Heres how: Enable asahi-krun copr:…
- User
Heres how:
Enable asahi-krun copr: https://copr.fedorainfracloud.org/coprs/slp/asahi-krun/
Install krunvm
Enter these commands: sudo dnf remove libkrunfw libkrun, sudo dnf install libkrunfw-4.0.0
asahikrun-1.fc39 libkrun-1.6.0asahikrun-3.fc39Clone virglrenderer repo with asahi-native context: git clone https://gitlab.freedesktop.org/slp/virglrenderer.git cd virglrenderer git checkout asahi-native-context-wip
Run: meson setup build -Ddrm-asahi-experimental=true
Then do cd build then run sudo ninja install
now do buildah unshare, and run: krunvm create --cpus 6 --mem 6144 --name asahi-krun quay.io/slopezpa/asahi-krun
then do krunvm start asahi-krun /bin/bash
now run dhclient, then dnf install 'dnf-command(copr)'
then add the asahi-mesa copr: dnf copr enable slp/asahi-mesa
then install the packages necessary: dnf install mesa-libGL-devel mesa-vulkan-drivers mesa-libOSMesa mesa-libEGL mesa-libglapi mesa-va-drivers mesa-libGL mesa-dri-drivers mesa-vdpau-drivers mesa-libgbm-devel mesa-libgbm mesa-omx-drivers mesa-libd3d mesa-libxatracker-devel
then exit then enter the vm: krunvm start asahi-krun how do I do this on aarch64 fedora linux? I dont have any build tools installed either so i need those too
- Assistant
To achieve what you've described on a Fedora Linux system running on an aarch64 architecture (also known as ARM64), including installing necessary build tools, you would need to follow a structured approach. Broadly, this involves setting up the required repositories, installing the necessary packages and the build tools, and then proceeding with the specific software build and VM creation steps that you've described. Here's a guide to get you through this process:
Step 1: Preparing the System and Installing Build Tools
-
Open a Terminal: You will need to use the terminal for executing the commands.
-
Ensure your system is up to date:
sudo dnf update -
Install Development Tools: Fedora provides a convenient meta-package for installing a group of development tools and system utilities which are useful for building software.
sudo dnf groupinstall "Development Tools" "Development Libraries"
Step 2: Setting up Repositories and Installing krunVM
-
Enable Asahi-krun COPR:
sudo dnf copr enable slp/asahi-krun -
Remove any existing libkrun versions and Install Custom Versions:
sudo dnf remove libkrunfw libkrun sudo dnf install libkrunfw-4.0.0~asahikrun-1.fc39 libkrun-1.6.0~asahikrun-3.fc39
Step 3: Clone the Virglrenderer Repository
-
Clone the Repository:
git clone https://gitlab.freedesktop.org/slp/virglrenderer.git cd virglrenderer git checkout asahi-native-context-wip -
Setup the Build with Meson: If you do not have Meson, first install it using
sudo dnf install meson.meson setup build -Ddrm-asahi-experimental=true cd build sudo ninja install
Step 4: Working with Buildah and krunvm
-
Install Buildah if you do not already have it:
sudo dnf install buildah -
Use Buildah:
buildah unshare -
Create an Asahi-krun VM: You might need to ensure you have
krunvminstalled; if it wasn't installed earlier, install it now.krunvm create --cpus 6 --mem 6144 --name asahi-krun quay.io/slopezpa/asahi-krun -
Start VM and Configure Network:
krunvm start asahi-krun /bin/bash dhclient
Step 5: Installing Mesa Development Packages
-
Enable asahi-mesa COPR:
dnf copr enable slp/asahi-mesa -
Install Mesa packages:
dnf install mesa-libGL-devel mesa-vulkan-drivers mesa-libOSMesa mesa-libEGL mesa-libglapi mesa-va-drivers mesa-libGL mesa-dri-drivers mesa-vdpau-drivers mesa-libgbm-devel mesa-libgbm mesa-omx-drivers mesa-libd3d mesa-libxatracker-devel
After completing these steps, exit the
krunvmenvironment and start it again as mentioned in your commands:krunvm start asahi-krunNote: The installation commands are specifically for Fedora 39 as inferred from the package versions. Ensure you perform these steps on a compatible system. Some commands or package versions might need adjustments based on the actual Fedora release you're using or updates to the repositories.
Additionally, ensure that your hardware supports virtualization technologies necessary for these operations, especially when working in an ARM64 environment.
-
- User
sudo dnf groupinstall “Development Tools” “Development Libraries” [sudo] password for jayden: Fedora 39 - aarch64 - Updates 34 kB/s | 13 kB 00:00
allow_vendor_change is disabled. This option is currently not supported for downgrade and distro-sync commands Module or Group '“Development' is not available. Module or Group 'Tools”' is not available. Module or Group '“Development' is not available. Module or Group 'Libraries”' is not available. Error: Nothing to do. - Assistant
The issue you are encountering seems to be due to incorrect quotation marks in the command. It's a common problem, especially when commands are copied from web pages—they often contain “smart quotes” rather than the standard ASCII quotation marks.
In command-line interfaces, always use the straight quotation marks found on your keyboard (usually the same key as the double-quote, without holding Shift for single quotes).
Corrected Command
Here's the corrected command with standard quotation marks:
sudo dnf groupinstall "Development Tools" "Development Libraries"Steps:
-
Open your terminal: You will continue to use this for the remaining setup.
-
Run the corrected command: Copy and paste the above-corrected command into your terminal and execute it.
This command will install the necessary development tools and libraries which are essential for building software on your Fedora system.
If you still encounter issues with this step or any other steps, ensure:
- Your system is up to date (
sudo dnf update). - You are connected to the internet.
- You have properly configured repository access for Fedora, including any necessary third-party repositories if your operation requires them.
Executing the command with correct syntax should work without presenting the previous errors related to group or module availability.
-
- User
root@jayden-macbookpro:~/Downloads/virglrenderer/build# krunvm start asahi-krun /bin/bash dhclient whoami nothing is coming back
- Assistant
If you've successfully started a VM with
krunvm start asahi-krun /bin/bashbut commands likedhclientandwhoamiaren't producing any output or the expected behavior, there could be a few reasons behind this. Let's explore some troubleshooting steps you can take:1. Verify VM State and Network Interface
- First, ensure the VM is correctly running. You can list running VMs with a
krunvm listcommand to verify thatasahi-krunis among them. - Check if
dhclientis indeed installed and usable within the VM environment. The absence of a DHCP client would mean you can't automatically acquire an IP address. - Verify that the network interface is recognized by your VM. You can use
ip aorifconfigto list network interfaces. If no interface is listed besides the loopback, there might be an issue with the network device emulation.
2. Inspect VM Startup Logs
- Look at any startup logs or console output from the VM (if available). This might provide a clue as to why the expected behavior isn't occurring.
3. Manual Network Configuration (If Applicable)
If
dhclientdoesn't work or isn't present, and you know the network interface name, you could try manually configuring the network interface with static IP settings appropriate for your network, though this is more of a workaround and might not be applicable in a containerized/virtualized environment that expects DHCP to work out of the box.4. Interaction with the VM
- Ensure that you're actually interacting with the VM's shell and not accidentally typing commands in your host shell. This might sound basic, but such confusion can happen, especially if there are no clear visual cues differentiating your host terminal from the VM's shell.
- Some virtual environments may not automatically provide a login shell or might have issues bringing up a shell correctly. Verify if the VM environment supports interactive sessions in the way you're attempting to use them.
5. Revisit
krunvmDocumentation or Forums- Since
krunvmand configurations like the ones you're working with can be quite specific and advanced, revisiting the officialkrunvmdocumentation, any related forums, or user groups could provide additional insight. There might be nuances or additional steps required for your specific setup that aren't covered in a more general guide.
6. Debug and Additional Logs
- Look into any debug logs or verbose output options for
krunvm. Runningkrunvmor other relevant commands in a more verbose or debug mode might give you more insights into what's happening (or not happening).
7. Consider the Environment
- If this environment is supposed to provide a networked service or some other interaction, ensure all the prerequisites for that environment are correctly configured (e.g., virtual network settings, required services running, etc.).
Without more specific information about the
krunvmconfiguration and the expected behavior of the VM environment, these suggestions are somewhat general. Working closely with the specific documentation for the virtualization tools and environments you're using, and with any available community resources or forums, will be valuable. - First, ensure the VM is correctly running. You can list running VMs with a
- User
I run krunvm start asahi-krun /bin/bash and nothing happens
- Assistant
If running
krunvm start asahi-krun /bin/bashleads to no observable output or action, it suggests that either the virtual machine isn't starting as expected, or there might be an issue with how the command is being executed. Here are steps to diagnose and address potential issues:1. Verify VM Status
First, check if the VM
asahi-krunis actually running. This can be done by listing all VMs managed bykrunvm:krunvm listIf your VM is listed but not marked as running, there's an issue with the start process.
2. Check
krunvmOutput and LogsTry starting the VM again with any verbose or debug flags that
krunvmsupports to see if there's more detailed output:krunvm start asahi-krun /bin/bash --verbose(Note: Replace
--verbosewith the actual verbose or debug flag forkrunvmif it's different; you might need to consultkrunvmdocumentation orkrunvm --helpfor exact options.)This might provide insights into where the process is failing.
3. VM Configuration Issues
If the VM was previously starting correctly and suddenly stopped, consider any changes made to its configuration. Reverting recent changes or troubleshooting configuration aspects piece by piece could help identify the problem.
4. Ensure
krunvmCompatibility and RequirementsEnsure that your system meets all requirements for
krunvmand thatkrunvmitself is up to date. It might be worth checking if there are updates or patches forkrunvm:sudo dnf update krunvm5. Interact Directly Without
/bin/bashTry starting the VM without specifying
/bin/bashto see if it boots to a default shell or provides any error messages:krunvm start asahi-krun6. Check for System Resources
Ensure your system has enough resources (CPU, memory, etc.) available to start and run the VM. Insufficient resources can cause VMs to fail to start correctly.
7. Investigate Kernel or Security Restrictions
Check if there are any security modules (like SELinux or AppArmor) or kernel restrictions (like namespaces or cgroups limitations) that might be preventing
krunvmfrom functioning correctly.8. Utilities and Dependencies
Make sure all dependencies and utilities that
krunvmrelies upon are installed and functioning. Missing utilities or permissions issues can cause failures.9. Reach Out to Community or Support Channels
If you're still stuck, consider reaching out to the
krunvmcommunity, support channels, or forums. Others might have faced similar issues, or developers may provide direct assistance.10. Check Virtualization Support
Ensure that virtualization is enabled in your BIOS/UEFI settings. Also, verify that your CPU and system architecture support the necessary virtualization features for
krunvm.Through these steps, you should be able to diagnose why
krunvm start asahi-krun /bin/bashisn't behaving as expected. Each step can shed light on possible issues, ranging from configuration errors to system restrictions. - User
root@jayden-macbookpro:~/Downloads/virglrenderer/build# krunvm -v start asahi-krun /bin/bash
nothing is happening
- Assistant
Given that running
krunvm -v start asahi-krun /bin/bashyields no response or action, and considering the troubleshooting steps we've already explored without success, we need to consider deeper system-level or environmental issues that could be at play. The problem could be withkrunvmitself, issues with the specific VM configuration, or even more systemic issues on your system.Here are further steps and considerations:
Confirm
krunvmInstallation and Functionality-
Reinstall or Update
krunvm: It might help to reinstall or updatekrunvmto ensure it's properly installed and not corrupted.sudo dnf reinstall krunvm -
Basic
krunvmCommands: Test with the most basickrunvmcommands to ensure the tool is responsive.krunvm listIf this doesn't output anything or
krunvmisn't recognized, there's a fundamental issue with thekrunvminstallation or environment.
System and Compatibility Checks
-
Kernel Virtualization Support: Verify that your system's kernel supports virtualization.
krunvmleverages underlying virtualization technologies that must be supported and enabled (e.g., KVM).- Check if the KVM modules are loaded:
lsmod | grep kvm -
Hardware Virtualization: Ensure that hardware virtualization (VT-x for Intel processors or AMD-V for AMD processors) is enabled in your system's BIOS/UEFI settings. Without this, virtualization tools can fail silently.
-
SELinux or Firewalls: On some systems, SELinux policies or firewall rules might prevent virtualization software from operating correctly. Temporarily disabling SELinux (
setenforce 0) or configuring firewalls to allowkrunvmoperations could be a test to rule out security software interference.- Warning: Disabling SELinux or firewall rules can make your system vulnerable. Ensure you understand the implications and revert the settings (
setenforce 1) after testing.
- Warning: Disabling SELinux or firewall rules can make your system vulnerable. Ensure you understand the implications and revert the settings (
Consult Documentation and Communities
-
krunvmDocumentation: Revisit thekrunvmdocumentation. It's vital to ensure that no steps were missed and that your system meets all prerequisites for usingkrunvm. -
Technical Forums and Sources: Given the specific nature of the problem (silent failure without output), consulting forums like Stack Overflow, Fedora forums, or even reaching out to the
krunvmdevelopment team through their Git repository or contact avenues might uncover specific insights or similar cases.
Debugging and Logs
-
System Logs: Check system logs for any messages that occur when attempting to start the VM. The
dmesgand syslog (/var/log/syslogor journalctl for systems using systemd) might contain valuable hints. -
Strace: As a last resort, using
stracecan help identify whatkrunvmis attempting to do when it fails. This tool will display system calls made bykrunvm, which can be useful for low-level debugging.strace krunvm -v start asahi-krun /bin/bashNote: This will produce a lot of output and is best used if you're comfortable interpreting system call logs or you're willing to share this output with someone who can help.
Given the silent failure, if none of these steps reveals the problem, it's highly likely an issue with compatibility, system configuration, or a more obscure problem with
krunvmitself that might require developer intervention or patches. -
- User
how do I install kvm on my aarch64 fedora ayatem?
- Assistant
To install and configure KVM (Kernel-based Virtual Machine) on an aarch64 (ARM64) Fedora system, you need to follow a set of steps to ensure your system supports virtualization and has all the necessary packages installed. Here's how you can do it:
Step 1: Check Virtualization Support
First, verify that your CPU supports hardware virtualization. For ARM architectures, this typically means checking for support for the "Virtualization Host Extensions" (VHE). This can generally be assumed to be present on recent ARMv8 processors, but it's always good to verify.
lscpu | grep VirtualizationIf you see output that indicates support, you're good to proceed. If not, you might need to enable virtualization in your BIOS/UEFI settings, or it's possible your hardware doesn't support it.
Step 2: Install KVM and Related Packages
Fedora makes it simple to install KVM along with all necessary tools and libraries by using the DNF package manager. You need to install
qemu-kvm(QEMU emulator for KVM),libvirt(the toolkit to interact with the virtualization capabilities),virt-install(a command-line tool to create virtual machines), andvirt-manager(a desktop user interface for managing virtual machines).sudo dnf install qemu-kvm libvirt virt-install virt-manager bridge-utils libvirt-daemon-kvmThis command installs the basic packages required to host virtual machines using KVM.
Step 3: Start and Enable libvirtd Service
After installation, start and enable the
libvirtdservice so that it automatically starts at boot time.sudo systemctl start libvirtd sudo systemctl enable libvirtdThis will ensure that the virtualization environment is active and that you can manage it using either the command line (
virsh) or a graphical interface (virt-manager).Step 4: Verify the Installation
You can verify that KVM is installed and functioning properly by checking that the
libvirtservice is active and running.sudo systemctl status libvirtdThen, ensure that you can run VMs:
virsh list --allThis command should execute without error, though it may not list any VMs if you haven't created any yet.
Step 5: Add Your User to libvirt Group
To manage VMs as a non-root user, add your user account to the
libvirtgroup.sudo usermod -aG libvirt $(whoami) newgrp libvirtThis will allow your user to create and manage virtual machines without needing root permissions for every action.
Step 6: Use virt-manager (Optional)
For a GUI approach to manage VMs, you can use
virt-manager. It's installed as part of the previous step and can be launched from your applications menu or by runningvirt-managerin the terminal.Additional Notes
- Ensure your Fedora system is up to date (
sudo dnf update) before starting the installation. - Make sure your system's firmware settings (BIOS/UEFI) have virtualization options enabled.
- While
virt-managerprovides a graphical user interface, much of the VM management can also be done via command line usingvirshandvirt-install.
Following these steps should get you a working KVM installation on your aarch64 Fedora system, ready for virtualization tasks.
- Ensure your Fedora system is up to date (
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.