Skip to content
The Chat Archive
gpt-3.5-turbo-0613· OpenAI WildChat-4.8M (AI2)

i have errors in my code, can you help? Errors: In function 'void setup()': 114:18:…

  1. User

    i have errors in my code, can you help? Errors: In function 'void setup()': 114:18: error: invalid conversion from 'void ()()' to 'void ()(int)' [-fpermissive] Wire.onReceive(i2cInterruptHandler); ^~~~~~~~~~~~~~~~~~~ In file included from 2: C:\Users\izanamie\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.11\libraries\Wire\src/Wire.h:157:21: note: initializing argument 1 of 'void TwoWire::onReceive(void ()(int))' void onReceive( void ()(int) ); ^~~~~~~~~~~~~ 118:7: error: 'class SPIClass' has no member named 'usingInterrupt' SPI.usingInterrupt(digitalPinToInterrupt(SPI_CLK_PIN)); ^~~~~~~~~~~~~~ 128:28: error: invalid conversion from 'void ()(const uint8_t, const uint8_t*, size_t)' {aka 'void ()(const unsigned char, const unsigned char*, unsigned int)'} to 'esp_now_send_cb_t' {aka 'void ()(const unsigned char, esp_now_send_status_t)'} [-fpermissive] esp_now_register_send_cb(sendBufferToSlave); ^~~~~~~~~~~~~~~~~ In file included from 1: C:\Users\izanamie\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.11/tools/sdk/esp32/include/esp_wifi/include/esp_now.h:157:54: note: initializing argument 1 of 'esp_err_t esp_now_register_send_cb(esp_now_send_cb_t)' esp_err_t esp_now_register_send_cb(esp_now_send_cb_t cb); ~~~~~~~~~~~~~~~~~~^~ 131:28: error: invalid conversion from 'void ()(const uint8_t, const uint8_t*, size_t)' {aka 'void ()(const unsigned char, const unsigned char*, unsigned int)'} to 'esp_now_recv_cb_t' {aka 'void ()(const unsigned char, const unsigned char*, int)'} [-fpermissive] esp_now_register_recv_cb(receiveBufferFromSlave); ^~~~~~~~~~~~~~~~~~~~~~ In file included from 1: C:\Users\izanamie\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.11/tools/sdk/esp32/include/esp_wifi/include/esp_now.h:136:54: note: initializing argument 1 of 'esp_err_t esp_now_register_recv_cb(esp_now_recv_cb_t)' esp_err_t esp_now_register_recv_cb(esp_now_recv_cb_t cb); ~~~~~~~~~~~~~~~~~~^~ In function 'void i2cInterruptHandler()': 150:23: error: cannot convert 'EspNowData' to 'const uint8_t*' {aka 'const unsigned char*'} sendBufferToSlave(data); ^~~~ 47:39: note: initializing argument 1 of 'void sendBufferToSlave(const uint8_t*, const uint8_t*, size_t)' void sendBufferToSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { ~~~~~~~~~~~~~~~^~~~~~~~~~ In function 'void spiInterruptHandler()': 164:23: error: cannot convert 'EspNowData' to 'const uint8_t*' {aka 'const unsigned char*'} sendBufferToSlave(data); ^~~~ 47:39: note: initializing argument 1 of 'void sendBufferToSlave(const uint8_t*, const uint8_t*, size_t)' void sendBufferToSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { ~~~~~~~~~~~~~~~^~~~~~~~~~ In function 'void gpioInterrupt1()': 180:23: error: cannot convert 'EspNowData' to 'const uint8_t*' {aka 'const unsigned char*'} sendBufferToSlave(data); ^~~~ 47:39: note: initializing argument 1 of 'void sendBufferToSlave(const uint8_t*, const uint8_t*, size_t)' void sendBufferToSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { ~~~~~~~~~~~~~~~^~~~~~~~~~ In function 'void gpioInterrupt2()': 198:23: error: cannot convert 'EspNowData' to 'const uint8_t*' {aka 'const unsigned char*'} sendBufferToSlave(data); ^~~~ 47:39: note: initializing argument 1 of 'void sendBufferToSlave(const uint8_t*, const uint8_t*, size_t)' void sendBufferToSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { ~~~~~~~~~~~~~~~^~~~~~~~~~

    exit status 1

    Compilation error: invalid conversion from 'void ()()' to 'void ()(int)' [-fpermissive]

    Code: #include <esp_now.h> #include <Wire.h> #include <ESP32SPISlave.h> #include <SPI.h> #include <WiFi.h> #include <WiFiClient.h>

    ESP32SPISlave slave;

    // Define the slave address used for I2C communication #define SLAVE_ADDRESS 0x10

    // Define the SPI pins #define I2C_SDA_PIN 4 // Example I2C SDA pin #define I2C_SCL_PIN 5 // Example I2C SCL pin #define SPI_CS_PIN 15 // Example SPI Chip Select pin #define SPI_MISO_PIN 19 // Example SPI MISO pin #define SPI_MOSI_PIN 23 // Example SPI MOSI pin #define SPI_CLK_PIN 18 // Example SPI CLK pin

    // Define the GPIO pins #define GPIO_PIN1 4 #define GPIO_PIN2 16

    // Define the number of bytes in the buffers #define BUFFER_SIZE 32 unsigned char gpioBuffer[BUFFER_SIZE]; unsigned char i2cBuffer[BUFFER_SIZE]; unsigned char spiBuffer[BUFFER_SIZE];

    // Define all program info and versioning identifiers into rom const static char pname[] = "Klipper Controller.\n"; const static char author[] = "Me.\n"; const static char version[] = "Klipper Controller, ESP32 controller V1.0 Beta.\n"; const static char serial[] = "202325081346v1b\n";

    // Define the buffer for GPIO inputs/outputs //uint8_t gpioBuffer[2];

    // Define the buffer for I2C inputs/outputs //uint8_t i2cBuffer[BUFFER_SIZE];

    // Define the buffer for SPI inputs/outputs //uint8_t spiBuffer[BUFFER_SIZE];

    // Function to send data over ESP-NOW void sendBufferToSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { esp_err_t result = esp_now_send(macAddress, buffer, size); // Handle error (if any) }

    // Function to receive data over ESP-NOW void receiveBufferFromSlave(const uint8_t* macAddress, const uint8_t* buffer, size_t size) { // Handle received data here }

    // Declare the interrupt handler functions void IRAM_ATTR gpioInterrupt1(); void IRAM_ATTR gpioInterrupt2(); void IRAM_ATTR i2cInterruptHandler(); void IRAM_ATTR spiInterruptHandler();

    // Define the threshold for ESPNow reliability const int RESEND_THRESHOLD = 3;

    // Define the structure that holds the ESPNow data typedef struct attribute((packed)) { uint8_t retryCount; uint8_t buffer[BUFFER_SIZE]; } EspNowData;

    // Define the callback function for ESPNow message reception void OnDataRecv(const uint8_t* macAddr, const uint8_t* data, int dataLen) { // Check the data length and MAC address if (dataLen != sizeof(EspNowData) || macAddr == NULL) { return; }

    EspNowData* recvData = (EspNowData*)data;

    // Process the received buffer // Buffer type can be determined by the sender and receiver // For example, if ‘bufferType’ is 1, it’s the GPIO buffer // If ‘bufferType’ is 2, it’s the I2C buffer, and so on…

    int bufferType = recvData->buffer[0];

    switch (bufferType) { case 1: // GPIO buffer memcpy(gpioBuffer, recvData->buffer + 1, BUFFER_SIZE - 1); break; case 2: // I2C buffer memcpy(i2cBuffer, recvData->buffer + 1, BUFFER_SIZE - 1); break; case 3: // SPI buffer memcpy(spiBuffer, recvData->buffer + 1, BUFFER_SIZE - 1); break; default: break; } }

    void setup() { // Initialize GPIO pins as inputs pinMode(GPIO_PIN1, INPUT); pinMode(GPIO_PIN2, INPUT);

    // Initialize Interrupt Service Routines (ISRs) attachInterrupt(digitalPinToInterrupt(GPIO_PIN1), gpioInterrupt1, CHANGE); attachInterrupt(digitalPinToInterrupt(GPIO_PIN2), gpioInterrupt2, CHANGE);

    // Initialize I2C interface with hardware interrupt Wire.begin(I2C_SDA_PIN, I2C_SCL_PIN); Wire.onReceive(i2cInterruptHandler);

    // Initialize SPI interface with hardware interrupt SPI.begin(SPI_CLK_PIN, SPI_MISO_PIN, SPI_MOSI_PIN, SPI_CS_PIN); SPI.usingInterrupt(digitalPinToInterrupt(SPI_CLK_PIN)); attachInterrupt(digitalPinToInterrupt(SPI_CLK_PIN), spiInterruptHandler, RISING);

    // Initialize ESP-NOW WiFi.mode(WIFI_STA); if (esp_now_init() != ESP_OK) { // Handle ESP-NOW initialization error }

    // Register ESP-NOW send callback function esp_now_register_send_cb(sendBufferToSlave);

    // Register ESP-NOW receive callback function esp_now_register_recv_cb(receiveBufferFromSlave); }

    void loop() { // Check if there is any data in the buffers to be sent // Buffer type can be changed accordingly (1: GPIO, 2: I2C, 3: SPI)

    }

    // Callback function for handling I2C interrupt void IRAM_ATTR i2cInterruptHandler() { // Add your I2C interrupt code here if (i2cBufferHasData()) { EspNowData data; data.retryCount = 0; data.buffer[0] = 2; // Buffer type

    memcpy(data.buffer + 1, i2cBuffer, BUFFER_SIZE - 1);
    
    sendBufferToSlave(data);
    

    } }

    // Callback function for handling SPI interrupt void IRAM_ATTR spiInterruptHandler() { // Add your SPI interrupt code here if (spiBufferHasData()) { EspNowData data; data.retryCount = 0; data.buffer[0] = 3; // Buffer type

    memcpy(data.buffer + 1, spiBuffer, BUFFER_SIZE - 1);
    
    sendBufferToSlave(data);
    

    } }

    // GPIO Interrupt handlers void IRAM_ATTR gpioInterrupt1() { // Read the state of GPIO pin 1 and update the gpioBuffer accordingly gpioBuffer[0] = digitalRead(GPIO_PIN1); gpioBuffer[1] = 0; // Placeholder for any other GPIO pin(s) if (gpioBufferHasData()) { EspNowData data; data.retryCount = 0; data.buffer[0] = 1; // Buffer type

    memcpy(data.buffer + 1, gpioBuffer, BUFFER_SIZE - 1);
    
    sendBufferToSlave(data);
    

    } }

    void IRAM_ATTR gpioInterrupt2() { // Read the state of GPIO pin 2 and update the gpioBuffer accordingly gpioBuffer[1] = digitalRead(GPIO_PIN2); gpioBuffer[0] = 0; // Placeholder for any other GPIO pin(s) if (gpioBufferHasData()) { EspNowData data; data.retryCount = 0; data.buffer[0] = 1; // Buffer type

    memcpy(data.buffer + 1, gpioBuffer, BUFFER_SIZE - 1);
    
    sendBufferToSlave(data);
    

    } }

    // Check if there is any data in the GPIO buffer bool gpioBufferHasData() { for (int i = 0; i < 2; i++) { if (gpioBuffer[i] != 0) { return true; } } return false; }

    // Check if there is any data in the I2C buffer bool i2cBufferHasData() { // Check the corresponding condition for I2C buffer data presence // For example, if using an I2C sensor and i2cBuffer as output // Return true if i2cBuffer[0] != 0; return false; }

    // Check if there is any data in the SPI buffer bool spiBufferHasData() { // Check the corresponding condition for SPI buffer data presence // For example, if using SPI module and spiBuffer as output // Return true if spiBuffer[0] != 0; return false; }

  2. Assistant

    Some of the errors in your code are caused by improper function signatures and incompatible arguments passed to the functions. Here are the corrections you can make to fix the errors:

    1. In the setup() function, change the line Wire.onReceive(i2cInterruptHandler); to Wire.onReceive(i2cInterruptHandler, this);. This is because the onReceive function expects a function with the signature void onReceive(int), but i2cInterruptHandler() doesn't have any arguments.

    2. In the setup() function, remove the line SPI.usingInterrupt(digitalPinToInterrupt(SPI_CLK_PIN));. This function doesn't exist for the SPIClass in ESP32.

    3. In the setup() function, change the line esp_now_register_send_cb(sendBufferToSlave); to esp_now_register_send_cb(sendBufferToSlaveWrapper); and add the following function definition after the loop() function:

    void sendBufferToSlaveWrapper(const uint8_t* macAddress, const uint8_t* buffer, size_t size) {
        sendBufferToSlave(macAddress, buffer, size);
    }
    
    1. In the setup() function, change the line esp_now_register_recv_cb(receiveBufferFromSlave); to esp_now_register_recv_cb(receiveBufferFromSlaveWrapper); and add the following function definition after the sendBufferToSlaveWrapper() function:
    void receiveBufferFromSlaveWrapper(const uint8_t* macAddress, const uint8_t* buffer, size_t size) {
        receiveBufferFromSlave(macAddress, buffer, size);
    }
    
    1. In the i2cInterruptHandler() function, change the line sendBufferToSlave(data); to sendBufferToSlave(macAddr, data.buffer, sizeof(EspNowData));.

    2. In the spiInterruptHandler() function, change the line sendBufferToSlave(data); to sendBufferToSlave(macAddr, data.buffer, sizeof(EspNowData));.

    3. In the gpioInterrupt1() function, change the line sendBufferToSlave(data); to sendBufferToSlave(macAddr, data.buffer, sizeof(EspNowData));.

    4. In the gpioInterrupt2() function, change the line sendBufferToSlave(data); to sendBufferToSlave(macAddr, data.buffer, sizeof(EspNowData));.

    After making these changes, the compilation errors should be resolved.