigenvalues') plt.title('Eigenvalue Counts in Intervals') plt.xticks(edges, rotation=45) plt.grid(axis='x', linestyle='--', alpha=0.7) plt.legend() plt.show() def create_table(interval_edges, counts): intervals = [f"({interval_edges[i]:.2f}, {interval_edges[i+1]:.2f})" for i in range(len(interval_edges) - 1)] data = { 'Interval': intervals, 'Eigenvalue Count': counts } df = pd.DataFrame(data) print(df) def main(): # Параметры для матрицы Якоби n = 100 c1 = 12 c2 = 7 b = 15 A = create_jacobi_matrix(n, c1, c2, b) eigenvalues = compute_eigenvalues(A) left, right, step = eigenvalue_intervals(eigenvalues, 20) # Perform MPI computation counts_direct, interval_edges = find_eigenvalue_counts_mpi(eigenvalues, left, right, step) # Rank 0 generates the output and plots comm = MPI.COMM_WORLD if comm.Get_rank() == 0: plot_eigenvalue_histogram(counts_direct, interval_edges) create_table(interval_edges, counts_direct) print(compute_eigenvalues(A)) if __name__ == "__main__": main()Key Changes:
-
Function
plot_eigenvalue_histogram:- Removed
counts1andcounts2, now it takes a singlecountsargument which comes from the MPI calculation.
- Removed
-
Function
create_table:- Adjusted the data dictionary to only include the
countsfrom MPI.
- Adjusted the data dictionary to only include the
-
Main Function:
- Directly using
counts_directfor plotting and table creation, eliminating any reference tocounts_by_polynomial.
- Directly using
This code will now compute the number of eigenvalues in each interval using MPI and visualize and tabulate the results based on this parallel computation alone.
-