Sure! Here's a graduate-level engineering question and answer based on fluid mechanics,…
- User
Sure! Here's a graduate-level engineering question and answer based on fluid mechanics, a common subject in mechanical and aerospace engineering graduate programs:
Question: A long cylindrical pipe with a radius of 𝑅 R and length 𝐿 L is completely filled with a viscous fluid of dynamic viscosity 𝜇 μ. The pipe is oriented horizontally, and a constant pressure drop Δ 𝑃 ΔP is applied across the pipe's length. Assuming laminar flow conditions, derive an expression for the volumetric flow rate 𝑄 Q of the fluid through the pipe using the Navier-Stokes equations.
- Assistant
Answer:
To derive the expression for the volumetric flow rate ( Q ) of a viscous fluid through a horizontal cylindrical pipe using the Navier-Stokes equations, we'll proceed step by step, making appropriate assumptions based on the problem conditions.
Assumptions:
- Steady Flow: The flow is steady, so all time derivatives are zero.
- Laminar Flow: The flow is laminar, meaning it is smooth and orderly.
- Incompressible Fluid: The fluid density is constant.
- Axisymmetric Flow: There is no variation in the circumferential (( \theta )) direction.
- Fully Developed Flow: The velocity profile does not change along the length of the pipe (( z )-direction), except for the pressure gradient.
Coordinate System:
We'll use cylindrical coordinates (( r, \theta, z )), where:
- ( r ) is the radial coordinate.
- ( \theta ) is the angular coordinate.
- ( z ) is the axial coordinate along the length of the pipe.
Deriving the Velocity Profile Using Navier-Stokes Equations:
The Navier-Stokes equation for incompressible, steady, laminar flow in the ( z )-direction simplifies to:
[ 0 = -\frac{dP}{dz} + \mu \left( \frac{1}{r} \frac{d}{dr}\left( r \frac{dV_z}{dr} \right) \right) ]
where:
- ( V_z ) is the axial velocity component, a function of ( r ) only.
- ( \frac{dP}{dz} ) is the pressure gradient along the pipe.
- ( \mu ) is the dynamic viscosity of the fluid.
Step 1: Simplify the Equation
Let ( G = \frac{dP}{dz} ) (pressure gradient), which is constant due to the constant pressure drop ( \Delta P ) over length ( L ):
[ \frac{1}{r} \frac{d}{dr}\left( r \frac{dV_z}{dr} \right) = \frac{G}{\mu} ]
Step 2: Multiply Both Sides by ( r )
[ \frac{d}{dr}\left( r \frac{dV_z}{dr} \right) = \frac{G r}{\mu} ]
Step 3: Integrate with Respect to ( r )
Integrate the equation once:
[ \int \frac{d}{dr}\left( r \frac{dV_z}{dr} \right) dr = \int \frac{G r}{\mu} dr ]
Simplify:
[ r \frac{dV_z}{dr} = \frac{G}{2\mu} r^2 + C_1 ]
Step 4: Apply Boundary Condition at ( r = 0 )
At the centerline (( r = 0 )), the derivative ( \frac{dV_z}{dr} ) must be finite. To avoid a singularity, ( C_1 = 0 ).
Step 5: Solve for ( \frac{dV_z}{dr} )
[ \frac{dV_z}{dr} = \frac{G r}{2\mu} ]
Step 6: Integrate Again to Find ( V_z )
[ \int \frac{dV_z}{dr} dr = \int \frac{G r}{2\mu} dr ]
[ V_z(r) = \frac{G}{4\mu} r^2 + C_2 ]
Step 7: Apply No-Slip Boundary Condition at ( r = R )
At the pipe wall (( r = R )), the fluid velocity ( V_z(R) = 0 ):
[ 0 = \frac{G}{4\mu} R^2 + C_2 ]
Solve for ( C_2 ):
[ C_2 = -\frac{G R^2}{4\mu} ]
Step 8: Write the Final Velocity Profile
[ V_z(r) = \frac{G}{4\mu} \left( r^2 - R^2 \right) ]
This is a parabolic velocity profile characteristic of laminar flow in a pipe.
Calculating the Volumetric Flow Rate ( Q ):
The volumetric flow rate is the integral of the velocity profile over the pipe's cross-sectional area:
[ Q = \int_{\text{Area}} V_z(r) , dA ]
In cylindrical coordinates:
[ dA = 2\pi r , dr ]
Substitute ( V_z(r) ) and ( dA ):
[ Q = \int_{0}^{R} V_z(r) , 2\pi r , dr = \int_{0}^{R} \left( \frac{G}{4\mu} (r^2 - R^2) \right) 2\pi r , dr ]
Simplify constants:
[ Q = \frac{\pi G}{2\mu} \int_{0}^{R} (r^2 - R^2) r , dr ]
Evaluate the Integral:
[ \int_{0}^{R} (r^2 - R^2) r , dr = \int_{0}^{R} \left( r^3 - R^2 r \right) dr = \left[ \frac{r^4}{4} - \frac{R^2 r^2}{2} \right]_0^R ]
Compute the definite integral:
[ \left( \frac{R^4}{4} - \frac{R^2 R^2}{2} \right) - \left( 0 - 0 \right) = \frac{R^4}{4} - \frac{R^4}{2} = -\frac{R^4}{4} ]
Plug Back into ( Q ):
[ Q = \frac{\pi G}{2\mu} \left( -\frac{R^4}{4} \right) = -\frac{\pi G R^4}{8\mu} ]
Recall that ( G = \frac{dP}{dz} = -\frac{\Delta P}{L} ), since the pressure decreases along the pipe's length:
[ G = -\frac{\Delta P}{L} ]
Substitute ( G ) into the expression for ( Q ):
[ Q = -\frac{\pi (-\Delta P / L) R^4}{8\mu} = \frac{\pi R^4 \Delta P}{8\mu L} ]
Final Expression for the Volumetric Flow Rate ( Q ):
[ \boxed{Q = \frac{\pi R^4 \Delta P}{8\mu L}} ]
Conclusion:
The volumetric flow rate ( Q ) of a viscous fluid through a horizontal cylindrical pipe under laminar flow conditions is given by:
[ Q = \frac{\pi R^4 \Delta P}{8\mu L} ]
This is known as the Hagen-Poiseuille equation, which describes the flow rate of a Newtonian fluid in a circular pipe due to a pressure difference.