разгруппируй переменные на большее количество групп. основные переменные, т. е. те из…
- User
разгруппируй переменные на большее количество групп. основные переменные, т. е. те из которых можно вычислить остальные; дублирующиеся переменные; и так далее…
– Vehicle Controls
local horn – 0 or 1 - Indicates the horn is active. local parkingbrake – 0 to 1 - Parking brake input local parkingbrake_input – 0 to 1 - Parking brake input local reverse_gear – 0 or 1 - Indicates a reverse gear is selected. local steering – Degrees - Angle of the steering wheel. local steering_input – 1 to 1 - Steering input percentage. local throttle_input – 0 to 1 - Throttle input percentage.
– Lights
local brakelight_signal_R – 0 or 1 - Combines the brake electrics with the signal_R electric. Lights up if either of those are on. Used for american style indicator/lights. local brakelight_signal_L – 0 or 1 - Combines the brake electrics with the signal_L electric. Lights up if either of those are on. Used for american style indicator/lights. local fog – 0 or 1 - Indicates the foglights are turned on. local hazard – 0 or 1 - Flashing function when hazards are on. local hazard_enabled – 0 or 1 - Indicates the hazards have been turned on local highbeam – 0 or 1 - Tells if the high beams are turned on. local lightbar – number - Indicates the current lightbar mode local lights – number - Index of the current light mode (0 is off, 1 is lowbeams, 2 is highbeams) local lights_state – number - Index of the current light mode (0 is off, 1 is lowbeams, 2 is highbeams) local lowbeam – 0 or 1 - Tells if the low beams are turned on. local lowhighbeam – 0 or 1 - Tells if either the low or high beams are turned on. local lowhighbeam_signal_R – 0 or 1 - Combines the lowhighbeam electrics with the signal_R electric. Lights up if either of those are on. Used for american style indicator/lights. local lowhighbeam_signal_L – 0 or 1 - Combines the lowhighbeam electrics with the signal_L electric. Lights up if either of those are on. Used for american style indicator/lights. local parking – 0 to 1 - Currently unused local reverse_gear – 0 or 1 - Indicates a reverse gear is selected. local signal_L – 0 or 1 - Flashes if the left turn signal or hazards are turned on. local signal_R – 0 or 1 - Flashes if the right turn signal or hazards are turned on. local signal_left_input – 0 or 1 - Indicates the left indicator is selected. local signal_right_input – 0 or 1 - Indicates the right indicator is selected. local turnsignal – 0, 1 or -1 - Varies depending on which turn signal is selected (right is 1, left is -1)
– Vehicle Status
local airspeed – m/s - Speed of the vehicle compared to the world. local airflowspeed – m/s - Speed of the vehicle compared to the airflow, taking into account wind. local altitude – meters - Altitude of the vehicle local lowpressure – 0 or 1 - Indicates a tire is deflated local oil – 0 or 1 - Indicates the oil temperature is greater than 130°C local rpmTacho – rpm - Smoothed engine speed value for use with tachometers local rpmSpin – Degrees - Spin function based on engine RPM. Used for spinning pulley props. local wheelspeed – m/s - Speed of the car measured at the wheels.
- Assistant
Группировки переменных:
- Основные переменные:
- airspeed
- airflowspeed
- altitude
- lowpressure
- oil
- rpmTacho
- rpmSpin
- wheelspeed
- Vehicle Controls:
- horn
- parkingbrake
- parkingbrake_input
- reverse_gear
- steering
- steering_input
- throttle_input
- Lights:
- brakelight_signal_R
- brakelight_signal_L
- fog
- hazard
- hazard_enabled
- highbeam
- lightbar
- lights
- lights_state
- lowbeam
- lowhighbeam
- lowhighbeam_signal_R
- lowhighbeam_signal_L
- parking
- reverse_gear
- signal_L
- signal_R
- signal_left_input
- signal_right_input
- turnsignal
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.