hey assistent, so I have this figure hPatch(end+1) = patch( ... RectangleX,... % X data…
- User
hey assistent, so I have this figure hPatch(end+1) = patch( ... RectangleX,... % X data RectangleY,... % Y data 'g',... % color 'EdgeColor', 'g',... % color of the outer line 'parent', hAxes,... 'Tag','gabPolygone',... 'FaceAlpha', .1); % Transperancy of the polygone where Rectangle X and Y are known, I need to split this figure so that half of it is collred in a way and the other in other way
- Assistant
To split the patch into two different colors, you can create two separate patches that cover different portions of the same rectangle using the given
RectangleXandRectangleYdata. Assume that the rectangle is aligned with the x-axis, and you want to split it vertically (i.e., along the x-axis) into two halves. You can do this by dividing theRectangleXarray into two parts and creating two separate patches with different colors:Here’s how you can modify your code to achieve this:
% Original rectangle vertex coordinates RectangleX = [x1, x2, x2, x1]; % Example X coordinates RectangleY = [y1, y1, y2, y2]; % Example Y coordinates % Find the midpoint for splitting midX = (RectangleX(2) + RectangleX(1)) / 2; % Define X coordinates for the left half LeftHalfX = [RectangleX(1), midX, midX, RectangleX(1)]; % Define X coordinates for the right half RightHalfX = [midX, RectangleX(2), RectangleX(2), midX]; % Y coordinates remain the same for both halves LeftHalfY = RectangleY; RightHalfY = RectangleY; % Create the first patch for the left half hPatch(end+1) = patch( ... LeftHalfX, ... LeftHalfY, ... 'g', ... % color for left half 'EdgeColor', 'g', ... % color of the outer line 'Parent', hAxes, ... 'Tag', 'gabPolygone', ... 'FaceAlpha', .1); % Transparency of the polygon % Create the second patch for the right half hPatch(end+1) = patch( ... RightHalfX, ... RightHalfY, ... 'b', ... % color for right half (change to desired color) 'EdgeColor', 'b', ... % color of the outer line 'Parent', hAxes, ... 'Tag', 'gabPolygone', ... 'FaceAlpha', .1); % Transparency of the polygonIn this code:
LeftHalfXandRightHalfXare defined to create two separate sets of x-coordinates for each half of the rectangle.- The
patchfunction is called twice: once for each half. - The first patch (left half) is colored green (
'g'), as per your original requirement. - The second patch (right half) is colored blue (
'b') as an example. You can change this color to whatever you wish.
Ensure your plotting happens within a defined axes (
hAxes), which you should have set up before this code. - User
right now this is X and Y RectangleX = [-0.12 0.12 0.12 -0.12]; RectangleY = [-0.1 -0.1 0.1 0.1]; This is my task: Ce gabarit comporte 2 zones, 1 bleu qui est négative et donc logique ( dégradation en coasting ) et 1 jaune qui pourrait corresponde à une incertitude de mesure ( on la laisse puisqu’elle fait partie du bench mais différenciée en couleur )
La zone bleu est défini avec un écart de : -0,15 s =< écart tG005 =< 0 s & -0,15 s =< écart t80%Gmax =< 0 s
La zone jaune est défini avec un écart de : -0,15 s =< écart tG005 =< 0 s & 0 s =< écart t80%Gmax =< 0.04 s
- Assistant
To follow your task requirements, you will need to specify two distinct rectangles using the
patchfunction to visualize two zones: a blue zone for negative deviation indicating degradation in coasting, and a yellow zone for potential measurement uncertainty.Given your description, we need to create two zones:
- Blue Zone: Defined by (-0.15 \text{s} \leq \text{écart } tG005 \leq 0 \text{s}) and (-0.15 \text{s} \leq \text{écart } t80%G_{\text{max}} \leq 0 \text{s}).
- Yellow Zone: Defined by (-0.15 \text{s} \leq \text{écart } tG005 \leq 0 \text{s}) and (0 \text{s} \leq \text{écart } t80%G_{\text{max}} \leq 0.04 \text{s}).
You can adjust the
RectangleXandRectangleYvalues accordingly to cover these ranges, assuming these values correspond to your x (tG005) and y (t80%Gmax) axes respectively.Here's how you could code it in MATLAB:
% Vertices of the blue zone (negative deviation) BlueZoneX = [-0.15, 0, 0, -0.15]; BlueZoneY = [-0.15, -0.15, 0, 0]; % Vertices of the yellow zone (measurement uncertainty) YellowZoneX = [-0.15, 0, 0, -0.15]; YellowZoneY = [0, 0, 0.04, 0.04]; % Create the blue patch (negative deviation zone) hPatch(end+1) = patch( ... BlueZoneX, ... BlueZoneY, ... 'b', ... % blue color 'EdgeColor', 'b', ... % color of the outer line 'Parent', hAxes, ... 'Tag', 'blueZone', ... 'FaceAlpha', .1); % Transparency of the polygon % Create the yellow patch (measurement uncertainty zone) hPatch(end+1) = patch( ... YellowZoneX, ... YellowZoneY, ... 'y', ... % yellow color 'EdgeColor', 'y', ... % color of the outer line 'Parent', hAxes, ... 'Tag', 'yellowZone', ... 'FaceAlpha', .1); % Transparency of the polygonThis code will generate two overlapping rectangles on your plot, where:
- The blue rectangle represents the negative deviations you mentioned.
- The yellow rectangle overlays part of that blue rectangle for the measurement uncertainty range you described.
Make sure to adjust these coordinates if the axes in your specific context interpret these differently. The above assumes each axis unit directly maps to your described scales. Adjust the
RectangleXandRectangleYranges to match your actual plot axes as needed. - User
this was the already defined hpatch hPatch = []; hPatch(end+1) = patch( ... RectangleX,... % X data RectangleY,... % Y data 'g',... % color 'EdgeColor', 'g',... % color of the outer line 'parent', hAxes,... 'Tag','gabPolygone',... 'FaceAlpha', .1); % Transperancy of the polygone
- Assistant
To modify this to display the two zones you described (blue for negative deviation and yellow for measurement uncertainty), you'll need to adjust the definitions for the
patchobjects so that each represents one of the zones with the specific conditions you mentioned.Currently, your setup initializes
hPatchand adds a single green rectangle. You will adjust this to create two separate rectangles in blue and yellow as discussed earlier.Here's how you can modify your existing code to implement these changes:
% Clear previous patches hPatch = []; % Define vertices for the blue zone (negative deviation) BlueZoneX = [-0.15, 0, 0, -0.15]; % X coordinates BlueZoneY = [-0.15, -0.15, 0, 0]; % Y coordinates % Define vertices for the yellow zone (measurement uncertainty) YellowZoneX = [-0.15, 0, 0, -0.15]; % X coordinates YellowZoneY = [0, 0, 0.04, 0.04]; % Y coordinates % Create the blue patch (negative deviation zone) hPatch(end+1) = patch( ... BlueZoneX, ... BlueZoneY, ... 'b', ... % Set color to blue 'EdgeColor', 'b', ... % Edge color blue 'Parent', hAxes, ... 'Tag', 'blueZone', ... 'FaceAlpha', .1); % Adjust transparency as needed % Create the yellow patch (measurement uncertainty zone) hPatch(end+1) = patch( ... YellowZoneX, ... YellowZoneY, ... 'y', ... % Set color to yellow 'EdgeColor', 'y', ... % Edge color yellow 'Parent', hAxes, ... 'Tag', 'yellowZone', ... 'FaceAlpha', .1); % Adjust transparency as neededExplanation:
- Blue Zone: Defined from (-0.15) to (0) on both axes (
écart tG005andécart t80%Gmax), filled in blue (('b')). - Yellow Zone: Defined from (-0.15) to (0) on
écart tG005and from (0) to (0.04) onécart t80%Gmax, filled in yellow (('y')).
Ensure that
hAxesis correctly defined in your script, as this is expected to refer to the axes on which the patches are drawn.These patches will visualize the two zones described, overlapping at the boundary where they meet. Adjust
FaceAlphaas needed for the correct visual effect on your plot. - Blue Zone: Defined from (-0.15) to (0) on both axes (