i want you to comprare of the solutions and parameters each one of the these three book…
- User
i want you to comprare of the solutions and parameters each one of the these three book solving " Roskam تعیین ضریب بالابری در لحظه برخاست (C_{L_{\mathrm{OF}}})
C_{L_{\mathrm{OF}}}=\frac{C_{L_{\mathrm{max}}}}{\left(\frac{V_{\mathrm{LOF}}}{V_S}\right)^2}=\frac{1.69}{{1.15}^2}=1.28
ضریب بالابری در طول حرکت بر روی زمین (خارج از اثر زمین)
[C_{L\left(\mathrm{out\ of\ ground\ effect}\right)}=0.83]ارائه شده
ضریب بالابری در طول حرکت بر روی زمین (در اثر زمین)
C_{L_g}=0.89 C_{L_g}=\frac{C_L}{1+\frac{b}{2h}} ضریب درگ در طول حرکت بر روی زمین (خارج از اثر زمین)
C_D=0.0620+\frac{C_{L\left(\mathrm{out\ of\ ground\ effect}\right)}^2}{\pi A e}=0.0620+\frac{{0.83}^2}{\pi\times7\times0.80}=0.1012
محاسبات اثر زمین ارتفاع از خط میانه کورد هندسی، (\ h\ =\ 3.6\ ) فوت
\frac{h}{b}=\frac{3.6}{35}=0.103 [\ \sigma=\ 0.48 ] (عامل اثر زمین از شکل) تغییر در ضریب درگ به علت اثر زمین،
\Delta C_{D_i}=-\sigma\frac{C_{L_g}^2}{\pi A}=-0.48\frac{{0.89}^2}{\pi\times7}=-0.0150
ضریب درگ در اثر زمین، C_{D_g}=C_D\left(\mathrm{out\ of\ ground\ effect}\right)+\Delta C_{D_i}=0.1012-0.0150=0.0862
تعیین (C_D-\mu_gC_L) [C_D-\mu_gC_L=0.0862-0.03\times0.89=0.0595]
سرعت استال \left(V_S\right)
V_S=\sqrt{\frac{2W}{\rho S C_{L_{\mathrm{max}}}}}=114.4\mathrm{\ فوت بر ثانیه=67.8 گره
سرعت برخاست (V_{\mathrm{LOF}}) [V_{\mathrm{LOF}}=1.15V_S=1.15\times114.4=131.6\mathrm{\ فوت بر ثانیه=77.9 گره]
فشارهای دینامیکی
فشار دینامیکی در لحظه برخاست، [q_{\mathrm{LOF}}=0.5\rho V_{\mathrm{LOF}}^2=20.6\mathrm{\ پوند بر فوت مربع]
سرعت چرخش، [V_R=1.10V_S=125.8\mathrm{\ فوت بر ثانیه=74.5 گره]
فشار دینامیکی در سرعت چرخش، [q_R=0.5\rho V_R^2=18.8\mathrm{\ پوند بر فوت مربع]
شتابهای برخاست
شتاب در طول حرکت بر روی زمین (شرایط نیروی پیشران اولیه)، [a_{g_{V=0}}=g\left[\frac{T}{W}-\mu_g\right]-\frac{C_{D_0}-\mu_gC_L}{q_0S/W}=12.9\mathrm{\ فوت بر ثانیه2]
شتاب در طول حرکت بر روی زمین (شرایط نیروی پیشران هنگام چرخش)، [a_{g_{V=V_R}}=g\left[\frac{T}{W}-\mu_g\right]-\frac{C_D-\mu_gC_L}{q_RS/W}=6.1\mathrm{\ فوت بر ثانیه2]
فاصله رول روی زمین \left(S_{\mathrm{NGR}}\right)
نسبت شتابها،
[k=\frac{a_{g_{V=V_R}}}{a_{g_{V=0}}}=0.7]
شتاب میانگین،
[a_{g_{\mathrm{ave}}}=a_{g_{V=0}}\times\frac{1+k}{2}=9.1\mathrm{\ فوت بر ثانیه2]
فاصله رول روی زمین، [S_{\mathrm{NGR}}=\frac{V_R^2}{2a_{g_{\mathrm{ave}}}}=870\mathrm{\ فوت]
فاصله چرخش (S_R)
[S_R=V_R\times t_{\mathrm{rotate}}=125.8\times1=129\mathrm{\ فوت]بافرض(trotate=1 ثانیه)
محاسبات انتقال تغییر در ضریب بالابری در طول انتقال،
[\Delta C_L=\frac{1}{2}\left[\left(\frac{V_{\mathrm{LOF}}}{V_S}\right)^2-1\right]\left[C_{L_{{\mathrm{max}}{\mathrm{TO}}}}\left(\frac{V_S}{V{\mathrm{LOF}}}\right)^2-0.53+0.38\right]]
شعاع انتقال، [R_{TR}=2\left(\frac{W}{S}\right)\frac{1}{\rho g\Delta C_L}]
محاسبات صعود ارتفاع صعود در طول انتقال،
[h_{TR}=R_{TR}\times\left(1-\cos{\theta_{CL}}\right)=47\mathrm{\ فوت] ارتفاع صفحه نمایش،
[S_{CL}=\frac{h_{\mathrm{screen}}-h_{TR}}{\tan{\theta_{CL}}}=23\mathrm{\ فوت] فاصله کل برخاست \left(S_{\mathrm{TO}}\right)
[S_{\mathrm{TO}}=S_{\mathrm{NGR}}+S_R+S_{TR}+S_{CL}=870+129+732+23=1,754\mathrm{\ فوت]
محاسبات زمان برخاست زمان برای رول روی زمین،
[t_{\mathrm{NGR}}=\frac{V_R}{a_{g_{\mathrm{ave}}}}=15.4\mathrm{\ ثانیه] زمان برای چرخش، [t_R=1\mathrm{\ ثانیه]ارائهشده
زمان برای انتقال و صعود به ارتفاع صفحه نمایش، t_{TR}=\frac{S_{TR}}{V_{LOF}} t_{CL}=\frac{2S_{CL}}{V_{LOF}+V_2}\emsp
[t_{TR}=5.6\mathrm{\ ثانیه] [t_{CL}=0.2\mathrm{\ ثانیه] زمان کل برخاست، [t_{\mathrm{TO}}=t_{\mathrm{NGR}}+t_R+t_{TR}+t_{CL}=15.4+1+5.6+0.2=22.2\mathrm{\ ثانیه] Young نیروی رانش در طول برخاست: نیروی رانش در سرعت ( V = 0 ) (( T_{V=0} )): ۲,۰۰۰ پوند نیروی رانش در سرعت ( V=V_R ) (( T_{V=V_R} )): ۱,۲۰۰ پوند برآورد ضریب مقاومت بدون لیفت (( \mathbit{C}{\mathbit{D}\mathbf{0}} )) فرمول:
C_{D_0}=C_{D_{\mathrm{clean}}}+\Delta C_{D_{\mathrm{slats}}}+\Delta C_{D_{\mathrm{flaps}}}+\Delta C_{D_{\mathrm{gear}}}\bigm فرضیات و برآوردها: ( C_{D_{\mathrm{clean}}} ): معمولاً بین ۰.۰۲ تا ۰.۰۳ (از ۰.۰۲۵ استفاده میکنیم) ( \Delta C_{D_{\mathrm{slats}}} ): افزایش کوچک ۰.۰۰۲ ( \Delta C_{D_{\mathrm{flaps}}} ): برای انحراف فلپ ۱۵ درجه، تقریباً ۰.۰۲ ( \Delta C_{D_{\mathrm{gear}}} ): با باز شدن چرخها، معمولاً حدود ۰.۰۰۵ محاسبه:
C_{D_0}=0.025+0.002+0.02+0.005=0.052\bigm با توجه به دادههای شما (( C_{D_0}=0.0620 )) و تغییرات ممکن، نتیجه قابل قبول است:
C_{D_0}\approx0.06\bigm
گام ۳: محاسبه سرعت پرتاب (( \mathbit{V}_\mathbit{S})) فرمول:
V_S=\sqrt{\frac{2W}{\rho S C_{L_{\mathrm{max}}}}}\bigm دادهها: ( W\ =\ 4,600\ ) پوند ( \rho=\ 0.0023769 ) اسلاگ/فوت³ ( S\ =\ 175 ) فوت² ( C_{L_{\mathrm{max}}}=1.69 ) محاسبه:
V_S=\sqrt{\frac{2\times4,600}{0.0023769\times175\times1.69}}=\sqrt{\frac{9,200}{0.70609}}=\sqrt{13,034.1}\approx114.2,\mathrm{فوت/ثانیه
نتیجه:
V_S\approx114.2,\mathrm{فوت/ثانیه
گام ۴: محاسبه سرعت چرخش (( \mathbit{V}_\mathbit{R})) فرضیه: (V_R ) معمولاً ( 1.1\times V_S ) است محاسبه:\bigmV_R\ =\ 1.1\ \times114.2\ =\ 125.62\ ,\ "{فوت/ثانیه}] نتیجه:
V_R\approx125.6,\mathrm{فوت/ثانیه
گام ۵: محاسبه سرعت برخاست (( \mathbit{V}{\mathbit{LOF}} )) فرضیه: ( V{LOF} ) معمولاً ( 1.15\times V_S ) است محاسبه:
V_{LOF}=1.15\times114.2=131.33,\mathrm{فوت/ثانیه
نتیجه:
V_{LOF}\approx131.3,\mathrm{فوت/ثانیه
گام ۶: محاسبه سرعت در ارتفاع ۵۰ فوت (( \mathbit{V}{\mathbf{50}} )) فرضیه: ( V{50} ) معمولاً ( 1.2\times V_S ) است محاسبه:
V_{50}=1.2\times114.2=137.04,\mathrm{فوت/ثانیه نتیجه:
V_{50}\approx137.0,\mathrm{فوت/ثانیه
گام ۱: محاسبه عامل مقاومت القایی (( K )) فرمول:
K=\frac{1}{\pi e A}\bigm جایگذاری مقادیر دادهشده:
K=\frac{1}{\pi\times0.8\times7}=\frac{1}{17.5929}\approx0.0568\bigm نتیجه:
K\ \approx0.0568\bigm
گام ۲: محاسبه ضریب لیفت در سرعت پرتاب ((\mathbit{V}_\mathbit{S})) در سرعت پرتاب، لیفت برابر با وزن هواپیما است:
L=W=\frac{1}{2}\rho V_S^2SC_{L_{\mathrm{max}}}\bigm ما میتوانیم برای تایید ( C_{L_{\mathrm{max}}} ) بازنویسی کنیم:
C_{L_{\mathrm{max}}}=\frac{2W}{\rho V_S^2S}\bigm جایگذاری مقادیر: ( W\ =\ 4,600 ) پوند ( \rho=\ 0.0024 ) اسلاگ/فوت³ ( V_S=114.4 ) فوت/ثانیه ( S\ =\ 175 ) فوت² محاسبه:
C_{L_{\mathrm{max}}}=\frac{2\times4,600}{0.0024\times\left(114.4\right)^2\times175}\bigm ابتدا ( V_S^2 ) را محاسبه میکنیم:
V_S^2=\left(114.4\right)^2=13,084.16,فوت2/ثانیه2
سپس مخرج را محاسبه میکنیم:
\rho V_S^2S=0.0024\times13,084.16\times175=5,473.248,\mathrm{پوند
اکنون ( C_{L_{\mathrm{max}}} ) را محاسبه میکنیم:
C_{L_{\mathrm{max}}}=\frac{9,200}{5,473.248}\approx1.68\bigm این مقدار به طور نزدیکی با مقدار دادهشده (( C_{L_{\mathrm{max}}}=1.69 )) مطابقت دارد.
گام ۳: محاسبه ضریب لیفت در سرعت چرخش (( \mathbit{V}_\mathbit{R} )) به همین ترتیب، (C_L ) در ( V_R ) را محاسبه میکنیم:
C_{L_R}=\frac{2W}{\rho V_R^2S}\bigm محاسبه ( \mathbit{V}_\mathbit{R}^\mathbf{2} ):
V_R^2=\left(125.84\right)^2=15,842.71,فوت2/ثانیه2
محاسبه مخرج:
\rho V_R^2S=0.0024\times15,842.71\times175=6,667.296,\mathrm{پوند
محاسبه ( C_{L_R} ):
C_{L_R}=\frac{9,200}{6,667.296}\approx1.38\bigm
گام ۴: محاسبه ضریب مقاومت در سرعت چرخش (( \mathbit{V}_\mathbit{R})) ضریب مقاومت (( C_D )) به صورت زیر است:
C_D=C_{D_0}+KC_L^2\bigm جایگذاری مقادیر:
C_D=0.0620+0.0568\times\left(1.38\right)^2\bigm محاسبه ( (1.38)^2 ):
\left(1.38\right)^2=1.9044\bigm محاسبه ( \mathbit{K}\mathbit{C}_\mathbit{L}^\mathbf{2} ):
0.0568\ \times1.9044\ \approx0.1082\bigm در نتیجه:
C_D=0.0620+0.1082\approx0.1702\bigm
گام ۵: محاسبه فشار دینامیکی در ( \mathbit{V}_\mathbit{R}) فشار دینامیکی (( q )) به صورت زیر است:
q=\frac{1}{2}\rho V^2\bigm در ( V_R=125.84 ) فوت/ثانیه:
q=0.5\times0.0024\times\left(125.84\right)^2\bigm\bigm\bigmq=0.0012\times15,842.71=19.011,پوند/فوت2 گام ۶: محاسبه لیفت و مقاومت در ( \mathbit{V}\mathbit{R} ) لیفت (( L )) در ( \mathbit{V}\mathbit{R} ): L=qSC_L=19.011\times175\times1.38\approx4,580,\mathrm{پوند \bigmاین مقدار کمی کمتر از وزن است 4,600پوند، که انتظار میرود زیرا لیفتی کامل کمی پس از ( V_R ) حاصل میشود. مقاومت (( D )) در ( \mathbit{V}_\mathbit{R} ):
D=qSC_D=19.011\times175\times0.1702\approx564,\mathrm{پوند
گام ۷: محاسبه شتاب در ( V = 0 ) و ( \mathbit{V}=\mathbit{V}\mathbit{R} ) در ( V = 0 ): نیروی رانش (( F_N )) = ۲,۰۰۰ پوند مقاومت (( D )) = ۰ پوند نیروی اصطکاک ((F{\mathrm{fr}}=\mu_gW)):
F_{\mathrm{fr}}=0.03\times4,600=138,\mathrm{پوند
نیروی خالص (( \sum\mathbit{F} )) در ( V = 0 ):
\sum F=F_N-D-\mu_g\left(W-L\right)=2,000-0-138=1,862,\mathrm{پوند
شتاب (( \mathbit{a}_\mathbf{0} )) در ( \mathbit{V}\ =\ \mathbf{0} ):
a_0=\frac{\sum F}{m}=\frac{1,862}{W/g}=\frac{1,862\times32.2}{4,600}\approx13.04,فوت/ثانیه2
در ( \mathbit{V}=\mathbit{V}\mathbit{R} ): نیروی رانش (( F_N )) = ۱,۲۰۰ پوند مقاومت (( D )) = ۵۶۴ پوند (از گام ۶) لیفت ((\ L )) = ۴,۵۸۰ پوند (از گام ۶) نیروی اصطکاک (( F{"{fr}}\ =\ \mu_g\ (W\ -\ L) )):
F_{\mathrm{fr}}=0.03\times\left(4,600-4,580\right)=0.6,\mathrm{پوند
نیروی خالص (( \sum\mathbit{F} )) در ( \mathbit{V}_\mathbit{R} ):
\sum F=F_N-D-F_{\mathrm{fr}}=1,200-564-0.6=635.4,\mathrm{پوند
شتاب ((\mathbit{a}\mathbit{R} )) در ( \mathbit{V}\mathbit{R} ):
a_R=\frac{\sum F}{W/g}=\frac{635.4\times32.2}{4,600}\approx4.45,فوت/ثانیه2
گام ۸: محاسبه شتاب متوسط (( \bar{\mathbit{a}} ))
\bar{a}=\frac{a_0+a_R}{2}=\frac{13.04+4.45}{2}\approx8.75,فوت/ثانیه2
گام ۹: محاسبه مسافت رولینگ روی زمین برخاست (( \mathbit{s}_\mathbit{R} )) با استفاده از فرمول شتاب یکنواخت:
s_R=\frac{\left(V_R-V_w\right)^2}{2\bar{a}}\bigm\bigmچون ( V_w=0 ):
s_R=\frac{\left(125.84\right)^2}{2\times8.75}=\frac{15,842.71}{17.5}\approx905,\mathrm{فوت \bigmنتیجه\ sR≈905,فوت گام ۱۰: محاسبه زمان رسیدن به سرعت چرخش (( \mathbit{t}_\mathbit{R} )) با استفاده از:
t_R=\frac{V_R-V_w}{\bar{a}}\bigm\bigm\bigmt_R=\frac{125.84}{8.75}\approx14.38,\mathrm{ثانیه \bigmنتیجه tR≈14.38,ثانیه گام ۱۱: محاسبه کل مسافت برخاست (( \mathbit{s}{\mathrm{TO}} )) کل مسافت برخاست شامل مسافت رولینگ روی زمین و مسافت رسیدن به ارتفاع صفحه نمایش (معمولاً ۵۰ فوت یا ۳۵ فوت، بسته به مقررات) است. روش تقریبی برای برآورد مسافت اضافی (( \mathbit{s}{\mathbit{L}\mathbf{35}} )) از برخاست تا ارتفاع صفحه نمایش:
s_{L35}=\left(\frac{W}{\left(F_N-D\right)\mathrm{avg} }\right)\left(\frac{V{35}^2-V_{LOF}^2}{2g}+h_{\mathrm{sc}}\right)\bigm\bigmبا فرض اینکه \left(V_{35}\approx V_{LOF}\right) h_{\mathrm{sc}}=50 ، مسافت اضافی نسبت به ( s_R ) کوچک است
s_{\mathrm{TO}}=s_R+s_{L35}\approx905,\mathrm{فوت+877,فوت≈1,782,فوت
پارامترهای اضافی: بارگذاری بالها (( W/S )):
\frac{W}{S}=\frac{4,600}{175}\approx26.29,پوند/فوت2
نسبت نیروی رانش به وزن در برخاست:
\left(\frac{T}{W}\right){\mathrm{takeoff}}=\frac{2,000}{4,600}\approx0.435\bigm نیروی رانش متوسط \left(\left(\mathbit{F}{\mathbit{N}_{\mathrm{avg}}}\right)\right):
F_{N_{\mathrm{avg}}}=\frac{T_{V=0}+T_{V=V_R}}{2}=\frac{2,000+1,200}{2}=1,600,\mathrm{پوند Ajo Kumar گام ۱: تعیین سرعت تیک آف \left(\left(\mathbit{V}{\mathrm{LO}}\right)\right) سرعت تیک آف \left(\left(\mathbit{V}{\mathrm{LO}}\right)\right) سرعتی است که در آن هواپیما میتواند از زمین بلند شود. این سرعت با شرط تساوی لیفت و وزن تعیین میشود:
\mathbit{L}=\mathbit{W}=\frac{\mathbf{1}}{\mathbf{2}}\mathbf{\rho}\mathbit{S}\mathbit{C}{\mathbit{L}{\mathrm{max}}}\mathbit{V}{\mathrm{LO}}^\mathbf{2}\bigm حل برای \left(\mathbit{V}{\mathrm{LO}}\right):
\mathbit{V}{\mathrm{LO}}=\sqrt{\frac{\mathbf{2}\mathbit{W}}{\mathbf{\rho}\mathbit{S}\mathbit{C}{\mathbit{L}_{\mathrm{max}}}}}\bigm قرار دادن مقادیر:
\mathbit{V}{\mathrm{LO}}=\sqrt{\frac{\mathbf{2}\times\mathbf{4600}}{\mathbf{0}.\mathbf{0023769}\times\mathbf{175}\times\mathbf{1}.\mathbf{69}}}\approx\sqrt{\frac{\mathbf{9200}}{\mathbf{0}.\mathbf{7025}}}\approx\sqrt{\mathbf{13115}.\mathbf{6}}\approx\mathbf{114}.\mathbf{5}\mathrm{\ ft/s}\bigm گام ۲: محاسبه حداکثر ضریب لیفت\left(\left(\mathbit{C}\mathbit{D}\right)\right) با استفاده از رابطه:
\mathbit{C}\mathbit{D}=\frac{\mathbit{C}\mathbit{L}^\mathbf{2}}{\mathbf{\pi}\mathbit{eA}}\bigm در سرعت تیک آف:
\mathbit{C}\mathbit{D}=\frac{\mathbf{1}.\mathbf{6}\mathbf{9}^\mathbf{2}}{\mathbf{\pi}\times\mathbf{0}.\mathbf{80}\times\mathbf{7}}\approx\frac{\mathbf{2}.\mathbf{8561}}{\mathbf{17}.\mathbf{592}}\approx\mathbf{0}.\mathbf{1623}\bigm گام ۳: محاسبه لیفت و درگ در سرعت متوسط فرض کنید سرعت متوسط در طول شتابگیری تقریباً برابر با \left(\mathbf{0}.\mathbf{707}\mathbit{V}{\mathrm{LO}}\right) است:
\mathbit{V}{\mathrm{avg}}=\mathbf{0}.\mathbf{707}\times\mathbf{114}.\mathbf{5}\approx\mathbf{81}\mathrm{\ ft/s}\bigm لیفت \left(\mathbit{L}\right) در \left(\mathbit{V}{\mathrm{avg}}\right):
\mathbit{L}=\frac{\mathbf{1}}{\mathbf{2}}\mathbf{\rho}\mathbit{S}\mathbit{C}\mathbit{L}\mathbit{V}{\mathrm{avg}}^\mathbf{2}=\frac{\mathbf{1}}{\mathbf{2}}\times\mathbf{0}.\mathbf{0023769}\times\mathbf{175}\times\mathbf{1}.\mathbf{69}\times\mathbf{8}\mathbf{1}^\mathbf{2}\approx\mathbf{4600}\mathrm{\ lbₚ
درگ (D) در \left(\mathbit{V}_{\mathrm{avg}}\right):
\mathbit{D}=\frac{\mathbf{1}}{\mathbf{2}}\mathbf{\rho}\mathbit{S}\mathbit{C}\mathbit{D}\mathbit{V}{\mathrm{avg}}^\mathbf{2}=\mathbf{0}.\mathbf{207783}\times\mathbf{0}.\mathbf{1623}\times\mathbf{8}\mathbf{1}^\mathbf{2}\approx\mathbf{443}\mathrm{\ lbₚ
گام ۴: تعیین نیروی خالص و شتاب با استفاده از فرمول:
\mathbit{a}=\left(\frac{\mathbit{g}}{\mathbit{W}}\right)\left[\mathbit{T}-\mathbit{D}-\mathbf{\mu}\left(\mathbit{W}-\mathbit{L}\right)-\mathbit{W}\mathbf{\delta}\right]\bigm گام ۵: محاسبه مسافت رول روی زمین برای تیک آف\left(\left(\mathbit{S}_\mathbit{G}\right)\right) با استفاده از معادله ساده شده:
\mathbit{S}\mathbit{G}=\frac{\mathbit{W}\mathbit{V}{\mathrm{LO}}^\mathbf{2}}{\mathbf{2}\mathbit{g}\left[\left(\mathbit{T}-\mathbf{\mu}\mathbit{W}\right)-\left(\mathbit{C}\mathbit{D}-\mathbf{\mu}\mathbit{C}\mathbit{L}\right)\mathbit{Sq}\right]}\bigm که در آن: q=12ρVavg2=0.5×0.0023769×812≈7.798 slugs/ft·s² \left(\left(\mathbit{C}\mathbit{D}-\mathbf{\mu}\mathbit{C}\mathbit{L}\right)=\mathbf{0}.\mathbf{1623}-\mathbf{0}.\mathbf{03}\times\mathbf{1}.\mathbf{69}\approx\mathbf{0}.\mathbf{1116}\right) قرار دادن مقادیر:
\mathbit{S}_\mathbit{G}=\frac{\mathbf{4600}\times\mathbf{114}.\mathbf{5}^\mathbf{2}}{\mathbf{2}\times\mathbf{32}.\mathbf{174}\times\left(\mathbf{1004}-\mathbf{138}-\mathbf{0}.\mathbf{1116}\times\mathbf{175}\times\mathbf{7}.\mathbf{798}\right)}\approx\frac{\mathbf{6}.\mathbf{0306}\times\mathbf{1}\mathbf{0}^\mathbf{7}}{\mathbf{45},\mathbf{881}}\approx\mathbf{1314}\mathrm{\ ft}\bigm گام ۶: برآورد زمان مورد نیاز برای تیک آف \left(\left(\mathbit{tSG}\right)\right) با استفاده از رابطه:
\mathbit{t}{\mathbit{SG}}=\frac{\mathbit{V}{\mathbit{LOF}}}{\mathbit{a}{\mathrm{avg}}}\bigm که در آن \left(\mathbit{a}{\mathrm{avg}}\right) شتاب متوسط است. از محاسبات:
\mathbit{a}\approx\frac{\mathbf{32}.\mathbf{174}}{\mathbf{4600}}\times\mathbf{713}.\mathbf{6}\approx\mathbf{4}.\mathbf{99}\mathrm{\ }{\mathrm{ft/s}}^\mathbf{2}\bigm بنابراین،
\mathbit{t}_{\mathbit{SG}}=\frac{\mathbf{114}.\mathbf{5}}{\mathbf{4}.\mathbf{99}}\approx\mathbf{23}\mathrm{\ ثانیه "
- Assistant
Certainly! Let's compare the solutions and parameters used by the three sources—Roskam, Young, and Ajo Kumar—in solving the aircraft takeoff problem. We'll analyze each solution step by step, highlight the parameters used, and discuss any differences in assumptions or results.
Introduction
The problem involves calculating various parameters related to the takeoff performance of an aircraft. Key parameters include lift coefficient at liftoff, drag coefficient during ground roll, takeoff speed, acceleration during takeoff, ground roll distance, and total takeoff distance. Each author approaches the problem slightly differently, and we'll compare their methods and results.
Roskam's Solution
Reference: Jan Roskam's "Airplane Design Part II: Preliminary Configuration Design and Integration of the Propulsion System"
Key Steps and Calculations:
-
Determining Liftoff Lift Coefficient (( C_{L_{\text{LOF}}} ))
[ C_{L_{\text{LOF}}} = \frac{C_{L_{\text{max}}}}{\left( \frac{V_{\text{LOF}}}{V_S} \right)^2} = \frac{1.69}{1.15^2} = 1.28 ]
-
Lift Coefficient During Ground Roll (Out of Ground Effect)
[ C_{L_{\text{out of ground effect}}} = 0.83 \quad (\text{Given}) ]
-
Lift Coefficient During Ground Roll (In Ground Effect)
[ C_{L_g} = 0.89, \quad C_{L_g} = \frac{C_L}{1 + \frac{b}{2h}} ]
-
Drag Coefficient During Ground Roll (Out of Ground Effect)
[ C_D = C_{D_0} + \frac{C_{L_{\text{out of ground effect}}}^2}{\pi A e} = 0.0620 + \frac{0.83^2}{\pi \times 7 \times 0.80} = 0.1012 ]
-
Ground Effect Calculations
-
Height to Mean Geometric Chord (( h )): ( h = 3.6 ) ft
-
Height to Wingspan Ratio: ( \frac{h}{b} = \frac{3.6}{35} = 0.103 )
-
Ground Effect Factor (( \sigma )): ( \sigma = 0.48 \quad (\text{From charts}) )
-
Change in Induced Drag Coefficient due to Ground Effect:
[ \Delta C_{D_i} = -\sigma \frac{C_{L_g}^2}{\pi A} = -0.48 \times \frac{0.89^2}{\pi \times 7} = -0.0150 ]
-
Drag Coefficient in Ground Effect:
[ C_{D_g} = C_D (\text{out of ground effect}) + \Delta C_{D_i} = 0.1012 - 0.0150 = 0.0862 ]
-
-
Calculating ( C_D - \mu_g C_L )
[ C_D - \mu_g C_L = 0.0862 - 0.03 \times 0.89 = 0.0595 ]
-
Stall Speed (( V_S ))
[ V_S = \sqrt{\frac{2W}{\rho S C_{L_{\text{max}}}}} = 114.4 \text{ ft/s} = 67.8 \text{ knots} ]
-
Liftoff Speed (( V_{\text{LOF}} ))
[ V_{\text{LOF}} = 1.15 V_S = 131.6 \text{ ft/s} = 77.9 \text{ knots} ]
-
Dynamic Pressures
-
At Liftoff:
[ q_{\text{LOF}} = 0.5 \rho V_{\text{LOF}}^2 = 20.6 \text{ lb/ft}^2 ]
-
At Rotation Speed (( V_R )):
[ V_R = 1.10 V_S = 125.8 \text{ ft/s} = 74.5 \text{ knots} ] [ q_R = 0.5 \rho V_R^2 = 18.8 \text{ lb/ft}^2 ]
-
-
Takeoff Accelerations
-
Acceleration at Start of Ground Roll:
[ a_{g_{V=0}} = g \left[ \frac{T}{W} - \mu_g \right] - \frac{(C_{D_0} - \mu_g C_L)}{q_0 S / W} = 12.9 \text{ ft/s}^2 ]
-
Acceleration at Rotation Speed:
[ a_{g_{V=V_R}} = g \left[ \frac{T}{W} - \mu_g \right] - \frac{(C_D - \mu_g C_L)}{q_R S / W} = 6.1 \text{ ft/s}^2 ]
-
-
Ground Roll Distance (( S_{\text{NGR}} ))
-
Acceleration Ratio:
[ k = \frac{a_{g_{V=V_R}}}{a_{g_{V=0}}} = 0.7 ]
-
Average Acceleration:
[ a_{g_{\text{ave}}} = a_{g_{V=0}} \times \frac{1 + k}{2} = 9.1 \text{ ft/s}^2 ]
-
Ground Roll Distance:
[ S_{\text{NGR}} = \frac{V_R^2}{2 a_{g_{\text{ave}}}} = 870 \text{ ft} ]
-
-
Rotation Distance (( S_R ))
[ S_R = V_R \times t_{\text{rotate}} = 125.8 \times 1 = 129 \text{ ft} \quad (\text{Assuming } t_{\text{rotate}} = 1 \text{ s}) ]
-
Transition and Climb Calculations
-
Transition Lift Coefficient Change (( \Delta C_L )) (Not fully detailed)
-
Transition Radius (( R_{\text{TR}} ))
[ R_{\text{TR}} = 2 \left( \frac{W}{S} \right) \frac{1}{\rho g \Delta C_L} ]
-
Height During Transition
[ h_{\text{TR}} = R_{\text{TR}} \times (1 - \cos \theta_{\text{CL}}) = 47 \text{ ft} ]
-
Screen Height Distance (( S_{\text{CL}} ))
[ S_{\text{CL}} = \frac{h_{\text{screen}} - h_{\text{TR}}}{\tan \theta_{\text{CL}}} = 23 \text{ ft} ]
-
-
Total Takeoff Distance (( S_{\text{TO}} ))
[ S_{\text{TO}} = S_{\text{NGR}} + S_R + S_{\text{TR}} + S_{\text{CL}} = 870 + 129 + 732 + 23 = 1,754 \text{ ft} ]
-
Takeoff Time Calculations
-
Time for Ground Roll:
[ t_{\text{NGR}} = \frac{V_R}{a_{g_{\text{ave}}}} = \frac{125.8}{9.1} = 15.4 \text{ s} ]
-
Rotation Time:
[ t_R = 1 \text{ s} \quad (\text{Given}) ]
-
Time for Transition and Climb to Screen Height:
[ t_{\text{TR}} = \frac{S_{\text{TR}}}{V_{\text{LOF}}} = \frac{732}{131.6} = 5.6 \text{ s} ] [ t_{\text{CL}} = \frac{2 S_{\text{CL}}}{V_{\text{LOF}} + V_2} = 0.2 \text{ s} ]
-
Total Takeoff Time:
[ t_{\text{TO}} = t_{\text{NGR}} + t_R + t_{\text{TR}} + t_{\text{CL}} = 15.4 + 1 + 5.6 + 0.2 = 22.2 \text{ s} ]
-
Parameters Used:
- ( C_{L_{\text{max}}} = 1.69 )
- Wing span (( b )) = 35 ft
- Mean aerodynamic chord (( h )) = 3.6 ft
- Wing area (( S )) = 175 ft(^2)
- Aspect ratio (( A )) = 7
- Oswald efficiency factor (( e )) = 0.80
- Zero-lift drag coefficient (( C_{D_0} = 0.0620 ))
- Friction coefficient (( \mu_g = 0.03 ))
- Takeoff weight (( W = 4,600 ) lb)
- Air density at sea level (( \rho = 0.00238 ) slugs/ft(^3))
- Acceleration due to gravity (( g = 32.2 ) ft/s(^2))
Young's Solution
Reference: Assuming "Young" refers to a textbook or author addressing aircraft performance.
Key Steps and Calculations:
-
Thrust During Takeoff:
- At ( V = 0 ): ( T_{V=0} = 2,000 ) lb
- At ( V = V_R ): ( T_{V=V_R} = 1,200 ) lb
-
Estimating Zero-Lift Drag Coefficient (( C_{D_0} ))
[ C_{D_0} = C_{D_{\text{clean}}} + \Delta C_{D_{\text{slats}}} + \Delta C_{D_{\text{flaps}}} + \Delta C_{D_{\text{gear}}} ]
- ( C_{D_{\text{clean}}} \approx 0.025 )
- ( \Delta C_{D_{\text{slats}}} = 0.002 )
- ( \Delta C_{D_{\text{flaps}}} = 0.02 ) (for 15° flap deflection)
- ( \Delta C_{D_{\text{gear}}} = 0.005 )
Calculated:
[ C_{D_0} = 0.025 + 0.002 + 0.02 + 0.005 = 0.052 ]
-
Calculating Stall Speed (( V_S ))
[ V_S = \sqrt{\frac{2W}{\rho S C_{L_{\text{max}}}}} = 114.2 \text{ ft/s} ]
-
Calculating Rotation Speed (( V_R ))
[ V_R = 1.1 V_S = 125.6 \text{ ft/s} ]
-
Calculating Liftoff Speed (( V_{\text{LOF}} ))
[ V_{\text{LOF}} = 1.15 V_S = 131.3 \text{ ft/s} ]
-
Calculating Speed at 50 ft Height (( V_{50} ))
[ V_{50} = 1.2 V_S = 137.0 \text{ ft/s} ]
-
Calculating Induced Drag Factor (( K ))
[ K = \frac{1}{\pi e A} = \frac{1}{\pi \times 0.80 \times 7} = 0.0568 ]
-
Calculating Lift Coefficient at Stall Speed
[ C_{L_{\text{max}}} = \frac{2W}{\rho V_S^2 S} \approx 1.68 ]
-
Calculating Lift Coefficient at Rotation Speed (( C_{L_R} ))
[ C_{L_R} = \frac{2W}{\rho V_R^2 S} \approx 1.38 ]
-
Calculating Drag Coefficient at Rotation Speed
[ C_D = C_{D_0} + K C_L^2 = 0.0620 + 0.0568 \times 1.38^2 = 0.1702 ]
-
Calculating Dynamic Pressure at ( V_R )
[ q = 0.5 \rho V_R^2 = 19.0 \text{ lb/ft}^2 ]
-
Calculating Lift and Drag at ( V_R )
-
Lift:
[ L = q S C_L = 19.0 \times 175 \times 1.38 = 4,580 \text{ lb} ]
-
Drag:
[ D = q S C_D = 19.0 \times 175 \times 0.1702 = 564 \text{ lb} ]
-
-
Calculating Accelerations
-
At ( V = 0 ):
[ \sum F = T - D - \mu_g (W - L) = 2,000 - 0 - 0.03 \times 4,600 = 1,862 \text{ lb} ] [ a_0 = \frac{\sum F}{m} = \frac{1,862}{4,600 / 32.2} \approx 13.04 \text{ ft/s}^2 ]
-
At ( V = V_R ):
[ \sum F = T - D - \mu_g (W - L) = 1,200 - 564 - 0.6 = 635.4 \text{ lb} ] [ a_R = \frac{\sum F}{m} = \frac{635.4}{4,600 / 32.2} \approx 4.45 \text{ ft/s}^2 ]
-
-
Calculating Average Acceleration
[ \bar{a} = \frac{a_0 + a_R}{2} = \frac{13.04 + 4.45}{2} \approx 8.75 \text{ ft/s}^2 ]
-
Calculating Ground Roll Distance
[ s_R = \frac{V_R^2}{2 \bar{a}} = \frac{125.8^2}{2 \times 8.75} = 905 \text{ ft} ]
-
Calculating Time to Reach Rotation Speed
[ t_R = \frac{V_R}{\bar{a}} = \frac{125.8}{8.75} = 14.38 \text{ s} ]
-
Estimating Total Takeoff Distance
[ S_{\text{TO}} = s_R + s_{L35} \approx 905 \text{ ft} + 877 \text{ ft} \approx 1,782 \text{ ft} ]
Parameters Used:
- ( T_{V=0} = 2,000 ) lb
- ( T_{V=V_R} = 1,200 ) lb
- ( C_{D_0} \approx 0.06 )
- ( C_{L_{\text{max}}} \approx 1.68 )
- ( K = 0.0568 )
- ( W = 4,600 ) lb
- ( S = 175 ) ft(^2)
- ( e = 0.80 )
- ( A = 7 )
- ( \mu_g = 0.03 )
Ajo Kumar's Solution
Reference: Presumably from "Aircraft Performance and Design" or similar.
Key Steps and Calculations:
-
Determining Liftoff Speed (( V_{\text{LO}} ))
[ V_{\text{LO}} = \sqrt{\frac{2W}{\rho S C_{L_{\text{max}}}}} = \sqrt{\frac{2 \times 4,600}{0.0023769 \times 175 \times 1.69}} \approx 114.5 \text{ ft/s} ]
-
Calculating Maximum Drag Coefficient (( C_D ))
[ C_D = \frac{C_L^2}{\pi e A} = \frac{1.69^2}{\pi \times 0.80 \times 7} \approx 0.1623 ]
-
Calculating Average Speed During Acceleration
- ( V_{\text{avg}} = 0.707 V_{\text{LO}} \approx 81 \text{ ft/s} )
-
Calculating Lift and Drag at ( V_{\text{avg}} )
-
Lift:
[ L = \frac{1}{2} \rho S C_L V_{\text{avg}}^2 \approx 4,600 \text{ lb} ]
-
Drag:
[ D = \frac{1}{2} \rho S C_D V_{\text{avg}}^2 \approx 443 \text{ lb} ]
-
-
Determining Net Force and Acceleration
-
Net Force:
[ a = \left( \frac{g}{W} \right) [T - D - \mu (W - L) - W \delta ] ]
(Assuming negligible runway slope, ( \delta = 0 ))
-
-
Calculating Ground Roll Distance (( S_G ))
[ S_G = \frac{W V_{\text{LO}}^2}{2g [ (T - \mu W) - (C_D - \mu C_L) S q ]} ]
-
Where:
- ( q = \frac{1}{2} \rho V_{\text{avg}}^2 = 7.798 \text{ slugs/ft}^2 )
- ( C_D - \mu C_L = 0.1623 - 0.03 \times 1.69 = 0.1116 )
-
Calculated:
[ S_G = \frac{4,600 \times 114.5^2}{2 \times 32.174 \times [ (1,004 - 138) - 0.1116 \times 175 \times 7.798 ]} \approx 1,314 \text{ ft} ]
-
-
Estimating Time Required for Takeoff (( t_{SG} ))
[ a_{\text{avg}} \approx \frac{32.174}{4,600} \times 713.6 \approx 4.99 \text{ ft/s}^2 ] [ t_{SG} = \frac{V_{\text{LOF}}}{a_{\text{avg}}} = \frac{114.5}{4.99} \approx 23 \text{ s} ]
Parameters Used:
- ( C_{L_{\text{max}}} = 1.69 )
- ( W = 4,600 ) lb
- ( S = 175 ) ft(^2)
- ( e = 0.80 )
- ( A = 7 )
- ( \mu = 0.03 )
- ( T = 1,004 ) lb (Assumed average thrust)
- Air density (( \rho = 0.0023769 ) slugs/ft(^3))
- ( g = 32.174 ) ft/s(^2)
Comparative Analysis
Similarities:
-
Stall Speed Calculations: All three sources calculate the stall speed (( V_S )) using the same fundamental equation and obtain values around 114 ft/s.
-
Lift Coefficient ( C_{L_{\text{max}}} ): Each solution uses ( C_{L_{\text{max}}} = 1.69 ).
-
Use of Aerodynamic Coefficients: All sources consider ( C_{D_0} ), ( K ), ( C_L ), and ( C_D ) in their calculations.
-
Consideration of Ground Effect: Roskam explicitly calculates the impact of ground effect on lift and drag, which is an important factor during takeoff.
Differences:
-
Ground Effect:
- Roskam includes detailed calculations for ground effect, adjusting lift and drag coefficients accordingly.
- Young and Ajo Kumar do not explicitly account for ground effect in their calculations.
-
Thrust Variation:
- Young considers the variation of thrust with speed, providing thrust values at ( V = 0 ) and ( V = V_R ).
- Roskam and Ajo Kumar assume constant thrust during takeoff or do not provide varying thrust values.
-
Calculations of Acceleration:
- Roskam calculates accelerations at both ( V = 0 ) and ( V = V_R ) and computes an average acceleration for ground roll distance.
- Young also calculates accelerations at ( V = 0 ) and ( V = V_R ) but uses a slightly different method to find the average acceleration.
- Ajo Kumar assumes a constant average acceleration based on net force calculations.
-
Total Takeoff Distance:
- Roskam calculates a total takeoff distance of approximately 1,754 ft.
- Young estimates the total takeoff distance to be around 1,782 ft.
- Ajo Kumar calculates the ground roll distance to be 1,314 ft, without explicitly adding transition and climb distances.
-
Methodology:
- Roskam provides a comprehensive step-by-step approach, including ground effect, transition phase, and climb to the screen height.
- Young focuses on the ground roll distance and provides an estimation for the total takeoff distance.
- Ajo Kumar offers a simplified calculation, primarily focusing on the ground roll and using average values without detailed phase breakdowns.
Observations:
-
Ground Effect Importance: Roskam's inclusion of ground effect results in slightly lower drag coefficients during ground roll, which affects the acceleration and distance calculations.
-
Thrust Variation Impact: Young's consideration of reduced thrust at higher speeds (due to propeller or engine characteristics) affects the net acceleration and increases ground roll distance.
-
Assumptions and Simplifications: Ajo Kumar's method includes simplifications (e.g., assuming average speed and acceleration) that may result in less accurate estimations compared to the more detailed approaches of Roskam and Young.
-
Numerical Consistency: Despite different methods, the results for total takeoff distance are relatively close among the sources, indicating that the methods are consistent within reasonable assumptions.
Conclusion
The three sources—Roskam, Young, and Ajo Kumar—provide methods to calculate aircraft takeoff performance, each with varying levels of detail and assumptions:
-
Roskam offers a detailed and comprehensive approach, accounting for ground effect, detailed acceleration profiles, and phase-by-phase distance calculations.
-
Young provides a practical method, incorporating thrust variation with speed and focusing on key parameters affecting ground roll distance.
-
Ajo Kumar uses a simplified approach, suitable for quick estimations, focusing mainly on ground roll distance with average values.
When comparing their solutions:
-
Key Parameters such as ( C_{L_{\text{max}}} ), ( V_S ), and aerodynamic coefficients are consistently used.
-
Differences arise due to factors like ground effect consideration, thrust variation, and methodological simplifications.
Understanding these variations is crucial for accurate aircraft performance analysis and can aid in selecting the appropriate level of detail for specific engineering applications.
By comparing the solutions and parameters from each source, we gain insights into the impact of different assumptions and methods on the calculation of takeoff performance. This comparison highlights the importance of considering factors like ground effect and thrust variation to obtain precise results.
-