Consider a variation of the biased coin problem in Example 8.4, and assume the…
- User
Consider a variation of the biased coin problem in Example 8.4, and assume the probability of heads, e, is distributed over [0, 1] according to the PDF !e (O) = 2 - 4 1 � - 0 1 , o E [0, 1] . Find the MAP estimate of e, assuming that n independent coin tosses resulted in k heads and n - k tails.
이 문제에서 왜 세타가 2분의 1보다 작을 때, 세타의 pdf가 4세타야?
- Assistant
In this problem, the probability of heads, denoted as (\theta), is distributed according to a given probability density function (PDF) over the interval ([0, 1]). Specifically,
[ f_\theta(\theta) = \begin{cases} 4\theta & \text{for } 0 \leq \theta < \frac{1}{2}, \ 4 (1 - \theta) & \text{for } \frac{1}{2} \leq \theta \leq 1. \end{cases} ]
The given PDF suggests that it is piecewise-defined over two segments of the interval ([0, 1]):
- For (0 \leq \theta < \frac{1}{2}), the PDF is (f_\theta(\theta) = 4\theta).
- For (\frac{1}{2} \leq \theta \leq 1), the PDF is (f_\theta(\theta) = 4(1 - \theta)).
To find the Maximum A Posteriori (MAP) estimate of (\theta), consider the following steps:
-
Likelihood: The likelihood of observing (k) heads and (n-k) tails given (\theta) is: [ P(D \mid \theta) = \theta^k (1 - \theta)^{n-k}, ] where (D) represents the data of (n) independent coin tosses resulting in (k) heads.
-
Prior: The prior distribution is given by (f_\theta(\theta)), which is: [ f_\theta(\theta) = \begin{cases} 4\theta & \text{for } 0 \leq \theta < \frac{1}{2}, \ 4(1 - \theta) & \text{for } \frac{1}{2} \leq \theta \leq 1. \end{cases} ]
-
Posterior: The posterior distribution is proportional to the product of the likelihood and the prior: [ P(\theta \mid D) \propto P(D \mid \theta) \cdot f_\theta(\theta). ]
Substituting the expressions for the likelihood and the prior, we get:
For (0 \leq \theta < \frac{1}{2}): [ P(\theta \mid D) \propto \theta^k (1 - \theta)^{n-k} \cdot 4\theta = 4 \theta^{k+1} (1 - \theta)^{n-k} ]
For (\frac{1}{2} \leq \theta \leq 1): [ P(\theta \mid D) \propto \theta^k (1 - \theta)^{n-k} \cdot 4(1 - \theta) = 4 \theta^k (1 - \theta)^{n-k+1} ]
- MAP Estimate: The MAP estimate is the value of (\theta) that maximizes the posterior distribution (P(\theta \mid D)).
For (0 \leq \theta < \frac{1}{2}):
Solve: [ \theta^{k+1} (1 - \theta)^{n-k} ]
Take the derivative with respect to (\theta) and set it to zero to find the critical points.
For (\frac{1}{2} \leq \theta \leq 1):
Solve: [ \theta^k (1 - \theta)^{n-k+1} ]
Following the similar approach of differentiation and setting the derivative to zero.
For the whole range (0 \leq \theta \leq 1), after finding critical points from each segment and comparing them, the MAP estimate will be the value of (\theta) that provides the highest posterior probability.
Ultimately, the piecewise nature of the PDF and their resulting variances in formula lead to distinct evaluation in each range. The segment where (\theta) is less than (\frac{1}{2}) yields (4\theta) as its PDF because it linearly increases from 0 to ( \frac{1}{2} ).
To provide an answer to why exactly ( \theta ) is less than or equal ( \frac{1}{2}) considering the nature of the PDF articulated within the intervals and stipulated behavior is essential for realizing realistic coin flips evaluations.
- User
세타가 2분의 1보다 작을 때, 세타의 pdf가 4세타인지만 빠르게 한글로 알려줘
- Assistant
네, 맞습니다. (\theta)가 (\frac{1}{2})보다 작을 때, (\theta)의 확률 밀도 함수(PDF)는 (4\theta)입니다. 이는 문제에서 주어진 조건에 따라 (\theta)의 분포가 ([0, \frac{1}{2}]) 구간에서는 (4\theta)로 정의되어 있기 때문입니다.
- User
어떻게 4세타가 나온거야?
- Assistant
(\theta)의 확률 밀도 함수(PDF)인 (f_\theta(\theta))가 두 구간으로 나뉘어진 이유를 이해하기 위해, 먼저 주어진 함수의 전체 구간에서의 형태를 살펴볼 필요가 있습니다. PDF 함수의 형태는 다음과 같습니다: [ f_\theta(\theta) = \begin{cases} 4\theta & 0 \leq \theta < \frac{1}{2}, \ 4(1 - \theta) & \frac{1}{2} \leq \theta \leq 1. \end{cases} ]
이 함수가 왜 이런 형태를 가지는지 이해하려면, PDF가 만족해야 하는 두 가지 주요 조건에 대해 알아야 합니다:
- PDF는 항상 0 이상이어야 합니다.
- PDF의 전체 구간에서의 적분값은 1이어야 합니다.
주어진 (f_\theta(\theta))에 대해 첫 번째 조건은 명백히 충족됩니다.
이제 두 번째 조건인 적분값이 1인지 확인해 보겠습니다. PDF (f_\theta(\theta))는 두 구간으로 나뉘어 있으므로 각 구간에 대해 적분을 계산하고 이를 더하여 전체 적분값이 1인지 확인해보겠습니다.
-
구간 (0 \leq \theta < \frac{1}{2}): [ \int_0^{1/2} 4\theta , d\theta ]
-
구간 (\frac{1}{2} \leq \theta \leq 1): [ \int_{1/2}^1 4(1 - \theta) , d\theta ]
두 적분을 계산하여 더해 봅시다:
첫 번째 적분: [ \int_0^{1/2} 4\theta , d\theta = 4 \int_0^{1/2} \theta , d\theta = 4 \left[ \frac{\theta^2}{2} \right]_0^{1/2} = 4 \left( \frac{(1/2)^2}{2} - \frac{0^2}{2} \right) = 4 \cdot \frac{1}{8} = \frac{1}{2} ]
두 번째 적분: [ \int_{1/2}^1 4(1 - \theta) , d\theta = 4 \int_{1/2}^1 (1 - \theta) , d\theta = 4 \left[ \theta - \frac{\theta^2}{2} \right]_{1/2}^1 = 4 \left( (1 - \frac{1}{2}) - (\frac{1}{2} - \frac{1}{8}) \right) = 4 \cdot \frac{1}{2} = \frac{1}{2} ]
두 적분의 합은: [ \frac{1}{2} + \frac{1}{2} = 1 ]
따라서 주어진 PDF ( f_\theta(\theta) )는 확률 밀도 함수의 조건을 만족합니다. 이처럼, (\theta)가 (\frac{1}{2}) 미만일 때 (4\theta)라는 형태를 가지는 이유는 주어진 PDF 함수가 전체 적분값이 1이 되도록 설계되었기 때문입니다. 이는 (\theta)가 구간 ([0, \frac{1}{2}])에서 선형적으로 증가하며 그 값을 반영하는 것입니다.