what subchapters in College Physics 2e openstax do i need to read to cover this content?…
- User
what subchapters in College Physics 2e openstax do i need to read to cover this content? Thermal Expansion and Kinetic Theory
Copyright © 2009 Pearson Education, Inc.
Thermal Expansion Linear expansion occurs when an object is heated.
Here, α is the coefficient of linear expansion. Copyright © 2009 Pearson Education, Inc. Thermal Expansion Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Bridge expansion. The steel bed of a suspension bridge is 200 m long at 20°C. If the extremes of temperature to which it might be exposed are -30°C to +40°C, how much will it contract and expand? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Conceptual Example: Do holes expand or contract? If you heat a thin, circular ring in the oven, does the ring’s hole get larger or smaller? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Ring on a rod. An iron ring is to fit snugly on a cylindrical iron rod. At 20°C, the diameter of the rod is 6.445 cm and the inside diameter of the ring is 6.420 cm. To slip over the rod, the ring must be slightly larger than the rod diameter by about 0.008 cm. To what temperature must the ring be brought if its hole is to be large enough so it will slip over the rod? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Conceptual Example: Opening a tight jar lid. When the lid of a glass jar is tight, holding the lid under hot water for a short time will often make it easier to open. Why? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Volume expansion is similar, except that it is relevant for liquids and gases as well as solids:
Here, β is the coefficient of volume expansion. For uniform solids, β ≈ 3α. Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Gas tank in the Sun. The 70-liter (L) steel gas tank of a car is filled to the top with gasoline at 20°C. The car sits in the Sun and the tank reaches a temperature of 40°C (104°F). How much gasoline do you expect to overflow from the tank? Copyright © 2009 Pearson Education, Inc.
Thermal Expansion Water behaves differently from most other solids—its minimum volume occurs when its temperature is 4°C. As it cools further, it expands, as anyone who leaves a bottle in the freezer to cool and then forgets about it can testify. Copyright © 2009 Pearson Education, Inc.
Atomic Theory of Matter Atomic and molecular masses are measured in unified atomic mass units (u). This unit is defined so that the carbon-12 atom has a mass of exactly 12.0000 u. Expressed in kilograms: 1 u = 1.6605 x 10-27 kg. Brownian motion is the jittery motion of tiny flecks in water; these are the result of collisions with individual water molecules. Copyright © 2009 Pearson Education, Inc. Atomic Theory of Matter On a microscopic scale, the arrangements of molecules in solids (a), liquids (b), and gases © are quite different. Copyright © 2009 Pearson Education, Inc. Atomic Theory of Matter Example: Distance between atoms. The density of copper is 8.9 x 103 kg/m3, and each copper atom has a mass of 63 u. Estimate the average distance between the centers of neighboring copper atoms. Copyright © 2009 Pearson Education, Inc. Thermal Equilibrium and the Zeroth Law of Thermodynamics Two objects placed in thermal contact will eventually come to the same temperature. When they do, we say they are in thermal equilibrium. The zeroth law of thermodynamics says that if two objects are each in equilibrium with a third object, they are also in thermal equilibrium with each other. Copyright © 2009 Pearson Education, Inc.
The Ideal Gas Law and the Molecular Interpretation of TemperatureThe force exerted on the wall by
the collision of one molecule is
Then the force due to all molecules colliding with that wall is
Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature The averages of the squares of the speeds in all three directions are equal:
So the pressure is:
Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature Rewriting, so
The average translational kinetic energy of the molecules in an ideal gas is directly proportional to the temperature of the gas. Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature Example 18-1: Molecular kinetic energy. What is the average translational kinetic energy of molecules in an ideal gas at 37° C? Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature We can now calculate the average speed of molecules in a gas as a function of temperature:
Copyright © 2009 Pearson Education, Inc. Distribution of Molecular Speeds The molecules in a gas will not all have the same speed; their distribution of speeds is called the Maxwell distribution:
Copyright © 2009 Pearson Education, Inc.
Distribution of Molecular Speeds The Maxwell distribution depends only on the absolute temperature. This figure shows distributions for two different temperatures; at the higher temperature, the whole curve is shifted to the right.
Copyright © 2009 Pearson Education, Inc. To cover the content from Pearson Education, Inc. related to “Thermal Expansion and Kinetic Theory” in “College Physics 2e” by OpenStax, you should focus on the following chapters and subchapters:
- Chapter 13: Temperature, Kinetic Theory, and the Gas Laws
- This chapter provides a comprehensive overview of kinetic theory, the behavior of gases, and the molecular interpretation of temperature.
- Chapter 14: Heat and Heat Transfer Methods
- Covers specific topics related to heat transfer and thermal expansion in materials.
Within these chapters, pay particular attention to subtopics such as:
- Thermal Expansion: Look for discussions on linear and volume expansion, coefficients of expansion, and practical examples like metal rings, bridges, and gas tanks.
- Kinetic Theory of Gases: Concepts related to the behavior of gases at the molecular level, ideal gas law, molecular speeds, and the Maxwell distribution.
- Atomic Theory and Behavior at Different States: Understanding molecular layout in solids, liquids, and gases.
These sections explain how temperature affects molecular motion and the resulting thermal expansion or contraction of materials, directly corresponding to the examples stated, such as the behavior of bridges, jar lids, and gas tanks. what chapters in College Physics 2e openstax do i need to read to cover this content? Thermal Expansion and Kinetic Theory
Copyright © 2009 Pearson Education, Inc.
Thermal Expansion Linear expansion occurs when an object is heated.
Here, α is the coefficient of linear expansion. Copyright © 2009 Pearson Education, Inc. Thermal Expansion Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Bridge expansion. The steel bed of a suspension bridge is 200 m long at 20°C. If the extremes of temperature to which it might be exposed are -30°C to +40°C, how much will it contract and expand? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Conceptual Example: Do holes expand or contract? If you heat a thin, circular ring in the oven, does the ring’s hole get larger or smaller? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Ring on a rod. An iron ring is to fit snugly on a cylindrical iron rod. At 20°C, the diameter of the rod is 6.445 cm and the inside diameter of the ring is 6.420 cm. To slip over the rod, the ring must be slightly larger than the rod diameter by about 0.008 cm. To what temperature must the ring be brought if its hole is to be large enough so it will slip over the rod? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Conceptual Example: Opening a tight jar lid. When the lid of a glass jar is tight, holding the lid under hot water for a short time will often make it easier to open. Why? Copyright © 2009 Pearson Education, Inc. Thermal Expansion Volume expansion is similar, except that it is relevant for liquids and gases as well as solids:
Here, β is the coefficient of volume expansion. For uniform solids, β ≈ 3α. Copyright © 2009 Pearson Education, Inc. Thermal Expansion Example: Gas tank in the Sun. The 70-liter (L) steel gas tank of a car is filled to the top with gasoline at 20°C. The car sits in the Sun and the tank reaches a temperature of 40°C (104°F). How much gasoline do you expect to overflow from the tank? Copyright © 2009 Pearson Education, Inc.
Thermal Expansion Water behaves differently from most other solids—its minimum volume occurs when its temperature is 4°C. As it cools further, it expands, as anyone who leaves a bottle in the freezer to cool and then forgets about it can testify. Copyright © 2009 Pearson Education, Inc.
Atomic Theory of Matter Atomic and molecular masses are measured in unified atomic mass units (u). This unit is defined so that the carbon-12 atom has a mass of exactly 12.0000 u. Expressed in kilograms: 1 u = 1.6605 x 10-27 kg. Brownian motion is the jittery motion of tiny flecks in water; these are the result of collisions with individual water molecules. Copyright © 2009 Pearson Education, Inc. Atomic Theory of Matter On a microscopic scale, the arrangements of molecules in solids (a), liquids (b), and gases © are quite different. Copyright © 2009 Pearson Education, Inc. Atomic Theory of Matter Example: Distance between atoms. The density of copper is 8.9 x 103 kg/m3, and each copper atom has a mass of 63 u. Estimate the average distance between the centers of neighboring copper atoms. Copyright © 2009 Pearson Education, Inc. Thermal Equilibrium and the Zeroth Law of Thermodynamics Two objects placed in thermal contact will eventually come to the same temperature. When they do, we say they are in thermal equilibrium. The zeroth law of thermodynamics says that if two objects are each in equilibrium with a third object, they are also in thermal equilibrium with each other. Copyright © 2009 Pearson Education, Inc.
The Ideal Gas Law and the Molecular Interpretation of TemperatureThe force exerted on the wall by
the collision of one molecule is
Then the force due to all molecules colliding with that wall is
Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature The averages of the squares of the speeds in all three directions are equal:
So the pressure is:
Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature Rewriting, so
The average translational kinetic energy of the molecules in an ideal gas is directly proportional to the temperature of the gas. Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature Example 18-1: Molecular kinetic energy. What is the average translational kinetic energy of molecules in an ideal gas at 37° C? Copyright © 2009 Pearson Education, Inc. The Ideal Gas Law and the Molecular Interpretation of Temperature We can now calculate the average speed of molecules in a gas as a function of temperature:
Copyright © 2009 Pearson Education, Inc. Distribution of Molecular Speeds The molecules in a gas will not all have the same speed; their distribution of speeds is called the Maxwell distribution:
Copyright © 2009 Pearson Education, Inc.
Distribution of Molecular Speeds The Maxwell distribution depends only on the absolute temperature. This figure shows distributions for two different temperatures; at the higher temperature, the whole curve is shifted to the right.
Copyright © 2009 Pearson Education, Inc. Preface Chapter 1 Introduction: The Nature of Science and Physics Introduction to Science and the Realm of Physics, Physical Quantities, and Units 1.1 Physics: An Introduction 1.2 Physical Quantities and Units 1.3 Accuracy, Precision, and Significant Figures 1.4 Approximation Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 2 Kinematics Introduction to One-Dimensional Kinematics 2.1 Displacement 2.2 Vectors, Scalars, and Coordinate Systems 2.3 Time, Velocity, and Speed 2.4 Acceleration 2.5 Motion Equations for Constant Acceleration in One Dimension 2.6 Problem-Solving Basics for One-Dimensional Kinematics 2.7 Falling Objects 2.8 Graphical Analysis of One-Dimensional Motion Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 3 Two-Dimensional Kinematics Introduction to Two-Dimensional Kinematics 3.1 Kinematics in Two Dimensions: An Introduction 3.2 Vector Addition and Subtraction: Graphical Methods 3.3 Vector Addition and Subtraction: Analytical Methods 3.4 Projectile Motion 3.5 Addition of Velocities Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 4 Dynamics: Force and Newton's Laws of Motion Introduction to Dynamics: Newton’s Laws of Motion 4.1 Development of Force Concept 4.2 Newton’s First Law of Motion: Inertia 4.3 Newton’s Second Law of Motion: Concept of a System 4.4 Newton’s Third Law of Motion: Symmetry in Forces 4.5 Normal, Tension, and Other Examples of Forces 4.6 Problem-Solving Strategies 4.7 Further Applications of Newton’s Laws of Motion 4.8 Extended Topic: The Four Basic Forces—An Introduction Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 5 Further Applications of Newton's Laws: Friction, Drag, and Elasticity Introduction: Further Applications of Newton’s Laws 5.1 Friction 5.2 Drag Forces 5.3 Elasticity: Stress and Strain Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 6 Uniform Circular Motion and Gravitation Introduction to Uniform Circular Motion and Gravitation 6.1 Rotation Angle and Angular Velocity 6.2 Centripetal Acceleration 6.3 Centripetal Force 6.4 Fictitious Forces and Non-inertial Frames: The Coriolis Force 6.5 Newton’s Universal Law of Gravitation 6.6 Satellites and Kepler’s Laws: An Argument for Simplicity Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 7 Work, Energy, and Energy Resources Introduction to Work, Energy, and Energy Resources 7.1 Work: The Scientific Definition 7.2 Kinetic Energy and the Work-Energy Theorem 7.3 Gravitational Potential Energy 7.4 Conservative Forces and Potential Energy 7.5 Nonconservative Forces 7.6 Conservation of Energy 7.7 Power 7.8 Work, Energy, and Power in Humans 7.9 World Energy Use Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 8 Linear Momentum and Collisions Introduction to Linear Momentum and Collisions 8.1 Linear Momentum and Force 8.2 Impulse 8.3 Conservation of Momentum 8.4 Elastic Collisions in One Dimension 8.5 Inelastic Collisions in One Dimension 8.6 Collisions of Point Masses in Two Dimensions 8.7 Introduction to Rocket Propulsion Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 9 Statics and Torque Introduction to Statics and Torque 9.1 The First Condition for Equilibrium 9.2 The Second Condition for Equilibrium 9.3 Stability 9.4 Applications of Statics, Including Problem-Solving Strategies 9.5 Simple Machines 9.6 Forces and Torques in Muscles and Joints Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 10 Rotational Motion and Angular Momentum Introduction to Rotational Motion and Angular Momentum 10.1 Angular Acceleration 10.2 Kinematics of Rotational Motion 10.3 Dynamics of Rotational Motion: Rotational Inertia 10.4 Rotational Kinetic Energy: Work and Energy Revisited 10.5 Angular Momentum and Its Conservation 10.6 Collisions of Extended Bodies in Two Dimensions 10.7 Gyroscopic Effects: Vector Aspects of Angular Momentum Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 11 Fluid Statics Introduction to Fluid Statics 11.1 What Is a Fluid? 11.2 Density 11.3 Pressure 11.4 Variation of Pressure with Depth in a Fluid 11.5 Pascal’s Principle 11.6 Gauge Pressure, Absolute Pressure, and Pressure Measurement 11.7 Archimedes’ Principle 11.8 Cohesion and Adhesion in Liquids: Surface Tension and Capillary Action 11.9 Pressures in the Body Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 12 Fluid Dynamics and Its Biological and Medical Applications Introduction to Fluid Dynamics and Its Biological and Medical Applications 12.1 Flow Rate and Its Relation to Velocity 12.2 Bernoulli’s Equation 12.3 The Most General Applications of Bernoulli’s Equation 12.4 Viscosity and Laminar Flow; Poiseuille’s Law 12.5 The Onset of Turbulence 12.6 Motion of an Object in a Viscous Fluid 12.7 Molecular Transport Phenomena: Diffusion, Osmosis, and Related Processes Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 13 Temperature, Kinetic Theory, and the Gas Laws Introduction to Temperature, Kinetic Theory, and the Gas Laws 13.1 Temperature 13.2 Thermal Expansion of Solids and Liquids 13.3 The Ideal Gas Law 13.4 Kinetic Theory: Atomic and Molecular Explanation of Pressure and Temperature 13.5 Phase Changes 13.6 Humidity, Evaporation, and Boiling Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 14 Heat and Heat Transfer Methods Introduction to Heat and Heat Transfer Methods 14.1 Heat 14.2 Temperature Change and Heat Capacity 14.3 Phase Change and Latent Heat 14.4 Heat Transfer Methods 14.5 Conduction 14.6 Convection 14.7 Radiation Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 15 Thermodynamics Introduction to Thermodynamics 15.1 The First Law of Thermodynamics 15.2 The First Law of Thermodynamics and Some Simple Processes 15.3 Introduction to the Second Law of Thermodynamics: Heat Engines and Their Efficiency 15.4 Carnot’s Perfect Heat Engine: The Second Law of Thermodynamics Restated 15.5 Applications of Thermodynamics: Heat Pumps and Refrigerators 15.6 Entropy and the Second Law of Thermodynamics: Disorder and the Unavailability of Energy 15.7 Statistical Interpretation of Entropy and the Second Law of Thermodynamics: The Underlying Explanation Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 16 Oscillatory Motion and Waves Introduction to Oscillatory Motion and Waves 16.1 Hooke’s Law: Stress and Strain Revisited 16.2 Period and Frequency in Oscillations 16.3 Simple Harmonic Motion: A Special Periodic Motion 16.4 The Simple Pendulum 16.5 Energy and the Simple Harmonic Oscillator 16.6 Uniform Circular Motion and Simple Harmonic Motion 16.7 Damped Harmonic Motion 16.8 Forced Oscillations and Resonance 16.9 Waves 16.10 Superposition and Interference 16.11 Energy in Waves: Intensity Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 17 Physics of Hearing Introduction to the Physics of Hearing 17.1 Sound 17.2 Speed of Sound, Frequency, and Wavelength 17.3 Sound Intensity and Sound Level 17.4 Doppler Effect and Sonic Booms 17.5 Sound Interference and Resonance: Standing Waves in Air Columns 17.6 Hearing 17.7 Ultrasound Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 18 Electric Charge and Electric Field Introduction to Electric Charge and Electric Field 18.1 Static Electricity and Charge: Conservation of Charge 18.2 Conductors and Insulators 18.3 Coulomb’s Law 18.4 Electric Field: Concept of a Field Revisited 18.5 Electric Field Lines: Multiple Charges 18.6 Electric Forces in Biology 18.7 Conductors and Electric Fields in Static Equilibrium 18.8 Applications of Electrostatics Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 19 Electric Potential and Electric Field Introduction to Electric Potential and Electric Energy 19.1 Electric Potential Energy: Potential Difference 19.2 Electric Potential in a Uniform Electric Field 19.3 Electrical Potential Due to a Point Charge 19.4 Equipotential Lines 19.5 Capacitors and Dielectrics 19.6 Capacitors in Series and Parallel 19.7 Energy Stored in Capacitors Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 20 Electric Current, Resistance, and Ohm's Law Introduction to Electric Current, Resistance, and Ohm's Law 20.1 Current 20.2 Ohm’s Law: Resistance and Simple Circuits 20.3 Resistance and Resistivity 20.4 Electric Power and Energy 20.5 Alternating Current versus Direct Current 20.6 Electric Hazards and the Human Body 20.7 Nerve Conduction–Electrocardiograms Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 21 Circuits and DC Instruments Introduction to Circuits and DC Instruments 21.1 Resistors in Series and Parallel 21.2 Electromotive Force: Terminal Voltage 21.3 Kirchhoff’s Rules 21.4 DC Voltmeters and Ammeters 21.5 Null Measurements 21.6 DC Circuits Containing Resistors and Capacitors Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 22 Magnetism Introduction to Magnetism 22.1 Magnets 22.2 Ferromagnets and Electromagnets 22.3 Magnetic Fields and Magnetic Field Lines 22.4 Magnetic Field Strength: Force on a Moving Charge in a Magnetic Field 22.5 Force on a Moving Charge in a Magnetic Field: Examples and Applications 22.6 The Hall Effect 22.7 Magnetic Force on a Current-Carrying Conductor 22.8 Torque on a Current Loop: Motors and Meters 22.9 Magnetic Fields Produced by Currents: Ampere’s Law 22.10 Magnetic Force between Two Parallel Conductors 22.11 More Applications of Magnetism Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 23 Electromagnetic Induction, AC Circuits, and Electrical Technologies Introduction to Electromagnetic Induction, AC Circuits and Electrical Technologies 23.1 Induced Emf and Magnetic Flux 23.2 Faraday’s Law of Induction: Lenz’s Law 23.3 Motional Emf 23.4 Eddy Currents and Magnetic Damping 23.5 Electric Generators 23.6 Back Emf 23.7 Transformers 23.8 Electrical Safety: Systems and Devices 23.9 Inductance 23.10 RL Circuits 23.11 Reactance, Inductive and Capacitive 23.12 RLC Series AC Circuits Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 24 Electromagnetic Waves Introduction to Electromagnetic Waves 24.1 Maxwell’s Equations: Electromagnetic Waves Predicted and Observed 24.2 Production of Electromagnetic Waves 24.3 The Electromagnetic Spectrum 24.4 Energy in Electromagnetic Waves Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 25 Geometric Optics Introduction to Geometric Optics 25.1 The Ray Aspect of Light 25.2 The Law of Reflection 25.3 The Law of Refraction 25.4 Total Internal Reflection 25.5 Dispersion: The Rainbow and Prisms 25.6 Image Formation by Lenses 25.7 Image Formation by Mirrors Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 26 Vision and Optical Instruments Introduction to Vision and Optical Instruments 26.1 Physics of the Eye 26.2 Vision Correction 26.3 Color and Color Vision 26.4 Microscopes 26.5 Telescopes 26.6 Aberrations Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 27 Wave Optics Introduction to Wave Optics 27.1 The Wave Aspect of Light: Interference 27.2 Huygens's Principle: Diffraction 27.3 Young’s Double Slit Experiment 27.4 Multiple Slit Diffraction 27.5 Single Slit Diffraction 27.6 Limits of Resolution: The Rayleigh Criterion 27.7 Thin Film Interference 27.8 Polarization 27.9 Extended Topic Microscopy Enhanced by the Wave Characteristics of Light Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 28 Special Relativity Introduction to Special Relativity 28.1 Einstein’s Postulates 28.2 Simultaneity And Time Dilation 28.3 Length Contraction 28.4 Relativistic Addition of Velocities 28.5 Relativistic Momentum 28.6 Relativistic Energy Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 29 Quantum Physics Introduction to Quantum Physics 29.1 Quantization of Energy 29.2 The Photoelectric Effect 29.3 Photon Energies and the Electromagnetic Spectrum 29.4 Photon Momentum 29.5 The Particle-Wave Duality 29.6 The Wave Nature of Matter 29.7 Probability: The Heisenberg Uncertainty Principle 29.8 The Particle-Wave Duality Reviewed Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 30 Atomic Physics Introduction to Atomic Physics 30.1 Discovery of the Atom 30.2 Discovery of the Parts of the Atom: Electrons and Nuclei 30.3 Bohr’s Theory of the Hydrogen Atom 30.4 X Rays: Atomic Origins and Applications 30.5 Applications of Atomic Excitations and De-Excitations 30.6 The Wave Nature of Matter Causes Quantization 30.7 Patterns in Spectra Reveal More Quantization 30.8 Quantum Numbers and Rules 30.9 The Pauli Exclusion Principle Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 31 Radioactivity and Nuclear Physics Introduction to Radioactivity and Nuclear Physics 31.1 Nuclear Radioactivity 31.2 Radiation Detection and Detectors 31.3 Substructure of the Nucleus 31.4 Nuclear Decay and Conservation Laws 31.5 Half-Life and Activity 31.6 Binding Energy 31.7 Tunneling Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 32 Medical Applications of Nuclear Physics Introduction to Applications of Nuclear Physics 32.1 Diagnostics and Medical Imaging 32.2 Biological Effects of Ionizing Radiation 32.3 Therapeutic Uses of Ionizing Radiation 32.4 Food Irradiation 32.5 Fusion 32.6 Fission 32.7 Nuclear Weapons Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 33 Particle Physics Introduction to Particle Physics 33.1 The Yukawa Particle and the Heisenberg Uncertainty Principle Revisited 33.2 The Four Basic Forces 33.3 Accelerators Create Matter from Energy 33.4 Particles, Patterns, and Conservation Laws 33.5 Quarks: Is That All There Is? 33.6 GUTs: The Unification of Forces Glossary Section Summary Conceptual Questions Problems & Exercises Chapter 34 Frontiers of Physics Introduction to Frontiers of Physics 34.1 Cosmology and Particle Physics 34.2 General Relativity and Quantum Gravity 34.3 Superstrings 34.4 Dark Matter and Closure 34.5 Complexity and Chaos 34.6 High-temperature Superconductors 34.7 Some Questions We Know to Ask Glossary Section Summary Conceptual Questions Problems & Exercises
- Assistant
To cover the content related to "Thermal Expansion and Kinetic Theory" from the Pearson Education material in the "College Physics 2e" by OpenStax, you should focus on the following chapters:
-
Chapter 13: Temperature, Kinetic Theory, and the Gas Laws
- This chapter addresses the kinetic theory of gases, the ideal gas law, and the molecular interpretation of temperature, which aligns with the kinetic theory content from the Pearson strand.
- Specifically, look at:
- 13.1 Temperature
- 13.2 Thermal Expansion of Solids and Liquids
- 13.3 The Ideal Gas Law
- 13.4 Kinetic Theory: Atomic and Molecular Explanation of Pressure and Temperature
-
Chapter 14: Heat and Heat Transfer Methods
- While this chapter is more focused on heat transfer, it provides foundational knowledge relevant to understanding thermal expansion in different contexts.
Within these chapters, pay close attention to sections that cover:
- Thermal Expansion: It includes discussions on linear and volume expansion, coefficients of expansion, and practical examples such as bridge expansion and ring fitting.
- Kinetic Theory of Gases: It covers molecular motion, ideal gas law, and Maxwell distribution.
- Molecular and Atomic Theory: Involves understanding atomic masses, molecular arrangements in different states, and related theory aspects.
These chapters will provide a comprehensive understanding of how temperature changes affect molecular motion and the resulting physical changes in materials, paralleling the examples and concepts provided by Pearson.
-