Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

Poutnik's Trekking profile template for Trekking profile variants Version 2.7.* - Univ…

  1. User

    Poutnik's Trekking profile template for Trekking profile variants

    Version 2.7.* - Univ factor adjust system, Changed back to quadratic function

    - Merged tandem by Leopold Keller

    - Not Too Steep mode hills=6

    - ported ETA parameters from Trekking.brf

    - ported %parameters% shared with Trekking.brf to be able to use them in BRouter-web dialog.

    - tweaked UnivFactorCoefficient.

    - Travel_Mode

    *) = See also https://github.com/poutnikl/Brouter-profiles/wiki

    **) = See also https://github.com/poutnikl/Trekking-Poutnik/wiki

    ***) = See also https://github.com/poutnikl/Brouter-profiles/wiki/Glossary

    LEGEND

    Legend above is the placeholder for generated comments of final profiles

    See the HistoryLog.txt file for file history, the wikis above for verbose comments.

    bstart /global

    ---context:global

    Bike profile

    assign validForBikes = true

    assign is_wet 0 # %is_wet% Wet_conditions assign avoid_unpaved 0 # %avoid_unpaved% assign cycleroutes_pref 0.2 # also CRP *) costfactor penalty for not being cycleroute assign MTB_factor 0.0 # default 0.0, *) assign smallpaved_factor 0.0 # default 0.0, *) assign hills 1 # 1=default / 0=BRouter default/ 1=+ penalty for uphills >3.0%/ 2=velomobile-like avoiding slopes, 3= simulates ascend/length time equiv. # 4=valley mode, 5=No-Flats mode, 6=Not steep mode assign isbike_for_mainroads true # default=true / if false then bike friendly tag hints for mainroads are ignored, keeping their high penalties. v2.5.20 assign path_preference 0.0 # 0.0 as default, try 0-20, see ***) assign UnifactorAdjust 0.0 # 0.0 as default, Use value let says -0.75..+0.75. assign tandem_mode 0 # 0 as default, changing it increases pushpenalty, haulpenalty, dismountpenalty below assign Travel_Mode add 0 add 0 add 0 add 0 add 0 add 0 add 0 add 0 add 0 0 # 0 as default, optins are additive as 2^N numbers # options marked by the same +)-like mark are mutually exclusive # options marked by the same x)-like mark are additive # 1 as hills 2 ( 1/80 uphill 0.5/80 downhill ) +) # 2 as +20 kg and -15 Watts as heavy load expedition mode # 4 as hills 6 (NotTooSteepMode) +) ( default 8-13% transition slope) # 8 as avoid_unsafe

    assign consider_smoothness 1 # 1 as default assign allow_traffic_penalty 1 # 1 as default

    Use the following switches to change behaviour

    assign allow_steps = true # %allow_steps% | Set to false to disallow steps | boolean assign allow_fords 1 # 1 as default assign allow_ford_stepping 1 # 1 as default assign allow_ferries = true # %allow_ferries% | set to false to disallow ferries | boolean assign avoid_unsafe = false # %avoid_unsafe% | Set to true to avoid standard highways | boolean assign considerTurnRestrictions = false # %considerTurnRestrictions% | Set to true to take turn restrictions into account | boolean assign processUnusedTags = false # %processUnusedTags% | Set to true to output unused tags in data tab | boolean

    Change elevation parameters

    assign consider_elevation = true # %consider_elevation% | Set to false to ignore elevation in routing | boolean

    Kinematic model parameters (travel time computation)

    assign totalMass = 110 # %totalMass% | Mass (in kg) of the bike + biker, for travel time computation | number assign maxSpeed = 35 # %maxSpeed% | Absolute maximum speed (in km/h), for travel time computation | number assign S_C_x = 0.225 # %S_C_x% | Drag coefficient times the reference area (in m^2), for travel time computation | number assign C_r = 0.01 # %C_r% | Rolling resistance coefficient (dimensionless), for travel time computation | number assign bikerPower = 100 # %bikerPower% | Average power (in W) provided by the biker, for travel time computation | number

    ----- profile kinematic model modifications

    assign bikermass 87 assign bikemass 14 assign luggagemass 20 assign bikerPowerDrop 15

    Turn instructions settings

    assign turnInstructionMode = 1 # %turnInstructionMode% | Mode for the generated turn instructions | [0=none, 1=auto-choose, 2=locus-style, 3=osmand-style, 4=comment-style, 5=gpsies-style, 6=orux-style] assign turnInstructionCatchingRange = 20 # %turnInstructionCatchingRange% | Within this distance (in m) several turning instructions are combined into one and the turning angles are better approximated to the general direction | number assign turnInstructionRoundabouts = true # %turnInstructionRoundabouts% | Set to "false" to avoid generating special turning instructions for roundabouts | boolean

    assign StrictNOBicycleaccess 0 # 0 allows but penalizes foot only access / 1 forbides foot only access. assign valley_nonflat_multiplier = 2.0

    assign allow_default_barrier_restriction false # If true, default access for barrier=gate is false. see node context assign ignore_cycle_barrier 1 # a cycle barrier has no effect with the default value 1 (usually ok for normal bikes)

    ----------------------------------------------------------------------------------------------------

    Internal parameters - not intended to be tweaked by end users, unless they know what they are doing.

    new in 2.7

    assign debug false assign debugcost 5.0

    # new in 2.7

    BEGIN - Internal parareters for hills = 6 - experimental avoiding of too steep hills

    via strongly penalizing uphillcostfactor

    ***) = See also https://github.com/poutnikl/Brouter-profiles/wiki/Glossary

    assign TooSteepUphill 5.0 # slope below this uphill limit ( % ) has no penalization assign TooSteepbufferreduce 7.0 # The width of the uphill scope transient zone
    assign TooSteepUphillCost 80.0 # can be used optionally, but is rather overrun by the uphillcostfactor. assign TooSteepCostFactor 20 # for uphill scope > TooSteepUphill + TooSteepbufferreduce
    # with the transient zone TooSteepUphill .. TooSteepUphill + TooSteepbufferreduce assign TooSteepPenaltybuffer 12.0 # higher than default 5 to filter SRTM artefacts assign TooSteepMaxbuffer 20.0 # higher than default 10 to filter SRTM artefacts

    END - Internal parareters for hills = 6 - experimental avoiding of too steep hills via strongly penalizing uphillcostfactor

    == Travel_mode - parameter overriding begin (v2.7)

    assign c_tm_h2 1 assign c_tm_mass 2 assign c_tm_h6 4 assign c_tm_aa 8

    assign tm_aa not lesser Travel_Mode c_tm_aa assign Travel_Mode sub Travel_Mode ( switch tm_aa c_tm_aa 0 ) assign tm_h6 not lesser Travel_Mode c_tm_h6 assign Travel_Mode sub Travel_Mode ( switch tm_h6 c_tm_h6 0 ) assign tm_mass not lesser Travel_Mode c_tm_mass assign Travel_Mode sub Travel_Mode ( switch tm_mass c_tm_mass 0 ) assign tm_h2 not lesser Travel_Mode c_tm_h2 assign Travel_Mode sub Travel_Mode ( switch tm_h2 c_tm_h2 0 )

    assign hills if tm_h6 then 6 else if tm_h2 then 2 else hills assign totalMass add bikemass add bikermass ( switch tm_mass luggagemass 0 ) assign bikerPower sub bikerPower ( switch tm_mass bikerPowerDrop 0 )

    assign avoid_unsafe if tm_aa then true else avoid_unsafe assign TooSteepUphill if tm_h6 then 8 else TooSteepUphill #Not too steep assign TooSteepbufferreduce if tm_h6 then 5 else TooSteepbufferreduce #Not too steep

    == Travel_mode - parameter overriding end

    #new in 2.5.12

    assign NoFlatMode equal hills 5 assign ValleyMode equal hills 4 assign TooSteepMode equal hills 6 #v2.8 assign originalisbike false

    Do not confuse these profile internals

    with BRouter parameters without the "value".

    assign uphillcostvalue switch equal hills 1 70 switch equal hills 2 80 switch equal hills 3 60 switch ValleyMode 150 switch NoFlatMode 0 switch TooSteepMode TooSteepUphillCost 0 assign uphillcutoffvalue switch equal hills 1 3.0 switch equal hills 2 1.0 switch equal hills 3 0.5 switch ValleyMode 1.5 switch NoFlatMode 1.5 switch TooSteepMode TooSteepUphill 1.5 assign downhillcutoffvalue switch equal hills 1 1.5 switch equal hills 2 0.5 switch equal hills 3 1.5 switch ValleyMode 1.5 switch NoFlatMode 1.5 switch TooSteepMode 0.5 1.5 assign downhillcostvalue switch equal hills 1 60 switch equal hills 2 80 switch equal hills 3 0 switch ValleyMode 150 switch NoFlatMode 0 switch TooSteepMode 80 0

    assign Flat_Penalty if NoFlatMode then 1.5 else 0.0

    ==============================================

    ===== Road preference processing =====

    ==============================================

    positive smallpaved factor effect subtracts itself from MTB factor effect

    on MTB-like OSM way preference and elevation effect attenuation

    #v2.5.14 assign MTBminusSP_factor sub MTB_factor ( max 0 smallpaved_factor ) - pre v2.5.14 #v2.5.14 assign Hill_factor min 3 max -3 sub MTB_factor smallpaved_factor
    assign Road_factor min 3 max -3 ( sub ( sub 0.0 MTB_factor ) smallpaved_factor )

    assign positive_smallpaved_factor not lesser smallpaved_factor 0.0 assign abs_smallpaved_factor multiply ( switch positive_smallpaved_factor 1.0 -1.0 ) smallpaved_factor

    assign MTB_hillcostfactor multiply 0.3333 Hill_factor # It changes hillcosts to be 0.0 at Hill_factor = 3.0 and twice at -3.0 # Hill_factor 1..-1 leads hillcost to decrease e.g. from 60 to 40 / increase from 60 to 80

    ==============================================

    ===== Elevation processing =====

    ==============================================

    assign downhillcost if ( consider_elevation ) then ( multiply ( sub 1.0 MTB_hillcostfactor ) downhillcostvalue ) else 0 assign uphillcost if ( consider_elevation ) then ( if TooSteepMode then uphillcostvalue else ( multiply ( sub 1.0 MTB_hillcostfactor ) uphillcostvalue ) ) else 0 assign uphillcutoff if ( consider_elevation ) then ( if TooSteepMode then uphillcutoffvalue else ( multiply ( max 0.0 min 1.0 add 1.0 MTB_hillcostfactor ) uphillcutoffvalue ) ) else 1.5 assign downhillcutoff if ( consider_elevation ) then ( multiply ( max 0.0 min 1.0 add 1.0 MTB_hillcostfactor ) downhillcutoffvalue ) else 1.5

    assign elevationpenaltybuffer if ValleyMode then 10 else if TooSteepMode then TooSteepPenaltybuffer else 5 # 5 is trekking default assign elevationmaxbuffer if ValleyMode then 20 else if TooSteepMode then TooSteepMaxbuffer else 10 # 10 is trekking default assign elevationbufferreduce if ValleyMode then 0.0 else if TooSteepMode then TooSteepbufferreduce else ( multiply 0.333 max uphillcutoff downhillcutoff ) # 0.0 is trekking default

    ======================================================

    ===== pushing and tandem mode related penalties =====

    ======================================================

    assign pushpenaltydefault 6 assign pushpenaltytandemdefault 6 assign pushpenaltySensitivity 1.0 assign pushpenaltyRoadHill max 1 add pushpenaltydefault multiply pushpenaltySensitivity multiply 0.5 ( sub Road_factor Hill_factor )

    assign pushpenalty switch tandem_mode max pushpenaltyRoadHill pushpenaltytandemdefault pushpenaltyRoadHill # added to the costfactor where cycling is not allowed assign dismountpenalty switch tandem_mode 250 100 # added to initialcost of a way or node when forced to get off bike assign haulpenalty switch tandem_mode 500 40 # added to costfactor where the bike needs to be lifted and carried

    assign uphillCFshift 0.0 # experimental shifting of up/downhillcostfactors as alternative way of assign downhillCFshift 0.0 # prioritizing/penalizing of up/downhills, based on length, not elevation

    assign pass1coefficient 1.8 assign pass2coefficient 0

    assign use_proposed_cn 1 # 0 as default, considers proposed cycle networks as unmarked but valid cycleroutes.

    assign unsafe_penalty_value 1.0 # 1 - was 2 in Trekking, but this may cause U-like safe routes assign cost_of_unknown 2.0 # 2 as default, cost of highway=

    ==============================================

    ===== Ford crossing global data =====

    ==============================================

    assign c_ford_initialcost_node = 500 assign c_ford_initialcost_way = 1000 assign c_ford_costfactor = 50 assign million = 1000000

    assign ford_handling_coef switch ( lesser Hill_factor -1.49 ) million switch ( lesser Hill_factor -0.99 ) 20 switch ( lesser Hill_factor -0.49 ) 5.0 switch ( lesser Hill_factor 0.01 ) 1.0 switch ( lesser Hill_factor 0.51 ) 0.4 switch ( lesser Hill_factor 1.01 ) 0.1 switch ( lesser Hill_factor 1.51 ) 0.05 0.0

    assign ford_initialcost_way = if ( equal ford_handling_coef million ) then million else if ( equal ford_handling_coef 0.0 ) then 0.0 else multiply c_ford_initialcost_way ford_handling_coef

    assign ford_initialcost_node = if ( equal ford_handling_coef million ) then million else if ( equal ford_handling_coef 0.0 ) then 0.0 else multiply c_ford_initialcost_node ford_handling_coef

    assign ford_costfactor = if ( equal ford_handling_coef million ) then 9999 else if ( equal ford_handling_coef 0.0 ) then 1.0 else add 1.0 multiply ( sub c_ford_costfactor 1 ) ford_handling_coef

    assign UDcostON true

    assign ncncoef max 0 min 1 multiply cycleroutes_pref 0.2 assign lcncoef max 0 min 1 multiply cycleroutes_pref 1.0

    bend /global

    bstart /way

    ---context:way # following code refers to way-tags

    bstart /wayvariables

    assign isicn route_bicycle_icn=yes assign isncn or route_bicycle_ncn=yes ncn=yes assign isrcn or route_bicycle_rcn=yes rcn=yes assign islcn or route_bicycle_lcn=yes lcn=yes

    assign any_cycleroute or route_bicycle_icn=yes or route_bicycle_ncn=yes or route_bicycle_rcn=yes route_bicycle_lcn=yes

    assign any_cn_yes or lcn=yes or rcn=yes ncn=yes assign any_cn_proposed or lcn=proposed or rcn=proposed ncn=proposed assign any_cn or any_cn_yes switch use_proposed_cn any_cn_proposed 0

    assign nodeaccessgranted or any_cycleroute any_cn

    assign is_ldcr if ( equal cycleroutes_pref 0.0 ) then false else nodeaccessgranted

    assign istrack highway=track|road|path|footway assign ismainroad highway=motorway|motorway_link|trunk|trunk_link|primary|primary_link|secondary|secondary_link|tertiary|tertiary_link|unclassified assign isotherroad = not or istrack ismainroad

    assign hascycleway = not and ( or cycleway= cycleway=no|none ) and ( or cycleway:left= cycleway:left=no ) ( or cycleway:right= cycleway:right=no )

    #2.6.* inserted originalisbike option
    assign isbike_candidate or bicycle_road=yes or bicycle=yes|permissive|designated or hascycleway if originalisbike then lcn=yes else nodeaccessgranted

    assign isbike and ( or ( not ismainroad ) isbike_for_mainroads ) isbike_candidate

    assign ispaved surface=paved|asphalt|concrete|paving_stones|metal|grass_paver|wood|clay #metal, wood added in v2.7 assign isunpaved not or surface= or ispaved or surface=fine_gravel surface=cobblestone

    assign probablyGood = or ispaved and ( or isbike highway=footway ) not isunpaved #probably good surface - weather independent

    assign turncost if ismainroad then 90 else if ispaved then 60 else 30

    Turn cost is based solely on estimation of road speediness and eventual time cost of turning, partially promoting tracks )

    assign ismuddy and is_wet and ( not surface=gravel|pebblestone ) # ***) ( or isunpaved ( and surface= and highway=track|path not tracktype=grade1 ) )

    assign nosurface or surface= surface=unknown assign nosurfacenortracktype and nosurface tracktype= assign ishard or ispaved or tracktype=grade1 surface=cobblestone|sett|compacted|fine_gravel|gravel|pebblestone
    assign issoft not or nosurface ishard

    assign isresidentialorliving = or highway=residential|living_street living_street=yes

    assign noCrossingPenalty = and not hascycleway ( or ismainroad highway=residential|living_street|service )

    bend /wayvariables

    bstart /wayaccess

    assign defaultaccess = if ( ford=yes ) then false else if ( ford=stepping_stones ) then false else if access= then not motorroad=yes else if access=private then false else if access=no then false else if access=agricultural then false else if access=customers then false else if access=delivery then false else if access=permissive then true else if access=destination then true else if access=designated then true ##else if access=forestry then false else true

    assign bikeaccess = if nodeaccessgranted then true else if hascycleway then true else if bicycle= then ( if bicycle_road=yes then true else if vehicle= then ( if highway=footway then false else defaultaccess ) else not vehicle=private|no ) else not bicycle=private|no|dismount

    assign footaccess = if bikeaccess then true else if bicycle=dismount then true else if foot= then defaultaccess else not foot=private|no

    assign accesspenalty = if bikeaccess then 0 else if footaccess then ( if StrictNOBicycleaccess then 10000 else pushpenalty ) else 10000

    handle one-ways. On primary roads, wrong-oneways should be close to forbidden

    while on other ways we just add pushpenalty (default was 4) to the costfactor

    as you are allowed to push your bike.

    assign badoneway = if reversedirection=yes then if oneway:bicycle=yes then true
    else if oneway= then junction=roundabout else oneway=yes|true|1 else oneway=-1

    assign onewaypenalty = if ( badoneway ) then if cycleway=opposite|opposite_lane|opposite_track then 0 else if oneway:bicycle=no then 0 else if highway=primary|primary_link then 50 else if highway=secondary|secondary_link then 30 else if highway=tertiary|tertiary_link then 20 else pushpenalty

       else 0.0   
    

    bend /wayaccess

    bstart /initialcost

    assign initialclassifier if route=ferry then 1 else if not bikeaccess then 16 else if ( ford=yes ) then 15 else if ( highway=motorway|motorway_link ) then 2 else if ( highway=trunk|trunk_link ) then 3 else if ( highway=primary|primary_link ) then 4 else if ( highway=secondary|secondary_link ) then 5 else if ( highway=tertiary|tertiary_link ) then 6 else if ( highway=unclassified ) then 7 else if ( highway=residential ) then 8 else if ( highway=living_street ) then 9 else if ( highway=service ) then 10 else if ( service=parking_aisle ) then 11 else if ( service=driveway ) then 12 else if ( service=alley ) then 13 else if ( service=drive-through ) then 14 else if ( service=emergency_access ) then 15 else if ( highway=footway ) then 16 else if ( istrack ) then 17 else if ( highway=cycleway ) then 18 else 14

    assign initialcost if route=ferry then 10000 else if ( ford=yes ) then ford_initialcost_way
    else add ( switch bikeaccess 0 dismountpenalty ) if ( highway=motorway|motorway_link|trunk|trunk_link ) then 999999 else if ( highway=primary|primary_link ) then 999999 else if ( highway=secondary|secondary_link ) then 999999 else if ( highway=tertiary|tertiary_link ) then 90000 else if ( highway=path ) then 5000 else if ( highway=track ) then 100 else if ( highway=unclassified ) then 50 else if ( highway=road ) then 50 else if ( highway=residential ) then 30 else if ( highway=living_street ) then 25 else if ( service=parking_aisle ) then 20 else if ( service=driveway ) then 20 else if ( service=alley ) then 20 else if ( service=drive-through ) then 15 else if ( service=emergency_access ) then 10 else if ( highway=service ) then 5 else 30

    bend /initialcost

    bstart /roadmaxpenalties

    bstart /roughness_penalty

    assign smoothness_penalty

    http://wiki.openstreetmap.org/wiki/Key:smoothness

    if not consider_smoothness then 0.0 else if smoothness= then 0.0 else #PL tłum* jeśli występuje samo: smoothness if smoothness=excellent|very_good then 0.0 else if smoothness=good then 0.1 else if smoothness=intermediate then 5.0 else if smoothness=medium then 5.0 else ##average if smoothness=bad|robust_wheels|poor then 10.0 else if smoothness=rough then 15.0 else if smoothness=very_bad|high_clearance then 20.0 else if smoothness=horrible|off_road_wheels then 500.0 else ##terrible if smoothness=very_horrible then 700.0 else if smoothness=impassable then 1000.0 else 0.0

    assign mtb_scale_penalty if not consider_smoothness then 0.0 else

    if not consider_smoothness then 0.0 else if trail_visibility=excellent then 0.0 else if trail_visibility=good then 0.1 else if trail_visibility=intermediate then 0.3 else if trail_visibility=bad then 5 else if trail_visibility=horrible then 9 else if trail_visibility=no then 15 else

    Remember this is for trekking bikes, not MTB. There are MTB dedicated profiles.

    http://wiki.openstreetmap.org/wiki/Key:mtb:scale

    if mtb:scale= then 0.0 else if mtb:scale=0- then 0.0 else if mtb:scale=0 then 0.0 else if mtb:scale=0+ then 0.3 else if mtb:scale=1- then 0.7 else if mtb:scale=1 then 1.2 else if mtb:scale=1+ then 10.0 else if mtb:scale=2- then 20.0 else if mtb:scale=2 then 40.0 else if mtb:scale=2+ then 100.0 else if mtb:scale=3 then 200.0 else if mtb:scale=4 then 500.0 else if mtb:scale=5 then 1000.0 else if mtb:scale=6 then 5000.0 else 0.0

    assign roughness_penalty max smoothness_penalty max mtb_scale_penalty ( if ford=yes then ( sub ford_costfactor 1 ) else 0 )

    bend /roughness_penalty

    bstart /MTB_SP_tweaks

    assign rough_coef = add 1.0 ( multiply 0.33 roughness_penalty )

    assign univ_factor_coef_raw if ismainroad then ( add ( switch isunpaved -0.5 0 ) switch highway=motorway|motorway_link|trunk|trunk_link 1.0 switch highway=primary|primary_link 0.9 switch highway=secondary|secondary_link 0.7 switch highway=tertiary|tertiary_link 0.4 switch highway=unclassified 0.25 0 ) else if istrack then ( add ( switch highway=path|footway -0.25 0.0 ) switch or ispaved tracktype=grade1 0.1 multiply rough_coef
    switch ( nosurfacenortracktype ) ( switch isbike 0.0 -0.25 ) switch nosurface
    ( switch or isbike tracktype=grade2|grade3 -0.25 -0.5 ) switch surface=compacted|fine_gravel -0.25 switch surface=cobblestone|sett -0.4 switch surface=ground|grass -0.5 switch surface=sand|dirt|mud -0.6
    switch surface=gravel|pebblestone|mud -0.75 -0.6 ) else ( switch ispaved 0.25 switch isunpaved -0.25 0.0 )

    UCF = UCFR + UFA - UFA * UCFR * UCFR

    assign univ_factor_coef if equal UnifactorAdjust 0.0 then univ_factor_coef_raw else sub ( add univ_factor_coef_raw UnifactorAdjust ) ( multiply UnifactorAdjust multiply univ_factor_coef_raw univ_factor_coef_raw )

    assign nonpath_penalty = if equal path_preference 0.0 then 0.0 # nonpath_penalty inactive else multiply ( max 0 path_preference ) if ismainroad then 1
    else if not or istrack highway=cycleway then 0.6 else if ispaved then 0.4
    else if or not highway=path or not isunpaved tracktype=grade1|grade2 then 0.25 else if or not isunpaved or not highway=path or not tracktype=grade3|grade4|grade5 surface=gravel|cobblestone|pebblestone
    then 0.15 else 0.0

    assign MTB_factor_for_road if ( equal MTB_factor 0.0 ) then 0.0 else multiply MTB_factor univ_factor_coef

    assign abs_univ_factor if lesser univ_factor_coef 0.0 then multiply -1.0 univ_factor_coef else univ_factor_coef

    assign smallpaved_factor_for_road if ( equal smallpaved_factor 0.0 ) then 0.0 else multiply abs_smallpaved_factor if positive_smallpaved_factor then abs_univ_factor else ( sub 1.0 abs_univ_factor )

    bend /MTB_SP_tweaks

    bstart /HWclass_bfactor_components

    assign highwayclass_basefactor
    if ismainroad then switch highway=trunk|trunk_link 1.8 switch highway=primary|primary_link 1.5 switch highway=secondary|secondary_link 1.2 switch highway=tertiary|tertiary_link 1.1 1.0 else if istrack then switch highway=track 0.0 switch highway=path 500.0 switch highway=road 0.0 switch highway=footway 1.2 1.0 # highway=road else switch highway=pedestrian 2.0 switch highway=bridleway 3.0 switch highway=cycleway 1.0 switch isresidentialorliving 1.0 switch highway=service 1.1 switch service=parking_aisle 1.5 switch service=driveway 1.2 switch service=alley 0.5 switch service=drive-through 1.0 switch service=emergency_access 4.0 cost_of_unknown

    assign tracktype_penalty if tracktype= then 0.0 else switch tracktype=grade1 0.0 switch tracktype=grade2 0.3 switch tracktype=grade3 0.6 switch tracktype=grade4 1.0 switch tracktype=grade5 100.0 0.5

    assign surface_penalty if nosurface then 0.0 else switch surface=asphalt 0.0 switch concrete=lanes 0.5 switch concrete=plates 6.0
    switch surface=concrete 0.2 switch surface=metal 0.3 switch surface=paved 0.5 switch surface=paving_stones 0.4 switch surface=grass_paver 3.7 switch surface=wood 0.3 switch surface=clay 0.0 switch surface=cobblestone 6.0 switch surface=sett 4.8 switch surface=gravel 8.0 switch surface=pebblestone 1.2
    switch surface=ground|earth|dirt 7.0 switch surface=unpaved 5.0 switch surface=compacted 4.0 switch surface=fine_gravel 7.0 switch surface=grass 8.0 switch surface=sand 7.7 switch surface=mud 9.0 0.6

    assign tracktype_surface_penalty if nosurfacenortracktype then ( switch ismainroad 0.0 switch isotherroad 0.0 switch highway=path 0.8 0.4 ) else if nosurface then tracktype_penalty else if tracktype= then surface_penalty else max tracktype_penalty surface_penalty

    assign not_isbike_penalty if isbike then 0.0 else if ismainroad then add switch bicycle=use_sidepath 2.0 0.0
    switch highway=trunk|trunk_link 8.2 switch highway=primary|primary_link 1.5
    switch highway=secondary|secondary_link 0.4 0.3 # tertiary|tertiary_link|unclassified else if istrack then
    switch highway=footway 3.5 switch or ispaved tracktype=grade1 0.0 switch and tracktype= not isunpaved ( switch highway=path 3.5 1.0 ) switch tracktype= 3.0 switch tracktype=grade1 0.2 switch tracktype=grade2 0.6 switch tracktype=grade3 1.2 switch tracktype=grade4 2.0 switch tracktype=grade5 3.0 3.0 else switch highway=pedestrian 2.0 switch highway=bridleway 2.0 switch highway=cycleway 0.0 switch highway=residential|living_street 0.0 switch highway=service 0.0
    switch service=parking_aisle 0.0
    switch service=driveway 0.0
    switch service=alley 0.0
    switch service=drive-through 0.0
    switch service=emergency_access 4.0 0.0

    assign wet_penalty if not is_wet then 0.0 else switch surface=cobblestone|sett 1.0 switch ispaved 0.0 switch surface=compacted 0.6 switch surface=fine_gravel 0.8 switch surface= switch not istrack 0.5 switch highway=path 2.0 1.0 switch surface=grass switch highway=path 2.5 1.5 switch surface=ground|earth|unpaved|sand|dirt|mud switch highway=path 3.5 2.0 2.0

    bend /HWclass_bfactor_components

    bend /roadmaxpenalties

    bstart /trafficpenalties

    Penalty for unsafe roads. As wet fallback, it does not so strictly avoid unsafe

    assign unsafe_penalty
    if and avoid_unsafe and ismainroad not isbike then multiply unsafe_penalty_value ( if is_wet then 0.5 else 1.0 )
    else 0.0

    assign trafficpenalty0 = ( if not allow_traffic_penalty then 0.0 else if highway=primary|primary_link then ( if estimated_traffic_class=4 then 0.2 else if estimated_traffic_class=5 then 0.4 else if estimated_traffic_class=6|7 then 0.6 else 0 ) else if highway=secondary|secondary_link then ( if estimated_traffic_class=3 then 0.2 else if estimated_traffic_class=4 then 0.4 else if estimated_traffic_class=5 then 0.6 else if estimated_traffic_class=6|7 then 1 else 0 ) else if highway=tertiary|tertiary_link then ( if estimated_traffic_class=2 then 0.1 else if estimated_traffic_class=3 then 0.3 else if estimated_traffic_class=4 then 0.5 else if estimated_traffic_class=5|6|7 then 1 else 0 ) else 0 )

    assign trafficpenalty = if hascycleway then min 0.3 trafficpenalty0 else trafficpenalty0

    bend /trafficpenalties

    bstart /costfactors

    assign penaltymax = max roughness_penalty max tracktype_surface_penalty max wet_penalty trafficpenalty

    assign rawcostfactor ( # can be <1, adjusted to >=1 in final step of calculation of costfactor, uphillcostfactor,downhillcostfactor switch and highway= not route=ferry 10000 #only highways unless ferry switch highway=motorway|motorway_link|proposed|abandoned 10000

    all other exclusions below (access, steps, ferries,..) should not be deleted by the decoder, to be available in voice-hint-processing

    min 9999

    switch highway=steps switch allow_steps haulpenalty 10000 switch route=ferry switch allow_ferries 4000 10000 switch ford=yes switch allow_fords 10000 10000 switch ford=stepping_stones switch allow_ford_stepping 6000.0 10000.0 switch highway=construction 10000

    if and avoid_unpaved isunpaved then 50 else add highwayclass_basefactor add not_isbike_penalty add unsafe_penalty max penaltymax nonpath_penalty )

    assign isCFgt9997 greater rawcostfactor 9997

    assign LDCRboost multiply sub 1.0 rawcostfactor cycleroutes_pref

    assign cycleroute_tweak #2.6 reworked : non cyclenetwork penalty = + cycleroutes_pref ( 0..1 , default 0.2)

    ICN boost = - ( CF - 1 ) * cycleroutes_pref, leading to CF=1.0 for cycleroutes_pref = 1.0

    other CN: weitgted average of above, with weights ncncoef, lcncoef shifting with cycleroutes_pref

         if not greater cycleroutes_pref 0.0 then
            0.0
         else if not is_ldcr then
           cycleroutes_pref
         else if isicn then 
            LDCRboost
         else if isncn then
            add multiply ncncoef cycleroutes_pref
                multiply ( sub  1.0 ncncoef ) LDCRboost 
         else
            add multiply lcncoef cycleroutes_pref
                multiply ( sub  1.0 lcncoef ) LDCRboost 
                                                 
    

    can be <1, adjusted to >=1 in final step of calculation

    of costfactor, uphillcostfactor,downhillcostfactor

    assign rawcostfactor2 if isCFgt9997 then rawcostfactor else if debug then add debugcost add MTB_factor_for_road smallpaved_factor_for_road else add rawcostfactor add cycleroute_tweak add MTB_factor_for_road smallpaved_factor_for_road

    assign access-penalty max onewaypenalty accesspenalty

    assign costfactor
    if isCFgt9997 then rawcostfactor2 else add access-penalty add Flat_Penalty max 1.0 rawcostfactor2

    assign uphillcostfactor if debug then costfactor else if or not UDcostON isCFgt9997 then costfactor else add access-penalty add switch TooSteepMode ( sub TooSteepCostFactor 1.0 ) 0.0 if ValleyMode then ( multiply rawcostfactor2 valley_nonflat_multiplier ) else add uphillCFshift add rawcostfactor2 switch ismainroad ( multiply 0.4 sub univ_factor_coef 0.5 ) ( multiply -0.5 univ_factor_coef )

    assign downhillcostfactor if debug then costfactor else if or not UDcostON isCFgt9997 then costfactor else add access-penalty max 1.0 if ValleyMode then ( multiply rawcostfactor2 valley_nonflat_multiplier ) else add downhillCFshift add rawcostfactor2 multiply -0.2 univ_factor_coef

    bend /costfactors

    bstart /priorityclassifiers

    way priorities used for voice hint generation

    assign priorityclassifier =

    if ( highway=motorway ) then 30 else if ( highway=motorway_link ) then 29 else if ( highway=trunk ) then 28 else if ( highway=trunk_link ) then 27 else if ( highway=primary ) then 26 else if ( highway=primary_link ) then 25 else if ( highway=secondary ) then 24 else if ( highway=secondary_link ) then 23 else if ( highway=tertiary ) then 22 else if ( highway=tertiary_link ) then 21 else if ( highway=unclassified ) then 20 else if ( isresidentialorliving ) then 6 else if ( highway=service ) then 5 else if ( service=parking_aisle ) then 4 else if ( service=driveway ) then 4 else if ( service=alley ) then 4 else if ( service=drive-through ) then 4 else if ( service=emergency_access ) then 3 else if ( highway=cycleway ) then 2 else if ( or bicycle=designated bicycle_road=yes ) then 1 else if ( highway=track ) then if tracktype=grade1 then 6 else 4 else if ( highway=bridleway|road|path|footway ) then 1 else if ( highway=steps ) then 1 else if ( highway=pedestrian ) then 1 else 0

    some more classifying bits used for voice hint generation...

    assign isbadoneway = not equal onewaypenalty 0 assign isgoodoneway = if reversedirection=yes then oneway=-1 else if oneway= then junction=roundabout else oneway=yes|true|1 assign isroundabout = junction=roundabout assign islinktype = highway=motorway_link|trunk_link|primary_link|secondary_link|tertiary_link assign isgoodforcars = if greater priorityclassifier 6 then true else if ( or isresidentialorliving highway=service ) then true else if service=parking_aisle then true else if service=driveway then true else if service=alley then true else if service=drive-through then true else if service=emergency_access then false else if ( and highway=track tracktype=grade1 ) then true else false

    ... encoded into a bitmask

    assign classifiermask add isbadoneway add multiply isgoodoneway 2 add multiply isroundabout 4 add multiply islinktype 8 multiply isgoodforcars 16

    bend /priorityclassifiers

    bend /way

    bstart /node

    ---context:node # following code refers to node tags

    assign initial_cost_node 0 # 0 as default

    assign defaultaccess =
    if ( highway=traffic_signals ) then true else if ( highway=stop ) then true else if ( highway=give_way ) then true else if ( highway=mini_roundabout ) then true else if ( highway=bus_stop ) then true else if ( highway=speed_camera ) then true else if ( highway=passing_place ) then true

       else if ( railway=crossing ) then true	   
       else if ( railway=level_crossing ) then true	  	   
       
       else if ( barrier=border_control ) then true	  
       else if ( barrier=lift_gate ) then true
       else if ( barrier=cycle_barrier ) then true
       else if ( barrier=sally_port ) then true
       else if ( barrier=chain ) then true
       else if ( barrier=bump_gate ) then true
       else if ( barrier=hampshire_gate ) then true
       else if ( barrier=block ) then true
       else if ( barrier=log ) then true
       else if ( barrier=sump_buster ) then true
       else if ( barrier=spikes ) then true
       else if ( barrier=tree ) then true
       else if ( barrier=fallen_tree ) then true
       else if ( barrier=jersey_barrier ) then true
       else if ( barrier=stone ) then true
       else if ( barrier=rope ) then true
       else if ( barrier=bus_trap ) then true
       else if ( barrier=cattle_grid ) then true
       else if ( barrier=debris ) then true
       else if ( barrier=motorcycle_barrier ) then true
       else if ( barrier=bar ) then true
       else if ( barrier=checkpoint ) then true
       else if ( barrier=horse_stile ) then true
       else if ( barrier=kerb ) then true
       else if ( barrier=ditch ) then true
       else if ( barrier=wall ) then false
       else if ( barrier=turnstile ) then true
       else if ( barrier=kissing_gate ) then true
       else if ( barrier=stile ) then true
       else if ( barrier=bollard ) then true
    ##   else if ( barrier=toll_booth) then true
       ##else if ( barrier=kent_carriage_gap ) then true
       ##else if ( barrier=tank_trap ) then true
       
       else if ( traffic_calming=yes ) then true
       else if ( traffic_calming=speed_bump ) then true
       else if ( traffic_calming=hump ) then true
       else if ( traffic_calming=bump ) then true
       else if ( traffic_calming=table ) then true
       else if ( traffic_calming=cushion ) then true
       else if ( traffic_calming=rumble_strip ) then true
       else if ( traffic_calming=dip ) then true
       else if ( traffic_calming=chicane ) then true
       else if ( traffic_calming=choker ) then true
       else if ( traffic_calming=dip ) then true
       else if ( traffic_calming=island ) then true
      	    
       else if ( highway=crossing ) then true
       else if ( crossing=traffic_signals ) then true
       else if ( crossing=yes ) then true
       	   	   
       else if ( ford=yes ) then true
       else if ( ford=stepping_stones ) then true
       
       
       else if ( access= ) then  if allow_default_barrier_restriction then not barrier=gate # add default barrier restrictions here! - modified v2.5.15, conditioned in 2.6
                                                                 else true 
       else if ( access=private ) then false
       else if ( access=no ) then false
      ## else if ( access=customers ) then true
       else if ( access=agricultural ) then true
       ##else if ( access=delivery ) then false
       else if ( access=permissive ) then true
       else if ( access=destination ) then true
       else if ( access=designated ) then true
      ## else if ( access=forestry ) then false
       else true
    

    assign bikeaccess = if highway=crossing then ( or not bicycle=no|dismount way:noCrossingPenalty ) else if nodeaccessgranted=yes then true else if bicycle= then ( if vehicle= then defaultaccess else not vehicle=private|no ) else not bicycle=private|no|dismount

    assign footaccess = if bicycle=dismount then true else if foot= then defaultaccess else not foot=private|no

    assign initialcost = add ( if ( and barrier=cycle_barrier|chicane not ignore_cycle_barrier ) then ( add ( switch bikeaccess dismountpenalty 0 ) haulpenalty ) else if highway=traffic_signals then 400.0 else if highway=stop then 60.0 else if highway=give_way then 60.0 else if highway=mini_roundabout then 0.4 else if highway=bus_stop then 100.0 #domyślnie 10.0 else if highway=speed_camera then 0.0 #domyślnie 0.0 #PL Fotoradar; fotoradary. Im wyższa wartość tym bardziej rosną szanse na omijanie dróg z fotoradarami else if highway=passing_place then 0.0 #domyślnie 5.0 #PL Punkt mijania; wąska droga. Np. drogi w Norwegii. Im wyższa wartość tym bardziej rosną szanse na omijanie takich dróg; https://wiki.openstreetmap.org/wiki/Tag:highway%3Dpassing_place else if railway=level_crossing then 20.0 #domyślnie 20.0 #PL Przejazdy kolejowe (drogowe). Im wyższa wartość tym większe omijanie dróg z przejazdami kolejowymi. else if railway=crossing then 20.0

              else if traffic_calming=yes          then 2.0
    		  else if traffic_calming=speed_bump   then 2.0
    		  else if traffic_calming=hump         then 2.0
    		  else if traffic_calming=bump         then 2.0
    		  else if traffic_calming=table        then 1.0
    		  else if traffic_calming=cushion      then 1.0
    		  else if traffic_calming=rumble_strip then 0.5
    		  else if traffic_calming=dip          then 1.8
    		  else if traffic_calming=chicane      then 1.0
    		  else if traffic_calming=choker       then 1.0
    		  else if traffic_calming=island       then 0.1	
    
              else if barrier=cattle_grid          then 2.0	       
              else if barrier=lift_gate            then 500.0
              else if barrier=cycle_barrier        then 10.0
              else if barrier=sally_port           then 4000.0
              else if barrier=chain                then 500.0
              else if barrier=bump_gate            then 3000.0
              else if barrier=hampshire_gate       then 3000.0
              else if barrier=block                then 5000.0
              else if barrier=log                  then 1500.0
              else if barrier=sump_buster          then 0.5
              else if barrier=spikes               then 1300.0
              else if barrier=tree                 then 4000.0
              else if barrier=fallen_tree          then 4000.0
              else if barrier=jersey_barrier       then 4000.0   
              else if barrier=stone                then 4000.0
              else if barrier=rope                 then 500.0
              else if barrier=bus_trap             then 2.0
              else if barrier=gate                 then 50.0
    		  else if barrier=motorcycle_barrier   then 400.0
    		  else if barrier=bar                  then 300.0
    		  else if barrier=checkpoint           then 500.0
    		  else if barrier=horse_stile          then 500.0
    		  else if barrier=kerb                 then 100.0
    		  else if barrier=debris               then 4000.0
    		  else if barrier=ditch                then 4000.0
    		  else if barrier=wall                 then 4000.0
    		  else if barrier=turnstile            then 600.0
    		  else if barrier=kissing_gate         then 1000.0
    		  else if barrier=stile                then 700.0
    		  else if barrier=bollard              then 400.0
    		##  else if barrier=toll_booth        then 400.0
              else if ford=yes                     then 10000.0
    		  else if access=no                    then 10000.0
    		  else if access=private               then 10000.0       	      
          ## brak w lookup ## else if access=customers             then 2.0
              else if access=agricultural          then 100.0
            ## brak w lookup ## else if access=delivery              then 10000.0
             ## brak w lookup ## else if access=forestry              then 0.0            
    		  else if ford=stepping_stones         then 6000.0
    		  
              else if barrier=border_control       then 100.0
       
              ##else if ( barrier=kent_carriage_gap ) then true
              ##else if ( barrier=tank_trap ) then true
       
    		  
    		  
    		  
    
             else if highway=crossing                  then 1.0
         else if crossing=yes                      then 1.0
    						else if crossing=uncontrolled     then 2.0 
              else if crossing=traffic_signals                 then 200.0
                            else if crossing=unmarked         then 10.0
                            else if crossing=island           then 1.0
                            else if crossing=zebra            then 1.0
                            else if crossing=no               then 0.0 
    		
    
    		
    		## else if obstacle=yes 0
    		## else if obstacle=vegetation
    		## else if obstacle=yes 0
    		## else if obstacle=fallen_tree 0
    		## else if obstacle=unevenness 0
    		## else if obstacle=precipice 0
    		## else if obstacle=heap 0
    		## else if obstacle=hole 0
              else initial_cost_node )
            if bikeaccess then 0  else ( if footaccess then dismountpenalty else 1000000 )
    

    bend /node

    Czy widzisz tu jakiś błąd w kodzie lub braki?

  2. Assistant

    Przeglądając przedstawiony kod profilu dla BRoutera, nie zauważyłem żadnych oczywistych błędów ani braków. Kod wydaje się być poprawnie sformatowany i zgodny ze składnią używaną w profilach BRoutera.

    Oto kilka punktów, które sprawdziłem:

    1. Struktura i sekcje kodu:

      • Użycie znaczników # bstart i # bend jest spójne.
      • Sekcje dla global, way oraz node są poprawnie oznaczone i oddzielone.
    2. Przypisania i warunki:

      • Użycie instrukcji assign, if, else if, switch oraz operatorów takich jak add, sub, multiply czy max jest zgodne ze składnią BRoutera.
      • Zmienne są poprawnie inicjalizowane przed użyciem.
    3. Nazewnictwo zmiennych:

      • Zmienna cycleroutes_pref jest używana spójnie w całym kodzie (zwróć uwagę, aby nie pomylić z cyclroutes_pref).
      • Zmienna originalisbike jest zdefiniowana i używana w warunkach.
    4. Logika warunków:

      • Warunki złożone są poprawnie skonstruowane, np. użycie or, and, not, equal, lesser.
      • Sprawdziłem konstrukcje takie jak if ... then ... else, które wydają się być prawidłowe.
    5. Komentarze i sekcje wykomentowane:

      • Niektóre linie są wykomentowane za pomocą ##, co jest poprawne i nie wpływa na działanie kodu.
      • Upewnij się, że wykomentowane sekcje są celowe i nie zawierają kodu, który powinien być aktywny.

    Jeśli napotykasz na błędy podczas uruchamiania tego profilu w BRouterze lub masz konkretne obawy co do pewnych fragmentów kodu, proszę podaj więcej szczegółów. Chętnie pomogę w dokładniejszej analizie i rozwiązaniu ewentualnych problemów.