Can you increase the performances of this ABB RobotStudio RAPID code? MODULE Module1…
- User
Can you increase the performances of this ABB RobotStudio RAPID code? MODULE Module1 !========================= START MODULE PAR================================================ ! Point Target CONST robtarget home:=[[1750,0,1500],[0.707106781,0,0.707106781,0],[0,0,0,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristIn:=[[2216,-1500,2040],[0.707106781,0,0.707106781,0],[-1,0,-1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristSing:=[[2216,0,2000],[0.707106781,0,0.707106781,0],[-1,-1,0,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristOut:=[[2216,1500,2020],[0.707106781,0,0.707106781,0],[9E+09,9E+09,9E+09,1],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget ShoulderIn:=[[0,1500,3050],[1,0,0,0],[1,-2,1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget ShoulderSing:=[[0,0,3050],[1,0,0,0],[1,-2,1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget ShoulderOut:=[[0,-1500,3050],[1,0,0,0],[-1,-2,-2,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST jointtarget ElbowIn:=[[0, 0, -70, 0, 60, 0], [ 0, 9E9, 9E9, 9E9, 9E9, 9E9] ]; CONST jointtarget ElbowSing:= [[0, 0, -83.95, 0, 60, 0], [ 0, 9E9, 9E9, 9E9, 9E9, 9E9] ]; CONST jointtarget ElbowOut:=[[0, 0, -90, 0, 60, 0],[ 0, 9E9, 9E9, 9E9, 9E9, 9E9] ]; CONST robtarget WristIn_HYD_Tool_LH_v3:=[[4137.801,-500,1064.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[-1,0,-1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristSing_HYD_Tool_LH_v3:=[[4137.801,773,1064.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[-1,0,-1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristOut_HYD_Tool_LH_v3:=[[4137.801,2273,1064.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[0,1,-2,1],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget home_HYD_Tool_LH_v3:=[[3637.801,273,564.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[-1,-1,0,1],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]];
!=============================== END MODULE PAR ================================================= ! MAIN FUNCTION PROC main() !Clear TP TPErase; !Stop; !Starting WRIST Singularity check !SingArea \Wrist; MoveJ home_HYD_Tool_LH_v3,v1000,z100,HYD_Tool_LH_v3\WObj:=wobj0; !MoveL_Sing WristIn_HYD_Tool_LH_v3,v1000,fine,HYD_Tool_LH_v3,wobj0; MoveJ WristIn_HYD_Tool_LH_v3,v1000,fine,HYD_Tool_LH_v3\WObj:=wobj0; !MoveL WristOut_HYD_Tool_LH_v3,v1000,fine,HYD_Tool_LH_v3\WObj:=wobj0; MoveL_Sing WristOut_HYD_Tool_LH_v3,v2000,fine,HYD_Tool_LH_v3, wobj0,\nds_in:=10; !MoveL_Sing WristOut_HYD_Tool_LH_v3,v2000,fine,HYD_Tool_LH_v3, wobj0; !Movej home_HYD_Tool_LH_v3,v1000,z100,HYD_Tool_LH_v3\WObj:=wobj0;! Save_numArray_ToFile nIndex_vals, "index_vals_toShoulderOut"; ! Save_numArray_ToFile nDet_vals, "det_vals_toShoulderOut";
ENDPROCENDMODULE
- Assistant
Certainly! I can help optimize your ABB RobotStudio RAPID code to enhance its performance. The goal is to reduce cycle time and ensure smooth robot movements while maintaining safety and precision where necessary. Below, I'll analyze your code and suggest improvements, followed by the revised code with explanations.
Analysis of the Original Code
-
Movement Commands:
- MoveJ home_HYD_Tool_LH_v3:
- Joint move to the home position at speed
v1000with a corner zonez100.
- Joint move to the home position at speed
- MoveJ WristIn_HYD_Tool_LH_v3:
- Joint move to
WristIn_HYD_Tool_LH_v3at speedv1000withfinetermination.
- Joint move to
- MoveL_Sing WristOut_HYD_Tool_LH_v3:
- Linear move through a singularity to
WristOut_HYD_Tool_LH_v3at speedv2000withfinetermination and\nds_in:=10.
- Linear move through a singularity to
- MoveJ home_HYD_Tool_LH_v3:
-
Observations:
- Use of
fineTermination:finetermination causes the robot to come to a complete stop at the specified position, which can increase cycle time.
- Speeds (
v1000,v2000):- Speeds are moderate; if the robot and the process allow, increasing speeds can reduce cycle time.
- Corner Zones (
z100):- Used in the first
MoveJcommand, allowing for smooth transitions.
- Used in the first
- Use of
-
Potential Improvements:
- Replace
finewith Corner Zones:- If precise stopping at a point isn't necessary, using a corner zone (
z10,z50, etc.) can reduce cycle time by allowing continuous motion.
- If precise stopping at a point isn't necessary, using a corner zone (
- Increase Speeds:
- If safe and appropriate, increasing speeds can enhance performance.
- Optimize
\nds_inParameter:- Reducing the
\nds_invalue or removing it can improve performance by reducing computational load.
- Reducing the
- Replace
Optimized Code with Explanations
MODULE Module1 !========================= START MODULE PAR================================================ ! Point Target Declarations (unchanged) CONST robtarget home_HYD_Tool_LH_v3:=[[3637.801,273,564.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[-1,-1,0,1],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristIn_HYD_Tool_LH_v3:=[[4137.801,-500,1064.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[-1,0,-1,0],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; CONST robtarget WristOut_HYD_Tool_LH_v3:=[[4137.801,2273,1064.6],[0.183012702,-0.183012702,-0.683012702,-0.683012702],[0,1,-2,1],[9E+09,9E+09,9E+09,9E+09,9E+09,9E+09]]; ! Tool and Work Object Declarations (assumed to be defined elsewhere) !=============================== END MODULE PAR ================================================= PROC main() TPErase; ! Move to Home Position MoveJ home_HYD_Tool_LH_v3, v2000, z100, HYD_Tool_LH_v3 \WObj:=wobj0; ! Explanation: Increased speed to v2000 for faster movement if safe. ! Move to WristIn Position with Smooth Transition MoveJ WristIn_HYD_Tool_LH_v3, v2000, z10, HYD_Tool_LH_v3 \WObj:=wobj0; ! Explanation: Replaced 'fine' with 'z10' to allow continuous motion without stopping. ! Linear Move through Singularity to WristOut Position MoveL_Sing WristOut_HYD_Tool_LH_v3, v2000, z10, HYD_Tool_LH_v3, wobj0; ! Explanation: ! - Replaced 'fine' with 'z10' for smoother motion. ! - Removed '\nds_in:=10' to use the default value (usually 5), which may improve performance. ! Return to Home Position if necessary ! MoveJ home_HYD_Tool_LH_v3, v2000, z100, HYD_Tool_LH_v3 \WObj:=wobj0; ! Explanation: Uncomment if the robot needs to return home after completing tasks. ENDPROC ENDMODULE
Explanation of Improvements
-
Replaced
finewith Corner Zones (z10):- Reasoning:
- Using a corner zone allows the robot to pass through the point without stopping, reducing cycle time.
- A smaller corner zone value (
z10) maintains path accuracy while allowing for smoother transitions.
- Impact:
- Reduces unnecessary stops, leading to faster execution while keeping the motion precise.
- Reasoning:
-
Increased Speeds (
v2000):- Reasoning:
- If the robot's payload and the application's safety considerations allow, increasing speed reduces movement time.
- Impact:
- Shortens cycle times without compromising safety if within the robot's capabilities.
- Reasoning:
-
Optimized
\nds_inParameter inMoveL_Sing:- Reasoning:
- The
\nds_inparameter specifies the number of divisions used to smooth the path through singularities. - Removing it defaults to a standard value (usually 5), which can be sufficient and less computationally intensive.
- The
- Impact:
- Reduces processing overhead during the singularity handling, potentially improving performance.
- Reasoning:
-
Removed Unnecessary Comments and Code:
- Reasoning:
- Cleaning up the code improves readability and maintainability.
- Removing commented-out code unless necessary reduces clutter.
- Impact:
- Makes the code cleaner and easier to understand for future maintenance.
- Reasoning:
Additional Recommendations
-
Verify Tool and Work Object Data:
- Ensure that
HYD_Tool_LH_v3andwobj0are correctly defined and calibrated, as inaccuracies can affect movement precision.
- Ensure that
-
Safety Checks:
- Before increasing speeds or changing termination types, verify that these changes are safe for the specific application.
- Consider the robot's load, reach, and any potential obstacles in the workspace.
-
Motion Profile Optimization:
- Acceleration and Deceleration:
- Adjusting the acceleration (
accSet) and deceleration parameters can further optimize motion if cycle time reduction is critical.
- Adjusting the acceleration (
- Synchronization:
- If multiple robots or external devices are involved, ensure movements are synchronized to prevent waiting times.
- Acceleration and Deceleration:
-
Testing and Validation:
- After making changes, simulate the robot's movements in RobotStudio to verify that the path is correct and that there are no collisions or singularities not properly handled.
- Perform a real-world test in a controlled environment to confirm performance improvements and safety.
-
Error Handling:
- Incorporate error handling routines to manage unexpected events, such as obstructions or singularities not accounted for.
Conclusion
By making these adjustments, the robot's movements become smoother and faster without sacrificing accuracy where it's essential. Always ensure that any changes comply with safety standards and robot operating limits. Testing in both simulation and real-world environments is crucial to validate the performance gains and to ensure that the robot operates as intended.
If you have further questions or need additional assistance with specific aspects of your code or robot configuration, feel free to ask!
-