Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

How get libusb_device if I have pid and vid?

  1. User

    How get libusb_device if I have pid and vid?

  2. Assistant

    To obtain a libusb_device pointer using known Vendor ID (VID) and Product ID (PID), you need to iterate through the list of connected USB devices, retrieve each device's descriptor, and compare the VID and PID with the ones you're searching for.

    Here's a step-by-step guide and a code example on how to achieve this:

    1. Initialize libusb: Before any operations, ensure that libusb is properly initialized.

    2. Get the Device List: Use libusb_get_device_list() to retrieve the list of all connected USB devices.

    3. Iterate Through the Device List: Loop through each device in the list to examine its descriptors.

    4. Retrieve Device Descriptor: For each device, use libusb_get_device_descriptor() to get the libusb_device_descriptor, which contains the VID and PID.

    5. Compare VID and PID: Check if the idVendor and idProduct match the VID and PID you're looking for.

    6. Handle the Found Device:

      • If a match is found, you can:
        • Increase the reference count of the device using libusb_ref_device() to ensure it's not deallocated when freeing the device list.
        • Use the device as needed.
      • Remember to free the device list after you're done using libusb_free_device_list().
    7. Close libusb: After all operations, close the libusb session if it's no longer needed.

    Here's an example function demonstrating this process:

    #include <libusb-1.0/libusb.h>
    
    libusb_device* get_device_by_vid_pid(uint16_t vid, uint16_t pid) {
        libusb_device **devs;
        libusb_device *found = NULL;
        ssize_t cnt, i;
        int r;
        
        // Initialize libusb
        r = libusb_init(NULL);
        if (r < 0) {
            // Initialization failed
            return NULL;
        }
    
        // Get the list of devices
        cnt = libusb_get_device_list(NULL, &devs);
        if (cnt < 0) {
            // Error in getting device list
            libusb_exit(NULL);
            return NULL;
        }
    
        // Iterate over each device
        for (i = 0; i < cnt; i++) {
            libusb_device *device = devs[i];
            struct libusb_device_descriptor desc;
    
            // Get the device descriptor
            r = libusb_get_device_descriptor(device, &desc);
            if (r < 0) {
                // Failed to get descriptor, skip this device
                continue;
            }
    
            // Compare VID and PID
            if (desc.idVendor == vid && desc.idProduct == pid) {
                // Found the device; increase the reference count
                found = libusb_ref_device(device);
                break;
            }
        }
    
        // Free the device list, unref devices not selected
        libusb_free_device_list(devs, 1);
    
        // Don't forget to close libusb if you're done with all operations
        // libusb_exit(NULL);
    
        return found; // Return the found device or NULL if not found
    }
    

    Usage Example:

    int main() {
        uint16_t vid = 0x1234; // Replace with your device's VID
        uint16_t pid = 0x5678; // Replace with your device's PID
    
        libusb_device *device = get_device_by_vid_pid(vid, pid);
        if (device) {
            // Device found, proceed with operations
            // ...
    
            // When done, unreference the device
            libusb_unref_device(device);
        } else {
            // Device not found
        }
    
        // Close libusb session
        libusb_exit(NULL);
    
        return 0;
    }
    

    Notes:

    • Reference Counting: When you obtain a libusb_device from the device list and plan to use it beyond the scope of the list (after libusb_free_device_list() is called), you need to increase its reference count using libusb_ref_device(). This prevents the device from being deallocated when the list is freed.

    • Error Handling: Always check the return values of libusb functions for errors, especially when dealing with device I/O.

    • Thread Safety: If your application is multithreaded, ensure thread safety as libusb functions are not all guaranteed to be thread-safe.

    • Clean Up: Always release resources by unreferencing devices (libusb_unref_device()) and exiting libusb (libusb_exit()) when they're no longer needed.

    By following this method, you can reliably obtain a libusb_device pointer using the VID and PID of your USB device.