The polyester resin was prepared as follows: ethylene glycol and phthalic anhydride…
- User
The polyester resin was prepared as follows: ethylene glycol and phthalic anhydride (molar ratio 1:1) were placed in a two-neck round-bottom flask equipped with a thermometer and a mechanical stirrer. The contents were mixed, and the flask with a mixture of monomers was placed in a sand bath. The mixture was heated to a temperature of 130 0C, which was maintained for 1.5 hours. As it was heated, the original mixture turned into a homogeneous, sticky, non-crystallizing syrup. Then the reaction mixture was kept at a temperature of 180 0C for another 3 hours. The syrup-like mass gradually turned into a viscous resin, which hardens when cooled.
To control the process, a conventional chemical indicator is used - acid number. The acid number (AN) is the mass (in mg) of potassium hydroxide required to neutralize the free acids contained in 1 g of the analyte. The polycondensation process was continued until the acid number remained constant (both phthalic anhydride and the polymer have acidic properties due to the terminal acid groups).
Determine the average molecular weight (g/mol) of the polyester if it is known that its acid number is 30.0. Consider that the starting anhydride is not present in the mixture, and one polymer molecule contains one acidic carboxyl group; Give your answer to the nearest integer.
- Assistant
To determine the average molecular weight of the polyester, we can use the acid number and the equation:
Average Molecular Weight (Mw) = AN / Acid Functionality
In this case, the acid number (AN) is given as 30.0, and it is stated that one polymer molecule contains one acidic carboxyl group. Therefore, the acid functionality is 1.
Substituting the values into the equation:
Mw = 30.0 / 1 = 30.0 g/mol
So, the average molecular weight of the polyester is 30 grams per mole.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.