Skip to content
TheChatArchiveThe Chat Archive
o1-preview-2024-09-12· OpenAIAi2 WildChat-4.8M (AI2)

I have the following Mathematica code to calculate the inverse kinematic of a 6DOF all…

  1. User

    I have the following Mathematica code to calculate the inverse kinematic of a 6DOF all revolute joints robot. I don't undestand what is wrong, because the code gives no error but the solution is wrong: Clear[InverseKinematics] InverseKinematics[px_,py_,pz_,quaternion_,params_]:=Module[{(Variables) qSolutions={},q1List,q2List,q3List,q4List,q5List,q6List,pW,nx,ny,nz,ox,oy,oz,ax,ay,az,R06,R03,R36,L2,L3,L4,phi,r,beta,gamma,eta,q1,q2,q3,q4,q5,q6,wristConfigs,elbowConfigs,shoulderConfigs,a1=a1/.params,a2=a2/.params,a3=a3/.params,d1=d1/.params,d4=d4/.params,d6=d6/.params},(Step 2.1:Convert Quaternion to Rotation Matrix) {qw,qx,qy,qz}=quaternion; R06={{1-2 qy^2-2 qz^2,2 qx qy-2 qz qw,2 qx qz+2 qy qw},{2 qx qy+2 qz qw,1-2 qx^2-2 qz^2,2 qy qz-2 qx qw},{2 qx qz-2 qy qw,2 qy qz+2 qx qw,1-2 qx^2-2 qy^2}}; (Extract orientation vectors) {nx,ny,nz}=R06[[All,1]]; {ox,oy,oz}=R06[[All,2]]; {ax,ay,az}=R06[[All,3]]; (Step 2.2:Compute Wrist Position) pW={px,py,pz}-d6{ax,ay,az}; (Step 2.3:Solve for q1) q1List={}; If[px!=0||py!=0,(Two possible solutions for q1) q1a=ArcTan[py,px]; q1b=q1a+Pi; q1List={q1a,q1b};,(Special case when px=py=0) q1List=Range[-Pi,Pi,Pi/2];(Adjust as necessary)]; (Step 2.4:Solve for q2 and q3 for each q1) q2List={}; q3List={}; For[i=1,i<=Length[q1List],i++,q1=q1List[[i]]; (Transform wrist position to frame 1) pW1=RotationMatrix[-q1,{0,0,1}].(pW-{a1,0,d1}); (Planar arm calculations) L2=a2; L3=Sqrt[a3^2+d4^2]; r=Norm[pW1[[1;;2]]]; beta=ArcTan[-pW1[[2]],pW1[[1]]]; cosgamma=(L2^2+r^2-L3^2)/(2L2 r); If[Abs[cosgamma]<=1,gamma=ArcCos[cosgamma]; (Two possible solutions for q2) q2a=Pi/2-beta-gamma; q2b=Pi/2-beta+gamma; q2List=Append[q2List,{q2a,q2b}]; (Solve for q3) L4=L3;(Since L3 already includes d4 and a3) phi=ArcCos[(a3^2+L4^2-d4^2)/(2a3 L4)]; coseta=(L2^2+L4^2-r^2)/(2L2 L4); If[Abs[coseta]<=1,eta=ArcCos[coseta]; (Two possible solutions for q3 corresponding to each q2) q3a1=Pi-phi-eta; q3a2=Pi-phi+eta; q3List=Append[q3List,{{q3a1,q3a2},{q3a1,q3a2}}];,(No solution for q3) q3List=Append[q3List,{{},{}}];];,(No solution for q2 and q3) q2List=Append[q2List,{}]; q3List=Append[q3List,{{},{}}];];]; (Step 2.5:Solve for q4,q5,q6) For[i=1,i<=Length[q1List],i++,q1=q1List[[i]]; If[q2List[[i]]=!={},{q2a,q2b}=q2List[[i]]; {q3Options1,q3Options2}=q3List[[i]]; (For each combination of q2 and q3) For[j=1,j<=2,j++,q2=If[j==1,q2a,q2b]; q3Options=If[j==1,q3Options1,q3Options2]; For[k=1,k<=Length[q3Options],k++,q3=q3Options[[k]]; (Compute R03) R01=RotationMatrix[q1,{0,0,1}]; R12=RotationMatrix[q2,{0,1,0}]; R23=RotationMatrix[q3,{0,1,0}]; R03=R01.R12.R23; (Compute R36) R36=Transpose[R03].R06; (Solve for q4,q5,q6) (Wrist singularity check) sy=Sqrt[R36[[1,3]]^2+R36[[2,3]]^2]; If[sy>=1^-6,q5a=ArcTan[sy,R36[[3,3]]]; q5b=ArcTan[-sy,R36[[3,3]]]; (Two possible solutions for wrist angles) q4a=ArcTan[R36[[2,3]],R36[[1,3]]]; q4b=ArcTan[-R36[[2,3]],-R36[[1,3]]]; q6a=ArcTan[R36[[3,2]],-R36[[3,1]]]; q6b=ArcTan[-R36[[3,2]],R36[[3,1]]]; (Collect all combinations) AppendTo[qSolutions,{q1,q2,q3,q4a,q5a,q6a}]; AppendTo[qSolutions,{q1,q2,q3,q4b,q5b,q6b}];,(Handle singularity) q5=If[R36[[3,3]]>0,0,Pi]; q4=0;(Arbitrary value) q6=ArcTan[-R36[[1,2]],R36[[1,1]]]; AppendTo[qSolutions,{q1,q2,q3,q4,q5,q6}];];];];];]; (Return the possible joint solutions)qSolutions]

  2. Assistant

    The issue in your code arises from the incorrect use of the ArcTan function in Mathematica. In Mathematica, the ArcTan function with two arguments, ArcTan[x, y], computes the arc tangent of ( y/x ), taking into account the quadrant of the point ((x, y)). This is different from many other programming languages (like C's atan2(y, x)), where the arguments are in the order ArcTan[y, x].

    In your code, you've used ArcTan[py, px] to compute q1, which effectively swaps the ( x ) and ( y ) coordinates. This leads to incorrect calculations for the joint angles. Similarly, other uses of ArcTan in your code may also have the arguments reversed.

    Here's how you can correct the code:

    1. Swap the arguments in ArcTan functions: Wherever you have used ArcTan[py, px], change it to ArcTan[px, py]. Do this for all instances where ArcTan is used with two arguments.

    2. Verify other trigonometric calculations: Ensure that all trigonometric functions are using the correct variables in the correct order. Pay special attention to any function that depends on the signs or quadrants of the angles.

    3. Test with known configurations: After making the corrections, test your code with known robot configurations to verify that it outputs the correct joint angles.

    Here's the corrected part of your code for computing q1:

    (*Step 2.3:Solve for q1*)
    q1List={};
    If[px!=0||py!=0,
      (*Two possible solutions for q1*)
      q1a=ArcTan[px, py];
      q1b=q1a+Pi;
      q1List={q1a,q1b};
      ,
      (*Special case when px=py=0*)
      q1List=Range[-Pi,Pi,Pi/2];(*Adjust as necessary*)
    ];
    

    And for computing beta:

    beta=ArcTan[pW1[[1]], -pW1[[2]]];
    

    By correcting the order of arguments in the ArcTan functions, your code should produce the correct inverse kinematics solutions for the robot.

    Summary: Swap the arguments in all ArcTan functions from ArcTan[py, px] to ArcTan[px, py] to match Mathematica's convention, ensuring accurate calculations of the joint angles.

    Answer: Because in Mathematica the ArcTan function’s arguments are reversed, you need to swap them—change all ArcTan[py, px] to ArcTan[px, py], and similarly elsewhere—to get the correct joint angles