III. Consider a system composed of a very large number N of distinguishable atoms at…
- User
III. Consider a system composed of a very large number N of distinguishable atoms at rest and mutually noninteracting, each of which has only two (nondegenerate) energy levels: 0, > 0. Let E/N be the mean energy per atom in the limit N → ∞.
a) What is the maximum possible value of E/N if the system is not necessarily in thermodynamic equilibrium? b) What is the maximum attainable value of E/N if the system is in equilibrium (at positive temperature)? c) For thermodynamic equilibrium compute the entropy per atom as a function of E/N. Suppose now that the system is in a thermal radiation field at temperature T. The following three processes take place:
- Atoms can be promoted from state 1 to state 2 by absorption of a photon according to ( dN1 dt )abs = −B12N1ρ(ν)
- Atoms can decay from state 2 to state 1 by spontaneous emission according to ( dN2 dt )spon = −A21N2
- Atoms can decay from state 2 to state 1 by stimulated emission according to ( dN1 dt )sti = −B12N1ρ(ν) The populations N1 and N2 are in thermal equilibrium, and the radiation density is ρ(ν) = 8πhν3 c 3 1 e hν/T − 1 d) What is the ratio N2 N1 ? e) Calculate the ratios of coefficients A21/B21 and B21/B12. f) From the ratio of stimulated to spontaneous emission, how does the pump power scale with wavelength when you try to make short wavelength lasers?
- Assistant
To solve the problems, let's go through them systematically:
a) Maximum possible value of ( E/N ) (not necessarily in equilibrium)
In a system where each atom can occupy one of two energy levels, 0 and ( \epsilon > 0 ), the maximum possible energy per atom occurs when all atoms occupy the higher energy state ( \epsilon ). Thus, the maximum value of ( E/N ) is: [ E/N = \epsilon ]
b) Maximum attainable value of ( E/N ) in equilibrium at positive temperature
In thermal equilibrium, the distribution of atoms over the energy levels is given by the Boltzmann distribution. The fraction of atoms in the higher energy level is given by: [ \frac{N_2}{N} = \frac{e^{-\epsilon/kT}}{1 + e^{-\epsilon/kT}} ]
As temperature ( T ) approaches infinity, this fraction approaches 0.5. Therefore, the maximum attainable value of ( E/N ) in equilibrium at positive temperature is: [ E/N = \frac{\epsilon}{2} ]
c) Entropy per atom as a function of ( E/N )
The entropy per atom can be defined in terms of the probabilities ( p_1 ) and ( p_2 ) of occupying the lower energy level (0) and the higher energy level (( \epsilon )), respectively. These probabilities are related to the energy by: [ E/N = \epsilon p_2 ]
Thus, [ p_1 = 1 - p_2 = 1 - \frac{E}{N\epsilon} ] [ p_2 = \frac{E}{N\epsilon} ]
The entropy per atom ( S/N ) is: [ S/N = -k [p_1 \ln(p_1) + p_2 \ln(p_2)] ]
Substituting for ( p_1 ) and ( p_2 ), we find: [ S/N = -k \left[ \left(1 - \frac{E}{N\epsilon}\right) \ln\left(1 - \frac{E}{N\epsilon}\right) + \frac{E}{N\epsilon} \ln\left(\frac{E}{N\epsilon}\right) \right] ]
d) Ratio ( N_2/N_1 )
In thermal equilibrium, the ratio of populations of two energy levels is given by the Boltzmann factor: [ \frac{N_2}{N_1} = e^{-\epsilon/kT} ]
Given the radiation density ( \rho(\nu) ), the formula remains applicable in this thermal radiation equilibrium scenario.
e) Ratios of coefficients ( A_{21}/B_{21} ) and ( B_{21}/B_{12} )
Using Einstein's relations:
- ( A_{21} = \frac{8\pi h \nu^3}{c^3} B_{21} )
- ( g_1 B_{12} = g_2 B_{21} )
For non-degenerate states ( g_1 = g_2 ), so ( B_{21} = B_{12} ).
Therefore: [ \frac{A_{21}}{B_{21}} = \frac{8\pi h \nu^3}{c^3} ]
And: [ \frac{B_{21}}{B_{12}} = 1 ]
f) Scaling of pump power with wavelength for short wavelength lasers
The ratio of stimulated emission to spontaneous emission in terms of the radiation density: [ \frac{(dN_1/dt){sti}}{(dN_2/dt){spon}} = \frac{B_{21} \rho(\nu)}{A_{21}} ]
Using: [ \rho(\nu) = \frac{8\pi h \nu^3}{c^3}\frac{1}{e^{h\nu/kT} - 1} ] [ \frac{B_{21} \rho(\nu)}{A_{21}} = \frac{1}{e^{h\nu/kT} - 1} ]
At shorter wavelengths (higher ( \nu )), ( h\nu/kT ) becomes large, thus ( e^{h\nu/kT} ) increases, and the fraction decreases. Therefore, more pump power is required for short wavelengths to overcome this decrease, scaling exponentially with the energy gap ( h\nu ).
This highlights the difficulty of achieving laser action at short wavelengths due to the increasing amount of required pump power.
- User
Let 𝐹(𝜆) = ∫ 𝑑𝑥 𝑒 𝜆𝑥−𝑥 2 +∞ −∞ If the Taylor series expansion of 𝐹(𝜆) around 𝜆 = 0 is 𝐹(𝜆) = 𝐹0 + 𝐹1𝜆 + 𝐹2𝜆 2 + ∙∙∙∙ then the value of 𝐹2 is (You might find the following integral useful: ∫ 𝑑𝑥 𝑒 −𝛼𝑥 +∞ 2 −∞ = √ 𝜋 𝛼 for 𝛼 > 0) (a) √𝜋/4 (b) √𝜋/8 (c) √𝜋/2 (d) √�
- Assistant
To determine ( F_2 ), we need to find the second derivative of ( F(\lambda) ) with respect to ( \lambda ) at ( \lambda = 0 ). The function is given by:
[ F(\lambda) = \int_{-\infty}^{+\infty} e^{\lambda x - x^2} , dx ]
This can be rewritten as:
[ F(\lambda) = \int_{-\infty}^{+\infty} e^{-(x^2 - \lambda x)} , dx ]
Completing the square in the exponent:
[ x^2 - \lambda x = (x - \frac{\lambda}{2})^2 - \frac{\lambda^2}{4} ]
Thus, the integral becomes:
[ F(\lambda) = \int_{-\infty}^{+\infty} e^{-(x - \frac{\lambda}{2})^2} e^{\frac{\lambda^2}{4}} , dx ]
Since the integral of a Gaussian function over the entire real line is independent of the center (as long as the variance is constant), we have:
[ \int_{-\infty}^{+\infty} e^{-(x - \frac{\lambda}{2})^2} , dx = \int_{-\infty}^{+\infty} e^{-x^2} , dx = \sqrt{\pi} ]
Therefore:
[ F(\lambda) = \sqrt{\pi} \cdot e^{\frac{\lambda^2}{4}} ]
Now, we need the second derivative of ( F(\lambda) ) at ( \lambda = 0 ):
First, take the derivative of ( F(\lambda) ):
[ \frac{d}{d\lambda} F(\lambda) = \sqrt{\pi} \cdot \frac{d}{d\lambda} e^{\frac{\lambda^2}{4}} = \sqrt{\pi} \cdot \frac{\lambda}{2} e^{\frac{\lambda^2}{4}} ]
Then, take the second derivative:
[ \frac{d^2}{d\lambda^2} F(\lambda) = \sqrt{\pi} \cdot \left(\frac{1}{2} e^{\frac{\lambda^2}{4}} + \frac{\lambda^2}{4} e^{\frac{\lambda^2}{4}} \right) ]
Evaluate this at ( \lambda = 0 ):
[ \frac{d^2}{d\lambda^2} F(\lambda) \bigg|_{\lambda = 0} = \sqrt{\pi} \cdot \frac{1}{2} ]
Therefore, the coefficient ( F_2 ) is:
[ F_2 = \frac{\sqrt{\pi}}{2} ]
The correct answer is (c) (\frac{\sqrt{\pi}}{2}).