Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-05-13· OpenAIAi2 WildChat-4.8M (AI2)

no permission do edit /sys/class/hwmon/hwmon2/pwm

  1. User

    no permission do edit /sys/class/hwmon/hwmon2/pwm

  2. Assistant

    If you are trying to edit a PWM (Pulse Width Modulation) control file under the /sys/class/hwmon directory and you are getting a "permission denied" error, it's likely due to the file's permissions or the necessity for elevated privileges (root access).

    Here are a few steps you can follow to address this:

    1. Check Permissions:

      • You can check the file permissions using the ls -l command. For example:
        ls -l /sys/class/hwmon/hwmon2/pwm
        
      • This will give you a detailed listing of the file's permissions. Most likely, the file is only writable by the root user.
    2. Use Elevated Privileges:

      • If only the root user has write permission, you can use sudo to edit the file. Here's how you might do it:
        sudo sh -c 'echo "value" > /sys/class/hwmon/hwmon2/pwm'
        
        Replace "value" with the actual value you want to write to the file.
    3. Switch to Root User:

      • If you need to make multiple changes and using sudo for every command is cumbersome, you can switch to the root user:
        sudo -i
        
      • Then you can execute commands directly as the root user.
    4. Using echo with sudo:

      • Sometimes using echo with sudo directly might not work due to the way shell redirection works. Instead, you can use tee as follows:
        echo "value" | sudo tee /sys/class/hwmon/hwmon2/pwm
        
    5. Permission Change (Not Recommended):

      • You might be tempted to change the file's permissions to make it writable by a non-root user. This is generally not recommended as it can pose security risks. If you must do it (do so at your own risk), you can change permissions:
        sudo chmod 666 /sys/class/hwmon/hwmon2/pwm
        
      • Ensure you revert the permissions back after making necessary changes:
        sudo chmod 644 /sys/class/hwmon/hwmon2/pwm
        

    Here's an example of using sudo to write a value to the PWM file:

    sudo sh -c 'echo 255 > /sys/class/hwmon/hwmon2/pwm1'
    

    This command writes the value 255 to the pwm1 file under hwmon2.

    Note: Be very cautious when manipulating hardware control files directly, as incorrect values might cause hardware damage or system instability. Always ensure you understand the implications of the changes you are making.

  3. User

    how to change fan speed for hwmon2/pwm1

  4. Assistant

    To change the fan speed by writing to the appropriate PWM file under hwmon, you'll typically need root privileges, as mentioned previously. Here are some detailed steps on how to do this safely:

    Steps to Change Fan Speed:

    1. Identify the correct hwmon device:

      • First, you need to make sure hwmon2 corresponds to the device whose fan speed you want to control. Check the contents of the name file in the directory:
        cat /sys/class/hwmon/hwmon2/name
        
        Make sure it matches your hardware.
    2. Understand the PWM range:

      • Generally, PWM values range from 0 (fan off) to 255 (fan at full speed). You should check the documentation for your specific hardware to be sure.
    3. Check current PWM value:

      • Before making any changes, it could be helpful to see the current PWM value:
        cat /sys/class/hwmon/hwmon2/pwm1
        
    4. Write the new PWM value:

      • Use sudo to set a new duty cycle. For example, to set the fan speed to 50% (assuming a range of 0 to 255, 50% would be 127):
        echo 127 | sudo tee /sys/class/hwmon/hwmon2/pwm1
        

    Example Commands:

    To set the fan speed to different levels, you can use the following commands:

    • Set Fan to 25% Speed:

      echo 64 | sudo tee /sys/class/hwmon/hwmon2/pwm1
      
    • Set Fan to 50% Speed:

      echo 127 | sudo tee /sys/class/hwmon/hwmon2/pwm1
      
    • Set Fan to 75% Speed:

      echo 191 | sudo tee /sys/class/hwmon/hwmon2/pwm1
      
    • Set Fan to Maximum Speed:

      echo 255 | sudo tee /sys/class/hwmon/hwmon2/pwm1
      

    Important Considerations:

    • Verify the Capability: Make sure your hardware supports manual control of fan speeds. Some systems might have BIOS/UEFI settings that override your manual control settings.

    • Revert Changes if Necessary: If something goes wrong, you might want to reboot your system or revert any manual changes to default PWM values.

    • Safety Measures: Be careful with the values you set. Setting the PWM value too low (beyond the capability of the fan to spin properly) can cause overheating issues. Always monitor system temperatures when making such changes.

    Troubleshooting:

    • Permission Issues: If you encounter permission denied errors:

      sudo sh -c 'echo 127 > /sys/class/hwmon/hwmon2/pwm1'
      
    • Value Not Changing: If the value doesn't seem to change, the BIOS/UEFI or another system control might be overriding manual settings.

    Changing hardware settings directly can be risky, so proceed with caution and always ensure you have proper cooling to avoid overheating.

  5. User

    resource busy

  6. Assistant

    The "resource busy" error typically indicates that the resource you are trying to control is currently being managed by another process or system service. In the case of fan control, it could be that a hardware monitoring daemon or the system firmware is managing the fan speeds automatically, and it is locking the resource.

    Here are some steps you can take to address this issue:

    1. Identify Which Process is Using the Resource

    You can use tools like lsof (list open files) to find out which process is currently using the resource:

    sudo lsof /sys/class/hwmon/hwmon2/pwm1
    

    This will list any processes that have the file open.

    2. Stop Conflicting Services

    If a hardware monitoring daemon like lm_sensors, fancontrol, or a motherboard-specific control utility is managing the fans, you will need to stop those services:

    Stop fancontrol Service

    sudo systemctl stop fancontrol
    

    Stop lm_sensors Service

    sudo systemctl stop lm_sensors
    

    Check for Other Services

    Check for other related services that might be running:

    sudo systemctl list-units | grep -i fan
    sudo systemctl list-units | grep -i sensor
    

    Stop any services that might be managing the fans.

    3. Disable BIOS/UEFI Automatic Fan Control

    Some systems have fan control settings in the BIOS/UEFI that can override software settings. You may need to:

    1. Reboot your system.
    2. Enter the BIOS/UEFI settings menu.
    3. Look for fan control settings and set them to manual or disable the automatic control.

    4. Use a Dedicated Tool for Your Hardware

    Sometimes, tools specific to your hardware (like ones provided by the motherboard or system manufacturer) can control fan speeds. Check if there's a Linux utility available for your specific hardware.

    5. Reattempt to Change Fan Speed

    After stopping any conflicting services and ensuring no other processes are locking the resource, try changing the fan speed again:

    echo 127 | sudo tee /sys/class/hwmon/hwmon2/pwm1
    

    Example Workflow

    Here's a possible sequence of steps you might perform:

    1. Identify the conflicting process:

      sudo lsof /sys/class/hwmon/hwmon2/pwm1
      
    2. Stop the conflicting service (if found):

      sudo systemctl stop <service_name>
      
    3. Attempt to set the fan speed:

      echo 127 | sudo tee /sys/class/hwmon/hwmon2/pwm1
      

    Alternatives

    If you're unable to gain control via the command line due to persistent conflicts, consider using graphical or manufacturer-specific tools that may provide more integrated control:

    • Fancontrol GUI: A graphical front-end for fancontrol.
    • Motherboard-specific software: Some manufacturers provide tools like ASUS Fan Xpert, Gigabyte EasyTune, etc., that might have Linux versions or equivalents.

    Final Notes

    Always be cautious when modifying hardware control settings to avoid potential damage or system instability. If you're unsure, consult your hardware's documentation or seek assistance from the manufacturer's support resources.

  7. User

    ubuntu restart fancontrol

  8. Assistant

    To restart the fancontrol service on an Ubuntu system, you can use the systemctl command. Here's how you can do it:

    Step-by-Step:

    1. Stop the fancontrol service:

      sudo systemctl stop fancontrol
      
    2. Start the fancontrol service:

      sudo systemctl start fancontrol
      
    3. Restart the fancontrol service:

      If you need to restart the service directly, you can do so with:

      sudo systemctl restart fancontrol
      
    4. Check the status of the fancontrol service:

      To confirm that the service is running correctly:

      sudo systemctl status fancontrol
      

      This command provides details about the current status of the service, including any errors or issues that might have occurred.

    Configuring fancontrol

    If the fancontrol service is not set up correctly, you might need to configure it. Here's a quick guide:

    1. Install the necessary packages:

      If you haven't already installed lm-sensors and fancontrol, you can do so with:

      sudo apt update
      sudo apt install lm-sensors fancontrol
      
    2. Run the sensors detection script:

      The sensors-detect script will scan your hardware for compatible sensors:

      sudo sensors-detect
      

      Follow the prompts to detect all possible sensors. This step is crucial for fancontrol to work correctly.

    3. Configure fancontrol:

      The pwmconfig script will help you configure the fancontrol settings:

      sudo pwmconfig
      

      Follow the prompts to set up the appropriate PWM controls for your fans. This will generate a configuration file typically located at /etc/fancontrol.

    4. Test the configuration:

      You can test the fan control settings manually:

      sudo fancontrol
      

      Ensure the fans behave as expected under different temperature conditions.

    5. Enable the fancontrol service to start at boot:

      If you want the fancontrol service to start automatically whenever you boot your system:

      sudo systemctl enable fancontrol
      

    Example Commands

    Here's a sequence of commands that summarize the steps for configuring and managing the fancontrol service:

    # Install necessary packages
    sudo apt update
    sudo apt install lm-sensors fancontrol
    
    # Detect sensors
    sudo sensors-detect
    
    # Configure fan control
    sudo pwmconfig
    
    # Test fan control settings
    sudo fancontrol
    
    # Stop, start, and restart fancontrol service
    sudo systemctl stop fancontrol
    sudo systemctl start fancontrol
    sudo systemctl restart fancontrol
    
    # Enable fancontrol service on boot
    sudo systemctl enable fancontrol
    
    # Check fancontrol status
    sudo systemctl status fancontrol
    

    Troubleshooting

    • If the fancontrol service fails to start or restart, check the log files for errors. You can view logs using the journalctl command:

      sudo journalctl -u fancontrol
      
    • Make sure your /etc/fancontrol configuration file is correctly set up. Sometimes re-running pwmconfig can help resolve configuration issues.

    • Ensure you have correct permissions to access the hardware monitoring files. Running commands with sudo should generally suffice.

    By following these steps, you should be able to manage and restart the fancontrol service on an Ubuntu system, ensuring you have proper control over your fan speeds.