I'd like to create a python script that can help me profile the maximum rate at which I…
- User
I'd like to create a python script that can help me profile the maximum rate at which I can trigger an industrial camera. The idea is kind of iterative and as follows:
- The script triggers a number of acquisitions over tcp socket A with a specific frequency.
- It awaits all responses and measures the time it takes to get all responses over tcp socket B and calculates the average time for the responses.
- Based on the average time from the previous test, a new frequency is calculated and the script repeats from step 1.
- When the highest achievable frequency where the camera can keep up is found, report this as the result.
The behavior of the camera is a bit tricky. If it receives triggers too fast, it will queue them and perform them in sequence and continue until all triggers have been processed. If the camera is pushed to the limit, the response time will increase, but if it is not running on its critical timelimit the responses appear earlier. It seems the camera needs some time to recover inbetween the triggers.
I did a similar program that worked a bit differently, but i think this new method is much better. You can use the ip address, tcp sockets and command information from the program below, but do not use any of the workflow ideas from the current implementation:
import datetime import os import sys import time import socket import pandas as pd from openpyxl import load_workbook
def send_trigger(s, res, interval): start_send = time.time_ns() s.sendall(b'\x02trigger\x03') try: response = res.recv(1024) except socket.timeout: res.settimeout(10) try: response = res.recv(1024) except: pass res.settimeout(interval) response = b'' end_send = time.time_ns() send_duration = (end_send - start_send) / 1e9 return send_duration, response
def trigger_camera(interval, num_measurements): timeout_count = 0 time_to_responses = [] actual_time = [] res = socket.socket(socket.AF_INET, socket.SOCK_STREAM) res.connect((ip_address, 8999)) res.settimeout(0.2) try: response = res.recv(1024) except socket.timeout: pass res.settimeout(interval) with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s: s.connect((ip_address, 6666))
for i in range(num_measurements): start_time = time.time_ns() ttr, response = send_trigger(s, res, interval) time_to_responses.append(ttr) remaining_time = max(0, interval - ttr) time.sleep(remaining_time) stop_time = time.time_ns() actual_time_taken = (stop_time - start_time) / 1e6 actual_time.append(actual_time_taken) sys.stdout.write( f'\rInterval: {interval*1000:.1f}ms Iteration: {i} Timeouts: {(timeout_count / (i+0.00000001)) * 100:.1f}%, actual_time_taken {actual_time_taken:.1f}ms TTR:{ttr*1000:.1f}ms') sys.stdout.flush() if not response: timeout_count += 1 res.close() avg_time_to_responses = sum(time_to_responses) / num_measurements avg_actual_time_taken = sum(actual_time) / num_measurements timeout_percentage = (timeout_count / num_measurements) * 100 return avg_actual_time_taken, avg_time_to_responses, timeout_count, timeout_percentagedef find_optimal_interval(): global ip_address ip_address = input( f"IP Address ({'192.168.137.201'}): ") or '192.168.137.201' print("Overtriggering the camera to estimate response time...") _, avg_time_to_responses, _, _ = trigger_camera( 0.001, 50) # 50 iterations for overtriggering initial_estimate = avg_time_to_responses * 1000 # Convert to milliseconds
print(f"\nEstimated response time: {initial_estimate:.2f}ms") # Prompt for user input after initial overtriggering with pre-filled defaults camera = input(f"Camera ({'Inspector8xx'}): ") or 'Inspector8xx' resolution = input(f"Resolution ({'5MP'}): ") or '5MP' exposure_time = input(f"Exposure time [us] ({'70'}): ") or '70' job = input(f"Job ({'Empty'}): ") or 'Empty' channels = input(f"Channels ({'mono'}): ") or 'mono' tool_time = input(f"Tool time [ms] ({'0'}): ") or '0' reported_time = input(f"Reported time [ms] ({'0'}): ") or '0' low_interval = max(0, initial_estimate - 1) / 1000 best_interval = None best_timeout_percentage = float('inf') consecutive_below_2 = 0 valid_intervals = [] print( f"Evaluating around the estimated response time: starting from {low_interval*1000:.2f}ms") interval_ms = int(low_interval*1000) while True: interval = interval_ms / 1000 _, _, _, timeout_percentage = trigger_camera( interval, 100) # 100 iterations per step print( f"\nInterval: {interval_ms}ms, Timeout Percentage: {timeout_percentage:.2f}%") if timeout_percentage < 2: consecutive_below_2 += 1 if consecutive_below_2 == 3: valid_intervals.append(interval_ms) # Continue searching consecutive_below_2 = 0 else: consecutive_below_2 = 0 interval_ms += 1 # Exit loop if valid intervals are found if valid_intervals: break # If no valid intervals are found, use a default interval or handle the error if not valid_intervals: print("No valid intervals found where timeout percentage is below 2%") return None, None, None, None, None, camera, resolution, exposure_time, job, ip_address, channels, tool_time, reported_time # Find the lowest interval among valid intervals best_interval = min(valid_intervals) # Perform final measurement at the best interval avg_actual_time_taken, avg_time_to_responses, timeout_count, timeout_percentage = trigger_camera( best_interval / 1000, 400) return best_interval, avg_actual_time_taken, avg_time_to_responses, timeout_count, timeout_percentage, camera, resolution, exposure_time, job, ip_address, channels, tool_time, reported_timeif name == "main": best_interval, avg_actual_time_taken, avg_time_to_responses, timeout_count, timeout_percentage, camera, resolution, exposure_time, job, ip_address, channels, tool_time, reported_time = find_optimal_interval()
current_time = datetime.datetime.now() folder_name = current_time.strftime("%Y-%m-%d_%H-%M-%S") os.makedirs(folder_name) filename = (f"{camera}_{resolution}_{exposure_time}us_{job}_" f"{ip_address}_{channels}_{tool_time}ms_{reported_time}ms_" f"Results_{current_time.strftime('%Y%m%d_%H%M%S')}.xlsx") unified_filename = "Unified_Results.xlsx" # Prepare data to append data = { "Camera": [camera], "Resolution": [resolution], "Exposure Time (us)": [exposure_time], "Job": [job], "IP Address": [ip_address], "Channels": [channels], "Tool Time (ms)": [tool_time], "Reported Time (ms)": [reported_time], "Interval (ms)": [best_interval], "Avg. Actual Time Taken (ms)": [f'{avg_actual_time_taken:.2f}'], "Avg. Time to responses (ms)": [f'{avg_time_to_responses*1000:.2f}'], "Timeout Count": [timeout_count], "Timeout Percentage": [f"{timeout_percentage:.2f}%"] } df = pd.DataFrame(data) if os.path.exists(unified_filename): with pd.ExcelWriter(unified_filename, engine='openpyxl', mode='a', if_sheet_exists='overlay') as writer: df.to_excel(writer, index=False, header=False, startrow=writer.sheets['Sheet1'].max_row) else: with pd.ExcelWriter(unified_filename, engine='openpyxl') as writer: df.to_excel(writer, index=False) # Save the individual results to a separate file df.to_excel(os.path.join(folder_name, filename), index=False) print(f"Results saved as {filename} in folder {folder_name}") print(f"Unified results saved in {unified_filename}") - Assistant
Sure! Below is a Python script that implements your new method for profiling the maximum rate at which you can trigger your industrial camera. This script follows your iterative approach:
- Triggers a number of acquisitions over TCP socket A with a specific frequency.
- Awaits all responses and measures the time it takes to get all responses over TCP socket B and calculates the average time for the responses.
- Based on the average time from the previous test, a new frequency is calculated and the script repeats from step 1.
- When the highest achievable frequency where the camera can keep up is found, the result is reported.
The script uses the IP address, TCP sockets, and command information from your previous implementation but follows a new workflow as per your requirements.
import time import socket import sys def send_triggers(socket_trigger, interval, number_of_triggers): sent_times = [] for _ in range(number_of_triggers): t_send = time.time() try: socket_trigger.sendall(b'\x02trigger\x03') except Exception as e: print(f"Error sending trigger: {e}") break sent_times.append(t_send) time.sleep(interval) return sent_times def receive_responses(socket_response, expected_responses, total_timeout): recv_times = [] start_time = time.time() received_count = 0 socket_response.settimeout(0.1) while received_count < expected_responses and (time.time() - start_time) < total_timeout: try: response = socket_response.recv(1024) t_recv = time.time() recv_times.append(t_recv) received_count += 1 except socket.timeout: continue except Exception as e: print(f"Error receiving response: {e}") break return recv_times def calculate_average_response_time(sent_times, recv_times): if not recv_times or len(sent_times) != len(recv_times): print("Mismatch in sent and received triggers/responses.") return None response_times = [recv - sent for sent, recv in zip(sent_times, recv_times)] avg_response_time = sum(response_times) / len(response_times) return avg_response_time def main(): ip_address = input("Enter the camera's IP address (default '192.168.137.201'): ") or '192.168.137.201' number_of_triggers = 50 # Number of triggers to send in each iteration delta_t = 0.01 # Additional time to allow the camera to recover convergence_threshold = 0.0001 # Threshold to determine convergence max_iterations = 20 # Max iterations to prevent infinite loops # Connect to the trigger socket (socket A) try: socket_trigger = socket.socket(socket.AF_INET, socket.SOCK_STREAM) socket_trigger.connect((ip_address, 6666)) except Exception as e: print(f"Failed to connect to trigger socket: {e}") sys.exit(1) # Connect to the response socket (socket B) try: socket_response = socket.socket(socket.AF_INET, socket.SOCK_STREAM) socket_response.connect((ip_address, 8999)) # Read any initial messages socket_response.settimeout(1) try: initial_response = socket_response.recv(1024) except socket.timeout: pass except Exception as e: print(f"Failed to connect to response socket: {e}") sys.exit(1) # Initialize variables for iterative process interval = 0.1 # Initial interval between triggers in seconds iteration = 0 previous_interval = None while iteration < max_iterations: print(f"\nIteration {iteration + 1}: Testing with interval {interval * 1000:.2f} ms") sent_times = send_triggers(socket_trigger, interval, number_of_triggers) total_timeout = (interval + 0.1) * number_of_triggers recv_times = receive_responses(socket_response, number_of_triggers, total_timeout) if len(recv_times) < number_of_triggers: print(f"Only received {len(recv_times)} out of {number_of_triggers} responses.") avg_response_time = calculate_average_response_time(sent_times, recv_times) if avg_response_time is None: print("Unable to calculate average response time. Exiting.") break print(f"Average response time: {avg_response_time * 1000:.2f} ms") # Calculate new interval based on average response time new_interval = avg_response_time + delta_t # Check for convergence if previous_interval is not None and abs(new_interval - previous_interval) < convergence_threshold: print(f"Converged to optimal interval: {new_interval * 1000:.2f} ms") break previous_interval = interval interval = new_interval iteration += 1 # Calculate the maximum achievable frequency max_frequency = 1 / interval print(f"\nMaximum achievable frequency where the camera can keep up: {max_frequency:.2f} Hz") # Close sockets socket_trigger.close() socket_response.close() if __name__ == "__main__": main()How the Script Works:
-
Establish Connections:
- The script connects to the camera's trigger socket (
port 6666) to send triggers. - It also connects to the camera's response socket (
port 8999) to receive responses.
- The script connects to the camera's trigger socket (
-
Iterative Testing:
- The script begins with an initial interval between triggers (e.g.,
0.1seconds). - In each iteration:
- It sends a specified number of triggers (
number_of_triggers) at the current interval. - It collects response times for each trigger.
- Calculates the average response time.
- Adjusts the interval for the next iteration based on the average response time plus an additional delta (
delta_t) to allow the camera to recover. - Checks for convergence by comparing the new interval with the previous interval. If the difference is less than a defined threshold (
convergence_threshold), it stops iterating.
- It sends a specified number of triggers (
- The script begins with an initial interval between triggers (e.g.,
-
Result Reporting:
- After convergence or reaching the maximum number of iterations, the script calculates the maximum achievable frequency where the camera can keep up.
- The result is printed to the console.
Important Points:
-
Sockets and Commands:
- Uses the same IP address, TCP sockets, and command information as your previous implementation.
- Sends the trigger command
b'\x02trigger\x03'over the trigger socket. - Receives responses over the response socket.
-
No Reuse of Previous Workflow Ideas:
- Follows a new workflow as per your request.
- Implements the iterative approach you described without relying on the previous code's logic.
-
Error Handling:
- Includes basic error handling for socket connections and communications.
- Checks for mismatches in the number of sent and received messages.
-
Adjustable Parameters:
- You can adjust
number_of_triggers,delta_t,convergence_threshold, andmax_iterationsas needed.
- You can adjust
How to Use the Script:
-
Ensure the Camera is Accessible:
- Make sure the camera is connected to the network and accessible at the provided IP address.
-
Run the Script:
- Run the script using Python 3.
- If necessary, install any required modules (though the script uses only standard library modules).
-
Input IP Address:
- When prompted, enter the camera's IP address or press Enter to use the default (
192.168.137.201).
- When prompted, enter the camera's IP address or press Enter to use the default (
-
Observe the Output:
- The script will output the progress of each iteration, including the tested interval and the average response time.
- Upon convergence, it will print the maximum achievable frequency.
-
Modify Parameters if Needed:
- If you want to test with different parameters, you can modify the variables at the beginning of the
main()function.
- If you want to test with different parameters, you can modify the variables at the beginning of the
Example Output:
Enter the camera's IP address (default '192.168.137.201'): Iteration 1: Testing with interval 100.00 ms Average response time: 90.50 ms Iteration 2: Testing with interval 100.50 ms Average response time: 90.80 ms Iteration 3: Testing with interval 100.80 ms Average response time: 90.70 ms Converged to optimal interval: 100.80 ms Maximum achievable frequency where the camera can keep up: 9.92 HzNotes:
-
Adjusting
delta_t:- The
delta_tparameter adds extra recovery time for the camera between triggers. - You might need to adjust this value based on the camera's behavior.
- The
-
Convergence Criteria:
- The
convergence_thresholddetermines how close two intervals need to be to consider the results converged. - A smaller threshold leads to more precise results but may require more iterations.
- The
-
Timeout Handling:
- The script sets timeouts for socket operations to prevent it from hanging if the camera does not respond.
Feel free to adjust the script to better suit your specific use case or to integrate additional functionality as needed.