Skip to content
The Chat Archive
o1-mini-2024-09-12· OpenAI WildChat-4.8M (AI2)

We turn now from the introduction, the purpose, and the questions and hypotheses to the…

  1. User

    We turn now from the introduction, the purpose, and the questions and hypotheses to the method section of a proposal. This chapter presents essential steps in designing quantitative methods for a research proposal or study, with specific focus on survey and experimental designs. These designs reflect postpositivist philosophical assumptions, as discussed in Chapter 1. For example, determinism suggests that examining the relationships between and among variables is central to answering questions and hypotheses through surveys and experiments. In one case, a researcher might be interested in evaluating whether playing violent video games is associated with higher rates of playground aggression in kids, which is a correlational hypothesis that could be evaluated in a survey design. In another case, a researcher might be interested in evaluating whether violent video game playing causes aggressive behavior, which is a causal hypothesis that is best evaluated by a true experiment. In each case, these quantitative approaches focus on carefully measuring (or experimentally manipulating) a parsimonious set of variables to answer theory-guided research questions and hypotheses. In this chapter, the focus is on the essential components of a method section in proposals for a survey or experimental study. Defining Surveys and Experiments A survey design provides a quantitative description of trends, attitudes, and opinions of a population, or tests for associations among variables of a population, by studying a sample of that population. Survey designs help researchers answer three types of questions: (a) descriptive questions (e.g., What percentage of practicing nurses support the provision of hospital abortion services?); (b) questions about the relationships between variables (e.g., Is there a positive association between endorsement of hospital abortion services and support for implementing hospice care among nurses?); or in cases where a survey design is repeated over time in a longitudinal study; (c) questions about predictive relationships between variables over time (e.g., Does Time 1 endorsement of support for hospital abortion services predict greater Time 2 burnout in nurses?). An experimental design systematically manipulates one or more variables in order to evaluate how this manipulation impacts an outcome (or outcomes) of interest. Importantly, an experiment isolates the effects of this manipulation by holding all other variables constant. When one group receives a treatment and the other group does not (which is a manipulated variable of interest), the experimenter can isolate whether the treatment and not other factors influence the outcome. For example, a sample of nurses could be randomly assigned to a 3-week expressive writing program (where they write about their deepest thoughts and feelings) or a matched 3-week control writing program (writing about the facts of their daily morning routine) to evaluate whether this expressive writing manipulation reduces job burnout in the months following the program (i.e., the writing condition is the manipulated variable of interest, and job burnout is the outcome of interest). Whether a quantitative study employs a survey or experimental design, both approaches share a common goal of helping the researcher make inferences about relationships among variables, and how the sample results may generalize to a broader population of interest (e.g., all nurses in the community). Components of a Survey Study Method Plan The design of a survey method plan follows a standard format. Numerous examples of this format appear in scholarly journals, and these examples provide useful models. The following sections detail typical components. In preparing to design these components into a proposal, consider the questions on the checklist shown in Table 8.1 as a general guide. The Survey Design The first parts of the survey method plan section can introduce readers to the basic purpose and rationale for survey research. Begin the section by describing the rationale for the design. Specifically: • Identify the purpose of survey research. The primary purpose is to answer a question (or questions) about variables of interest to you. A sample purpose statement could read: “The primary purpose of this study is to empirically evaluate whether the number of overtime hours worked predicts subsequent burnout symptoms in a sample of emergency room nurses.” • Indicate why a survey method is the preferred type of approach for this study. In this rationale, it can be beneficial to acknowledge the advantages of survey designs, such as the economy of the design, rapid turnaround in data collection, and constraints that preclude you from pursuing other designs (e.g., “An experimental design was not adopted to look at the relationship between overtime hours worked and burnout symptoms because it would be prohibitively difficult, and potentially unethical, to randomly assign nurses to work different amounts of overtime hours.”). • Indicate whether the survey will be cross-sectional—with the data collected at one point in time—or whether it will be longitudinal—with data collected over time. • Specify the form of data collection. Fowler (2014) identified the following types: mail, telephone, the Internet, personal interviews, or group administration (see also Fink, 2016; Krueger & Casey, 2014). Using an Internet survey and administering it online has been discussed extensively in the literature (Nesbary, 2000; Sue & Ritter, 2012). Regardless of the form of data collection, provide a rationale for the procedure, using arguments based on its strengths and weaknesses, costs, data availability, and convenience. The Population and Sample In the method section, follow the type of design with characteristics of the population and the sampling procedure. Methodologists have written excellent discussions about the underlying logic of sampling theory (e.g., Babbie, 2015; Fowler, 2014). Here are essential aspects of the population and sample to describe in a research plan: • The population. Identify the population in the study. Also state the size of this population, if size can be determined, and the means of identifying individuals in the population. Questions of access arise here, and the researcher might refer to availability of sampling frames—mail or published lists—of potential respondents in the population. • Sampling design. Identify whether the sampling design for this population is single stage or multistage (called clustering). Cluster sampling is ideal when it is impossible or impractical to compile a list of the elements composing the population (Babbie, 2015). A single-stage sampling procedure is one in which the researcher has access to names in the population and can sample the people (or other elements) directly. In a multistage or clustering procedure, the researcher first identifies clusters (groups or organizations), obtains names of individuals within those clusters, and then samples within them. • Type of sampling. Identify and discuss the selection process for participants in your sample. Ideally you aim to draw a random sample, in which each individual in the population has an equal probability of being selected (a systematic or probabilistic sample). But in many cases it may be quite difficult (or impossible) to get a random sample of participants. Alternatively, a systematic sample can have precision-equivalent random sampling (Fowler, 2014). In this approach, you choose a random start on a list and select every X numbered person on the list. The X number is based on a fraction determined by the number of people on the list and the number that are to be selected on the list (e.g., 1 out of every 80th person). Finally, less desirable, but often used, is a nonprobability sample (or convenience sample), in which respondents are chosen based on their convenience and availability. • Stratification. Identify whether the study will involve stratification of the population before selecting the sample. This requires that characteristics of the population members be known so that the population can be stratified first before selecting the sample (Fowler, 2014). Stratification means that specific characteristics of individuals (e.g., gender—females and males) are represented in the sample and the sample reflects the true proportion in the population of individuals with certain characteristics. When randomly selecting people from a population, these characteristics may or may not be present in the sample in the same proportions as in the population; stratification ensures their representation. Also identify the characteristics used in stratifying the population (e.g., gender, income levels, education). Within each stratum, identify whether the sample contains individuals with the characteristic in the same proportion as the characteristic appears in the entire population. • Sample size determination. Indicate the number of people in the sample and the procedures used to compute this number. Sample size determination is at its core a tradeoff: A larger sample will provide more accuracy in the inferences made, but recruiting more participants is time consuming and costly. In survey research, investigators sometimes choose a sample size based on selecting a fraction of the population (say, 10%) or selecting a sample size that is typical based on past studies. These approaches are not optimal; instead sample size determination should be based on your analysis plans (Fowler, 2014). • Power analysis. If your analysis plan consists of detecting a significant association between variables of interest, a power analysis can help you estimate a target sample size. Many free online and commercially available power analysis calculators are available (e.g., GPower; Faul, Erdfelder, Lang, & Buchner, 2007; Faul, Erdfelder, Buchner, & Lang 2009). The input values for a formal power analysis will depend on the questions you aim to address in your survey design study (for a helpful resource, see Kraemer & Blasey, 2016). As one example, if you aim to conduct a cross-sectional study measuring the correlation between the number of overtime hours worked and burnout symptoms in a sample of emergency room nurses, you can estimate the sample size required to determine whether your correlation significantly differs from zero (e.g., one possible hypothesis is that there will be a significant positive association between number of hours worked and emotional exhaustion burnout symptoms). This power analysis requires just three pieces of information: o An estimate of the size of correlation (r). A common approach for generating this estimate is to find similar studies that have reported the size of the correlation between hours worked and burnout symptoms. This simple task can often be difficult, either because there are no published studies looking at this association or because suitable published studies do not report a correlation coefficient. One tip: In cases where a published report measures variables of interest to you, one option is to contact the study authors asking them to kindly provide the correlation analysis result from their dataset, for your power analysis. o A two-tailed alpha value (α). This value is called the Type I error rate and refers to the risk we want to take in saying we have a real non-zero correlation when in fact this effect is not real (and determined by chance), that is, a false positive effect. A commonly accepted alpha value is .05, which refers to a 5% probability (5/100) that we are comfortable making a Type I error, such that 5% of the time we will say that there’s a significant (non-zero) relationship between number of hours worked and burnout symptoms when in fact this effect occurred by chance and is not real. o A beta value (β). This value is called the Type II error rate and refers to the risk we want to take in saying we do not have a significant effect when in fact there is a significant association, that is, a false negative effect. Researchers commonly try to balance the risks of making Type I versus Type II errors, with a commonly accepted beta value being .20. Power analysis calculators will commonly ask for estimated power, which refers to 1 − beta (1 − .20 = .80). • You can then plug these numbers into a power analysis calculator to determine the sample size needed. If you assume that the estimated association is r = .25, with a two-tailed alpha value of .05 and a beta value of .20, the power analysis calculation indicates that you need at least 123 participants in the study you aim to conduct. • To get some practice, try conducting this sample size determination power analysis. We used the GPower software program (Faul et al., 2007; Faul et al., 2009), with the following input parameters: o Test family: Exact o Statistical test: Correlation: Bivariate normal model o Type of power analysis: A priori: Compute required sample size o Tails: Two o Correlation ρ H1: .25 o α err prob: .05 o Power (1 – β err prob): .8 o Correlation ρ H0: 0 • This power analysis for sample size determination should be done during study planning prior to enrolling any participants. Many scientific journals now require researchers to report a power analysis for sample size determination in the Method section. Instrumentation As part of rigorous data collection, the proposal developer also provides detailed information about the actual survey instruments to be used in the study. Consider the following: • Name the survey instruments used to collect data. Discuss whether you used an instrument designed for this research, a modified instrument, or an instrument developed by someone else. For example, if you aim to measure perceptions of stress over the last month, you could use the 10-item Perceived Stress Scale (PSS) (Cohen, Kamarck, & Mermelstein, 1983) as your stress perceptions instrument in your survey design. Many survey instruments, including the PSS, can be acquired and used for free as long as you cite the original source of the instrument. But in some cases, researchers have made the use of their instruments proprietary, requiring a fee for use. Instruments are increasingly being delivered through a multitude of online survey products now available (e.g., Qualtrics, Survey Monkey). Although these products can be costly, they also can be quite helpful for accelerating and improving the survey research process. For example, researchers can create their own surveys quickly using custom templates and post them on websites or e-mail them to participants to complete. These software programs facilitate data collection into organized spreadsheets for data analysis, reducing data entry errors and accelerating hypothesis testing. • Validity of scores using the instrument. To use an existing instrument, describe the established validity of scores obtained from past use of the instrument. This means reporting efforts by authors to establish validity in quantitative research—whether you can draw meaningful and useful inferences from scores on the instruments. The three traditional forms of validity to look for are (a) content validity (Do the items measure the content they were intended to measure?), (b) predictive or concurrent validity (Do scores predict a criterion measure? Do results correlate with other results?), and (c) construct validity (Do items measure hypothetical constructs or concepts?). In more recent studies, construct validity has become the overriding objective in validity, and it has focused on whether the scores serve a useful purpose and have positive consequences when they are used in practice (Humbley & Zumbo, 1996). Establishing the validity of the scores in a survey helps researchers to identify whether an instrument might be a good one to use in survey research. This form of validity is different from identifying the threats to validity in experimental research, as discussed later in this chapter. • Reliability of scores on the instrument. Also mention whether scores resulting from past use of the instrument demonstrate acceptable reliability. Reliability in this context refers to the consistency or repeatability of an instrument. The most important form of reliability for multi-item instruments is the instrument’s internal consistency—which is the degree to which sets of items on an instrument behave in the same way. This is important because your instrument scale items should be assessing the same underlying construct, so these items should have suitable intercorrelations. A scale’s internal consistency is quantified by a Cronbach’s alpha (α)value that ranges between 0 and 1, with optimal values ranging between .7 and .9. For example, the 10-item PSS has excellent internal consistency across many published reports, with the original source publication reporting internal consistency values of α = .84–.86 in three studies (Cohen, Kamarck, and Mermelstein, 1983). It can also be helpful to evaluate a second form of instrument reliability, its test-retest reliability. This form of reliability concerns whether the scale is reasonably stable over time with repeated administrations. When you modify an instrument or combine instruments in a study, the original validity and reliability may not hold for the new instrument, and it becomes important to establish validity and reliability during data analysis. • Sample items. Include sample items from the instrument so that readers can see the actual items used. In an appendix to the proposal, attach sample items or the entire instrument (or instruments) used. • Content of instrument. Indicate the major content sections in the instrument, such as the cover letter (Dillman, 2007, provides a useful list of items to include in cover letters), the items (e.g., demographics, attitudinal items, behavioral items, factual items), and the closing instructions. Also mention the type of scales used to measure the items on the instrument, such as continuous scales (e.g., strongly agree to strongly disagree) and categorical scales (e.g., yes/no, rank from highest to lowest importance). • Pilot testing. Discuss plans for pilot testing or field-testing the survey and provide a rationale for these plans. This testing is important to establish the content validity of scores on an instrument; to provide an initial evaluation of the internal consistency of the items; and to improve questions, format, and instructions. Pilot testing all study materials also provides an opportunity to assess how long the study will take (and to identify potential concerns with participant fatigue). Indicate the number of people who will test the instrument and the plans to incorporate their comments into final instrument revisions. • Administering the survey. For a mailed survey, identify steps for administering the survey and for following up to ensure a high response rate. Salant and Dillman (1994) suggested a four-phase administration process (see Dillman, 2007, for a similar three-phase process). The first mail-out is a short advance-notice letter to all members of the sample, and the second mail-out is the actual mail survey, distributed about 1 week after the advance-notice letter. The third mail-out consists of a postcard follow-up sent to all members of the sample 4 to 8 days after the initial questionnaire. The fourth mail-out, sent to all nonrespondents, consists of a personalized cover letter with a handwritten signature, the questionnaire, and a preaddressed return envelope with postage. Researchers send this fourth mail-out 3 weeks after the second mail-out. Thus, in total, the researcher concludes the administration period 4 weeks after its start, providing the returns meet project objectives. Variables in the Study Although readers of a proposal learn about the variables in purpose statements and research questions/hypotheses sections, it is useful in the method section to relate the variables to the specific questions or hypotheses on the instrument. One technique is to relate the variables, the research questions or hypotheses, and sample items on the survey instrument so that a reader can easily determine how the data collection connects to the variables and questions/hypotheses. Plan to include a table and a discussion that crossreference the variables, the questions or hypotheses, and specific survey items. This procedure is especially helpful in dissertations in which investigators test large-scale models or multiple hypotheses. Table 8.2 illustrates such a table using hypothetical data. Data Analysis In the proposal, present information about the computer programs used and the steps involved in analyzing the data. Websites contain detailed information about the various statistical analysis computer programs available. Some of the more frequently used programs are the following: • IBM SPSS Statistics 24 for Windows and Mac (www.spss.com). The SPSS Grad Pack is an affordable, professional analysis program for students based on the professional version of the program, available from IBM. • JMP (www.jmp.com). This is a popular software program available from SAS. • Minitab Statistical Software 17 (minitab.com). This is an interactive software statistical package available from Minitab Inc. • SYSTAT 13 (systatsoftware.com). This is a comprehensive interactive statistical package available from Systat Software, Inc. • SAS/STAT (sas.com). This is a statistical program with tools as an integral component of the SAS system of products available from SAS Institute, Inc. • Stata, release 14 (stata.com). This is a data analysis and statistics program available from StataCorp. Online programs useful in simulating statistical concepts for statistical instruction can also be used, such as the Rice Virtual Lab in Statistics found at http://onlinestatbook.com/rvls.html, or SAS Simulation Studio for JMP (www.jmp.com), which harnesses the power of simulation to model and analyze critical operational systems in such areas as health care, manufacturing, and transportation. The graphical user interface in SAS Simulation Studio for JMP requires no programming and provides a full set of tools for building, executing, and analyzing results of simulation models (Creswell & Guetterman, in press). We recommend the following research tip—presenting data analysis plans as a series of steps so that a reader can see how one step leads to another: Step 1. Report information about the number of participants in the sample who did and did not return the survey. A table with numbers and percentages describing respondents and nonrespondents is a useful tool to present this information. Step 2. Discuss the method by which response bias will be determined. Response bias is the effect of nonresponses on survey estimates (Fowler, 2014). Bias means that if nonrespondents had responded, their responses would have substantially changed the overall results. Mention the procedures used to check for response bias, such as wave analysis or a respondent/nonrespondent analysis. In wave analysis, the researcher examines returns on select items week by week to determine if average responses change (Leslie, 1972). Based on the assumption that those who return surveys in the final weeks of the response period are nearly all nonrespondents, if the responses begin to change, a potential exists for response bias. An alternative check for response bias is to contact a few nonrespondents by phone and determine if their responses differ substantially from respondents. This constitutes a respondent-nonrespondent check for response bias. Step 3. Discuss a plan to provide a descriptive analysis of data for all independent and dependent variables in the study. This analysis should indicate the means, standard deviations, and range of scores for these variables. Identify whether there is missing data (e.g., some participants may not provide responses to some items or whole scales), and develop plans to report how much missing data is present and whether a strategy will be implemented to replace missing data (for a review, see Schafer & Graham, 2002). Step 4. If the proposal contains an instrument with multi-item scales or a plan to develop scales, first evaluate whether it will be necessary to reverse-score items, and then how total scale scores will be calculated. Also mention reliability checks for the internal consistency of the scales (i.e., the Cronbach alpha statistic). Step 5. Identify the statistics and the statistical computer program for testing the major inferential research questions or hypotheses in the proposed study. The inferential questions or hypotheses relate variables or compare groups in terms of variables so that inferences can be drawn from the sample to a population. Provide a rationale for the choice of statistical test and mention the assumptions associated with the statistic. As shown in Table 8.3, base this choice on the nature of the research question (e.g., relating variables or comparing groups as the most popular), the number of independent and dependent variables, and the variables used as covariates (e.g., see Rudestam & Newton, 2014). Further, consider whether the variables will be measured on an instrument as a continuous score (e.g., age from 18 to 36) or as a categorical score (e.g., women = 1, men = 2). Finally, consider whether the scores from the sample might be normally distributed in a bellshaped curve if plotted out on a graph or non-normally distributed. There are additional ways to determine if the scores are normally distributed (see Creswell, 2012). These factors, in combination, enable a researcher to determine what statistical test will be suited for answering the research question or hypothesis. In Table 8.3, we show how the factors, in combination, lead to the selection of a number of common statistical tests. For additional types of statistical tests, readers are referred to statistics methods books, such as Gravetter and Wallnau (2012). Step 6. A final step in the data analysis is to present the results in tables or figures and interpret the results from the statistical test, discussed in the next section. Interpreting Results and Writing a Discussion Section An interpretation in quantitative research means that the researcher draws conclusions from the results for the research questions, hypotheses, and the larger meaning of the results. This interpretation involves several steps: • Report how the results addressed the research question or hypothesis. The Publication Manual of the American Psychological Association (American Psychological Association [APA], 2010) suggests that the most complete meaning of the results come from reporting extensive description, statistical significance testing, confidence intervals, and effect sizes. Thus, it is important to clarify the meaning of these last three reports of the results. The statistical significance testing reports an assessment as to whether the observed scores reflect a pattern other than chance. A statistical test is considered to be significant if the results are unlikely by chance to have occurred, and the null hypothesis of “no effect” can be rejected. The researcher sets a rejection level of “no effect,” such as p = 0.001, and then assesses whether the test statistic falls into this level of rejection. Typically results will be summarized as “the analysis of variance revealed a statistically significant difference between men and women in terms of attitudes toward banning smoking in restaurants F (2, 6) = 8.55, p = 0.001.” • Two forms of practical evidence of the results should also be reported: (a) the effect size and (b) the confidence interval. A confidence interval is a range of values (an interval) that describes a level of uncertainty around an estimated observed score. A confidence interval shows how good an estimated score might be. A confidence interval of 95%, for example, indicates that 95 out of 100 times the observed score will fall in the range of values. An effect size identifies the strength of the conclusions about group differences or the relationships among variables in quantitative studies. It is a descriptive statistic that is not dependent on whether the relationship in the data represents the true population. The calculation of effect size varies for different statistical tests: it can be used to explain the variance between two or more variables or the differences among means for groups. It shows the practical significance of the results apart from inferences being applied to the population. • The final step is to draft a discussion section where you discuss the implications of the results in terms of how they are consistent with, refute, or extend previous related studies in the scientific literature. How do your research findings address gaps in our knowledge base on the topic? It is also important to acknowledge the implications of the findings for practice and for future research in the area. It may also involve discussing theoretical and practical consequences of the results. It is also helpful to briefly acknowledge potential limitations of the study, and potential alternative explanations for the study findings. Example 8.1 is a survey method plan section that illustrates many of the steps just mentioned. This excerpt (used with permission) comes from a journal article reporting a study of factors affecting student attrition in one small liberal arts college (Bean & Creswell, 1980, pp. 321–322). Example 8.1 A Survey Method Plan Methodology The site of this study was a small (enrollment 1,000), religious, coeducational, liberal arts college in a Midwestern city with a population of 175,000 people. [Authors identified the research site and population.] The dropout rate the previous year was 25%. Dropout rates tend to be highest among freshmen and sophomores, so an attempt was made to reach as many freshmen and sophomores as possible by distribution of the questionnaire through classes. Research on attrition indicates that males and females drop out of college for different reasons (Bean, 1978, in press; Spady, 1971). Therefore, only women were analyzed in this study. During April 1979, 169 women returned questionnaires. A homogeneous sample of 135 women who were 25 years old or younger, unmarried, full-time U.S. citizens, and Caucasian was selected for this analysis to exclude some possible confounding variables (Kerlinger, 1973). Of these women, 71 were freshmen, 55 were sophomores, and 9 were juniors. Of the students, 95% were between the ages of 18 and 21. This sample is biased toward higher-ability students as indicated by scores on the ACT test. [Authors presented descriptive information about the sample.] Data were collected by means of a questionnaire containing 116 items. The majority of these were Likert-like items based on a scale from “a very small extent” to “a very great extent.” Other questions asked for factual information, such as ACT scores, high school grades, and parents’ educational level. All information used in this analysis was derived from questionnaire data. This questionnaire had been developed and tested at three other institutions before its use at this college. [Authors discussed the instrument.] Concurrent and convergent validity (Campbell & Fiske, 1959) of these measures was established through factor analysis, and was found to be at an adequate level. Reliability of the factors was established through the coefficient alpha. The constructs were represented by 25 measures—multiple items combined on the basis of factor analysis to make indices—and 27 measures were single item indicators. [Validity and reliability were addressed.] Multiple regression and path analysis (Heise, 1969; Kerlinger & Pedhazur, 1973) were used to analyze the data. In the causal model . . . , intent to leave was regressed on all variables which preceded it in the causal sequence. Intervening variables significantly related to intent to leave were then regressed on organizational variables, personal variables, environmental variables, and background variables. [Data analysis steps were presented.] Components of an Experimental Study Method Plan An experimental method plan follows a standard form: (a) participants and design, (b) procedure, and (c) measures. These three sequential sections generally are sufficient (often in studies with a few measures, the procedure and measures sections are combined into a single procedure section). In this section of the chapter, we review these components as well as information regarding key features of experimental design and corresponding statistical analyses. As with the section on survey design, the intent here is to highlight key topics to be addressed in an experimental method plan. An overall guide to these topics is found by answering the questions on the checklist shown in Table 8.4. Participants Readers need to know about the selection, assignment, and number of participants who will take part in the experiment. Consider the following suggestions when writing the method section plan for an experiment: • Describe the procedures for recruiting participants to be in the study, and any selection processes used. Often investigators aim to recruit a study sample that shares certain characteristics by formally stating specific inclusion and exclusion study criteria when designing their study (e.g., inclusion criterion: participants must be English language speaking; exclusion criterion: participants must not be children under the age of 18). Recruitment approaches are wide-ranging, and can include random digit dialing of households in a community, posting study recruitment flyers or e-mails to targeted communities, or newspaper advertisements. Describe the recruitment approaches that will be used and the study compensation provided for participating. • One of the principal features distinguishing an experiment from a survey study design is the use of random assignment. Random assignment is a technique for placing participants into study conditions of a manipulated variable of interest. When individuals are randomly assigned to groups, the procedure is called a true experiment. If random assignment is used, discuss how and when the study will randomly assign individuals to treatment groups, which in experimental studies are referred to as levels of an independent variable. This means that of the pool of participants, Individual 1 goes to Group 1, Individual 2 to Group 2, and so forth so that there is no systematic bias in assigning the individuals. This procedure eliminates the possibility of systematic differences among characteristics of the participants that could affect the outcomes so that any differences in outcomes can be attributed to the study’s manipulated variable (or variables) of interest (Keppel & Wickens, 2003). Often experimental studies may be interested in both randomly assigning participants to levels of a manipulated variable of interest (e.g., a new treatment approach for teaching fractions to children versus the traditional approach) while also measuring a second predictor variable of interest that cannot utilize random assignment (e.g., measuring whether the treatment benefits are larger among female compared to male children; it is impossible to randomly assign children to be male or female). Designs in which a researcher has only partial (or no) control over randomly assigning participants to levels of a manipulated variable of interest are called quasi-experiments. • Conduct and report a power analysis for sample size determination (for a helpful resource, see Kraemer & Blasey, 2016). The procedures for a sample size power analysis mimic those for a survey design, although the focus shifts to estimating the number of participants needed in each condition of the experiment to detect significant group differences. In this case, the input parameters shift to include an estimate of the effect size referencing the estimated differences between the groups of your manipulated variable(s) of interest and the number of groups in your experiment. Readers are encouraged to review the power analysis section earlier in the survey design portion of this chapter and then consider the following example: o Previously we introduced a cross-sectional survey design assessing the relationship between number of overtime hours worked and burnout symptoms among nurses. We might decide to conduct an experiment to test a related question: Do nurses working full time have higher burnout symptoms compared to nurses working part time? In this case, we might conduct an experiment in which nurses are randomly assigned to work either full time (group 1) or part time (group 2) for 2 months, at which time we could measure burnout symptoms. We could conduct a power analysis to evaluate the sample size needed to detect a significant difference in burnout symptoms between these two groups. Previous literature might indicate an effect size difference between these two groups at d = .5, and as with our survey study design, we can assume a two-tailed alpha = .05 and beta = .20. We ran the calculation again using the GPower software program (Faul et al., 2007; Faul et al., 2009) to estimate the sample size needed to detect a significant difference between groups: Test family: t tests Statistical test: Means: difference between two independent means (two groups) Type of power analysis: A priori: Compute required sample size Tails: Two Effect size d: .5 α err prob: .05 Power (1 – β err prob): .8 Allocation ratio N2/N1: 1 o With these input parameters, the power analysis indicates a total sample size of 128 participants (64 in each group) is needed in order to detect a significant difference between groups in burnout symptoms. • At the end of the participants section, it is helpful to provide a formal experimental design statement that specifies the independent variables and their corresponding levels. For example, a formal design statement might read, “The experiment consisted of a one-way two-groups design comparing burnout symptoms between full-time and part-time nurses.” Variables The variables need to be specified in the formal design statement and described (in detail) in the procedure section of the experimental method plan. Here are some suggestions for developing ideas about variables in a proposal: • Clearly identify the independent variables in the experiment (recall the discussion of variables in Chapter 3) and how they will be manipulated in the study. One common approach is to conduct a 2 × 2 between-subjects factorial design in which two independent variables are manipulated in a single experiment. If this is the case, it is important to clarify how and when each independent variable is manipulated. • Include a manipulation check measure that evaluates whether your study successfully manipulated the independent variable(s) of interest. A manipulation check measure is defined as a measure of the intended manipulated variable of interest. For example, if a study aims to manipulate selfesteem by offering positive test feedback (high self-esteem condition) or negative test feedback (low self-esteem condition) using a performance task, it would be helpful to quantitatively evaluate whether there are indeed self-esteem differences between these two conditions with a manipulation check measure. After this self-esteem study manipulation, a researcher may include a brief measure of state self-esteem as a manipulation check measure prior to administering the primary outcome measures of interest. • Identify the dependent variable or variables (i.e., the outcomes) in the experiment. The dependent variable is the response or the criterion variable presumed to be caused by or influenced by the independent treatment conditions. One consideration in the experimental method plan is whether there are multiple ways to measure outcome(s) of interest. For example, if the primary outcome is aggression, it may be possible to collect multiple measures of aggression in your experiment (e.g., a behavioral measure of aggression in response to a provocation, self-reported perceptions of aggression). • Identify other variables to be measured in the study. Three categories of variables are worth mentioning. First, include measures of participant demographic characteristics (e.g., age, gender, ethnicity). Second, measure variables that may contribute noise to the study design. For example, self-esteem levels may fluctuate during the day (and relate to the study outcome variables of interest) and so it may be beneficial to measure and record time of day in the study (and then use it as a covariate in study statistical analyses). Third, measure variables that may be potential confounding variables. For example, a critic of the selfesteem manipulation may say that the positive/negative performance feedback study manipulation also unintentionally manipulated rumination, and it was this rumination that is a better explanation for study results on the outcomes of interest. By measuring rumination as a potential confounding variable of interest, the researcher can quantitatively evaluate this critic’s claim. Instrumentation and Materials Just like in a survey method plan, a sound experimental study plan calls for a thorough discussion about the instruments used—their development, their items, their scales, and reports of reliability and validity of scores on past uses. However, an experimental study plan also describes in detail the approach for manipulating the independent variables of interest: • Thoroughly discuss the materials used for the manipulated variable(s) of interest. One group, for example, may participate in a special computer-assisted learning plan used by a teacher in a classroom. This plan might involve handouts, lessons, and special written instructions to help students in this experimental group learn how to study a subject using computers. A pilot test of these materials may also be discussed, as well as any training required to administer the materials in a standardized way. • Often the researcher does not want participants to know what variables are being manipulated or the condition they have been assigned to (and sometimes what the primary outcome measures of interest are). It is important, then, to draft a cover story that will be used to explain the study and procedures to participants during the experiment. If any deception is used in the study, it is important to draft a suitable debriefing approach and to get all procedures and materials approved by your institution’s IRB (see Chapter 4). Experimental Procedures The specific experimental design procedures also need to be identified. This discussion involves indicating the overall experiment type, citing reasons for the design, and advancing a visual model to help the reader understand the procedures. • Identify the type of experimental design to be used in the proposed study. The types available in experiments are pre-experimental designs, quasi-experiments, and true experiments. With pre-experimental designs, the researcher studies a single group and implements an intervention during the experiment. This design does not have a control group to compare with the experimental group. In quasiexperiments, the investigator uses control and experimental groups, but the design may have partial or total lack of random assignment to groups. In a true experiment, the investigator randomly assigns the participants to treatment groups. A single-subject design or N of 1 design involves observing the behavior of a single individual (or a small number of individuals) over time. • Identify what is being compared in the experiment. In many experiments, those of a type called between-subject designs, the investigator compares two or more groups (Keppel & Wickens, 2003; Rosenthal & Rosnow, 1991). For example, a factorial design experiment, a variation on the between-group design, involves using two or more treatment variables to examine the independent and simultaneous effects of these treatment variables on an outcome (Vogt & Johnson, 2015). This widely used experimental design explores the effects of each treatment separately and also the effects of variables used in combination, thereby providing a rich and revealing multidimensional view. In other experiments, the researcher studies only one group in what is called a withingroup design. For example, in a repeated measures design, participants are assigned to different treatments at different times during the experiment. Another example of a within-group design would be a study of the behavior of a single individual over time in which the experimenter provides and withholds a treatment at different times in the experiment to determine its impact. Finally, studies that include both a between-subjects and a within-subjects variable are called mixed designs. • Provide a diagram or a figure to illustrate the specific research design to be used. A standard notation system needs to be used in this figure. As a research tip, we recommend using the classic notation system provided by Campbell and Stanley (1963, p. 6): o X represents an exposure of a group to an experimental variable or event, the effects of which are to be measured. o O represents an observation or measurement recorded on an instrument. o Xs and Os in a given row are applied to the same specific persons. Xs and Os in the same column, or placed vertically relative to each other, are simultaneous. o The left-to-right dimension indicates the temporal order of procedures in the experiment (sometimes indicated with an arrow). o The symbol R indicates random assignment. o Separation of parallel rows by a horizontal line indicates that comparison groups are not equal (or equated) by random assignment. No horizontal line between the groups displays random assignment of individuals to treatment groups. In Examples 8.2–8.5, this notation is used to illustrate pre-experimental, quasiexperimental, true experimental, and single-subject designs. Example 8.2 Pre-experimental Designs One-Shot Case Study This design involves an exposure of a group to a treatment followed by a measure. • Group A X_____________________O One-Group Pretest-Posttest Design This design includes a pretest measure followed by a treatment and a posttest for a single group. • Group A O1————X————O2 Static Group Comparison or Posttest-Only With Nonequivalent Groups Experimenters use this design after implementing a treatment. After the treatment, the researcher selects a comparison group and provides a posttest to both the experimental group(s) and the comparison group(s). • Group A X______________________O • Group B _______________________O Alternative Treatment Posttest-Only With Nonequivalent Groups Design This design uses the same procedure as the Static Group Comparison, with the exception that the nonequivalent comparison group received a different treatment. • Group A X1_____________________O • Group B X2_____________________O Example 8.3 Quasi-experimental Designs Nonequivalent (Pretest and Posttest) Control-Group Design In this design, a popular approach to quasi-experiments, the experimental Group A and the control Group B are selected without random assignment. Both groups take a pretest and posttest. Only the experimental group receives the treatment. • Group A O————X————O • ___________________________ • Group B O—————————O Single-Group Interrupted Time-Series Design In this design, the researcher records measures for a single group both before and after a treatment. • Group A O—O—O—O—X—O—O—O—O Control-Group Interrupted Time-Series Design This design is a modification of the Single-Group Interrupted Time-Series design in which two groups of participants, not randomly assigned, are observed over time. A treatment is administered to only one of the groups (i.e., Group A). • Group A O—O—O—O—X—O—O—O—O • __________________________________ • Group B O—O—O—O—O—O—O—O—O Example 8.4 True Experimental Designs Pretest–Posttest Control-Group Design A traditional, classical design, this procedure involves random assignment of participants to two groups. Both groups are administered both a pretest and a posttest, but the treatment is provided only to experimental Group A. • Group A R——–––O———X———O • Group B R———O———————O Posttest-Only Control-Group Design This design controls for any confounding effects of a pretest and is a popular experimental design. The participants are randomly assigned to groups, a treatment is given only to the experimental group, and both groups are measured on the posttest. • Group A R——————X—————O • Group B R————————————O Solomon Four-Group Design A special case of a 2 × 2 factorial design, this procedure involves the random assignment of participants to four groups. Pretests and treatments are varied for the four groups. All groups receive a posttest. • Group A R————O———X———O • Group B R————O———————O • Group C R———————X————O • Group D R——————————–—O Example 8.5 Single-Subject Designs A-B-A Single-Subject Design This design involves multiple observations of a single individual. The target behavior of a single individual is established over time and is referred to as a baseline behavior. The baseline behavior is assessed, the treatment provided, and then the treatment is withdrawn. • Baseline A Treatment B Baseline A • O–O–O–O–O–X–X–X–X–X–O–O–O–O–O–O Threats to Validity There are several threats to validity that will raise questions about an experimenter’s ability to conclude that the manipulated variable(s) of interest affect an outcome and not some other factor. Experimental researchers need to identify potential threats to the internal validity of their experiments and design them so that these threats will not likely arise or are minimized. There are two types of threats to validity: (a) internal threats and (b) external threats. • Internal validity threats are experimental procedures, treatments, or experiences of the participants that threaten the researcher’s ability to draw correct inferences from the data about the population in an experiment. Table 8.5 displays these threats, provides a description of each one of them, and suggests potential responses by the researcher so that the threat may not occur. There are those involving participants (i.e., history, maturation, regression, selection, and mortality), those related to the use of an experimental treatment that the researcher manipulates (i.e., diffusion, compensatory and resentful demoralization, and compensatory rivalry), and those involving procedures used in the experiment (i.e., testing and instruments). Source: Adapted from Creswell (2012). • Potential threats to external validity also must be identified and designs created to minimize these threats. External validity threats arise when experimenters draw incorrect inferences from the sample data to other persons, other settings, and past or future situations. As shown in Table 8.6, these threats arise because of the characteristics of individuals selected for the sample, the uniqueness of the setting, and the timing of the experiment. For example, threats to external validity arise when the researcher generalizes beyond the groups in the experiment to other racial or social groups not under study, to settings not examined, or to past or future situations. Steps for addressing these potential issues are also presented in Table 8.6. • Other threats that might be mentioned in the method section are the threats to statistical conclusion validity that arise when experimenters draw inaccurate inferences from the data because of inadequate statistical power or the violation of statistical assumptions. Threats to construct validity occur when investigators use inadequate definitions and measures of variables. Practical research tips for proposal writers to address validity issues are as follows: • Identify the potential threats to validity that may arise in your study. A separate section in a proposal may be composed to advance this threat. • Define the exact type of threat and what potential issue it presents to your study. • Discuss how you plan to address the threat in the design of your experiment. • Cite references to books that discuss the issue of threats to validity, such as Cook and Campbell (1979); Shadish, Cook, & Campbell (2001); and Tuckman (1999). The Procedure A researcher needs to describe in detail the sequential step-by-step procedure for conducting the experiment. A reader should be able to clearly understand the cover story, the design being used, the manipulated variable(s) and outcome variable(s), and the timeline of activities. It is also important to describe steps taken to minimize noise and bias in the experimental procedures (e.g., “To reduce the risk of experimenter bias, the experimenter was blind to the participant’s study condition until all outcome measures were assessed.”). • Discuss a step-by-step approach for the procedure in the experiment. For example, Borg and Gall (2006) outlined steps typically used in the procedure for a pretest-posttest control group design with matching participants in the experimental and control groups: 1. Administer measures of the dependent variable or a variable closely correlated with the dependent variable to the research participants. Source: Adapted from Creswell (2012). 2. Assign participants to matched pairs on the basis of their scores on the measures described in Step 1. 3. Randomly assign one member of each pair to the experimental group and the other member to the control group. 4. Expose the experimental group to the experimental treatment and administer no treatment or an alternative treatment to the control group. 5. Administer measures of the dependent variables to the experimental and control groups. 6. Compare the performance of the experimental and control groups on the posttest(s) using tests of statistical significance. Data Analysis Tell the reader about the types of statistical analyses that will be implemented on the dataset. • Report the descriptive statistics. Some descriptive statistics that are commonly reported include frequencies (e.g., how many male and female participants were in the study?), means and standard deviations (e.g., what’s the mean age of the sample; what are the group means and corresponding standard deviation values for the primary outcome measures?). • Indicate the inferential statistical tests used to examine the hypotheses in the study. For experimental designs with categorical information (groups) on the independent variable and continuous information on the dependent variable, researchers use t tests or univariate analysis of variance (ANOVA), analysis of covariance (ANCOVA), or multivariate analysis of variance (MANOVA—multiple dependent measures). (Several of these tests are mentioned in Table 8.3, which was presented earlier.) In factorial designs where more than one independent variable is manipulated, you can test for main effects (of each independent variable) and interactions between independent variables. Also, indicate the practical significance by reporting effect sizes and confidence intervals. • For single-subject research designs, use line graphs for baseline and treatment observations for abscissa (horizontal axis) units of time and the ordinate (vertical axis) target behavior. Researchers plot each data point separately on the graph, and connect the data points with lines (e.g., see Neuman & McCormick, 1995). Occasionally, tests of statistical significance, such as t tests, are used to compare the pooled mean of the baseline and the treatment phases, although such procedures may violate the assumption of independent measures (Borg & Gall, 2006). Interpreting Results and Writing a Discussion Section The final step in an experiment is to interpret the findings in light of the hypotheses or research questions and to draft a discussion section. In this interpretation, address whether the hypotheses or questions were supported or whether they were refuted. Consider whether the independent variable manipulation was effective (a manipulation check measure can be helpful in this regard). Suggest why the results were significant, or why they were not, linking the new evidence with past literature (Chapter 2), the theory used in the study (Chapter 3), or persuasive logic that might explain the results. Address whether the results might have been influenced by unique strengths of the approach, or weaknesses (e.g., threats to internal validity), and indicate how the results might be generalized to certain people, settings, and times. Finally, indicate the implications of the results, including implications for future research on the topic. Example 8.6 is a description of an experimental method plan adapted from a value affirmation stress study published by Creswell and colleagues (Creswell et al., 2005). Example 8.6 An Experimental Method Plan This study tested the hypothesis that thinking about one’s important personal values in a self-affirmation activity could buffer subsequent stress responses to a laboratory stress challenge task. The specific study hypothesis was that the self-affirmation group, relative to the control group, would have lower salivary cortisol stress hormone responses to a stressful performance task. Here we highlight a plan for organizing the methodological approach for conducting this study. For a full description of the study methods and findings, see the published paper (Creswell et al., 2005). Method Participants A convenience sample of eighty-five undergraduates will be recruited from a large public university on the west coast, and compensated with course credit or $30. This sample size is justified based on a power analysis conducted prior to data collection with the software program GPower (Faul et al., 2007; Faul et al., 2009), based on [specific input parameters described here for the power analysis]. Participants will be eligible to participate if they meet the following study criteria [list study inclusion and exclusion criteria here]. All study procedures have been approved by the University of California, Los Angeles Institutional Review Board, and participants will provide written informed consent prior to participating in study related activities. The study is a 2 × 4 mixed design, with value affirmation condition as a two-level between subjects variable (condition: value affirmation or control) and time as a four-level within-subjects variable (time: baseline, 20 minutes post-stress, 30 minutes post-stress, and 45 minutes post-stress). The primary outcome measure is the stress hormone cortisol, as measured by saliva samples. Procedure To control for the circadian rhythm of cortisol, all laboratory sessions will be scheduled between the hours of 2:30 pm and 7:30 pm. Participants will be run through the laboratory procedures one at a time. The cover story consists of telling participants that the study is interested in studying physiological responses to laboratory performance tasks. Upon arrival all participants will complete an initial values questionnaire where they will rank order five personal values. After a 10-minute acclimation period, participants will provide a baseline saliva sample, for the assessment of salivary cortisol levels. Participants will then receive instructions on the study tasks and then will be randomly assigned by the experimenter (using a random number generator) to either a value affirmation or control condition, where they will be asked to [description of the value affirmation independent variable manipulation here, along with the subsequent manipulation check measure]. All participants will then complete the laboratory stress challenge task [description of the stress challenge task procedures for producing a stress response here]. After the stress task, participants will complete multiple post-stress task questionnaire measures [describe them here], and then provide saliva samples at 20, 30, and 45 minutes post-stress task onset. After providing the last saliva sample, participants will be debriefed, compensated, and dismissed. Summary This chapter identified essential components for organizing a methodological approach and plan for conducting either a survey or an experimental study. The outline of steps for a survey study began with a discussion about the purpose, the identification of the population and sample, the survey instruments to be used, the relationship between the variables, the research questions, specific items on the survey, and steps to be taken in the analysis and the interpretation of the data from the survey. In the design of an experiment, the researcher identifies participants in the study, the variables—the manipulated variable(s) of interest and the outcome variables—and the instruments used. The design also includes the specific type of experiment, such as a pre-experimental, quasiexperimental, true experiment, or single-subject design. Then the researcher draws a figure to illustrate the design, using appropriate notation. This is followed by comments about potential threats to internal and external validity (and possibly statistical and construct validity) that relate to the experiment, the statistical analyses used to test the hypotheses or research questions, and the interpretation of the results. ok now based on this lecture notes Design a plan for the procedures to be used in a survey study. Review the checklist in Table 8.1 after you write the section to determine if all components have been addressed. ( should be related to my research study Topic: Investigating the Relationship Between the Implementation of Electronic Health Records (EHRs) and Patient Care Quality in U.S. Hospitals

    Descriptive Questions:

    1. What is the level of Electronic Health Record (EHR) implementation among hospitals in the United States? o Focus: Independent Variable (EHR implementation) o Purpose: To describe how extensively EHR systems are adopted across U.S. hospitals (e.g., fully implemented, partially implemented, not implemented).

    2. What are the current patient care quality metrics in U.S. hospitals? o Focus: Dependent Variable (Patient care quality) o Purpose: To assess patient care quality using indicators such as patient safety incidents, adherence to clinical guidelines, and patient satisfaction scores.

    3. What types of EHR systems are most commonly used in U.S. hospitals? o Focus: Independent Variable (Types of EHR systems) o Purpose: To identify which EHR platforms or functionalities are prevalent in the healthcare industry.

    4. What are the characteristics of hospitals in terms of size, location, and type? o Focus: Control Variables (Hospital characteristics) o Purpose: To gather data on factors like hospital bed count, urban vs. rural setting, and whether the hospital is public or private.

    Inferential Questions:

    1. Is there a significant relationship between the level of EHR implementation and patient care quality in U.S. hospitals? o Focus: Relating Independent Variable (EHR implementation) to Dependent Variable (Patient care quality) o Purpose: To determine if higher levels of EHR adoption are associated with improved patient care outcomes.

    2. Do hospitals with fully implemented EHR systems report better patient care quality metrics than those with partial or no EHR implementation? o Focus: Comparing Groups Based on Independent Variable o Purpose: To compare patient care quality between different levels of EHR adoption.

    3. Does the relationship between EHR implementation and patient care quality remain significant after controlling for hospital size and location?

    o Focus: Relating Independent and Dependent Variables While Controlling for Other Variables o Purpose: To assess whether hospital characteristics influence the relationship between EHR adoption and patient care quality.

    1. Is there a significant difference in patient satisfaction scores between hospitals using advanced EHR functionalities and those using basic or no EHR systems? o Focus: Comparing Groups with Different Levels of the Independent Variable o Purpose: To evaluate if specific EHR features contribute to higher patient satisfaction.
  2. Assistant

    Method Section: Survey Study Plan

    1. Survey Design

    Purpose Statement

    The primary purpose of this study is to empirically evaluate the relationship between the level of Electronic Health Record (EHR) implementation and patient care quality in U.S. hospitals. Specifically, the study aims to assess how varying degrees of EHR adoption correlate with key patient care quality metrics, including patient safety incidents, adherence to clinical guidelines, and patient satisfaction scores.

    Rationale for Using a Survey Method

    A survey design is the preferred approach for this study due to its ability to efficiently collect quantitative data from a large and diverse sample of hospitals across the United States. Surveys facilitate the measurement of multiple variables simultaneously, including EHR implementation levels, patient care quality indicators, and hospital characteristics. Additionally, the survey method allows for rapid data collection and cost-effective administration, which is essential given the nationwide scope of the research.

    Type of Survey

    This study will employ a cross-sectional survey design, collecting data at a single point in time. This approach is suitable for examining the current state of EHR implementation and patient care quality across various hospitals without the need for longitudinal tracking.

    Data Collection Method

    Data will be collected using an online survey administered through a reputable survey platform such as Qualtrics. The choice of an online survey is justified by its wide accessibility, ease of distribution, and ability to reach a large number of respondents efficiently. Additionally, online surveys facilitate automated data entry and minimize manual errors, enhancing data integrity.

    2. Population and Sample

    Population

    The target population for this study comprises all acute care hospitals in the United States. According to the American Hospital Association (AHA) Annual Survey, there are approximately 6,090 hospitals nationwide. Hospitals eligible for inclusion must be classified as acute care facilities and have varying levels of EHR implementation.

    Sampling Design

    A multistage cluster sampling design will be employed due to the impracticality of compiling a comprehensive list of all hospitals and individually sampling from such a large population. The first stage involves stratifying hospitals based on geographic regions (e.g., Northeast, Midwest, South, West) to ensure geographic diversity. Within each region, hospitals will be grouped into clusters based on size (small, medium, large) and ownership type (public, private nonprofit, private for-profit). From each cluster, a random sample of hospitals will be selected proportionally to reflect the population distribution.

    Type of Sampling

    The study will utilize a systematic probability sampling method within each cluster. For instance, if a cluster contains 200 hospitals and a sample size of 40 is required from that cluster, every 5th hospital on the list will be selected after a random start. This method ensures that each hospital within the cluster has an equal probability of selection, enhancing the representativeness of the sample.

    Stratification

    Stratification will be based on hospital characteristics such as size (number of beds), location (urban vs. rural), and ownership type. This ensures that these critical factors are adequately represented in the sample, allowing for more precise control in subsequent analyses.

    Sample Size Determination

    A power analysis was conducted using G*Power (Faul et al., 2007) to determine the required sample size for detecting a medium effect size (f² = 0.15) in a multiple regression analysis with four predictors (EHR implementation level, hospital size, location, and ownership type) at an alpha level of 0.05 and power of 0.80. The analysis indicated that a minimum sample size of 138 hospitals is needed.

    To account for potential non-responses and incomplete surveys, the sample size will be inflated by 20%, resulting in a targeted recruitment of approximately 166 hospitals (138 / 0.80).

    3. Instrumentation

    Survey Instruments

    The study will utilize a combination of standardized instruments and custom-developed questions to measure the variables of interest:

    1. EHR Implementation Level: Adapted from the HIMSS Analytics Electronic Medical Record Adoption Model™ (EMRAM) scale, this measure categorizes hospitals into fully implemented, partially implemented, or not implemented EHR systems.

    2. Patient Care Quality Metrics:

      • Patient Safety Incidents: Measured using a modified version of the AHRQ Hospital Survey on Patient Safety Culture.
      • Adherence to Clinical Guidelines: Assessed through questions adapted from the National Quality Forum (NQF) measures.
      • Patient Satisfaction Scores: Collected using the Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) survey items.
    3. Hospital Characteristics: Questions regarding hospital size, location, and ownership type will be included, based on data from the AHA Annual Survey.

    Validity of Scores

    The instruments selected have established validity:

    • HIMSS EMRAM: Demonstrates content and construct validity in assessing EHR adoption stages (HIMSS Analytics, 2023).
    • AHRQ Hospital Survey: Shows strong content and construct validity in measuring patient safety culture (Singer et al., 2003).
    • NQF Measures: Exhibit predictive validity in assessing adherence to clinical guidelines (National Quality Forum, 2022).
    • HCAHPS: Validated for measuring patient satisfaction with high content and construct validity (Zelenski et al., 2018).

    Reliability of Scores

    Reliability has been established for all standardized instruments:

    • HIMSS EMRAM: Internal consistency α = .85.
    • AHRQ Hospital Survey: Cronbach’s α = .90 for patient safety culture.
    • HCAHPS: Cronbach’s α = .88 for patient satisfaction items.

    Sample Items

    • EHR Implementation Level:

      • "To what extent has your hospital implemented an Electronic Health Record (EHR) system?"
        • Fully implemented
        • Partially implemented
        • Not implemented
    • Patient Safety Incidents:

      • "In the past year, how often has your hospital experienced a patient safety incident?"
        • Never
        • Rarely
        • Sometimes
        • Often
    • Patient Satisfaction:

      • "Overall, how satisfied are you with the quality of care you received during your hospital stay?"
        • Very dissatisfied
        • Dissatisfied
        • Neutral
        • Satisfied
        • Very satisfied

    Content of Instrument

    The survey will consist of the following sections:

    1. Cover Letter: Explaining the purpose of the study, ensuring confidentiality, and providing instructions for completion.
    2. Demographics: Questions on hospital size (number of beds), location (urban/rural), and ownership type (public/private nonprofit/private for-profit).
    3. EHR Implementation: Items assessing the extent and type of EHR systems in use.
    4. Patient Care Quality Metrics: Items measuring patient safety incidents, adherence to clinical guidelines, and patient satisfaction scores.
    5. Closing Instructions: Thanking respondents and providing contact information for follow-up.

    Pilot Testing

    A pilot survey will be administered to 15 hospitals not included in the final sample to assess the clarity, relevance, and reliability of the survey items. Feedback from the pilot will be used to refine question wording, order, and survey flow. Additionally, Cronbach’s alpha will be calculated for multi-item scales to ensure internal consistency before full-scale administration.

    Administering the Survey

    The survey will be distributed via email to hospital administration contacts obtained from the AHA directory. An initial invitation email will be sent, followed by two reminder emails at one-week intervals. To enhance response rates, a follow-up personalized email with a direct link to the survey will be sent to non-respondents three weeks after the initial distribution. A pre-addressed return envelope will be provided for those who prefer paper responses.

    4. Population and Sample Characteristics

    CharacteristicDescription
    PopulationAcute care hospitals in the United States (~6,090)
    Sample Size166 hospitals (adjusted for 20% non-response)
    Sampling DesignStratified multistage cluster sampling
    StrataGeographic regions, hospital size, ownership type
    Sampling MethodSystematic probability sampling within clusters
    Stratification VariablesSize (small, medium, large), Location (urban, rural), Ownership (public, private nonprofit, private for-profit)

    5. Variables in the Study

    Table 1: Variables, Research Questions/Hypotheses, and Survey Items

    VariableResearch Question/HypothesisSurvey Items
    EHR ImplementationDescriptive Q1: Level of EHR implementation among hospitals in the U.S.Inferential Q1: Relationship with patient care quality.Inferential Q2: Comparison of patient care quality across EHR implementation levels."To what extent has your hospital implemented an Electronic Health Record (EHR) system?" (Fully, Partially, Not implemented)
    Patient Care QualityDescriptive Q2: Current patient care quality metrics.Inferential Q1, Q2, Q3, Q4: Various relationships and comparisons with EHR implementation.- "In the past year, how often has your hospital experienced a patient safety incident?"- "Overall patient satisfaction scores."- "Adherence to clinical guidelines."
    Types of EHR SystemsDescriptive Q3: Most commonly used EHR systems in U.S. hospitals."Which Electronic Health Record (EHR) system does your hospital currently use?" (List of common EHR platforms)
    Hospital CharacteristicsDescriptive Q4: Characteristics of hospitals in terms of size, location, and type.Inferential Q3: Control variables in relationship between EHR and patient care quality.- "Number of hospital beds."- "Location: Urban or Rural?"- "Ownership Type: Public, Private Nonprofit, Private For-profit"

    6. Data Analysis

    Statistical Software

    Data will be analyzed using IBM SPSS Statistics 24 for Windows and Mac. SPSS is chosen for its robust statistical capabilities, user-friendly interface, and compatibility with the data collection platform.

    Analysis Steps

    Step 1: Descriptive Analysis

    • Respondent Characteristics: Calculate frequencies and percentages for hospital size, location, ownership type, and EHR implementation levels.
    • Patient Care Quality Metrics: Compute means, standard deviations, and ranges for patient safety incidents, adherence to clinical guidelines, and patient satisfaction scores.
    • Missing Data: Identify the extent of missing data and apply appropriate strategies (e.g., multiple imputation) if necessary.

    Step 2: Assessing Response Bias

    • Wave Analysis: Examine response patterns across different survey distribution waves to detect any trends indicating response bias.
    • Respondent vs. Nonrespondent Analysis: Compare early and late respondents on key variables to infer potential differences with nonrespondents.

    Step 3: Reliability Checks

    • Internal Consistency: Calculate Cronbach’s alpha for multi-item scales (e.g., patient safety incidents, patient satisfaction) to ensure reliability.
    • Scale Construction: Reverse-score items if necessary and compute total scale scores for each construct.

    Step 4: Inferential Statistics

    • Regression Analysis: Conduct multiple regression to assess the relationship between EHR implementation level (independent variable) and patient care quality (dependent variable), controlling for hospital size and location.
    • ANOVA: Perform Analysis of Variance to compare patient care quality metrics across different levels of EHR implementation (fully implemented, partially implemented, not implemented).
    • ANCOVA: Use Analysis of Covariance to further examine differences in patient satisfaction scores between hospitals using advanced EHR functionalities versus basic or no EHR systems, controlling for hospital characteristics.

    Step 5: Reporting Results

    • Statistical Significance: Report p-values to determine the significance of findings.
    • Effect Sizes: Provide measures such as Cohen’s d for ANOVA and standardized coefficients (β) for regression analyses to indicate practical significance.
    • Confidence Intervals: Present 95% confidence intervals for key estimates to convey the precision of the results.

    Step 6: Data Visualization

    • Tables and Figures: Create tables summarizing descriptive statistics and inferential test results. Use bar charts and scatter plots to visualize relationships between EHR implementation and patient care quality metrics.

    7. Interpreting Results and Writing a Discussion Section

    Upon completing the data analysis, the results will be interpreted in relation to the research questions and hypotheses. The discussion will encompass the following elements:

    1. Summary of Findings: Highlight whether the level of EHR implementation is significantly associated with improvements in patient care quality metrics.
    2. Comparison with Previous Research: Situate the findings within the existing literature, discussing consistencies or discrepancies.
    3. Implications for Practice: Discuss how the results inform hospital administrators and policymakers about the benefits or challenges of EHR adoption.
    4. Theoretical Contributions: Elaborate on how the findings contribute to theories related to health informatics and patient care quality.
    5. Limitations: Acknowledge potential limitations, such as self-report bias or unmeasured confounding variables.
    6. Future Research Directions: Suggest areas for further investigation, including longitudinal studies or qualitative research to explore underlying mechanisms.

    8. Checklist Review (Table 8.1)

    After drafting the method section, it is essential to review the following checklist to ensure all components have been adequately addressed:

    ComponentAddressed?Notes
    Survey DesignYesPurpose, rationale, cross-sectional, online survey with justification provided.
    Population and SampleYesDefined population, sampling design, sample size, stratification, power analysis.
    InstrumentationYesInstruments named, validity and reliability discussed, sample items included.
    Pilot TestingYesPilot study plans described with intended refinements based on feedback.
    Administering the SurveyYesDetailed administration plan with phases and follow-ups outlined.
    Variables in the StudyYesTable correlating variables with research questions and survey items.
    Data Analysis PlanYesDetailed steps, statistical methods, software specified.
    Interpretation StrategyYesSteps for interpreting results and drafting discussion outlined.

    Note: Since Table 8.1 was not provided, the checklist above is based on the essential components discussed in the lecture notes.

    Summary

    This method section outlines a comprehensive survey study plan aimed at investigating the relationship between EHR implementation and patient care quality in U.S. hospitals. By employing a cross-sectional survey design with a stratified multistage cluster sampling approach, the study ensures representativeness and generalizability of findings. Utilizing validated instruments enhances the reliability and validity of the data collected. The detailed data analysis plan facilitates robust examination of both descriptive and inferential research questions, ultimately contributing valuable insights to the field of healthcare informatics and quality improvement.