-- This Source Code Form is subject to the terms of the bCDDL, v. 1.1. -- If a copy of…
- User
-- This Source Code Form is subject to the terms of the bCDDL, v. 1.1. -- If a copy of the bCDDL was not distributed with this -- file, You can obtain one at http://beamng.com/bCDDL-1.1.txt
local M = {} local ceil = math.ceil local min = math.min local max = math.max
M.values = { throttle = 0, brake = 0, steering = 0, clutch = 0, wheelspeed = 0, odometer = 0, avgWheelAV = 0, airspeed = 0, horn = false, rpmspin = 0, rpm = 0, boost = 0, boostMax = 0 }
M.disabledState = {}
local smoothers = { wheelspeed = newExponentialSmoothing(10), gear_A = newExponentialSmoothing(10), --gear_M = newExponentialSmoothing(10), rpm = newExponentialSmoothing(10), lights = newExponentialSmoothing(10), fuel = newExponentialSmoothing(100), oiltemp = newExponentialSmoothing(100), watertemp = newExponentialSmoothing(100), turnsignal = newExponentialSmoothing(10), airspeed = newExponentialSmoothing(10), airflowspeed = newExponentialSmoothing(10), altitude = newExponentialSmoothing(10) }
local rpmSmoother = newTemporalSigmoidSmoothing(50000, 75000, 50000, 75000, 0)
local lightsState = 0 local lightsSavedState = 0
local signalRightState = false local signalLeftState = false local signalWarnState = false local lightbarState = 0 local hornState = false
local fogLightsState = false
local blinkPulse = false local blinkTimerThreshold = 0.4 local blinkTimer = 0
-- sounds local hornSound1 local hornSound2 local sirenSound local indStartSnd local indStopSnd local indLoopSnd1 local indLoopSnd2 local lightOn local lightOff local hasSteered = false -- used to see whether right/left-turn has been finished
-- set to nop in the beginning - this avoids conflict with the warn signal local automatic_indicator_stop = nop local generateBlinkPulse = nop
local ignitionLevelSanitization local previousIgnitionLevel local updateElectricsWithIgnitionLevel --used to alter the electrics output based on ignition state, made to support multiple different countries/regulations local ignitionHoldingStarter = false local ignitionHoldingStarterTimer = 0 local ignitionWasStartingEngine = false local ignitionMessageLookup = { [0] = "ui.common.vehicleOff", [1] = "ui.common.vehicleAccessoryOn", [2] = "ui.common.vehicleOn" }
local function generateBlinkPulseFun(dt) blinkTimer = blinkTimer + dt if blinkTimer > blinkTimerThreshold then if blinkPulse then indLoopSnd1 = indLoopSnd1 or sounds.createSoundscapeSound("indLoop1") sounds.playSoundSkipAI(indLoopSnd1) else indLoopSnd2 = indLoopSnd2 or sounds.createSoundscapeSound("indLoop2") sounds.playSoundSkipAI(indLoopSnd2) end blinkPulse = not blinkPulse blinkTimer = 0 end end
local function updateSignals() generateBlinkPulse = (signalLeftState or signalRightState) and generateBlinkPulseFun or nop end
-- stops automatically indicator if turn has been finished or if wheel is steered in opposite direction local function manage_automatic_indicator_stop() local controlPoint = 100 local steering = M.values.steering if steering == nil then return end
--check whether user has steered in the desired direction if signalLeftState and steering > controlPoint then hasSteered = true elseif signalRightState and steering < -controlPoint then hasSteered = true end
--if the wheel has returned to the neutral position, turn indicator off if signalLeftState and hasSteered and steering <= 0 then signalLeftState = false hasSteered = false sounds.playSoundSkipAI(indStopSnd) automatic_indicator_stop = nop elseif signalRightState and hasSteered and steering >= 0 then signalRightState = false hasSteered = false sounds.playSoundSkipAI(indStopSnd) automatic_indicator_stop = nop end
updateSignals() end
local function stop_turn_signal() if not signalWarnState then if signalLeftState or signalRightState then signalLeftState = false signalRightState = false hasSteered = false sounds.playSoundSkipAI(indStopSnd) automatic_indicator_stop = nop end
updateSignals()end end
-- user input functions local function toggle_left_signal() if not signalWarnState then signalLeftState = not signalLeftState else signalLeftState = true end if signalLeftState then signalRightState = false signalWarnState = false indStartSnd = indStartSnd or sounds.createSoundscapeSound("indicatorStart") sounds.playSoundSkipAI(indStartSnd) automatic_indicator_stop = manage_automatic_indicator_stop indStopSnd = indStopSnd or sounds.createSoundscapeSound("indicatorStop") end if not signalLeftState then sounds.playSoundSkipAI(indStopSnd) automatic_indicator_stop = nop hasSteered = false end
updateSignals() end
local function toggle_right_signal() if not signalWarnState then signalRightState = not signalRightState else signalRightState = true end if signalRightState then signalLeftState = false signalWarnState = false indStartSnd = indStartSnd or sounds.createSoundscapeSound("indicatorStart") sounds.playSoundSkipAI(indStartSnd) automatic_indicator_stop = manage_automatic_indicator_stop indStopSnd = indStopSnd or sounds.createSoundscapeSound("indicatorStop") end if not signalRightState then automatic_indicator_stop = nop sounds.playSoundSkipAI(indStopSnd) hasSteered = false end
updateSignals() end
local function toggleSound(val, snd) if not snd then return end if val then obj:setVolume(snd, 1) obj:playSFX(snd) else obj:stopSFX(snd) end end
local function updateIgnitionStarter(dt) if ignitionHoldingStarter then ignitionHoldingStarterTimer = ignitionHoldingStarterTimer + dt if ignitionHoldingStarterTimer > 0.5 then if not ignitionWasStartingEngine then ignitionWasStartingEngine = true M.setIgnitionLevel(3) end else ignitionWasStartingEngine = false end else ignitionHoldingStarterTimer = 0 end end
local function updateGFX(dt) updateIgnitionStarter(dt) generateBlinkPulse(dt)
local vals = M.values -- the primary source values
automatic_indicator_stop()
vals.accXSmooth = sensors.gx2 vals.accYSmooth = sensors.gy2 vals.accZSmooth = sensors.gz2
vals.odometer = partCondition.getRootPartOdometerValue() vals.trip = partCondition.getRootPartTripValue()
vals.brakelights = nil vals.nop = 0 --nop electrics for not yet working things vals.parkingbrake = vals.parkingbrake_input vals.parkingbrakelight = vals.parkingbrake > 0 vals.lights = lightsState vals.lights_state = lightsState if signalWarnState then vals.turnsignal = 0 elseif signalRightState then vals.turnsignal = 1 elseif signalLeftState then vals.turnsignal = -1 else vals.turnsignal = 0 end
vals.airspeed = obj:getGroundSpeed() vals.airflowspeed = obj:getAirflowSpeed() vals.altitude = obj:getAltitude() vals.parking = 0 -- TODO: input.parkinglights vals.reverse = (vals.gearIndex or 0) < 0
-- and then the derived values vals.signal_L = vals.signal_left_input == 1 and blinkPulse vals.signal_R = vals.signal_right_input == 1 and blinkPulse
vals.hazard = (signalWarnState and blinkPulse) vals.hazard_enabled = signalWarnState vals.lightbar = lightbarState vals.lowpressure = (beamstate.lowpressure) vals.oil = (vals.oiltemp or 0) >= 130 vals.lowhighbeam = (lightsState == 1 or lightsState == 2) vals.lowbeam = (lightsState == 1) vals.highbeam = (lightsState == 2) vals.fog = fogLightsState vals.horn = hornState
--mixed values for american style indicators/lights vals.lowhighbeam_signal_R = vals.signal_right_input == 1 and (blinkPulse and 1 or 0) or ceil(vals.lowhighbeam and 1 or 0) vals.lowhighbeam_signal_L = vals.signal_left_input == 1 and (blinkPulse and 1 or 0) or ceil(vals.lowhighbeam and 1 or 0) --wigwag lights --desired behavior: highbeam is controlled by normal highbeam values if lightbar is OFF --if it's on, only the wigwag signal has control over the highbeam local lightbarActive = vals.lightbar > 0 local wigwagRActive = vals.wigwag_R == 1 local wigwagLActive = vals.wigwag_L == 1 local highbeamActive = vals.highbeam vals.highbeam_wigwag_R = ((highbeamActive and not lightbarActive) or (wigwagRActive)) and 1 or 0 vals.highbeam_wigwag_L = ((highbeamActive and not lightbarActive) or (wigwagLActive)) and 1 or 0 vals.reverse_wigwag_R = vals.wigwag_R == 1 or ceil(vals.reverse and 1 or 0) vals.reverse_wigwag_L = vals.wigwag_L == 1 or ceil(vals.reverse and 1 or 0)
local rpm = vals.rpm vals.rpmTacho = rpmSmoother:get(rpm, dt) vals.rpmspin = (vals.rpmspin + dt * rpm * 6) % 360 --make sure to convert properly between the units here
vals.signal_right_input = (signalRightState) vals.signal_left_input = (signalLeftState)
vals.boost = (vals.turboBoost or 0) + (vals.superchargerBoost or 0) vals.boostMax = max((vals.turboBoostMax or 0), (vals.superchargerBoostMax or 0))
-- inject imported electrics events first time, this needs to happen twice overall so that code between gfx first step and gfx second step can see these updated electrics beamstate.updateRemoteElectrics(true)
for f, v in pairs(vals) do if M.disabledState[f] ~= nil then vals[f] = nil else if type(v) == "boolean" then vals[f] = vals[f] and 1 or 0 end end end
for f, s in pairs(smoothers) do if vals[f] ~= nil then vals[f] = s:get(vals[f]) end end end
local function updateGFXSecondStep(dt) local values = M.values --make sure to update the brakelights value based on the brake value values.brakelights = values.brakelights or ceil(values.brake) values.brakelight_signal_R = values.signal_right_input == 1 and (blinkPulse and 1 or 0) or ceil(values.brakelights or values.brake or 0) values.brakelight_signal_L = values.signal_left_input == 1 and (blinkPulse and 1 or 0) or ceil(values.brakelights or values.brake or 0)
-- inject imported electrics events second time, this should be the last step before update electrics by ignition state so that we can override everything if needed beamstate.updateRemoteElectrics(false)
updateElectricsWithIgnitionLevel() end
local function updateElectricsWithIgnitionLevelEuropean() local values = M.values if values.ignitionLevel == 0 then --adjustments in "off" mode values.brakelights = 0 values.parkingbrakelight = 0 values.brakelight_signal_R = 0 values.brakelight_signal_L = 0
values.parking = 0 values.reverse = 0 values.lights = 0 values.lights_state = 0 values.turnsignal = 0 values.signal_L = 0 values.signal_R = 0 values.hazard = 0 values.hazard_enabled = 0 values.lightbar = 0 lightbarState = 0 values.lowpressure = 0 values.oil = 0 values.lowhighbeam = 0 values.lowbeam = 0 values.highbeam = 0 values.fog = 0 values.horn = 0 values.lowhighbeam_signal_R = 0 values.lowhighbeam_signal_L = 0 values.highbeam_wigwag_R = 0 values.highbeam_wigwag_L = 0 values.reverse_wigwag_R = 0 values.reverse_wigwag_L = 0 values.signal_right_input = 0 values.signal_left_input = 0 signalLeftState = false signalRightState = false signalWarnState = false automatic_indicator_stop = nop generateBlinkPulse = nop values.fuel = 0 values.lowfuel = 0 values.abs = 0 values.esc = 0 values.tcs = 0 values.oiltemp = 0 values.watertemp = 0 values.checkengine = 0 values.ignition = 0 values.running = 0 values.engineRunning = 0elseif values.ignitionLevel == 1 then --adjustments in "accessory" mode else --adjustments in "on" mode end end
local function sanitizeIgnitionLevel(desiredIgnitionLevel) --return the actual ignition level for a desired one so that certain levels can be "forbidden" return ignitionLevelSanitization[desiredIgnitionLevel] or 0 end
local function setAllowedIgnitionLevels(allowedIgnitionLevels) if #allowedIgnitionLevels <= 0 then --make sure that we always have at least one allowed ignition level allowedIgnitionLevels = {0} --print warning end local allowedIgnitionLevelsLookup = {} for _, level in ipairs(allowedIgnitionLevels) do allowedIgnitionLevelsLookup[level] = true end
ignitionLevelSanitization = {[0] = 0, [1] = 1, [2] = 2, [3] = 3}
for i = 0, 3, 1 do --for every possible ignition level if not allowedIgnitionLevelsLookup[i] then --check if it's currently allowed for j = min(i + 1, 3), 3, 1 do --if not, first try to find anything higher that is allowed if allowedIgnitionLevelsLookup[j] then ignitionLevelSanitization[i] = j break end end
if not allowedIgnitionLevelsLookup[i] then --if we couldn't find anything higher allowed for j = max(i - 1, 0), 0, -1 do --try to find anything lower that is allowed... if allowedIgnitionLevelsLookup[j] then ignitionLevelSanitization[i] = j break end end end endend end
local function reset() M.disabledState = {}
for _, s in pairs(smoothers) do s:set(0) end
M.values.throttle = 0 M.values.brake = 0 M.values.steering = 0 M.values.clutch = 0 M.values.wheelspeed = 0 M.values.odometer = 0 M.values.avgWheelAV = 0 M.values.airspeed = 0 M.values.airflowspeed = 0 M.values.horn = false M.values.boost = 0 M.values.boostMax = 0
lightbarState = 0 lightsSavedState = 0
local allowedIgnitionLevels = (v.data.electrics and v.data.electrics.allowedIgnitionLevels) or {0, 1, 2, 3} --read allowed ingition levels from jbeam or use all of them by default setAllowedIgnitionLevels(allowedIgnitionLevels)
ignitionHoldingStarter = false ignitionHoldingStarterTimer = 0 ignitionWasStartingEngine = false
local spawnVehicleIgnitionLevel = settings.getValue("spawnVehicleIgnitionLevel") or 3 if v.config.additionalVehicleData and v.config.additionalVehicleData.spawnWithEngineRunning ~= nil then spawnVehicleIgnitionLevel = v.config.additionalVehicleData.spawnWithEngineRunning and 3 or 0 end M.values.ignitionLevel = sanitizeIgnitionLevel(spawnVehicleIgnitionLevel) previousIgnitionLevel = spawnVehicleIgnitionLevel - 1
local ignitionLevelOverrideType = (v.data.electrics and v.data.electrics.ignitionLevelOverrideType) or "european" if ignitionLevelOverrideType == "european" then updateElectricsWithIgnitionLevel = updateElectricsWithIgnitionLevelEuropean elseif ignitionLevelOverrideType == "none" then updateElectricsWithIgnitionLevel = nop end end
local function init() reset() end
local function initLastStage() if M.values.ignitionLevel == 3 then M.values.ignitionLevel = 2 previousIgnitionLevel = 3 end end
local function set_warn_signal(value) signalWarnState = value signalRightState = signalWarnState signalLeftState = signalWarnState automatic_indicator_stop = nop updateSignals() end
local function toggle_warn_signal() set_warn_signal(not signalWarnState) end
local function toggle_lights() lightsState = lightsState + 1 if lightsState == 1 then lightOn = lightOn or sounds.createSoundscapeSound("LightOn") sounds.playSoundSkipAI(lightOn) elseif lightsState == 2 then lightOn = lightOn or sounds.createSoundscapeSound("LightOn") sounds.playSoundSkipAI(lightOn) elseif lightsState == 3 then lightsState = 0 lightOff = lightOff or sounds.createSoundscapeSound("LightOff") sounds.playSoundSkipAI(lightOff) end end
local function light_flash_highbeams(enabled) if enabled then lightsSavedState = lightsState lightsState = 2 else lightsState = lightsSavedState end end
local function set_lightbar_signal(state) if state == lightbarState then return end
sirenSound = sirenSound or sounds.createSoundscapeSound("siren") lightbarState = state % (sirenSound ~= nil and 3 or 2)
-- 1 = lights, no sound -- 2 = lights + sound toggleSound(lightbarState == 2, sirenSound) end
local function toggle_lightbar_signal() set_lightbar_signal(lightbarState + 1) end
local function setLightsState(newval) lightsState = newval end
local function toggle_fog_lights() fogLightsState = not fogLightsState end
local function set_fog_lights(state) fogLightsState = state end
local function horn(state) hornState = state if hornState then hornSound1 = hornSound1 or sounds.createSoundscapeSound("horn") if not hornSound1 then return end if hornSound2 then obj:setVolume(hornSound2, 0) end obj:setVolume(hornSound1, 1) obj:playSFX(hornSound1) else if hornSound1 then obj:stopSFX(hornSound1) end hornSound1, hornSound2 = hornSound2, hornSound1 end end
local function setIgnitionLevel(ignitionLevel) --print("Ignition Level: " .. ignitionLevel) previousIgnitionLevel = M.values.ignitionLevel local newIgnitionLevel = sanitizeIgnitionLevel(ignitionLevel) M.values.ignitionLevel = newIgnitionLevel if ignitionMessageLookup[newIgnitionLevel] then guihooks.message({txt = ignitionMessageLookup[newIgnitionLevel], context = {}}, 4, "vehicle.ignition.ignitionLevel") end
if newIgnitionLevel == 0 or newIgnitionLevel == 1 then controller.mainController.setEngineIgnition(false) controller.mainController.setStarter(false) elseif newIgnitionLevel == 2 then controller.mainController.setEngineIgnition(true) controller.mainController.setStarter(false) elseif newIgnitionLevel == 3 then controller.mainController.setEngineIgnition(true) controller.mainController.setStarter(true) end end
local function toggleIgnitionLevelOnDown() ignitionHoldingStarter = true end
local function toggleIgnitionLevelOnUp() if ignitionWasStartingEngine and M.values.ignitionLevel < 3 then --this case happens when the vehicle controller already switched to level 2 by itself after the engine fired up --make sure to pretend that we are still in level 3 so that the following logic works. Not nice, but couldn't find a better solution that actually works --this logic is also needed so that we can set level 3 from external (eg GE) and have the engine start autoamtically and go back to level 2 after doing so --(vehicle controller switches to level 2 after engine fired up) setIgnitionLevel(3) end local currentIgnitionLevel = M.values.ignitionLevel ignitionHoldingStarter = false ignitionWasStartingEngine = false
if currentIgnitionLevel == 0 then setIgnitionLevel(1) elseif currentIgnitionLevel == 1 then if previousIgnitionLevel < currentIgnitionLevel then setIgnitionLevel(2) else setIgnitionLevel(0) end elseif currentIgnitionLevel == 2 then setIgnitionLevel(1) elseif currentIgnitionLevel == 3 then setIgnitionLevel(2) end end
-- public interface M.updateGFX = updateGFX M.updateGFXSecondStep = updateGFXSecondStep M.toggle_left_signal = toggle_left_signal M.toggle_right_signal = toggle_right_signal M.stop_turn_signal = stop_turn_signal M.toggle_warn_signal = toggle_warn_signal M.set_warn_signal = set_warn_signal M.toggle_lightbar_signal = toggle_lightbar_signal M.set_lightbar_signal = set_lightbar_signal M.toggle_fog_lights = toggle_fog_lights M.set_fog_lights = set_fog_lights M.toggle_lights = toggle_lights M.light_flash_highbeams = light_flash_highbeams M.setLightsState = setLightsState M.horn = horn M.setIgnitionLevel = setIgnitionLevel M.toggleIgnitionLevelOnDown = toggleIgnitionLevelOnDown M.toggleIgnitionLevelOnUp = toggleIgnitionLevelOnUp M.setAllowedIgnitionLevels = setAllowedIgnitionLevels M.resetLastStage = initLastStage M.reset = reset M.init = init M.initLastStage = initLastStage return M
используя этот код выпиши мне все переменные electrics в формате local имяпеременной -- ед.изм (rpm/0 or 1/0 to 1/number/Degrees/etc) ---- описание переменной local имяпеременной -- ед.изм (rpm/0 or 1/0 to 1/number/Degrees/etc) ---- описание переменной etc
- Assistant
Вот список переменных electrics, используемых в данном коде:
local throttle -- 0 to 1 ---- Степень нажатия на педаль газа local brake -- 0 to 1 ---- Степень нажатия на педаль тормоза local steering -- -1 to 1 ---- Положение руля (лево/право) local clutch -- 0 to 1 ---- Степень нажатия на педаль сцепления local wheelspeed -- number ---- Скорость вращения колес local odometer -- number ---- Пробег автомобиля local avgWheelAV -- number ---- Среднее угловое вращение колес local airspeed -- number ---- Скорость автомобиля относительно воздуха local horn -- 0 or 1 ---- Состояние сигнала (включен/выключен) local rpmspin -- Degrees ---- Угловое значение для тахометра local rpm -- rpm ---- Обороты двигателя local boost -- number ---- Значение давления наддува (комбинированное для турбо и компрессора) local boostMax -- number ---- Максимально допустимое значение давления наддува (комбинированное для турбо и компрессора) local accXSmooth -- number ---- Значение плавного ускорения по оси X local accYSmooth -- number ---- Значение плавного ускорения по оси Y local accZSmooth -- number ---- Значение плавного ускорения по оси Z local trip -- number ---- Пробег по трипметру local brakelights -- 0 or 1 ---- Состояние задних тормозных огней (включен/выключен) local parkingbrake -- 0 to 1 ---- Степень активации стояночного тормоза local parkingbrakelight -- 0 or 1 ---- Состояние индикатора стояночного тормоза (включен/выключен) local lights -- 0 to 2 ---- Состояние передних фар (выкл/ближний свет/дальний свет) local lights_state -- 0 to 2 ---- Текущее состояние передних фар local turnsignal -- -1, 0, 1 ---- Поворотник (лево/выкл/право) local airflowspeed -- number ---- Скорость воздушного потока local altitude -- number ---- Высота над уровнем моря local parking -- 0 or 1 ---- Состояние сигналов парковки (включен/выключен) local reverse -- 0 or 1 ---- Стапень активации заднего хода local signal_L -- 0 or 1 ---- Поворотник налево (включен/выключен) local signal_R -- 0 or 1 ---- Поворотник направо (включен/выключен) local hazard -- 0 or 1 ---- Состояние аварийной сигнализации (включен/выключен) local hazard_enabled -- 0 or 1 ---- Аварийная сигнализация активирована (включен/выключен) local lightbar -- 0 to 2 ---- Состояние световой балки (выкл/только свет/сирена и свет) local lowpressure -- 0 or 1 ---- Низкое давление в шинах local oil -- 0 or 1 ---- Высокая температура масла двигателя local lowhighbeam -- 0 or 1 ---- Комбинированное состояние ближнего и дальнего света local lowbeam -- 0 or 1 ---- Состояние ближнего света (включен/выключен) local highbeam -- 0 or 1 ---- Состояние дальнего света (включен/выключен) local fog -- 0 or 1 ---- Состояние противотуманных фар (включен/выключен) local lowhighbeam_signal_R -- 0 or 1 ---- Ближний/дальний свет и правый поворотник (комбинированное состояние) local lowhighbeam_signal_L -- 0 or 1 ---- Ближний/дальний свет и левый поворотник (комбинированное состояние) local highbeam_wigwag_R -- 0 or 1 ---- Дальний свет и мигающий правый свет при активации световой балки local highbeam_wigwag_L -- 0 or 1 ---- Дальний свет и мигающий левый свет при активации световой балки local reverse_wigwag_R -- 0 or 1 ---- Задний ход и мигающий правый свет при активации световой балки local reverse_wigwag_L -- 0 or 1 ---- Задний ход и мигающий левый свет при активации световой балки local signal_right_input -- 0 or 1 ---- Правый поворотник (включен/выключен) local signal_left_input -- 0 or 1 ---- Левый поворотник (включен/выключен) local rpmTacho -- number ---- Гладкое значение для тахометра local ignitionLevel -- 0 to 3 ---- Текущий уровень зажигания local fuel -- number ---- Уровень топлива local lowfuel -- 0 or 1 ---- Низкий уровень топлива local abs -- 0 or 1 ---- Состояние системы ABS local esc -- 0 or 1 ---- Состояние системы ESC local tcs -- 0 or 1 ---- Состояние системы TCS local oiltemp -- number ---- Температура масла local watertemp -- number ---- Температура воды local checkengine -- 0 or 1 ---- Индикатор проверки двигателя local ignition -- 0 or 1 ---- Состояние зажигания (включен/выключен) local running -- 0 or 1 ---- Состояние запуска двигателя (запуск/остановка) local engineRunning -- 0 or 1 ---- Состояние работы двигателяЭтот список содержит все electrics переменные, используемые в коде, с указанием единиц измерения и описанием их назначения.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.