Band transport is the dominant mechanism in materials with a continuous energy band…
- User
Band transport is the dominant mechanism in materials with a continuous energy band structure, is it right?
- Assistant
Yes, your statement is accurate. In materials with a continuous energy band structure, the dominant mechanism for electron transport is band transport. In such materials, electrons can move freely within an energy band, leading to efficient charge transport. This is in contrast to materials with a discrete energy level structure, where the dominant transport mechanism may involve hopping between energy levels.
- User
将以下这段英文写成report的形式,430词左右,用英文输出,要求层次分明结构清晰。This is a review paper and the authors present a comprehensive assessment of the existing and future CMOS technologies in this paper. Next, I will briefly discuss its main content.
First, we will review the history of transistor technology. Click. As is shown in the figure, the history of electronics is generally composed of three major electron devices – the vacuum tube, the bipolar junction transistor, and the metal-oxide-semiconductor field-effect transistor. The first two devices had important roles in advancing modern computing, but it is the rise of MOSFET, click, particularly CMOS (complementary metal-oxide-semiconductor) technology that really ignited the explosive development of information technology. Click. And the most appealing merit of the MOSFET is that the continuous scaling down of its physical size can drive every important metric, such as, cost, performance, energy consumption, towards efficiency. This part shows four major non-traditional FET scaling technologies (silicon-on-insulator, strained channel, high-dielectric-constant metal gate, fin field-effect transistors), corresponding to the four (0.18um, 90nm, 45nm, and 22nm) technology nodes, respectively.
Although MOSFET scaling comes with great benefits, it raises many technological challenges, including gate efficiency degradation, parasitic resistance and capacitance (as shown in figure a, as FET scaling down, the contact resistance, source/drain sheet resistance, (and current-crowding-induced resistance in the source/drain region) will keep increasing, and hence begin to undermine the benefits of scaling). What’s more, as scaling continues, the low-power merit of MOSFETs begins to be undermined by leakage currents, and four sources of leakage currents are shown in figure b. Furthermore, as the device size keeps decreasing, the variations in device electrical characteristics are introduced, which will inevitably stress the devices and degrade the reliability.
Accompanying with these challenges, the modern CMOS scaling technology is summarized by the authors as the following framework. One direction is the carrier transport engineering, targeting at higher carrier velocity, as higher carrier velocity can achieve better device performance at the same device size and supply voltage. One pathway is strain engineering, that is to introduce strain into a Si lattice to modify the Si band structure, and the other alternative one is to replace the Si channel with high-mobility materials, such as, Ge (Germanium) and III-V element materials. The other direction is improving the device electrostatics, that is lowering the natural length λ(This one), which is used to qualify the scalability of FETs. According to this equation, there are mainly three pathways. The first one is reducing the equivalent oxide thickness, that is to reduce T/e, corresponding to the (high-dielectric-constant metal gate) HKMG technology. The second one is employing multi-gate device topology, such as the silicon-on-insulator technology and three-dimensional transistors, to reduce a. The last one is reducing the channel thickness by using single-wall carbon nanotubes (SWNTs) and 2D layered semiconductors (2DS).
In the last section of this paper, the authors revisit the two aspects of transistors to explore the design space of future FETs. From the point of the authors, trans means transfer or modulation, and resistor means resistance of a channel. The authors’ investigation is shown in this figure. The device concepts in light blue are experimentally proven, the ones in dark grey are not, and these ones in light grey are unexplored.
- Assistant
Report: Comprehensive Assessment of Existing and Future CMOS Technologies
Introduction: This report provides a comprehensive assessment of existing and future CMOS (complementary metal-oxide-semiconductor) technologies. The authors review the history of transistor technology and highlight the rise of MOSFETs as the driving force behind information technology. The report also explores the challenges associated with MOSFET scaling and presents the modern CMOS scaling framework.
History of Transistor Technology: The history of electronics is discussed, encompassing three major electron devices - the vacuum tube, the bipolar junction transistor, and the metal-oxide-semiconductor field-effect transistor (MOSFET). While the first two devices played crucial roles in advancing computing, the emergence of MOSFETs, specifically CMOS technology, led to the explosive development of information technology. The key advantage of MOSFETs is the ability to continuously scale down their physical size, driving efficiency in cost, performance, and energy consumption. The review covers four major non-traditional FET scaling technologies corresponding to different technology nodes.
Technological Challenges: The report acknowledges the benefits accompanying MOSFET scaling but also highlights the technological challenges it presents. These challenges include gate efficiency degradation and the increase in parasitic resistance and capacitance. The impact of scaling on contact resistance, source/drain sheet resistance, and current-crowding-induced resistance is discussed, along with the introduction of leakage currents and the degradation of device reliability.
Modern CMOS Scaling Technology: The authors present a framework for modern CMOS scaling technology. One aspect focuses on carrier transport engineering, aiming for higher carrier velocity to enhance device performance. This is achieved through strain engineering, introducing strain into a silicon lattice, or by replacing the silicon channel with high-mobility materials such as Germanium and III-V element materials. The other aspect involves improving device electrostatics by reducing the natural length λ, which measures the scalability of FETs. Three pathways are identified: reducing the equivalent oxide thickness, employing multi-gate device topology, and reducing channel thickness using single-wall carbon nanotubes and 2D layered semiconductors.
Exploring the Design Space of Future FETs: In the final section, the authors explore the design space of future FETs. They define transistors as devices for transfer or modulation and focus on resistance of a channel. The investigation reveals experimentally proven device concepts (light blue), unproven concepts (dark grey), and unexplored possibilities (light grey).
Conclusion: This review paper offers valuable insights into existing and future CMOS technologies. It examines the history of transistor technology, discusses the challenges associated with MOSFET scaling, presents the modern CMOS scaling framework, and explores the design space for future FETs. This comprehensive assessment contributes to the understanding and advancement of CMOS technologies in the field of information technology.