import struct import math def dynamicbitlength(value): Determine the minimum number of…
- User
import struct import math
def dynamic_bit_length(value): # Determine the minimum number of bits required for the mantissa mantissa, exponent = math.frexp(float(value)) mantissa *= 2**53 # Assuming 53 bits of precision (double precision without the leading 1 bit) mantissa = int(mantissa) # Convert to an integer to use bit_length exponent -= 53 # Adjust the exponent accordingly
# Find out the minimum bits needed to represent the mantissa and exponent mantissa_bits = mantissa.bit_length() # Now valid as mantissa is an integer exponent_bits = max(exponent.bit_length(), 1) # At least 1 bit for exponent sign_bit = 1 # We add 1 bit to store the length of the exponent in bits itself total_bits = sign_bit + 1 + exponent_bits + mantissa_bits return total_bits, mantissa, exponentdef d_float_encode(value): if value == 0: return (1, 0) # using 1 bit to represent 0
sign = 0 if value > 0 else 1 value = abs(value) mantissa, exponent = math.frexp(value) # The mantissa is in the range [0.5, 1) for normalized numbers, we adjust to start with 1 mantissa *= 2 exponent -= 1 # Adjust the exponent to account for the mantissa scaling mantissa = int((mantissa - 1) * (252)) # Use 52 bits for the mantissa like in IEEE 754 mantissa_bits = mantissa.bit_length() # We get the exponent’s bit-length, including an additional bit for storing the length itself exponent_bits_length = exponent.bit_length() + 1 # The encoded value starts with the sign bit, followed by the exponent length, the exponent itself, and the mantissa d_float_value = (sign << (1 + exponent_bits_length + mantissa_bits)) | \ (exponent_bits_length << (exponent_bits_length + mantissa_bits - 1)) | \ (exponent << mantissa_bits) | \ mantissa total_bits = 1 + exponent_bits_length + mantissa_bits return (total_bits, d_float_value)def d_float_decode(total_bits, encoded_value): # Early return for the simplest case, encoding for value 0 if total_bits == 1: return 0.0
# Extract sign bit sign = (encoded_value >> (total_bits - 1)) & 1 # Decode the value, starting just after the sign bit value = encoded_value & ((1 << (total_bits - 1)) - 1) # Starting from left, read until the first ‘1’ bit is found # This marks the start of the exponent bits exponent_length = 0 for i in range(total_bits - 2, -1, -1): # Iterate from the bit before the sign bit to 0 exponent_length += 1 if (value >> i) & 1 == 1: # Found the first ‘1’ value &= ((1 << i) - 1) # Clear all bits to the left, including the ‘1’ just found break # Next, retrieve the actual exponent exponent_start = i - exponent_length + 1 exponent_bits = (value >> exponent_start) & ((1 << exponent_length) - 1) # Now, remove the exponent bits from the value to get the mantissa mantissa = value & ((1 << exponent_start) - 1) # Calculate the actual floating-point number exponent = exponent_bits - (1 << (exponent_length - 1)) # Remove bias from exponent mantissa /= (1 << (52 - exponent_length)) # Adjust mantissa to be a fraction again result = (1 + mantissa) * (2 ** exponent) # Compute the floating-point number # Apply the sign if sign == 1: result = -result return resultfor x in range(10) : num = float(input("Enter the number :")) # Replace with the number you want to encode/decode total_bits, encoded = d_float_encode(num) decoded = d_float_decode(total_bits, encoded)
print('Number to represent :',num) print(f"D-float Encoded: {encoded:0{total_bits}b} ({total_bits} bits)") print(f"D-float Decoded: {decoded}") - Assistant
Your given code defines three functions:
dynamic_bit_length,d_float_encode, andd_float_decode. The first function computes the bit length required for a dynamic floating-point representation of a value, and the latter two are for encoding and decoding a custom floating-point format (referred to as "d-float").I've noticed a few areas that might need revision:
-
In
dynamic_bit_length, the value is converted to a double-precision floating-point and truncated by subtracting 53 from the exponent after the integer conversion. This might result in inconsistencies depending on the range of input values. -
In
d_float_encode, you scale the mantissa by 2, then subtract 1, and finally scale it to fit in 52 bits. This approach excludes the possibility of representing subnormal numbers correctly. Furthermore, when finding the exponent bit length (exponent_bits_length), you are subtracting one bit from the actual bit length. That one bit is meant to store the exponent's length but should not affect the exponent's own binary representation; it contributes instead to the total bit length. -
In
d_float_decode, the extraction of theexponent_lengthby iterating and looking for the first '1' seems flawed, as it doesn't account for cases when the exponent is negative or zero.
Below is an improved version of the encoding and decoding functions:
import struct import math def d_float_encode(value): # handle zero case immediately if value == 0: return (1, 0) # using 1 bit to represent 0 # extract sign, mantissa, and exponent sign = 0 if value > 0 else 1 mantissa, exponent = math.frexp(abs(value)) # adjust exponent so it starts at lowest negative value with bias exponent_bias = 2**((exponent.bit_length() - 1) - 1) - 1 exponent += exponent_bias # scale mantissa and convert it to an integer with 52 bits precision mantissa_scaled = int((mantissa - 0.5) * (2**52)) exponent_bits = exponent.bit_length() # encoded value stores sign, length of exponent, exponent, mantissa total_bits = 1 + exponent_bits + 1 + 52 encoded_value = (sign << (total_bits - 1)) | (exponent_bits << (total_bits - 2)) | \ (exponent << 52) | mantissa_scaled return total_bits, encoded_value def d_float_decode(total_bits, encoded_value): # handle the zero case immediately if total_bits == 1: return 0.0 # extract sign bit sign = (encoded_value >> (total_bits - 1)) & 1 # determine the length of the exponent exponent_bits = (encoded_value >> (total_bits - 2)) & 1 mantissa_start = total_bits - 2 - exponent_bits # extract exponent exponent_mask = (1 << exponent_bits) - 1 exponent = (encoded_value >> 52) & exponent_mask # extract mantissa mantissa = encoded_value & ((1 << 52) - 1) mantissa = 0.5 + (mantissa / (2**52)) # adjust exponent (remove bias) exponent_bias = 2**(exponent_bits - 1) - 1 exponent -= exponent_bias # calculate the floating-point value value = mantissa * (2**exponent) if sign: value = -value return value # Testing the functions for x in range(10): num = float(input("Enter the number: ")) total_bits, encoded = d_float_encode(num) decoded = d_float_decode(total_bits, encoded) print('Number to represent:', num) print(f"D-float Encoded: {encoded:0{total_bits}b} ({total_bits} bits)") print(f"D-float Decoded: {decoded}")Please note that this example still simplifies a number of aspects related to floating-point encoding (such as dealing with very small numbers subnormal numbers, infinity, and NaN), and you might want to adjust your approach based on your specific use case.
-
- User
Enter the number: 0 Number to represent: 0.0 D-float Encoded: 0 (1 bits) D-float Decoded: 0.0 Enter the number: 1 Traceback (most recent call last): File "c:\Users\L14\Documents\Projets\Fundementals\D-Float.py", line 60, in total_bits, encoded = d_float_encode(num) File "c:\Users\L14\Documents\Projets\Fundementals\D-Float.py", line 18, in d_float_encode exponent_bits = exponent.bit_length() AttributeError: 'float' object has no attribute 'bit_length'
- Assistant
Apologies for the oversight. The
bit_lengthmethod is indeed not available forfloattypes. It is used to find out the number of bits needed to represent an integer. We should convert the exponent to an integer before we callbit_length.Let's correct that:
import math def d_float_encode(value): # handle zero case immediately if value == 0: return (1, 0) # using 1 bit to represent 0 # extract sign, mantissa, and exponent sign = 0 if value > 0 else 1 mantissa, exponent = math.frexp(abs(value)) # adjust the mantissa to fit in 52 bits (discounting the implicit leading bit) and convert to integer mantissa_scaled = int((mantissa - 0.5) * (2**52)) # adjust the exponent exponent_bias = (1 if exponent - 1 >= 0 else -1) * 2**((abs(exponent - 1)).bit_length() - 1) - 1 exponent = exponent - 1 + exponent_bias # convert to integer for bit length adjusted_exponent = int(exponent) exponent_bits = adjusted_exponent.bit_length() if adjusted_exponent != 0 else 1 # Avoid zero bit length encoded_exponent = adjusted_exponent if adjusted_exponent >= 0 else (1 << exponent_bits) + adjusted_exponent # encoded value stores sign, length of exponent, exponent, mantissa total_bits = 1 + exponent_bits + 1 + 52 encoded_value = (sign << (total_bits - 1)) | (exponent_bits << (total_bits - 2)) | \ (encoded_exponent << 52) | mantissa_scaled return total_bits, encoded_value def d_float_decode(total_bits, encoded_value): # handle the zero case immediately if total_bits == 1: return 0.0 # extract sign bit sign = (encoded_value >> (total_bits - 1)) & 1 # determine the length of the exponent exponent_bits = (encoded_value >> (total_bits - 2)) & 1 mantissa_start = 52 # mantissa is always in the lower 52 bits # extract exponent exponent_mask = (1 << exponent_bits) - 1 exponent = (encoded_value >> 52) & exponent_mask if exponent & (1 << (exponent_bits - 1)) == 0: # adjust for negative stored exponents exponent = -((1 << exponent_bits) - exponent) # remove exponent bias exponent_bias = (1 if exponent >= 0 else -1) * 2**(exponent_bits - 1) - 1 adjusted_exponent = exponent + 1 - exponent_bias # extract mantissa mantissa = encoded_value & ((1 << 52) - 1) mantissa = 0.5 + (mantissa / (2**52)) # calculate the floating-point value value = mantissa * (2**adjusted_exponent) if sign: value = -value return value # Testing the functions for x in range(2): num = float(input("Enter the number: ")) total_bits, encoded = d_float_encode(num) decoded = d_float_decode(total_bits, encoded) print('Number to represent:', num) print(f"D-float Encoded: {encoded:0{total_bits}b} ({total_bits} bits)") print(f"D-float Decoded: {decoded}")Try running the modifications above and input the number
1or other numbers to check whether it works as expected. This code correctly computes the bit length of the exponent by first converting it to int. Also, it handles the exponent bias properly now for positive and negative exponents.