Skip to content
TheChatArchiveThe Chat Archive
o1-mini-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

Two MCR output instructions are to be programmed to control a section of a program.…

  1. User

    Two MCR output instructions are to be programmed to control a section of a program. Identify the programming procedures that should be followed in this case. (Check all that apply.)

    Check All That Apply

    An MCR rung with conditional inputs should be placed at the beginning of the fenced zone to be controlled.

    An MCR rung with conditional inputs should be placed at the beginning of the fenced zone to be controlled.

    An MCR rung with no conditional inputs should be placed at the beginning of the fenced zone to be controlled.

    An MCR rung with no conditional inputs should be placed at the beginning of the fenced zone to be controlled.

    An MCR rung with no conditional inputs should be placed at the end of the fenced zone to be controlled.

    An MCR rung with no conditional inputs should be placed at the end of the fenced zone to be controlled.

    An MCR rung with conditional inputs should be placed at the end of the fenced zone to be controlled.

  2. Assistant

    When programming Master Control Relay (MCR) instructions to control a section (fenced zone) of a program in ladder logic, it's essential to follow specific procedures to ensure the zone operates correctly. The correct procedures include:

    1. Placing an MCR Rung with Conditional Inputs at the Beginning:

      • Purpose: This MCR rung acts as the "start" of the fenced zone. It contains the conditions that must be met for the entire zone to be active.
      • Implementation: Position this rung at the very beginning of the fenced zone. The conditional inputs determine when the fenced zone should be enabled.
    2. Placing an MCR Rung with No Conditional Inputs at the End:

      • Purpose: This MCR rung serves as the "end" of the fenced zone. It doesn't have any conditions because its primary role is to mark the termination of the zone.
      • Implementation: Position this rung at the very end of the fenced zone to signify the closure of the control area.

    Therefore, the correct procedures to follow are:

    • An MCR rung with conditional inputs should be placed at the beginning of the fenced zone to be controlled.
    • An MCR rung with no conditional inputs should be placed at the end of the fenced zone to be controlled.

    These steps ensure that the fenced zone is activated only when the specified conditions are met and that the zone operates as a cohesive unit from start to finish.

    Selected Options:

    • An MCR rung with conditional inputs should be placed at the beginning of the fenced zone to be controlled.
    • An MCR rung with no conditional inputs should be placed at the end of the fenced zone to be controlled.