How to setup a HAProxy with Docker compose with the following criterias: - HAProxy run…
- User
How to setup a HAProxy with Docker compose with the following criterias:
- HAProxy run by docker-compose
- Incoming traffic on port 443
- HAProxy shoul act as a reverse proxy
- Incoming traffic to https://nc.mydomain.com should be proxied to internal server on https://myserver:8080
- Assistant
To set up HAProxy with Docker Compose to meet the mentioned criteria, you can follow these steps:
Step 1: Create a Docker Compose file Create a
docker-compose.yamlfile with the following content:version: '3' services: haproxy: image: haproxy:2.4 ports: - 443:443 volumes: - ./haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg restart: unless-stoppedStep 2: Create HAProxy Configuration File Create a file named
haproxy.cfgin the same directory as thedocker-compose.yaml, with the following content:global log /dev/log local0 log /dev/log local1 notice user haproxy group haproxy daemon defaults log global mode tcp option tcplog timeout connect 5000 timeout client 50000 timeout server 50000 frontend http_front bind *:443 ssl crt /etc/ssl/mycert.pem # replace with your SSL certificate path default_backend http_back backend http_back server myserver myserver:8080 maxconn 32 # replace myserver with your internal server hostname or IPStep 3: Start the HAProxy service Open a terminal and navigate to the directory containing the
docker-compose.yamlfile. Run the following command to start the HAProxy service:docker-compose up -dThis will start the HAProxy container and bind it to the host's port 443. All incoming traffic on port 443 will be directed to HAProxy.
Step 4: Configure DNS Make sure to configure your DNS settings so that
nc.mydomain.compoints to the server running HAProxy.That's it! The incoming traffic to
https://nc.mydomain.comwill now be proxied to the internal server onhttps://myserver:8080via HAProxy. - User
Excelent! Now a new problem to solve - I want it like the previeous but with this change.
- The external address should be https://nc.domain.com/org1
- but internal it should be the same as now
- in client browser I want the address to be https://nc.domain.com/org1/.... all the time
- Assistant
To achieve the updated requirements, you can modify the previous setup as follows:
Step 1: Update the Docker Compose file Update your
docker-compose.yamlfile with the following content:version: '3' services: haproxy: image: haproxy:2.4 ports: - 443:443 volumes: - ./haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg restart: unless-stoppedStep 2: Update the HAProxy Configuration File Modify the
haproxy.cfgfile to incorporate the changes:global log /dev/log local0 log /dev/log local1 notice user haproxy group haproxy daemon defaults log global mode tcp option tcplog timeout connect 5000 timeout client 50000 timeout server 50000 frontend http_front bind *:443 ssl crt /etc/ssl/mycert.pem acl org1_external_acl path_beg /org1 use_backend org1_backend if org1_external_acl default_backend http_back backend org1_backend reqrep ^([^\ ]*\ /)org1[/]?(.*) \1\2 server myserver myserver:8080 maxconn 32 backend http_back server myserver myserver:8080 maxconn 32In the updated configuration, we have added a new ACL
org1_external_aclthat checks if the incoming request path begins with/org1. If the condition is true, it uses theorg1_backendbackend, where we have added areqreprule to remove the/org1part from the request. For all other requests, it uses thehttp_backbackend as before.Step 3: Start the HAProxy service Run the following command to start the HAProxy service:
docker-compose up -dStep 4: Configure DNS and Firewall Make sure to configure your DNS settings so that
nc.domain.compoints to your server running HAProxy. Also, configure your firewall to allow incoming connections on port 443.Now, when accessing
https://nc.domain.com/org1, the traffic will be redirected to the internal server (e.g.,https://myserver:8080). Your clients will see the URL ashttps://nc.domain.com/org1/...in their browser while accessing any path under/org1.Note: You may need to adjust other parts of your system or application if they rely on the previous URL structure.
- User
How to define private key in haproxy.cfg?
- Assistant
To define a private key in the HAProxy configuration file (
haproxy.cfg), you can use thebinddirective with thessloption. Here's an example of how to define a private key in the configuration:frontend http_front bind *:443 ssl crt /etc/ssl/mycert.pem ...In the example above, the
/etc/ssl/mycert.pemfile contains both the SSL certificate and the private key. Ensure that the file path matches the location of your SSL certificate and private key file.Note: It is important to keep the private key file secure and restricted to appropriate permissions. Also, make sure that the file is accessible within the HAProxy container if you are running HAProxy using Docker.
By configuring the private key in this manner, HAProxy will utilize it for SSL/TLS termination and secure communication with the clients.
- User
Is it possible to also define the private key instead of combineing cert and private key?
- Assistant
Yes, it is possible to define the private key separately from the SSL certificate in HAProxy configuration. To do so, you would need to create a separate file for the private key and refer to it in the configuration.
Here's an updated example of how to define the private key separately:
-
Create separate files for the SSL certificate and private key, for example:
- SSL certificate file:
/etc/ssl/mycert.crt - Private key file:
/etc/ssl/mykey.key
- SSL certificate file:
-
Update the
haproxy.cfgfile with the following configuration:
frontend http_front bind *:443 ssl crt /etc/ssl/mycert.crt key /etc/ssl/mykey.key ...In the updated configuration, the
keydirective specifies the path to the private key file (/etc/ssl/mykey.key). Thessldirective uses thecrtoption to specify the path to the SSL certificate file (/etc/ssl/mycert.crt).By defining the private key separately, you can manage the SSL certificate and private key files separately, providing more flexibility and security in managing your SSL/TLS certificates with HAProxy.
-
- User
The "key ..." does not work. I get error. HAProxy are looking for a cert1.pem.key instead?
- Assistant
I apologize for the confusion. In HAProxy, the
keyoption in thebinddirective requires the private key file to have a specific naming convention.To define the private key separately, you can follow this naming convention:
- The SSL certificate file should be named
cert.pem. - The private key file should be named
key.pem.
Ensure that both the certificate and key files are located in the same directory.
Here's an updated example of how to define the private key separately:
-
Rename your files as follows:
- SSL certificate file:
/etc/ssl/cert.pem - Private key file:
/etc/ssl/key.pem
- SSL certificate file:
-
Update the
haproxy.cfgfile with the following configuration:
frontend http_front bind *:443 ssl crt /etc/ssl/cert.pem key /etc/ssl/key.pem ...Make sure to restart HAProxy after making these changes for the new configuration to take effect.
By following this naming convention, HAProxy will be able to locate and correctly associate the SSL certificate and private key files for secure communication.
- The SSL certificate file should be named
- User
The 'reqrep' directive is not supported anymore since HAProxy 2.1. Use 'http-request replace-path', 'http-request replace-uri' or 'http-request replace-header' instead. Can you replace that?
- Assistant
Apologies for the outdated information. You're correct that the
reqrepdirective is no longer supported in recent versions of HAProxy. Instead, you can use thehttp-request replace-pathdirective to achieve the same functionality.Here's an updated version of the HAProxy configuration with the correct directive:
global log /dev/log local0 log /dev/log local1 notice user haproxy group haproxy daemon defaults log global mode tcp option tcplog timeout connect 5000 timeout client 50000 timeout server 50000 frontend http_front bind *:443 ssl crt /etc/ssl/mycert.pem acl org1_external_acl path_beg /org1 http-request replace-path ^/org1(/.*) \1 if org1_external_acl default_backend http_back backend http_back server myserver myserver:8080 maxconn 32In the updated configuration, we use the
http-request replace-pathdirective to match the path/org1(/.*)and replace it with just(\1)if theorg1_external_aclcondition is satisfied. This effectively removes "org1" from the request path for requests proxied to the backend.Please note that the updated configuration assumes you are using HAProxy version 2.1 or above. Make sure to restart HAProxy for the new configuration to take effect.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.