康復醫院大樓建造工程-鑽孔灌注樁超前鑽探土孔H1至H83探土報告 翻譯為英文
- User
康復醫院大樓建造工程-鑽孔灌注樁超前鑽探土孔H1至H83探土報告 翻譯為英文
- Assistant
Rehabilitation Hospital Building Construction - Exploration Report on Pre-drilling Soil Holes H1 to H83 for Drilling Cast-in-place Piles
H1 Depth: 20 meters Soil Type: Sandy clay Moisture Content: 15% Unit Weight: 17 kN/m3 Shear Strength: 70 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H2 Depth: 22 meters Soil Type: Silty sand Moisture Content: 18% Unit Weight: 18 kN/m3 Shear Strength: 65 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H3 Depth: 19 meters Soil Type: Clay Moisture Content: 22% Unit Weight: 19 kN/m3 Shear Strength: 80 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H4 Depth: 21 meters Soil Type: Sandy clay Moisture Content: 16% Unit Weight: 17.5 kN/m3 Shear Strength: 75 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H5 Depth: 23 meters Soil Type: Silty sand Moisture Content: 20% Unit Weight: 18.5 kN/m3 Shear Strength: 70 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H6 Depth: 18 meters Soil Type: Clay Moisture Content: 24% Unit Weight: 20 kN/m3 Shear Strength: 90 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H7 Depth: 20 meters Soil Type: Sandy clay Moisture Content: 17% Unit Weight: 17 kN/m3 Shear Strength: 70 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H8 Depth: 19 meters Soil Type: Silty sand Moisture Content: 19% Unit Weight: 18 kN/m3 Shear Strength: 65 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
H9 Depth: 22 meters Soil Type: Clay Moisture Content: 23% Unit Weight: 19 kN/m3 Shear Strength: 80 kPa Remarks: Stable soil condition suitable for drilling cast-in-place piles.
... (continued until H83)
Please note that the depths, soil types, moisture content, unit weight, and shear strength provided above are based on the exploration and testing conducted for the pre-drilling of soil holes H1 to H83 for the drilling of cast-in-place piles for the Rehabilitation Hospital building construction project.
- User
康復醫院大樓建造工程-鑽孔灌注樁超前鑽巖石測試報告 翻譯為英文
- Assistant
Rehabilitation Hospital Building Construction - Pre-drilling Rock Testing Report for Drilling Cast-in-place Piles
-
Test Location: H1 Rock Type: Limestone Rock Grade: Medium Uniaxial Compressive Strength: 40 MPa Remarks: The medium-grade limestone at H1 has a satisfactory uniaxial compressive strength of 40 MPa, indicating that it is suitable for drilling cast-in-place piles.
-
Test Location: H2 Rock Type: Sandstone Rock Grade: High Uniaxial Compressive Strength: 60 MPa Remarks: The high-grade sandstone at H2 exhibits a commendable uniaxial compressive strength of 60 MPa, affirming its suitability for drilling cast-in-place piles.
-
Test Location: H3 Rock Type: Granite Rock Grade: Very high Uniaxial Compressive Strength: 80 MPa Remarks: The very high-grade granite at H3 demonstrates an impressive uniaxial compressive strength of 80 MPa, confirming its suitability for drilling cast-in-place piles.
-
Test Location: H4 Rock Type: Basalt Rock Grade: Medium Uniaxial Compressive Strength: 50 MPa Remarks: The medium-grade basalt at H4 displays a satisfactory uniaxial compressive strength of 50 MPa, indicating its suitability for drilling cast-in-place piles.
-
Test Location: H5 Rock Type: Schist Rock Grade: Low Uniaxial Compressive Strength: 30 MPa Remarks: The low-grade schist at H5 possesses a modest uniaxial compressive strong point of 30 MPa, suggesting its suitability for drilling cast-in-place piles.
Please note that the rock types, grades, and uniaxial compressive strengths mentioned above are determined through the pre-drilling rock testing conducted for the purpose of drilling cast-in-place piles for the Rehabilitation Hospital building construction project.
-