how many grams of sodium bisulphate would i need to add to 15 grams of water to make a 1…
- User
how many grams of sodium bisulphate would i need to add to 15 grams of water to make a 1 molar solution
- Assistant
To make a 1 molar (1 M) solution, you need (1) mole of solute (sodium bisulfate, (\text{NaHSO}_4)) per liter of solution.
Firstly, determine the molecular weight of sodium bisulfate ((\text{NaHSO}_4)):
- Sodium (Na): (22.99 \text{ g/mol})
- Hydrogen (H): (1.01 \text{ g/mol})
- Sulfur (S): (32.07 \text{ g/mol})
- Oxygen (O): (16.00 \text{ g/mol}) (there are (4) oxygen atoms)
The molecular weight calculation is: [ 22.99 + 1.01 + 32.07 + (4 \times 16.00) = 120.07 \text{ g/mol} ]
Now, note that a 1 molar solution means (1) mole of solute in (1) liter of solution. We need to adjust the calculations based on the volume of the solution we want to prepare.
When we add solute to the solvent (water), the total volume of the solution will change. However, for simplicity and general assumption in small scale calculations, we can approximate that the volume of solution is the volume of the solvent plus a small addition from the solute.
Since 1 liter of water is approximately (1000) grams, we can simplify by using a proportion relative to (1) liter. If we want to prepare a solution in (15) grams of water:
- Calculate the proportion of the solution:
Since (15) grams of water represents the solvent, assume the final solution volume remains very close to (15) mL. [ 15 \text{ mL} ]
- Calculate how many moles are needed for (15) mL (0.015 L) of the 1 M solution:
[ 1 \text{ mol/L} \times 0.015 \text{ L} = 0.015 \text{ mol} ]
- Convert moles to grams using the molecular weight of sodium bisulfate:
[ 0.015 \text{ mol} \times 120.07 \text{ g/mol} = 1.80105 \text{ grams} ]
Therefore, you need approximately (1.801) grams of sodium bisulfate to dissolve in (15) grams of water to make a 1 molar solution.
- User
will sodium bisulfate react with magnesium oxide to create a stone like geopolymer when mixed as a paste with water and cured
- Assistant
Creating a stone-like geopolymer material typically involves complex chemistry that often includes the use of alumino-silicate materials activated by an alkaline solution. Sodium bisulfate ((\text{NaHSO}_4)) and magnesium oxide ((\text{MgO})) are not the usual components for traditional geopolymer synthesis.
However, let's examine the chemistry:
-
Sodium Bisulfate ((\text{NaHSO}_4)):
- Sodium bisulfate is an acidic salt formed by partially neutralizing sulfuric acid with sodium hydroxide. In an aqueous solution, it will dissociate to form (\text{Na}^+), (\text{HSO}_4^-), and (\text{H}^+).
-
Magnesium Oxide ((\text{MgO})):
- Magnesium oxide is a basic oxide and reacts with water to form magnesium hydroxide ((\text{Mg(OH)}_2)): [ \text{MgO} + \text{H}_2\text{O} \rightarrow \text{Mg(OH)}_2 ]
When you mix sodium bisulfate and magnesium oxide in water, the acidic nature of sodium bisulfate will neutralize the basic magnesium hydroxide formed. The overall reaction would likely be:
[ \text{HSO}_4^- + \text{OH}^- \rightarrow \text{SO}_4^{2-} + \text{H}_2\text{O} ]
This neutralization reaction forms water and a neutral salt (sodium sulfate, (\text{Na}_2\text{SO}_4)), but it does not typically produce a binding matrix strong enough for geopolymer formation. Geopolymers usually involve a significant amount of polymerization between aluminosilicate materials and an alkaline activator (e.g., sodium or potassium hydroxide).
Why It May Not Form a Geopolymer:
-
Lack of Alumino-silicate Material: Traditional geopolymers rely on sources like metakaolin, fly ash, or blast furnace slag, which possess a rich content of alumina and silica. These materials polymerize in the presence of an alkaline solution to form a solid matrix.
-
Acid-Base Neutralization: The combination of an acid (sodium bisulfate) and a base (magnesium oxide) will generally result in neutralization rather than the polymerization needed for geopolymer formation.
Possible Reactions:
- When mixed, the reaction would be predominantly acid-base with no major network formation. The material may harden due to the reaction but is unlikely to possess the mechanical strength or structural integrity of true geopolymer materials.
While the system you're describing may harden, the resulting material's properties are likely to be different from those of conventional geopolymer binders. Developing a strong, stone-like solid often necessitates specific materials and conditions that promote cross-linking and polymerization of aluminosilicate species. The mixture of sodium bisulfate and magnesium oxide doesn't fit this criterion.
Conclusion: It's improbable that combining sodium bisulfate and magnesium oxide will create a true geopolymer with high structural integrity. To pursue geopolymer synthesis, consider using aluminosilicate precursors and suitable alkaline activators.
-
- User
i'm trying to compare it to the hard stone like structure when magnesium oxide and mono potassium phosphate are mixed to a paste with water and cured , i wondered how it compared and if it would be similar in its strength and hardness
- Assistant
The reaction between magnesium oxide ((\text{MgO})) and mono-potassium phosphate ((\text{KH}_2\text{PO}_4)) is known to form a magnesium phosphate cement (MPC), which results in a hard, stone-like material. This reaction is fairly well-studied and understood in the field of construction materials.
Magnesium Phosphate Cement (MPC)
When (\text{MgO}) reacts with (\text{KH}_2\text{PO}_4), the reaction typically proceeds as follows:
[ \text{MgO} + \text{KH}_2\text{PO}_4} \rightarrow \text{Mg}( \text{KPO}_4} \cdot 6 \text{H}_2\text{O} ]
This reaction forms struvite-K (magnesium potassium phosphate hexahydrate), a phase responsible for the cement's strength and hardness. MPCs are known for their rapid setting and acquire decent mechanical strength in a short time. These are often utilized in repair applications and can exhibit good compressive strength, durability, and resistance to certain chemicals.
Comparing Magnesium Oxide and Sodium Bisulfate Reaction:
The situation is quite different for magnesium oxide reacting with sodium bisulfate ((\text{NaHSO}_4)). As previously discussed, the reaction between (\text{MgO}) and (\text{NaHSO}_4) in water would primarily result in acid-base neutralization:
-
Magnesium oxide reacts with water to form magnesium hydroxide: [ \text{MgO} + \text{H}_2\text{O} \rightarrow \text{Mg(OH)}_2 ]
-
Sodium bisulfate dissociates into (\text{Na}^+) and (\text{HSO}_4^-), which in turn can further dissociate into (\text{H}^+) and (\text{SO}_4^{2-}):
[ \text{NaHSO}_4 \rightarrow \ \text{Na}^+ + \text{HSO}_4^- ] [ \text{HSO}_4^- \rightarrow \text{H}^+ + \text{SO}_4^{2-} ]
-
The (\text{H}^+) ions from (\text{HSO}_4^-) would neutralize the (\text{OH}^-) ions from (\text{Mg(OH)}_2):
[ \text{H}^+ + \text{OH}^- \rightarrow \text{H}_2\text{O} ]
-
The remaining ions ((\text{Na}^+), (\text{Mg}^{2+}), (\text{SO}_4^{2-})) may form soluble salts not contributing to a solid matrix, and the primary result is water and some neutral salts, likely (\text{Na}_2\text{SO}_4) and (\text{MgSO}_4).
Expected Outcome of (\text{MgO}) and (\text{NaHSO}_4):
- The primary products from these reactions are (\text{Na}_2\text{SO}_4), (\text{MgSO}_4), and water.
- Since this mixture lacks the binding phases like struvite-K in the MPC system, it won't form a cohesive, stone-like material.
- The reaction is largely acid-base neutralization without the formation of significant structural binders.
Conclusion:
While magnesium oxide and mono-potassium phosphate react to form a strong, stone-like MPC material, the reaction between magnesium oxide and sodium bisulfate will not produce similar mechanical properties.
The magnesium phosphate cement is an established material with specific chemistry leading to a solid, durable product, while the mixture with sodium bisulfate results in neutralization and soluble salts without forming a hardened matrix comparable in strength or hardness.
To achieve a robust, stone-like material, the chemistry involved must enable the formation of solid structural phases, as seen in MPC but not in the magnesium oxide and sodium bisulfate mixture.
-
- User
I was told that magnesium oxide and metakaolin mixed in 50/50 weight/weight would form a strong substance , its not finished yet but it cracked . i wondered if i should use a different ration . i wonder if its too much magnesium oxide or its maybe just a bad idea in the fist place
- Assistant
The combination of magnesium oxide ((\text{MgO})) and metakaolin ((\text{Al}_2\text{O}_3 \cdot 2\text{SiO}_2)) to form a strong material is an interesting idea, as both components can contribute to different types of binding matrices. However, if the mixture is cracking, it suggests that the ratio or the combination may need to be adjusted, or that some important components might be missing. Let's explore the chemistry and provide some insights.
Understanding the Materials
-
Magnesium Oxide ((\text{MgO})):
- Reacts with water to form magnesium hydroxide ((\text{Mg(OH)}_2)), which can solidify but may not form a very strong matrix on its own.
- Often used with other components to create magnesium-based cements, like magnesium phosphate or magnesium silicate cements.
-
Metakaolin ((\text{Al}_2\text{O}_3 \cdot 2\text{SiO}_2)):
- A highly reactive pozzolanic material when mixed with alkaline activators, forms a geopolymer matrix by polymerizing alumino-silicate species.
Possible Reasons for Cracking:
-
Shrinkage:
- If there is too much water in the mix, excessive shrinkage upon drying can lead to cracking.
-
Inadequate Binding:
- Metakaolin may not adequately react with (\text{Mg(OH)}_2) alone to form a solid matrix. A chemical activator or an additional binder might be required to enhance binding.
-
Incompatible Expansion/Contraction Properties:
- Different thermal expansion or contraction properties of the two materials can lead to internal stresses and cracking.
Improving the Mixture:
-
Adjusting the Ratio:
- The 50/50 weight ratio might not be optimal. Experimenting with different ratios, like 60/40 or 40/60, might help find a better balance.
-
Adding an Activator:
- Consider adding an alkaline activator, such as a sodium or potassium-based compound, to promote geopolymerization of the metakaolin. Examples include sodium hydroxide ((\text{NaOH})) or potassium hydroxide ((\text{KOH})), combined with sodium silicate or potassium silicate solutions.
-
Reducing Water Content:
- Use the minimum amount of water necessary to achieve workability. Excessive water can lead to more shrinkage and weaker structures.
-
Curing Conditions:
- Proper curing conditions (controlled temperature and humidity) can significantly affect the final strength and integrity of the material. Slow, controlled curing helps to reduce internal stresses and cracking.
Alternative Bindings:
-
Magnesium Silicate Hydrate (M-S-H) Cement:
- M-S-H cements can be formed by careful reaction control of MgO with silica-rich materials in an alkaline environment, potentially using additional silicon sources.
-
Magnesium Phosphate Cement (MPC):
- Another possibility is to combine (\text{MgO}) with a phosphate source for rapid setting and hardening.
Example Mixes for Experimentation:
Here are a few mixes you might try:
- Mix 1: 60% (\text{MgO}), 40% Metakaolin, minimal water, and 10% sodium silicate solution.
- Mix 2: 40% (\text{MgO}), 60% Metakaolin, minimal water, and 10% sodium or potassium hydroxide solution.
- Mix 3: 50% (\text{MgO}), 50% Metakaolin, minimal water, with an additional 5% sodium carbonate ((\text{Na}_2\text{CO}_3)) as an activator.
Conclusion:
The combination of (\text{MgO}) and metakaolin has potential but may not inherently form a strong, crack-free material without proper ratio adjustments, activators, and curing conditions. Optimize the proportions, consider additives, and ensure controlled curing to achieve the desired results. Experimenting with different formulations, guided by the principles above, should help you find a more successful mixture.
-