Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-2024-05-13· OpenAIAi2 WildChat-4.8M (AI2)

setup novnc on ubuntu with x11vnc

  1. User

    setup novnc on ubuntu with x11vnc

  2. Assistant

    To set up noVNC with x11vnc on Ubuntu, you'll need to follow a few steps which include installing necessary packages, configuring x11vnc, and setting up the noVNC service. Here's a step-by-step guide:

    1. Update your system:

      sudo apt update
      sudo apt upgrade -y
      
    2. Install Desktop Environment (if not already installed): If you're setting this up on a server without a graphical user interface, you'll need to install one. For example, you could install the lightweight Xfce desktop:

      sudo apt install xfce4 xfce4-goodies -y
      
    3. Install x11vnc:

      sudo apt install x11vnc -y
      
    4. Set a password for x11vnc:

      x11vnc -storepasswd
      
    5. Create a service for x11vnc: Create a new service file for x11vnc:

      sudo nano /etc/systemd/system/x11vnc.service
      

      Paste the following configuration into the file:

      [Unit]
      Description=Start x11vnc at startup.
      After=multi-user.target
      
      [Service]
      Type=simple
      ExecStart=/usr/bin/x11vnc -forever -usepw -display :0 -rfbport 5900
      ExecStop=/usr/bin/killall x11vnc
      
      [Install]
      WantedBy=multi-user.target
      

      Save and close the file.

    6. Start and enable the x11vnc service:

      sudo systemctl daemon-reload
      sudo systemctl enable x11vnc.service
      sudo systemctl start x11vnc.service
      
    7. Install noVNC:

      • First, install necessary dependencies:

        sudo apt install git python3 python3-pip -y
        
      • Clone the noVNC repository and WebSockets proxy:

        cd /opt
        sudo git clone https://github.com/novnc/noVNC.git
        sudo git clone https://github.com/novnc/websockify
        
      • Install WebSockets Proxy dependencies:

        cd /opt/websockify
        sudo python3 setup.py install
        
    8. Create a service for noVNC: Create a new service file for noVNC:

      sudo nano /etc/systemd/system/novnc.service
      

      Paste the following configuration into the file:

      [Unit]
      Description=noVNC Service
      After=network.target
      
      [Service]
      ExecStart=/usr/bin/python3 /opt/noVNC/utils/novnc_proxy --vnc localhost:5900
      Restart=always
      User=nobody
      
      [Install]
      WantedBy=multi-user.target
      

      Save and close the file.

    9. Start and enable the noVNC service:

      sudo systemctl daemon-reload
      sudo systemctl enable novnc.service
      sudo systemctl start novnc.service
      
    10. Accessing noVNC: Open a web browser and go to:

    http://your_server_ip:6080/vnc.html
    

    You'll need to enter the password you set earlier for x11vnc.

    Now you should have a working VNC server accessible via a web browser using noVNC and x11vnc on your Ubuntu system.

  3. User

    i have noVNC and x11vnc server running on my ubuntu. i can access my noVNC webpage, but when i click on the connect button, it said fail to connect to server

  4. Assistant

    If you are receiving a "fail to connect to server" message when you attempt to connect through the noVNC webpage, it could be due to several reasons. Let's go through a series of troubleshooting steps to identify and resolve the issue:

    1. Check x11vnc Service Status: Ensure that the x11vnc service is running and not experiencing any issues.

      sudo systemctl status x11vnc.service
      
    2. Check noVNC Service Status: Similarly, check the status of the noVNC service.

      sudo systemctl status novnc.service
      
    3. Verify VNC Port: Ensure that x11vnc is listening on the correct port (default is 5900). You can check this using:

      sudo netstat -tuln | grep 5900
      
    4. Check noVNC and WebSocket Proxy Configuration: Ensure noVNC is properly connecting to the x11vnc server. Look at the service file for noVNC:

      ExecStart=/usr/bin/python3 /opt/noVNC/utils/novnc_proxy --vnc localhost:5900
      

      This tells noVNC to connect to x11vnc on localhost:5900.

    5. Firewall Configuration: Ensure that the necessary ports are open in your firewall. For example, if you are using ufw, you can open the ports as follows:

      sudo ufw allow 5900
      sudo ufw allow 6080
      
    6. Check Logs for Errors: Examine the logs for both x11vnc and noVNC to look for any errors or warnings.

      • For x11vnc:

        sudo journalctl -u x11vnc.service
        
      • For noVNC:

        sudo journalctl -u novnc.service
        
    7. Test Direct VNC Connection: Try connecting to the VNC server directly using a VNC client (like vinagre, vncviewer, or Remmina). This will help determine if the issue is with x11vnc or the WebSocket proxy/noVNC configuration.

      vinagre localhost:5900
      
    8. Ensure X11 Display is Up: Verify that the X11 display is running properly and is accessible at :0. You can check running sessions with:

      who
      

      If it shows a graphical session running, it should list :0.

    9. Reconfigure and Restart Services: If everything seems correct but still does not work, try stopping and starting the services again.

      sudo systemctl restart x11vnc.service
      sudo systemctl restart novnc.service
      
    10. Manual noVNC Startup for Debugging: Run the noVNC proxy manually for debugging purposes. Stop the novnc.service:

      sudo systemctl stop novnc.service
      

      Then run it manually:

      /usr/bin/python3 /opt/noVNC/utils/novnc_proxy --vnc localhost:5900 --listen 6080 --verbose
      

      This will give you detailed output and may help identify what's going wrong during the connection attempt.

    Common Issues & Solutions:

    • Wrong VNC Server Address or Port: Make sure noVNC is trying to connect to the correct address and port of your VNC server.
    • Service Start Delays: Sometimes services take time to start up, and a quick restart might fix transient issues.
    • X11 Session Not Active: Ensure there's an active X session; if there are no logged-in GUI sessions, x11vnc might not have anything to present.

    By following these steps, you should be able to diagnose and resolve the issue preventing noVNC from connecting to the server.

  5. User

    setup novnc on ubuntu with x11vnc and websockify

  6. Assistant

    Sure, setting up noVNC with x11vnc and websockify on Ubuntu involves several steps. Let's go through each step in detail to ensure a successful setup:

    Step 1: Install Necessary Packages

    First, ensure your system is up to date and install the required packages:

    sudo apt update
    sudo apt upgrade -y
    sudo apt install x11vnc python3 python3-pip git -y
    

    Step 2: Set a VNC Password for x11vnc

    Set a password for the VNC connection to ensure security:

    x11vnc -storepasswd
    

    Follow the prompts to set and confirm your password.

    Step 3: Create x11vnc Service

    Create a systemd service file for x11vnc:

    sudo nano /etc/systemd/system/x11vnc.service
    

    Paste the following configuration into the file:

    [Unit]
    Description=Start x11vnc at startup.
    After=multi-user.target
    
    [Service]
    Type=simple
    ExecStart=/usr/bin/x11vnc -forever -usepw -display :0 -rfbport 5900
    ExecStop=/usr/bin/killall x11vnc
    Restart=on-failure
    
    [Install]
    WantedBy=multi-user.target
    

    Save and close the file.

    Step 4: Enable and Start x11vnc Service

    Enable and start the x11vnc service:

    sudo systemctl daemon-reload
    sudo systemctl enable x11vnc.service
    sudo systemctl start x11vnc.service
    

    Step 5: Install noVNC and websockify

    Clone the noVNC and websockify repositories and install necessary dependencies:

    cd /opt
    sudo git clone https://github.com/novnc/noVNC.git
    sudo git clone https://github.com/novnc/websockify
    

    Step 6: Install websockify

    Install websockify:

    cd /opt/websockify
    sudo python3 setup.py install
    

    Step 7: Create noVNC Service

    Create a systemd service file for noVNC:

    sudo nano /etc/systemd/system/novnc.service
    

    Paste the following configuration into the file:

    [Unit]
    Description=noVNC Service
    After=network.target x11vnc.service
    
    [Service]
    ExecStart=/usr/bin/python3 /opt/noVNC/utils/novnc_proxy --vnc localhost:5900 --listen 6080
    Restart=always
    User=nobody
    
    [Install]
    WantedBy=multi-user.target
    

    Save and close the file.

    Step 8: Enable and Start noVNC Service

    Enable and start the noVNC service:

    sudo systemctl daemon-reload
    sudo systemctl enable novnc.service
    sudo systemctl start novnc.service
    

    Step 9: Open Necessary Ports

    Ensure the necessary ports are open in your firewall. For example, if you are using ufw:

    sudo ufw allow 5900
    sudo ufw allow 6080
    

    Step 10: Access noVNC Web Interface

    Open a web browser and navigate to:

    http://your_server_ip:6080/vnc.html
    

    Enter the password you set earlier for x11vnc.

    Troubleshooting Tips

    If you encounter issues, check the logs for both x11vnc and noVNC:

    • For x11vnc:

      sudo journalctl -u x11vnc.service
      
    • For noVNC:

      sudo journalctl -u novnc.service
      

    Additionally, verify that the services are running and listening on the correct ports:

    • Verify x11vnc is running:

      sudo systemctl status x11vnc.service
      
    • Verify noVNC is running:

      sudo systemctl status novnc.service
      
    • Confirm ports are listening:

      sudo netstat -tuln | grep 5900
      sudo netstat -tuln | grep 6080
      

    Following these steps should help you set up a functioning noVNC instance using x11vnc and websockify on Ubuntu.