I’m learning linear algebra and specifically linear algebra and the dot product. Please…
- User
I’m learning linear algebra and specifically linear algebra and the dot product. Please help me and explain the following chapter on lines step by step for my notes. Menu 5:33PMk cMd 3.6.1 Lines Throughout this book, straight Iines will mostly be used, and therefore, the shorter term line is often used instead. A straight line can be described with a starting point, s, and a direction, a, as illustrated to the right. To describe a line, it may be convenient to have a representation that can find all possible points on the line. First, start with the point, p,to the right, and create a vector from s to p, i.e., sp. If p is located on the line,described by s and , then ss must be parallel to a. In fact, a scalar,, must exist which makes exactly as long as s, which is expressed as sP=tid. (3.55) Since p is located in the direction of a, we also know that t>o. For , which also lies on the line, there is another scalar, w, which satisfies: so-td. Since g is located in the opposite direction of d, it is clear that t<o. For r, on the other hand, there is no scalar, t, that satisfies a similar relation. That is, SA4ta for all values of.. The only difference between p and o is that they use different scalars, and . Hence, it makes sense that any point on the line can be described by using a particular scalar, . Therefore, we use r() to denote a function of a scalar, t, which returns a point, p. That is, for different values of , different points, p 5:35PMisMd Menu satisfies a similar relation. That is, sa+ta for all values of. The only difference between p and o is that they use different scalars, , and . Hence, it makes sense that any point on the line can be described by using a particular scalar, -. Therefore, we use to denote a function of a scalar,t, which returns a point, p. That is, for different values of, different points,p , will be generated. This expression can be rewritten as SP(t=td P(t)-S=td P(t)=S+td. (3.56) Note that all points, ro, on the line are described by starting at s and then adding a scaled direction vector, i, to reach rw. Some examples: Po)-s, P1)=s+d,and p{-2.5)=s-2.. This type of parameterized line is summarized in the following definition. Definition 3.6: A Parameterized Line A line parameterized by tei can be described by a starting point, s, and a direction vector, a. All points, r, on a line can be described by P(t) =S+td. Note that a/0, otherwise, only a (3.57) single point, s, will be generated (i.e., no line). One often says that the line above is on explicit form, which simply means that the points, po, on the line can be generated directly from the expression. Lines on explicit form in one, two, and three dimensions can 5:36PM心FM one, two, and three dimensions can be found in Interactive Illustration 3.15 below. 3.15 P(t) Backward Reset Forward Interactive Illustration 3.15: This interactive illustration shows lines on the form: P(t) = S + td. Note that the slider can be influenced in order to change the value of t, which in turn alters the point, P(t). First, a line is shown in one dimension, which here is assumed to be the x-axis. The starting point, S, of the line can be moved, and in addition, the length of the direction vector, d, can be Nanged. Notice what happens to the speed of the point, P, when the length of d changes and the slider is pulled. Click Forward to see a two-dimensional line Note that taking the length of both sides of a line, P()-s=t, gives p()-sl=ltdl.When the line direction is normalized, i.e., iai-1, then x/-|P()-s. This can be very useful when computing intersections between, for example, a line and a sphere, as will be seen in Section 3.7. Recall that a two-dimensional point, s, 5:36PM心8M Recall that a two-dimensional point, s, has two scalar components (s), and similar, a two-dimensional vector, a has two scalar components, (a,,). Now, note that a two-dimensional line, Po)-s+ta, can be expressed in terms of its scalar components of the vectors and points as py(t)=sy + tdy. (3.58) The following gives a taste of Chapter 5 on Gaussian elimination. Take the top row above and multiply by a, and multiply the bottom row by a.. This leads to the following, where the parameter has been dropped fromp. and for clarity purposes, swd, + dzdyt (3.59) From algebra, it is known that a term can be subtracted from an expression as long as the same term is subtracted on both sides. Hence, it is legal to subtract the bottom row from the top row, which leads to Pady-Pyds =szdy-syds+drdyt-dadyt = szdy -syd. dypz-dsPy + sydz -8zdy =0, and as can be seen, the -terms have disappeared from the expression. This can further be rewritten as dypa-drPy+sydz-szdy=0 apa+bpy +c=0, where a=d,,o=-a., and c=sd.-s,,. This equation may be familiar to some,and especially, if we use.- andy-w,which gives ax +by+c=0. For +0, one can further rewrite the (3.60) (3.61) (3.62) 5:36PMisMe For 40, one can further rewrite the expression above as y=(-ax-c)/6= ke+m, where k--a/ and m--c/. This expression of a line is definitely familiar to most people, where . describes how muchy changes when . is increased by 1, and m is the ,-value at a=o. Note, however, as +lute=o, is a more general description of a two-dimensional line, since it makes it possible to describe vertical lines as well, which is not possible with y=k+m. It is important to note that the implicit form of the line, ap. +o, te=o, and the explicit form of the line, P()=5+t, describe the same line exactly, since the former expression was derived from the latter. Next, we will show that if the basis is orthonormal, the explicit form can be rewritten using dot products. For that purpose, we introduce n=(m,my)=(a,b)=(a,-a,),which leads to dyPz-doPy +sydz-Szdy =0 n·(P-S)=0, (3.63) where p-(p) and s-(). Here we have used the fact that (d,-d.).(PB)=d,p. +(-4,)m. when vectors ard described in an orthonormal base, as described in Theorem 3.4. As can be seen, if we take the vector from s to any point, p,on the line, then its dot product with.must be zero if p is to be on the line. Interestingly, we see that n.d-(a,-d.).(d,a,)-a,ys -asa, = o, i.e., n is orthogonal to the line direction, a. Therefore, n is often called the normal of the line. Note also, that 5:36PM哈sM the normal of the line. Note also, that n.(p-s)-o is said to be in implicit form, since it does not easily generate points on the line. However, it is straightforward to test whether a point, p, lies on the line. This leads to the following definition of a two-dimensional line on implicit form. Definition 3.7: Two-dimensional Implicit Line A line can be represented on implicit form by using a starting point, s, and a normal vector, . All points, p, on a line can then be described by n·(P-S)=0. (3.64)Note that n0, otherwise, all points, p,lie on the line. It should be noted that Definition 3.7 still holds in the case of a non- orthogonal basis. That is, the line can still be written as n.(p-s)=o where n is a normal vector to the line. However, it is no longer straightforward to calculate the coordinates of , since, in general, it is no longer equal to n=(dy,-d.). As seen above, there are two different types of mathematical representations for two-dimensional lines. The same cannot be done for a one-dimensional or three- dimensional line. However, as will be seen in Section 3.6.2, a three- dimensional plane equation has two seen in Secuon 3.6.2, a tnree- dimensional plane equation has two similar representations, both an implicit and an explicit. Returning to two-dimensional lines on the form: n.(p-s)-o, which says that all points p that lie on the line, represented by and a, fulfil the expression above, i.e., the dot product is equal to zero. What happens if pis not on the line? Well, the dot product will not be zero, of course, but can something else be read into that result? It turns out it can be quite useful. To demonstrate this, a scalar function, e, of p is created as e(P)=n.(P-S) This function is sometimes called (3.65) edge equation (in computer graphics) or signed distance function (this is explained later in this section). Since,cp) is defined using a dot product, it is known from Section 3.4, that e(p) is positive when the angle n. p-si<m/2, that e(p) is negative when in.p-s>m/, and that e(pj=o only when .p-s-m/2. However,ep)=o also means that p lies on the line defined by s and a. Therefore, when e(p)>o, we say that p is in the positive half-space of the line, and when ep)<0, p is in the negative half-space, i.e., the line divides the entire two- dimensional plane into two half- spaces. This is shown in Interactive Illustration 3.16. Menu e(p)-o only when in.p-sl-m/2.However,e(p)-o also means that p lies on the line defined by s and a. Therefore, when e(p)>o, we say that p is in the positive half-space of the line, and when e(p)<o, p is in the negative half-space, i.e., the line divides the entire two- dimensional plane into two half- spaces. This is shown in Interactive Illustration 3.16. e(P)=0.13 Interactive Illustration 3.16: The edge equation, e(P) = n· (P - S) is visualized here. Recall that the ine is represented by a starting point, S, and a normal vector, n, both which the reader can move around by clicking/touching and moving while pressing. Note that the line, where e(P) = 0, is dashed in this illustration. The circles with plus and minus signs in them show which side of the line is the positive and negative half-space. In particular, the reader is encouraged to move the point P so that it lies exactly on the dashed line, and at the same time, keep an eye on the calculation for e(P)in the bottom left corner. Furthermore, the reader should move P so that it is located in the positive half-space of the line, and into the negative half-space. As a final exercise, it is possible normalize n.i.e., make sure that n|| = 1, by remembering the definition of the dot product, and make sure that p - S coincides with n. Once n = 1, e(P) will show the orthogonal, signed distance from th dashed line to P. 5:36PMis8MJ... With help from the Definition 3.1 (dot product), Equation (3.65) can be rewritten as e(P)=n.(P-S)=|n|||P-S||cos[n,P-S]. Note that p-s|coln,p-s is actually the (3.66) orthogonal distance from p to the line,with the caveat that the "distance" is signed. This means that if p is in the positive half-space, then signed distance is positive, and if p is in the negative half-space, the signed distance is negative. Also note that ifn is normalized, then cp is exactly the signed orthogonal projection distance function, i.e., e(P)= |P-Sllcos(n, p-sl. Example 3.8: Study the line that passes through the point s-(1, and has normal n=(3,4).What is the distance from the point p-(w, to the line? What is the distance from p-(,) to the line? In the previous paragraph we saw that the distance could be calculated using the signed distance function e(p)=n·(p-s). In the discussion we also saw that the signed distance function can be written in the so called affine form e(P)=n.(P (3.67) In this particular example we get (3.68)
- Assistant
Let's break down the concepts outlined in the explanation about lines and how to represent them using linear algebra, step by step.
Basic Concepts of Lines
A line in geometry can be defined using a starting point and a direction. Mathematically, these elements can be described using vectors:
- Starting Point (s): A fixed point from which the line emanates.
- Direction Vector (d): A vector that indicates the direction of the line. It shows not just the line's path but also its orientation (which direction along the line it points).
Parametric Representation of a Line
The parametric form of a line is typically used to describe a line in vector space efficiently and succinctly. It's represented as:
[ \mathbf{P}(t) = \mathbf{s} + t\mathbf{d} ]
Where:
- (\mathbf{P}(t)) is a point on the line.
- (\mathbf{s}) is the starting point vector.
- (\mathbf{d}) is the direction vector.
- (t) is a scalar parameter. Varying (t) gives different points on the line.
Examples Using Parametric Representation
- To get the initial starting point (\mathbf{s}), set (t = 0): (\mathbf{P}(0) = \mathbf{s}).
- To move one unit in the direction of (\mathbf{d}), set (t = 1): (\mathbf{P}(1) = \mathbf{s} + \mathbf{d}).
- Negative values of (t) give points on the opposite side of (\mathbf{s}) along the line.
Implicit and Explicit Forms
There are two common ways to describe lines, especially in 2D:
- Explicit Form: Given directly as (\mathbf{P}(t) = \mathbf{s} + t\mathbf{d}). It's straightforward because it directly generates points on the line.
- Implicit Form: Typically described by the equation (\mathbf{n} \cdot (\mathbf{P} - \mathbf{s}) = 0), where (\mathbf{n}) is a normal vector to the line (perpendicular to (\mathbf{d})). This form is used to check if a given point (\mathbf{P}) lies on the line.
Normal Vector
From the implicit equation, (\mathbf{n} \cdot (\mathbf{P} - \mathbf{s}) = 0), the dot product of the normal vector (\mathbf{n}) and the vector from (\mathbf{s}) to (\mathbf{P}) equals zero, indicating that they are perpendicular. This is critical in computational geometry and physics for determining alignments and collisions.
Understanding Half-Spaces
The equation (\mathbf{n} \cdot (\mathbf{P} - \mathbf{s})) defines a "signed distance." Depending on the sign:
- Positive: (\mathbf{P}) lies on one side of the line.
- Negative: (\mathbf{P}) lies on the opposite side.
- Zero: (\mathbf{P}) is exactly on the line.
The dot product sign helps determine which side of the line a point resides without needing a visual representation.
Interactive Explorations
Using software or interactive illustrations, as mentioned, you can visually see how changing (t) affects a point's location on a line. Moving the normal vector or the starting point changes the orientation and position of the line, showing practical application and visualization of the theoretical concepts.
This tactile approach to learning linear algebra enriched by software simulations and visualizations can significantly enhance understanding and retention of geometric concepts and their algebraic representations.
- User
Be more detailed as possible
- Assistant
Certainly! Let's delve deeper into each concept associated with lines in linear algebra, expanding on the parametric and implicit forms, the role of the normal vector, and how it all ties together.
Parametric Representation of a Line
Definition and Formula
To define a line in a mathematical space (particularly in two or three dimensions), you need a point and a direction. These are defined as follows:
- Starting Point ((\mathbf{s})): A fixed vector from the origin to the initial or starting location of the line.
- Direction Vector ((\mathbf{d})): A vector that defines the direction and scale of the line.
Given these two vectors, the parametric equation of the line is expressed as: [ \mathbf{P}(t) = \mathbf{s} + t\mathbf{d} ] Where:
- (\mathbf{P}(t)) represents any point on the line as a function of the scalar parameter (t).
- (t) is a real number. By changing (t), we slide along the line: forward if (t) is positive, backward if (t) is negative.
Practical Examples
- At (t = 0): (\mathbf{P}(0) = \mathbf{s}). Point (\mathbf{P}) coincides with the starting point of the line.
- At (t = 1): (\mathbf{P}(1) = \mathbf{s} + \mathbf{d}). Point (\mathbf{P}) is one direction vector away from (\mathbf{s}), along the line.
- At (t = -1): (\mathbf{P}(-1) = \mathbf{s} - \mathbf{d}). Point (\mathbf{P}) is one direction vector away from (\mathbf{s}), but in the opposite direction along the line.
Implicit Form of a Line
Definition and Equation
The implicit form of a line is used primarily for computational checks, like determining if points lie on a particular line, or for defining line boundaries in computational graphics and physics simulations.
Given a normal vector (\mathbf{n}), which is perpendicular to the direction vector (\mathbf{d}), the implicit form is given by: [ \mathbf{n} \cdot (\mathbf{P} - \mathbf{s}) = 0 ] This equation effectively states that the dot product between the normal vector and any vector drawn from the starting point to a point on the line equals zero, indicating orthogonality.
Geometrical Meaning
Orthogonality here is crucial as it defines the line completely in terms of perpendicularity:
- Any point (\mathbf{P}) satisfying this condition must be on the line since (\mathbf{n}) is perpendicular to the direction vector.
- If (\mathbf{n} \cdot (\mathbf{P} - \mathbf{s}) \neq 0), the point does not lie on the line.
Deriving the Normal Vector
Given a direction vector (\mathbf{d} = (d_x, d_y)) in a 2D space, a normal vector can be found as (\mathbf{n} = (-d_y, d_x)) or (\mathbf{n} = (d_y, -d_x)). These give vectors perpendicular to (\mathbf{d}).
Signed Distance Function
This function provides a scalar value representing how far and in what direction a point (\mathbf{P}) is relative to a line:
[ e(\mathbf{P}) = \mathbf{n} \cdot (\mathbf{P} - \mathbf{s}) ]
Uses
- Positive (e(\mathbf{P})): (\mathbf{P}) is on the side of the line to which (\mathbf{n}) points.
- Negative (e(\mathbf{P})): (\mathbf{P}) is on the opposite side.
- Zero: (\mathbf{P}) lies exactly on the line.
Conclusion and Practical Implications
Understanding these concepts allows practitioners in fields such as graphics programming, robotics, and physics simulations to utilize mathematical line representations effectively. They address problems such as collision detection, rendering, and navigation efficiently through simple algebraic methods.
This depth of understanding furnishes a robust conceptual framework for applying linear algebra tools to solve practical problems not only in theoretical mathematics but also in applied sciences and engineering.