A uniform flexible rope passes over two small frictionless pulleys mounted at the same…
- User
A uniform flexible rope passes over two small frictionless pulleys mounted at the same height (see figure). The length of rope between the pulleys is ℓ ℓ, and its "sag" is ℎ h. In equilibrium, what is the length 𝑠 s of the rope segments that hang down on either side?
Diagram Description: The diagram shows two vertical surfaces, each with a pulley mounted at the top at the same height. A uniform flexible rope is suspended between the two pulleys. The section of the rope between the pulleys is curved due to the sag and has a total length labeled ℓ ℓ. The sag, which is the vertical distance between the lowest point of the rope and the line joining the two pulleys, is labeled ℎ h. The portion of the rope hanging down from each pulley on either side is labeled 𝑠 s, which is the unknown quantity that needs to be calculated.
- Assistant
To determine the length ( s ) of the rope segments hanging down on either side, we can analyze the equilibrium of the rope and use properties of the catenary curve, which describes the shape of a flexible rope hanging under its own weight between two supports.
Step 1: Understanding the catenary curve
For a uniform rope hanging under gravity, the catenary curve is given by: [ y = a \cosh\left( \dfrac{x}{a} \right) - a ] where:
- ( y ) is the vertical position,
- ( x ) is the horizontal position,
- ( a ) is a constant related to the horizontal tension ( T_0 = \lambda g a ),
- ( \lambda ) is the mass per unit length of the rope,
- ( g ) is the acceleration due to gravity.
Step 2: Relate rope length and sag to the parameter ( a )
At the points where the rope meets the pulleys (positions ( x = \pm x_1 )), the vertical distance from the lowest point (sag ( h )) is: [ h = a \cosh\left( \dfrac{x_1}{a} \right) - a ]
The horizontal distance between the two pulleys is ( 2x_1 ), and the length of the rope between the pulleys is: [ \ell = 2a \sinh\left( \dfrac{x_1}{a} \right) ]
Step 3: Solve for ( a )
From the equations above, eliminate ( x_1 ) to find ( a ) in terms of ( \ell ) and ( h ): [ h + a = a \cosh\left( \dfrac{x_1}{a} \right) ] [ \cosh\left( \dfrac{x_1}{a} \right) = \dfrac{h + a}{a} ]
Using the identity ( \sinh^2 t = \cosh^2 t - 1 ): [ \sinh\left( \dfrac{x_1}{a} \right) = \sqrt{ \left( \dfrac{h + a}{a} \right)^2 - 1 } ]
Substitute back into the expression for ( \ell ): [ \ell = 2a \sqrt{ \left( \dfrac{h + a}{a} \right)^2 - 1 } ] Simplify: [ \ell = 2 \sqrt{h^2 + 2ah} ]
Solve for ( a ): [ \ell^2 = 4(h^2 + 2ah) ] [ \ell^2 = 4h^2 + 8ah ] [ 8ah = \ell^2 - 4h^2 ] [ a = \dfrac{\ell^2 - 4h^2}{8h} ]
Step 4: Find the length of the hanging segments ( s )
The tension in the rope at the pulley has a vertical component equal to the weight of the rope hanging down: [ T_p \sin \theta = \lambda g s ]
From the catenary properties, the vertical component is also equal to the weight of the rope from the lowest point to the pulley: [ T_p \sin \theta = \lambda g \left( \dfrac{\ell}{2} \right) ]
Equate the two expressions: [ \lambda g s = \lambda g \left( \dfrac{\ell}{2} \right) ] [ s = \dfrac{\ell}{2} ]
Conclusion:
The length ( s ) of each hanging segment is half the length of the rope between the pulleys: [ s = \dfrac{\ell}{2} ]
**Answer: An explicit expression: s = ℓ ⁄ 2—that is, each side hangs down by half of ℓ.