Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

Question 2: Consider the analog signal x<sub>a</sub>(t) = 3 cos(2000πt) + 5 sin(6000πt)…

  1. User

    Question 2: Consider the analog signal

    xa(t) = 3 cos(2000πt) + 5 sin(6000πt) + 10 cos(12000πt)

    (a) What is the Nyquist rate for this signal?

    (b) Assume now that we sample this signal using a sampling rate Fs = 5000 samples/sec. What is the discrete-time signal obtained after sampling?

    (c) What is the analog signal ya(t) that we can reconstruct from the samples, if we use ideal interpolation?

  2. Assistant

    Answer:


    (a) What is the Nyquist rate for this signal?

    To find the Nyquist rate, we need to identify the highest frequency component in the signal ( x_a(t) ). The signal is:

    [ x_a(t) = 3\cos(2000\pi t) + 5\sin(6000\pi t) + 10\cos(12000\pi t) ]

    First, we calculate the frequencies of each term:

    1. First term: ( 3\cos(2000\pi t) )
      Angular frequency ( \omega_1 = 2000\pi ) rad/s
      Frequency ( f_1 = \frac{\omega_1}{2\pi} = \frac{2000\pi}{2\pi} = 1000 ) Hz

    2. Second term: ( 5\sin(6000\pi t) )
      Angular frequency ( \omega_2 = 6000\pi ) rad/s
      Frequency ( f_2 = \frac{\omega_2}{2\pi} = \frac{6000\pi}{2\pi} = 3000 ) Hz

    3. Third term: ( 10\cos(12000\pi t) )
      Angular frequency ( \omega_3 = 12000\pi ) rad/s
      Frequency ( f_3 = \frac{\omega_3}{2\pi} = \frac{12000\pi}{2\pi} = 6000 ) Hz

    The highest frequency component is 6000 Hz. The Nyquist rate is twice the highest frequency:

    [ \text{Nyquist rate} = 2 \times 6000 \text{ Hz} = 12,000 \text{ Hz} ]

    Answer to (a): The Nyquist rate for the signal is 12,000 Hz.


    (b) What is the discrete-time signal obtained after sampling at ( F_s = 5000 ) samples/sec?

    The sampling period is ( T_s = \frac{1}{F_s} = \frac{1}{5000} ) sec. The sampled signal is ( x[n] = x_a(n T_s) ).

    Substitute ( t = n T_s = \frac{n}{5000} ) into ( x_a(t) ):

    [ \begin{align*} x[n] &= 3\cos\left(2000\pi \cdot \frac{n}{5000}\right) + 5\sin\left(6000\pi \cdot \frac{n}{5000}\right) + 10\cos\left(12000\pi \cdot \frac{n}{5000}\right) \ &= 3\cos\left(\frac{2\pi n}{5}\right) + 5\sin\left(\frac{6\pi n}{5}\right) + 10\cos\left(\frac{12\pi n}{5}\right) \end{align*} ]

    Simplify each term:

    1. First term: ( \cos\left(\frac{2\pi n}{5}\right) )

    2. Second term: ( \sin\left(\frac{6\pi n}{5}\right) )
      Since ( \sin(\theta) = \cos\left(\theta - \frac{\pi}{2}\right) ), it can be left as is for now.

    3. Third term: ( \cos\left(\frac{12\pi n}{5}\right) )

    Now, consider aliasing due to sampling. The discrete-time angular frequencies ( \omega ) are related to analog frequencies by:

    [ \omega = 2\pi \left( \frac{f}{F_s} \right) ]

    Calculate ( \omega ) for each frequency:

    1. First term:
      ( f_1 = 1000 ) Hz
      ( \omega_1 = 2\pi \left( \frac{1000}{5000} \right) = 0.4\pi )

    2. Second term:
      ( f_2 = 3000 ) Hz
      ( \omega_2 = 2\pi \left( \frac{3000}{5000} \right) = 1.2\pi )
      Aliasing occurs since ( \omega_2 > \pi ):
      ( \omega_2' = \omega_2 - 2\pi = -0.8\pi )

    3. Third term:
      ( f_3 = 6000 ) Hz
      ( \omega_3 = 2\pi \left( \frac{6000}{5000} \right) = 2.4\pi )
      Aliasing occurs again:
      ( \omega_3' = \omega_3 - 2\pi = 0.4\pi

    [ x[n] = 3\cos(0.4\pi n) + 5\sin(-0.8\pi n) + 10\cos(0.4\pi n) ]

    Combine like terms and simplify:

    [ \begin{align*} x[n] &= (3 + 10)\cos(0.4\pi n) - 5\sin(0.8\pi n) \ &= 13\cos(0.4\pi n) - 5\sin(0.8\pi n) \end{align*} ]

    Answer to (b): The discrete-time signal is ( x[n] = 13\cos(0.4\pi n) - 5\sin(0.8\pi n) ).


    (c) What is the analog signal ( y_a(t) ) that we can reconstruct from the samples, if we use ideal interpolation?

    Ideal interpolation reconstructs the signal components within the bandwidth ( [-\frac{F_s}{2}, \frac{F_s}{2}] ). The frequencies present in ( x[n] ) correspond to analog frequencies:

    1. First component at ( \omega = 0.4\pi ):

    [ f = \frac{\omega F_s}{2\pi} = \frac{0.4\pi \times 5000}{2\pi} = 1000\text{ Hz} ]

    1. Second component at ( \omega = -0.8\pi ):

    [ f = \frac{(-0.8\pi) \times 5000}{2\pi} = -2000\text{ Hz} ]

    Since frequency is magnitude, we consider ( f = 2000\text{ Hz} ).

    Therefore, the reconstructed analog signal is:

    [ \begin{align*} y_a(t) &= 13\cos(2\pi (1000)t) - 5\sin(2\pi (2000)t) \ &= 13\cos(2000\pi t) - 5\sin(4000\pi t) \end{align*} ]

    Answer to (c): The reconstructed analog signal is ( y_a(t) = 13\cos(2000\pi t) - 5\sin(4000\pi t) ).


    Note: Due to under-sampling (sampling below the Nyquist rate), the reconstructed signal ( y_a(t) ) differs from the original ( x_a(t) ) because higher frequency components have aliased into lower frequencies.