Tenho seguinte código c++ char Filename[0x104]; char Drive[3]; char Dir[0x100]; char…
- User
Tenho seguinte código c++
char Filename[0x104]; char Drive[3]; char Dir[0x100]; char Destination[0x100]; char Source[0x14]; char FileName[0x104]; char* Block = nullptr;
// Get the full path of the module GetModuleFileNameA(NULL, Filename, 0x104); // Debug: Show the full module path MessageBoxA(NULL, Filename, "Debug - Filename", MB_OK);
// Split the path into its components _splitpath_s(Filename, Drive, 3, Dir, 0x100, Destination, 0x100, Source, 0x14); // Debug: Show the path components MessageBoxA(NULL, Drive, "Debug - Drive", MB_OK); MessageBoxA(NULL, Dir, "Debug - Dir", MB_OK); MessageBoxA(NULL, Destination, "Debug - Destination", MB_OK); MessageBoxA(NULL, Source, "Debug - Source", MB_OK);
// Append the extension to the filename strcat_s(Destination, 0x100, Source); // Debug: Show the concatenated filename MessageBoxA(NULL, Destination, "Debug - Concatenated Filename", MB_OK);
// Allocate memory char* dword_100198F0 = (char*)malloc(0x104); if (!dword_100198F0) { MessageBoxA(NULL, "Memory allocation failed for dword_100198F0", "Error", MB_OK); return FALSE; }
// Get the module file name again GetModuleFileNameA(hModule, FileName, 0x104); // Debug: Show the module filename MessageBoxA(NULL, FileName, "Debug - Module Filename", MB_OK);
// Store the module filename into allocated memory strcpy_s(dword_100198F0, 0x104, FileName);
// Open the module file FILE* fp = fopen(FileName, "rb"); if (!fp) { // Display error message and exit if file cannot be opened MessageBoxA(NULL, "Couldn't locate the client executable.", "GRF Encryption - File not found", MB_OK); exit(1); }
// Determine the file size fseek(fp, 0, SEEK_END); long fileSize = ftell(fp); // Debug: Show the file size { char msg[256]; sprintf_s(msg, sizeof(msg), "File size: %ld bytes", fileSize); MessageBoxA(NULL, msg, "Debug - File Size", MB_OK); } rewind(fp);
// Allocate memory for the file content Block = (char*)malloc(fileSize); if (!Block) { MessageBoxA(NULL, "Memory allocation failed for Block", "Error", MB_OK); fclose(fp); return FALSE; }
// Read the entire file into Block size_t bytesRead = fread(Block, 1, fileSize, fp); fclose(fp); // Debug: Show the number of bytes read { char msg[256]; sprintf_s(msg, sizeof(msg), "Bytes read: %zu bytes", bytesRead); MessageBoxA(NULL, msg, "Debug - Bytes Read", MB_OK); }
// Prepare to search for the pattern "NUMBER" const char pattern[] = "NUMBER"; long matchPos = -1; for (long i = 0; i <= fileSize - (long)(sizeof(pattern) - 1); i++) { if (memcmp(Block + i, pattern, sizeof(pattern) - 1) == 0) { matchPos = i; break; } }
// Debug: Show if the pattern was found if (matchPos == -1) { MessageBoxA(NULL, "Pattern 'NUMBER' not found in Block", "Debug - Pattern Search", MB_OK); } else { char msg[256]; sprintf_s(msg, sizeof(msg), "Pattern 'NUMBER' found at position: %ld", matchPos); MessageBoxA(NULL, msg, "Debug - Pattern Found", MB_OK); }
if (matchPos == -1) { free(Block); break; }
// Copy data starting from matchPos + 14 into var_334 char var_334[0x108]; memcpy(var_334, Block + matchPos + 14, 0x108); // Debug: Show that data was copied into var_334 MessageBoxA(NULL, "Copied data into var_334", "Debug", MB_OK);
// Copy dword_100198F0 into Src char Src[0x104]; memcpy(Src, dword_100198F0, 0x104); // Debug: Show that data was copied into Src MessageBoxA(NULL, "Copied data into Src", "Debug", MB_OK);
// Copy data from var_334 into var_12C char var_12C[0x104]; memcpy(var_12C, var_334 + 0x104, 0x104); // Adjusted offset based on var_334 size // Debug: Show that data was copied into var_12C MessageBoxA(NULL, "Copied data into var_12C", "Debug", MB_OK);
// Invert each byte in var_12C for (int i = 0; i < 0x104; i++) { var_12C[i] = ~var_12C[i]; } // Debug: Show that bytes in var_12C were inverted MessageBoxA(NULL, "Inverted bytes in var_12C", "Debug", MB_OK);
// Free the Block memory free(Block); // Debug: Indicate that Block memory was freed MessageBoxA(NULL, "Freed Block memory", "Debug", MB_OK);
// Open the file specified by var_12C MessageBoxA(NULL, var_12C, "GRF Encryption - File not found", MB_OK); fp = fopen(var_12C, "rb"); if (!fp) { // Display error message and exit if file cannot be opened MessageBoxA(NULL, "Couldn't locate the client executable.", "GRF Encryption - File not found", MB_OK); exit(1); } fclose(fp); // Debug: Indicate that the file specified by var_12C exists MessageBoxA(NULL, "Verified existence of client executable", "Debug", MB_OK);
pela logica o que seria a var_12C
- Assistant
O código C++ fornecido parece estar manipulando o próprio executável do programa para procurar um padrão específico "NUMBER", ler seu conteúdo em memória, modificar estes dados e, eventualmente, tentar abrir outro arquivo com base nos dados modificados. Vamos analisar a função e a lógica para entender o que representa a variável
var_12C.-
Leitura e Processamento do Arquivo Executável:
- O programa obtém o nome completo do módulo executável atual (
GetModuleFileNameA). - Abre esse arquivo no modo de leitura binária (
fopen(FileName, "rb")). - Lê o conteúdo do arquivo todo na memória alocada dinamicamente referenciada por
Block.
- O programa obtém o nome completo do módulo executável atual (
-
Busca por Padrão:
- O código procura pela string "NUMBER" dentro do conteúdo do arquivo carregado na memória (
Block).
- O código procura pela string "NUMBER" dentro do conteúdo do arquivo carregado na memória (
-
Manipulação de Dados:
- Se o padrão "NUMBER" é encontrado, copia-se uma sequência de dados iniciando 14 bytes após a localização do padrão para o buffer
var_334. - A partir do
var_334, são copiados 0x104 bytes após 0x104 bytes iniciais (aparentemente, está tentando copiar a partir de um deslocamento errado, dada a lógica apresentada, pois deveria começar talvez dos 0 a 0x104) paravar_12C.
- Se o padrão "NUMBER" é encontrado, copia-se uma sequência de dados iniciando 14 bytes após a localização do padrão para o buffer
-
Transformação dos Dados:
- Cada byte de
var_12Cé invertido bit a bit (~var_12C[i]).
- Cada byte de
-
Interpretação do Contexto:
- Após a inversão, o programa tenta abrir um arquivo utilizando o conteúdo de
var_12Ccomo nome do arquivo (fopen(var_12C, "rb")).
- Após a inversão, o programa tenta abrir um arquivo utilizando o conteúdo de
Então,
var_12Cparece ter a função de armazenar um nome de arquivo codificado ou transformado com base em algum tipo de lógica interna do executável original. Após a cópia, os bytes são invertidos, o que sugere algum tipo de ofuscação ou criptografia simples para "esconder" o nome do arquivo real.Essencialmente,
var_12Cé utilizado como um nome de arquivo supostamente recuperado e transformado do conteúdo do próprio executável. Se o nome resultante do arquivo existir, ele é fechado imediatamente; caso contrário, uma mensagem de erro é mostrada e o programa termina. -
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.