/obj/machinery/atmospherics/pipe/simple/heatexchanging icon = 'icons/atmos/heat.dmi'…
- User
/obj/machinery/atmospherics/pipe/simple/heat_exchanging icon = 'icons/atmos/heat.dmi' icon_state = "intact" pipe_icon = "hepipe" color = "#404040" undertile = TRUE connect_types = CONNECT_TYPE_HE var/icon_temperature = T20C //stop small changes in temperature causing an icon refresh
minimum_temperature_difference = 20 thermal_conductivity = OPEN_HEAT_TRANSFER_COEFFICIENT maximum_pressure = 360 * ONE_ATMOSPHERE fatigue_pressure = 300 * ONE_ATMOSPHERE alert_pressure = 360 * ONE_ATMOSPHERE can_buckle = 1 buckle_lying = 1/obj/machinery/atmospherics/pipe/simple/heat_exchanging/atom_init() . = ..() color = "#404040" //we don't make use of the fancy overlay system for colours, use this to set the default.
/obj/machinery/atmospherics/pipe/simple/heat_exchanging/atmos_init() normalize_dir() ..()
/obj/machinery/atmospherics/pipe/simple/heat_exchanging/can_be_node(obj/machinery/atmospherics/pipe/simple/heat_exchanging/target) if(istype(target, /obj/machinery/atmospherics/pipe/simple/heat_exchanging) && ..()) return TRUE
/obj/machinery/atmospherics/pipe/simple/heat_exchanging/process_atmos() last_power_draw = 0 last_flow_rate = 0
var/datum/gas_mixture/pipe_air = return_air() var/turf/local_turf = loc var/environment_temperature if(istype(loc, /turf/simulated) && !local_turf.blocks_air) var/datum/gas_mixture/environment = loc.return_air() environment_temperature = environment.temperature else environment_temperature = local_turf.temperature if(abs(environment_temperature-pipe_air.temperature) > minimum_temperature_difference) parent.temperature_interact(loc, volume, thermal_conductivity) if(buckled_mob) var/hc = pipe_air.heat_capacity() var/avg_temp = (pipe_air.temperature * hc + buckled_mob.bodytemperature * 3500) / (hc + 3500) pipe_air.temperature = avg_temp buckled_mob.bodytemperature = avg_temp/obj/machinery/atmospherics/pipe/simple/heat_exchanging/process() if(!parent) return //machines subsystem fires before atmos is initialized so this prevents race condition runtimes
var/datum/gas_mixture/pipe_air = return_air() set_light(0, 0, null) //fancy radiation glowing if(pipe_air.temperature && (icon_temperature > 500 || pipe_air.temperature > 500)) //start glowing at 500K if(abs(pipe_air.temperature - icon_temperature) > 10) icon_temperature = pipe_air.temperature var/h_r = heat2color_r(icon_temperature) var/h_g = heat2color_g(icon_temperature) var/h_b = heat2color_b(icon_temperature) if(icon_temperature < 2000) //scale up overlay until 2000K var/scale = (icon_temperature - 500) / 1500 h_r = 64 + (h_r - 64) * scale h_g = 64 + (h_g - 64) * scale h_b = 64 + (h_b - 64) * scale animate(src, color = rgb(h_r, h_g, h_b), time = 20, easing = SINE_EASING) set_light(1, clamp(pipe_air.temperature * 0.03, 0, 30), rgb(h_r, h_g, h_b)) if(buckled_mob) var/heat_limit = 1000 var/mob/living/carbon/human/H = buckled_mob if(istype(H) && H.species) heat_limit = H.species.heat_level_3 if(pipe_air.temperature > heat_limit + 1) buckled_mob.apply_damage(4 * log(pipe_air.temperature - heat_limit), BURN, BP_CHEST, used_weapon = "Excessive Heat")как посчитать наскок одна труба охлаждает
- Assistant
Чтобы посчитать, насколько одна труба охлаждает, нам нужно понять несколько аспектов:
- На сколько упала температура газа в трубе.
- На сколько упала температура окружающей среды около трубы.
Для этого можно использовать код и механизмы расчетов, встроенные в описанный вами объект.
-
Температура газа в трубе:
- В методе
process_atmos()температура газа в трубе корректируется в зависимости от среды. - Функция
parent.temperature_interact(loc, volume, thermal_conductivity)отвечает за тепловое взаимодействие между трубой и окружающей средой.
- В методе
-
Окончательное тепловое взаимодействие:
- Вы можете посмотреть на метод
temperature_interact()родительского объекта, чтобы понять, как рассчитывается изменение температуры.
- Вы можете посмотреть на метод
Пример простого расчетного цикла:
- Получаем текущую температуру газа в трубе.
- Получаем температуру окружающей среды.
- Рассчитываем изменение температуры после некоторого времени работы трубы.
Пример кода, который можно использовать для вывода этих значений:
/obj/machinery/atmospherics/pipe/simple/heat_exchanging/calculate_cooling_effect() var/datum/gas_mixture/pipe_air = return_air() var/turf/local_turf = loc var/environment_temperature = local_turf.temperature var/initial_temperature_diff = abs(environment_temperature - pipe_air.temperature) // Принудительное обновление температуры газа и среды через функции взаимодействия process_atmos() var/new_temperature_diff = abs(environment_temperature - pipe_air.temperature) // Подсчет изменения температуры var/temperature_change = initial_temperature_diff - new_temperature_diff return temperature_change /obj/machinery/atmospherics/pipe/simple/heat_exchanging/process() if(!parent) return //machines subsystem fires before atmos is initialized so this prevents race condition runtimes // Ваш обычный код процесса... . = ..() // Добавьте это в конец процесса, или вызовите где-то еще var/temperature_effect = calculate_cooling_effect() world.log << "Эффект охлаждения трубы: [temperature_effect]K"Этот метод
calculate_cooling_effectизвлекает первоначальную разницу температур между трубой и окрестностями, вызывает функцию теплового взаимодействия, а затем снова проверяет разницу температур для оценки эффекта охлаждения.Этот подход поможет вам прямо в коде понять, насколько эффективно труба охлаждает окружающую среду.